Electrical and Electronics Commons^™

Magnetic Design Web Application, Michael Brim

Electrical Engineering

The automated Magnetic Design Web Application, available at http://www.magneticdesign.org, generates the full design process of a power transformer, gapped inductor and toroidal inductor given design specifications provided by the user. Calculations are accomplished using Area Product, Ap, or Core Geometry, Kg, procedures. All design processes mirror the format used in Dr. Taufik’s Introduction to Magnetic Design lecture-notes. An administrative backend is provided where instructors can add or modify core design values to expand the array of materials used. The project aims to aid student understanding of magnetic design and course concepts while allowing instructors to broaden the scope of material …

Analog Electric Guitar Distortion Effects And Headphone Amplification, Michael Alexander Jenkins

Electrical Engineering

The goal of this project was to create an electronic system which integrates popular audio processing effects as well as headphone amplification circuitry for use with an electric guitar. By implementing a system which fits natively inside the body of an electric guitar, the need for numerous external accessories relating to a standalone amplifier system is eliminated, improving device versatility and portability.

Single-Ended Tube-Based Guitar Amplifier, Joseph (Joe) Linn

Electrical Engineering

Since the advent of the transistor, the vast majority of designers and manufacturers of electronic devices have abandoned the vacuum tube. Compared to transistors, tubes are orders of magnitude larger, more power hungry, more expensive, less reliable, and dissipate much more heat. In short, transistors are superior devices for almost all applications. Despite this fact, many makers of high-end audio and instrument amplifiers continue to base their designs on tube technology.

Given all of their shortcomings, the obvious question is: Why bother with tubes? Proponents of tube-based audio amplifiers cite a certain “warmth” that tube circuitry lends to the sound …

The Design And Manufacture Of A Light Emitting Diode Package For General Lighting, Michael S. Krist

Master's Theses

Lighting technologies have evolved over the years to become higher quality, more efficient sources of light. LEDs are poised to become the market standard for general lighting because they are the most power efficient form of lighting and do not contain hazardous materials. Unfortunately, LEDs pose unique problems because advanced thermal management is required to remove the high heat fluxes generated by such relatively small devices. These problems have already been overcome with complex packaging and exotic materials, but high costs are preventing this technology from displacing current lighting technologies.

The purpose of this study is to develop a low-cost …

Intelligent Irrigation Zone Splitter, David Boeck

Electrical Engineering

The intelligent irrigation zone splitter allows easy expansion of an existing irrigation controller. To expand on an existing controller a new wire is needed to run between the controller and the valve. This path may be buried beneath driveways, patios, and sidewalks. The intelligent irrigation zone splitter uses an already existing wire path to control two valves and create a new watering zone. This controller uses timing and memory to split the total watering time of the zone.

Dual Axis Solar Tracker, Weston Sapia, Jason Birnie

Electrical Engineering

No abstract provided.

Swept-Frequency Sampled Grating Distributed Bragg Reflector Lasers Optimized For Optical Coherence Tomography Applications, Brandon J. George

Master's Theses

Swept Frequency Source Optical Coherence Tomography (OCT) requires high repetition rate and wide spectral width wavelength tunable sources at a low cost. The sampled grating distributed Bragg reflector (SG-DBR) laser provides wide wavelength tuning range while exhibiting a wavelength switching speed that is among the fastest currently available. The SG-DBR laser is used to generate linear frequency ramps with high repetition rates. Since the SG-DBR laser is currently used for the telecommunications industry in high volume, the price of the system is much lower than current OCT sources. Therefore the SG-DBR laser provides a practical solution for Swept Source OCT. …

High Contrast Grayscale Object Tracking Embedded System Design, Scott Donald Neally

Electrical Engineering

The purpose of this project is to prove that a real-time object-tracking camera can be implemented using the Digilent NEXYS board with Xilinx Platform Studio. With great ambition I set to implement the camera with RGB color tracking of bright green objects. This would make segmentation between the object of interest and its background much easier, allowing less stringent requirements on the background color beyond the object. Because of time restraints, the actual implementation remains as 8-bit grayscale, where the object of interest is intended to be white and highly contrasted from its black background. A simple algorithm is used …

Musicman Communications System, Dan Strengier

Electrical Engineering

The MusicMan portable music mixer is a solution for users who enjoy listening to music and would also like to communicate to friends on a walkie-talkie system. The MusicMan provides the user the ability to simultaneously listen to an MP3 player and operate a communications device, such as a walkie-talkie.

Punching Bag Trainer, Gian Delacruz

Electrical Engineering

Martial artists, such as boxers, kick boxers, and karate practitioners, use punching bags in training all the time to work on technique, speed and power but there hasn’t really been a good way to train reaction and combination speed (a combination is a string of strikes) without the aid of a training partner. Reaction and combination speed are important in competition because a faster competitor can attack successfully before his or her opponent has the time to react. This device aims to help martial artists increase reaction and combination speed through the use of randomly flashing targets attached to a …

Protected Ir Input System, Kevin Ersoy

Electrical Engineering

The result of this project is a product that may be used to apply a digital input to a system without physically touching a device. The combination of a modulated IR signal and reflective technology produces this remote actuation. The signal emitter should produce the modulated IR light, and the receiver should continuously wait for this signal to be received. If the IR signal should encounter an obstruction causing reflection at the appropriate distance, it will be reflected directly into the receiving device. This project may be extended to include multiple duplicate systems in proximity by transmitting a modulated digital …

Wireless Pedometer, Jeffrey Lease

Electrical Engineering

No abstract provided.

Psuedo-Randomly Controlled Analog Synthesizer, Jared Huntington

Electrical Engineering

The goal of this project was to design and build a portable box recreating classic sounds heard in science fiction films. These include sounds ranging from droning hums to bloops and bleeps. Currently no other device is made specifically for generating these sounds. The user controls and manipulates the sounds produced using a combination of switches and knobs to shape the sound generation. The sounds are generated using analog electronics. The project was successful in meeting the desired goal by designing and building a Randomizer, MIDI controller, VCO, LFO, VCA, Ring Modulator, and Fuzz Section. The resulting device is useful …

Switching Circuit For A Permanent Magnet Dc Motor, Alex Boatman

Electrical Engineering

The project is a circuit that will basically supply current from the battery to the different stator coils at opportune moments. With a hall-effect sensor on the shaft as a feedback to a microcontroller, I was able to toggle switches based on the position of the shaft at the moments where we would be using as little power as possible. The operation of the control circuit works similar to a stepper motor; it takes a signal from the microcontroller that is sent to some FET drivers, which in turn sends signals to the FETs to open or close as the …

Automated Basketball Return System, Victor Mendoza, Chris Chamberlain

Electrical Engineering

The project is meant to assist a basketball player in their practicing. The project hangs directly on the basketball rim and automatically rotates to find the player on the court. Once the player is detected, the automated basketball return system (ABRS) stays focused in the direction of the player so that any baskets successfully made will be funneled back to the player. When the player moves from center, IR motion detectors find which direction you moved to and rotates accordingly, until the player is focused in front of the funnel again. If at any time the player is absent from …

Dc-Dc Converter For Harvesting Energy From An Exercise Bike, Henry Ureh, Chris Henry

Electrical Engineering

Create an efficient buck-boost converter that adapts to input voltage range from ~3.8V to 70V, and outputs 13.7V DC, the voltage required by a charge controller to charge a battery. The energy stored in the battery will be supplied back to the grid.

The cost of energy saved by the converter should eventually cover the initial price of the converter. The converter should help reduce the net power consumption of the exercise machines used in the Cal Poly gym

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier

Master's Theses

Rapid battery exchange systems were built for an electric van and pedal assist electric bike as a method of eliminating the need to recharge the vehicles batteries in order to increase the feasibility of using electric propulsion as a method of efficient student transportation. After selecting proper materials it was found that the systems would need a protective coating to ensure consistent operation. 1020 cold rolled steel samples coated with multiple thicknesses of vinyl resin paint, epoxy resin paint, and powder coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective …

Analysis & Design Of Improved Multiphase Interleaving Dc-Dc Converter With Input-Output Bypass Capacitor, Rudi Rudianto

Master's Theses

As the transistor count per chip in computer microprocessors surpasses one billion, the semiconductor industry has become more and more concerned with meeting processor’s power requirements. This poses a design challenge for the power supply module, especially when the processor operates at low voltage range. For example, the electrical requirement for the newest Intel microprocessors has exceeded 100A with an input voltage of approximately 1V. To overcome this problem, multiphase DC-to-DC converters encased in a voltage regulator module (VRM) have become the standard means of supplying power to computer microprocessor.

This study proposes a new topology for the multiphase DC-to-DC …

Analysis And Design Of Continuous Input Current Multiphase Interleaved Buck Converter, Sean Michael Zich

Master's Theses

The power requirements for microprocessors have been increasing per Moore's Law. According to International Technology Roadmap (ITRS), Voltage Regulator Module (VRM) for microprocessors will be about 200 W at 1 V output in 2010. With the VRM’s topology of synchronous buck, serious technical challenges such as small duty cycle, high switching frequencies, and higher current demands, contribute to decreased power density and increased cost.

This thesis proposes a Continuous Input Current Multiphase Interleaved Buck topology to solve the technical challenges of powering future microprocessors. This new topology is aimed to improve past topologies by providing continuous input current and improved …

Analysis And Design Of Interleaving Multiphase Dc-To-Dc Converter With Input Lc Filter, Kevin Thomas Delrosso

Master's Theses

The future of microprocessors is unknown. Over the past 40 years, their historical trend has been for adopting smaller and more powerful designs that drive the world that we live in today. The state of the microprocessor business today faces a crossroad, wishing to continue on the historical trend of doubling the number of transistors on a chip every 18 months (Moore’s Law) but also facing the realistic task of needing to power these sophisticated devices. With the low voltages and high currents that are required for these microprocessors to operate, it poses a difficult task for the future designers …