Electrical and Electronics Commons^™

Error Detection And Correction In Compressed Data, Nadir Sezgin

Theses

Encoded data is very sensitive to the channel errors. Especially if the data is compressed by Arithmetic Encoding procedure, then the error propagation is very high. The error propagation in Arithmetic Coding is studied. Exploiting the high error propagation property when compressing data by Arithmetic encoding procedure, two different algorithms have been proposed for error detection and correction. Under certain conditions these algorithms detect and with a very high probability correct the errors introduced to the compressed data.

Software Development For Analysis Of Stochastic Petri Nets Using Transfer Functions, Aman U. Jamwal

Theses

This thesis research is an implementation of a closed-form analytical technique for study, evaluation and analysis of Stochastic Petri Nets (SPN). The technique is based on a theorem that an isomorphism exists between an SPN and a Markov Chain. The procedure comprises five main steps: reachability graph generation of the underlying Petri net, transformation of the reachability graph to a state machine Petri net, calculation of transfer functions, computation of equivalent transfer functions via Mason's rule, and computation of performance parameters of the SPN model from the equivalent transfer functions and their derivatives. The software is developed in UNIX using …

Conditional Artificial Dielectrics ; Fabry-Perot Etalon, Ling-Yi Hu

Theses

Fabry-Perot etalons are optical resonators comprise of two mirrors and a spacer layer. By embedding a thin, photo-sensitive layer ( Conditional Artificial Dielectric - CAD layer ) in the middle of the spacer layer, we were able to photo-control the transmission properties of a Fabry-Perot etalon. Different structures have been analyzed and measured to find that a change of .01 was photo-activated in the refractive index of the Conditional Artificial Dielectric layer.

A Graphical Tool For The Simulation Of Timed Petri Nets, Javaid Aslam Siddiqi

Theses

A highly interactive graphical tool is developed for the drawing and simulation of discrete event systems involving time constraints. The Timed Petri Net Simulator tool (TPNS) is capable of simulating systems with deterministic and stochastic delays. Performance and utilization parameters are collected during simulation for behavior and analysis purposes. Simulation results are stored in different files (log, verify, utilize, and mark). Conflict resolution on the basis of priority or random selection of multiple transitions in conflict is implemented to handle complex modeling situations. A user friendly interface is developed for effective interaction between the tool and the user. This interface …

A Color Petri Net Simulation Tool, Sanjaykumar V. Desai

Theses

A user friendly, modular and highly interactive graphical tool for drawing, editing and simulating color Petri nets is developed. The tool is designed to model concurrent and interlocked systems, such as flexible manufacturing systems, communication protocols and computer systems. A Color Petri Net(CPN) has a more concise graphical system representation than a standard Petri net, because net entities in CPN carry information. The CPNS(Color Petri Net Simulation) tool simulates a net having conflicts, reveals deadlocks, and creates a log file with the state history of the system yielding performance measures.

Canmol : Expert System In Medicine, Kulin Hemani

Theses

The intriguing words for the nineteen nineties are "Expert Systems", and "Artificial Intelligence". To a layman these terms conjure up thoughts of spaceships and futuristic beings. In reality they exemplify man's capability to harness technology.

Expert systems are computer software programs that make use of previously accumulated knowledge to assist in solving complex problems.

In recent years the practice of medicine has changed dramatically from a fundamentally individually deductive approach to an Artificial Intelligence based science. The modern physician no longer draws conclusions simply by examining the patient. Today the physician employs sophisticated computer based diagnostic tools to generate a …

Direct Recovering Of Surface Structure Characterized By An Nth Degree Polynomial Equation Using The Uoff Approach, Mazen A. Salhi

Theses

There are two different approaches for estimation of structure and/or motion of objects in the computer vision community today. One is the feature correspondence method, and the other is the optical flow method [1]. There are many difficulties and limitations encountered with the feature correspondence method, while the optical flow method is more feasible, but requires a substantial amount of extra calculations if the optical flow is to be computed as an intermediate step.

Direct methods have been developed [2-4], that use the optical flow approach, but avoid computing the full optical flow field as an intermediate step for recovering …

Broadband Isdn Control Using Neural Networks, Stavros Zervoudakis

Theses

Broadband Integrated Services Digital Networks (B-ISDN) are considered to become the standard communications networks in the near future. Major research efford is being applied in determining the appropriate mode of operation for B-ISDN systems. Two proposals, the Synchronous Transfer Mode (STM) and the Asynchronous Transfer Mode (ATM) claim to best fit the B-ISDN transmission requirements individually. A new method for B-ISDN traffic control is proposed in this paper. This method assigns priority levels to incoming traffic while integrating STM with ATM. A neural network is used to decide how the multiplexing of the incoming packets will be performed. Several traffic …

Delay Performance Of Cebus And Modified Cebus Schemes, Altaf Hussain

Theses

In this thesis the performance of the CEBUS (Consumer Electronics Bus), a local area network proposed by the Electronics Industries Association for the 'Smart House,' is analyzed under varying network load and traffic patterns that would occur in a typical home environment. Reduced complexity versions of the CEBUS scheme are compared with the standard CEBUS scheme.

It was found from simulation analysis that the delay in the CEBUS network, at a given network bandwidth, is dependent upon the message priority and the traffic pattern in the network. It was also observed that the performance of a modified CEBUS scheme was …

Knowledge Based Designing Of Broadband Coaxial Cable Networks, Tauqir Hameed

Theses

The objective of this research was to build a broadband coaxial cable network. One of the basic requirement of a network is the physical link transmission medium. For the purposes of this research, broadband coaxial cable was chosen as a physical medium of data communication. The approach taken in this research was to divide network design into three main steps. In the first step, the decision on topology of the network was determined. Both Star and Minimum Spanning Tree topologies were used and then the Esau-Williams Algorithm was employed to minimize the cable length. In the second step, various signal …

Radiation From The Cylindrical Dielectric Taper, Tor-Odd Hoydal

Theses

The radiation problem of the cylindrical dielectric taper, excited by the HE₁₁ dominant mode, is studied. A theoretical model and a numerical investigation into the radiation characteristics of such a tapered structure are presented. The model is based upon the combination of the exact modal field solutions for a step profile cylindrical dielectric waveguide, Local Mode Theory, and the Equivalence Principle for the determination of equivalent current densities.

The far-zone radiation field is considered to be the summation of the fields produced by two radiative components in the dielectric rod/conical structure: The "aperture" of the uniform dielectric rod at …

Performance Of The Extended Token Bus Network With Asymmetric Load Distribution, Hong Lin

Theses

The Token Bus, IEEE 802.4, provides high priority message options. The delay of high priority messages becomes an important criterion in the design and management of computer communication networks. A goal of the protocol is to allocate sufficient bandwidth and frequency of access to minimize of the high priority message delay. In this study, a simulation model of a priority based network, consisting of two token bus networks interconnected by a bridge is implemented. The load distribution among stations is asymmetric and the messages are divided into two priorities, high and low. Both fixed and variable token token holding times …

Graded Buried Channel Charge Coupled Device Design, Zengjing Wu

Theses

A process and device simulation study has been made to optimize a new type of buried channel CCD (BCCD) structure to be referred to as Graded BCCD (GBCCD) whose buried channel is formed by multiple implantations for achieving higher charge transfer efficiency. The 2-D process simulation tool SUPREM4 and 2-D device simulation tool PISCES2 were used in this research. The simulation results of the GBCCD with double channel implants are compared with the previously obtained experimental results.

Triple channel implants under the conditions of various process parameters were also simulated and the optimized case was chosen on the base of …

Mobile Manipulator Path Planning By A Genetic Algorithm, Min Zhao

Theses

The thesis addresses the path planning problem for a mobile manipulator system which is used to perform a sequence of tasks specified by locations and minimum oriented force capabilities. The problem is to find an optimal sequence of base positions and manipulator configurations for performing a sequence of tasks given a series of task specifications. The formulation of the problem is nonlinear. The feasible regions for the problem are nonconvex and unconnected. Genetic algorithms applied to such problems appear to be very promising while traditional optimization methods cause difficulties. Computer simulation is carried out on a three degrees-of-freedom manipulator mounted …

Measurement Of The Electrical And Optical Properties Of Thermid Polymide, Zhixiong Zhu

Theses

Electrical and optical properties of spin-coated THERMID polyimide EL-5010 have been studied and evaluated in this thesis. The D.C. bulk resistivities of 0.96^-2.56 μm thick samples were measured to be 10¹⁶ Ω-cm over the 27-160°C range using a test system consisting of Keithley 236 Source-Measure Unit. The bulk resistivity decreased to 2 x 10¹⁴Ω-cm at 200?C. The surface resistivity, 10¹⁵Ω/0 , and breakdown voltage, 350 V/pm, were also measured. The fixed charge concentration and mobile ion concentration in the THERMID polyimide EL-5010 insulator of a MIS capacitor structure were measured using a high …

The Performance Evaluation Of A New Neural Network Based Traffic Management Scheme For A Satellite Communication Network, Dequan Liu

Theses

The thesis describes a new neural network based traffic management scheme for a satellite communication network. The scheme consists of two levels of management. The front end of the scheme is a derivation of the Kohonen's self-organization model to configure maps for the satellite communication network dynamically, The model consists of three stages. The first stage is the pattern recognition task which selects an exemplar map that best meets the current network requirements. The second stage analyzes the discrepancy between the chosen exemplar map and the state of the network, and adaptively modifying the chosen exemplar map to conform closely …

Mobile Robot Path Planning Based On Hierarchical Hexagonal Decomposition, Dan Zheng

Theses

In this thesis, a new algorithm based on hierarchical cell decomposition and artificial potential field is developed to solve the find-path problem for a mobile robot. The basic cell structure used for decomposition is a hexagon. The artificial potential field is based on an attractive force from the goal position and repelling forces from the obstacles. Computer simulations of the algorithm for various obstacle scenarios are also presented.

Studies Of Electrical Properties Of Sio2 /Inp System, Milind S. Patel

Theses

Analyses of Electrical characteristics, of TilAu/SiO₂1InP structures, are presented here. The (MIS) Metal-Insulator- Semiconductor capacitors were fabricated with oxide thickness of 195nm, 420nm and 610nm respectively. The SiO₂ films were deposited on n-type Indium Phosphide(/nP) using Rapid Thermal Chemical Vapor Deposition (RTCVD). The characterization techniques employed in these experiments were (I-V) Current Voltage and High Frequency Capacitance Voltage (C-V) techniques. The electrical parameters obtained from the I-V and C-V measurements have been discussed here.

Electrical Characterization Of Preoxide Growth Fluorine Incorporated Thin Sio2 Films, Nilay J. Patel

Theses

Analyses of electrical characterization, of thin SiO₂ films grown on virgin and etched silicon surfaces, are presented here. The characterization techniques employed in these experiments are High Frequency Capacitance-Voltage (C-V), Capacitance-Time (C-T) & MOS Doping Profile and Static & Dynamic Current-Voltage (I-V) measurements. The structures, with areas ranging from 0.001-0.05 cm², used in this study are Al/Poly/SiO₂/Si/Al capacitors fabricated on virgin and C₂F₆ CHF₃ + He plasma exposed n-Si substrates. In this experiment, we have studied the effect of sacrificial oxidation. In this step, the oxide is thermally grown on the …

Mapping Hierarchical Structures Onto Hypercubes, Sandip C. Patel

Theses

Hierarchically structured arrays of processors are appropriate for low-level and intermediate-level image processing and computer vision. The most widely used structure is the pyramid. Neverthless, pyramid machines do not support the efficient implementation of the majority of scientific algorithms and their cost may become prohibitively high. In contrast, hypercube machines efficiently implement a wide variety of important algorithms due to the versatility of the underlying network. In fact, hypercube-based systems have become commercially available. The hypercube network supports both regular and irregular communications and it can efficiently simulate a variety of other structures like rings, trees, meshes, pyramids, etc. Thus, …

Efficient Multiprocessor Scheduling Based On Genetic Algorithms, Hong Ren

Theses

The problem of multiprocessor scheduling can be stated as finding a schedule for a general task graph to be executed on a multiprocessor system so that the schedule length can be minimized. This scheduling problem in known to be NP-hard and methods based on heuristic search have been proposed to obtain optimal and sub-optimal solutions to the problem. Genetic algorithms have recently received much attention as robust stochastic searching algorithms for various optimization problems. In this thesis, we propose an efficient method based on genetic algorithms to solve the multiprocessor scheduling problem. The representation of the search node will be …

A Microengineered Beam Diaphragm Structure For The High Performance Pressure Sensor, Alkesh Shah

Theses

The thesis details the design for a novel microengineered beam diaphragm structure for piezoresistive pressure sensor applications. The beam diaphragm structure is used as a pressure sensing device, within a Wheatstone bridge circuit. The single crystal silicon with [100] orientation is used for the beam diaphragm structure.

It has the advantages of high sensitivity(2.56 v/v/mm of Hg), good linearity(3Kpa to 1.4 Mpa) and overpressure protection with the help of the bosses. It's protection range is about 400 times the standard pressure range. The beam diaphragm structure has two rectangular bosses which are formed by anisotropic etching. Two pairs of diffused …

Simulation Study Of Signal Coupling For Monolithic Gaas 8-12 Micron Direct Injection Mqw Image Sensor, Lei Zhang

Theses

The simulation of signal coupling for a single pixel of a monolithic 8-12 micron GaAs/A1GaAs direct injection MQW infrared image sensor with 100% fill factor has been performed by using PISCES-IIB and PSPICE simulators. A vertical structure with the readout circuit built on the back of MQW was adopted for simulations. Both the static and transient characteristics were analyzed by simulation. The simulation was used to verify the doping profiles and device parameters for the n-GaAs MESFETs used in the read-out circuit.

The simulation result is as follow:

(1) A 900A thick p-GaAs (p=10¹⁶/cm3) substrate for GaAs MESFETs …

The Design And Testing Of A Personal Computer Controlled Scanning Acoustic Microscope For Orthopaedic Surgical Applications, Hubert Heinrich Berndt

Theses

This thesis describes scanning acoustic microscopy and ultrasonic image processing to characterize and evaluate materials of known properties, as well as novel materials. This work describes the assembly and testing of a PC based device for nondestructive evaluation of bone materials for usage in orthopaedics research. It includes the identification of some hardware problems and their solution, and it also describes different image processing techniques that have been developed and applied in this work. In a growing number of disciplines it has been discovered that an acoustic microscope can provide new information, especially about the elastic properties of specimens and …

Synthesis And Characterization Of Lpcvd Silicon Carbide Thin Films For X-Ray Lithography, Mahalingam Bhaskaran

Theses

Amorphous silicon carbide thin films were fabricated using low pressure chemical deposition method with a single liquid precursor, di tertiary butyl silane. The films were deposited for a temperature range of 500-850°C and at different pressures ranging from 0.05 to 1 torr. The growth rate of the films deposited at constant pressure of 0.2 torr with a flow rate of 60 sccm, was found to follow an Arrehenius Behavior in the temperature range of 600 - 675°C, yielding an activation energy of 32.5 k cal mol^-1 . IR spectroscopic study showed an absorption peak centered at 780 cm^{-1 …}

Electroretinogram Modeling : Parameter Identification And Intensity-Response Function Fits, Juan J. Castro

Theses

Electroretinography testing provides many useful techniques for clinical diagnosis of the visual system. However, the interpretation of the electroretinogram data involves a great amount of subjectivity. The use of mathematical models and parameter estimation techniques to fit the electroretinogram data supply a non-subjective and more standard way for analysis of the electroretinogram data. Mathematical models provide a way of summarizing the information enclosed in the raw electroretinogram response into a small set of parameters that define the response.

This thesis presents a mathematical model for the electroretinogram response due to light stimuli. It also provides a non-subjective method for obtaining …

A Mouse-Driven Interface For Androx Ics-400, Chin-Tien Chen

Theses

A mouse-driven interface is extremely useful for software performing image processing tasks. This thesis describes an implementation of a mouse-driven interface for the Androx ICS-400 image processing board. The Androx board is housed in a Sun 4/330 running a UNIX-based operating system. The main goal of this interface is to provide a consistent and friendly user interface for image processing tasks and integrating the Sun window libraries with the Androx libraries. Various image processing tasks, such as gray scale and binary morphological operations, histogram, thresholding, filtering, spot, logical operations, arithmetic operations, zooming, scrolling, rank and image acquisition are implemented in …

The Bandwidth Allocation Of Atm Control By Neural Networks, Jin-Syan Chou

Theses

In this thesis, we develop a neural network method based on Adaptive Resonance Theory to train and control the optimum bandwidth allocation of ATM network. In Broadband Integrated Service Digital Network (BISDN), the Asynchronous Transfer Mode (ATM) is already adopted as the transfer facility by CCITT. ATM is a high-bandwidth, low- delay, fast-packet switching and multiplexing technique. Using ATM technique, we can flexibly rearrange the network and reassign the bandwidth to meet the requirement of all types of services. As an effective optimization method, Genetic Algorithm (GA) is applied to implement the bandwidth allocation of ATM. Then, we use Adaptive …

Application Of Non-Imaging Optical Inspection To The Detection Of Pinhole Defects In Latex Condoms, Paul Micha Gelencser

Theses

An optical technique was demonstrated for the detection of pinhole defects in latex condoms. To evaluate the optical inspection concept, a prototype inspection apparatus was constructed. In order to maximize contrast between pinhole transmitted signal and optical signal transmitted through the latex condom material, ultraviolet (u.v.) light of wavelength 253nm has been used. This inspection was performed during rotation of the condom, with the light source inside the condom and the photomultiplier photodetector outside. The form on which the condoms were mounted was made of quartz in order to allow the u.v. light to be transmitted through it.

Background signal …

Representing Tolerances In A Geometric Modeller, Chih-Tsung Huang

Theses

Current geometric modeller contains dimension information only. This thesis describes how tolerance can be added to a geometric modeller. The modeller is based on a hybrid design of the Constructive Solid Geometry (CSG) scheme and Boundary Representation (B-Rep). Various tolerances based on the ANSI standard are considered.