Electrical and Electronics Commons^™

Spy Bot, Nathanael Bruce Farris

Computer Engineering

This project set out to develop a compact, mobile-controlled robotic platform designed for remote video surveillance and control via a smartphone. Using a Raspberry Pi as the core controller, the robot integrates a Flask-based server, HTML/JavaScript-based user interface, and an infrared-capable camera to provide real-time video streaming and directional control through a web browser. Key design challenges included managing power delivery, integrating motor control with live video, and modernizing web technologies to ensure smooth communication between client and server. The final system demonstrates a responsive and portable proof of concept that highlights the potential for future upgrades, such as night …

Study On The Application Of Smart Electric Meters For Secondary Voltage Protection, Jayaditya Sisodia

Master's Theses

The purpose of our research is to utilize PG&E’s Smart Meters installed across California to protect the Secondary Voltage delivered to the meter. This means detecting electrical faults between the utility’s distribution transformer and the installed Smart Meter. Our goal is to propose and implement various solutions through additional devices and protocols to detect and prevent these faults, communicate them with the meter, and forward fault information to the utility. A device will be designed to be installed on the transformer, detect faults, shut off power transmission, and communicate to the meter via fiber optic cable. Research will then be …

Design, Analysis, And Implementation Of An Improved Zero Voltage Switching Hybrid Voltage Divider, Luke V. Cerda

Master's Theses

This thesis entails the study, design, and construction of a novel DC-DC converter topology, the Zero Voltage Switching Hybrid Voltage Divider (ZVS-HVD), with improved modularization, optimization, and compactness. The ZVS-HVD facilitates higher load currents and accomplishes DC-DC voltage division through switching inductors and capacitors. Low switching loss is achieved through zero voltage switching (ZVS) and the use of GANFET switches. An analysis of duty cycle and high-frequency operation is conducted, enabling 1 MHz switching and improvements in output voltage ripple, voltage drooping, board size, and efficiency at higher load currents. Two versions of ZVS-HVD prototypes were constructed with on-board signal …

Development Of A Versatile Switching Mode Inverter Laboratory Module, Zachariah Lee Mustar

Master's Theses

DC-AC converters, or inverters, are complex devices that play an essential role in photovoltaic, energy storage, and microgrid systems. Therefore, they constitute a class of power electronics that any power-focused electrical engineering student should be familiar with. This thesis presents the development and testing of a single device that power electronics students will use in a laboratory setting to experiment with each of the four different switching techniques employed in inverters: a simple square wave (SSWI), modified square wave (MSWI), bipolar PWM, and unipolar PWM. The module was built with a physically modifiable control stage and a power stage constituting …

Single-Sideband Pulse Width Modulation For Parametric Acoustic Arrays, Douglas Liu

Master's Theses

Parametric acoustic arrays are directional loudspeakers that operate using ultrasonic carriers to project sound within a narrow beam. Input audio is first modulated onto an ultrasonic carrier and transmitted through air, where it self-demodulates into audible frequencies in the far field.

This thesis introduces a method for preprocessing audio into scaled quadrature signals using a passive analog polyphase filter. These signals are modulated using microcontroller-generated waveforms to create quadrature ultrasonic pulse-width modulation (PWM) signals. The modulated outputs are combined through a wired-OR summer, producing single-sideband ultrasonic content at the desired frequency of 40 kHz. This signal is amplified through high-efficiency …

High-Frequency Current And Voltage Sensing Buck Converter Compatible With Model Predictive Control, Cathy G. Chen, Lani K. Nguyen

Electrical Engineering

This paper presents the design and implementation of a high-frequency buck converter operating at 1 MHz, integrated with voltage and current sensing capabilities for enhanced output regulation. The primary objective is to minimize transient dips in output voltage commonly observed during load disturbances or switching events. The converter design is intended to be compatible with a Digitally Assisted Analog Computing Circuit (DAACC) for real-time model predictive control (MPC), which leverages fast analog elements with programmable digital components to solve a penalty-based reformulation of the quadratic optimization problem underlying conventional MPC.

Piezoelectric Actuator Driver System, Daniel Hoefer

Electrical Engineering

This work presents the design, fabrication, and testing of a high-voltage piezoelectric actuator driver system purposed for integration into defense and aerospace precision motion control applications, particularly those in laser optics. The core challenge addressed was the mismatch between the standardized 28V DC power bus used in military systems and the significantly higher voltage requirements of piezoelectric actuators. Existing commercial drivers were evaluated and found unsuitable for field deployment due to inadequate ruggedness, excessive complexity, or power limitations. Consequently, a modular system architecture was designed featuring four independent driver channels, each using a high-voltage, high-current linear amplifier topology to scale …

Test Equipment Automation And Remote Operation Curriculum Senior Project, Raheel Rehmatullah

Electrical Engineering

The goal of this project is to create new lab procedures and lab bench permutations for Cal Poly EE students to implement automated Test and Measurement equipment into their electrical engineering education. Currently EE students at Cal Poly have no classroom based opportunities to learn about leveraging software skills and test equipment knowledge in order to automate measurements, which is a valuable skill for an electrical engineer in the workforce. The curriculum outlined in this project will include three experiments, each leveraging an instrument controller, and Python as the primary scripting language. Each procedure will require students to write Python …

Project Owl: Quad Rc2, Ethan Cy Zane

Electrical Engineering

Quad RC2 is a new radio designed to be compatible with the Cluster Duck Protocol (CDP). It must be able to act as all parts of the mesh network and be able to find its location with GPS. Much of the RC2 effort is already completed. This project ports the previously developed firmware to the new board and runs tests to assess its capabilities.

Advanced Light Dimming Power Converter, Jaden Nguyen, Edwin Lin, Alan Thai

Electrical Engineering

This senior project discusses and follows the development of the Advanced Light Dimming Power Converter meant to modernize the power electronics curriculum and improve student safety for a lab. The power converter attempts to replace the original experiment which includes a traditional TRIAC-based dimmer and focuses on demonstrating phase angle control for incandescent light bulbs. However, several drawbacks including high-voltage exposure and outdated technology warranted a revamp. The redesigned module includes a dual-experiment setup with an updated TRIAC-based dimmer circuit and a new AC-DC LED driver circuit with constant current control and PWM dimming capability. Both systems have been fabricated …

Compact Modular Photovoltaic System With Mppt Controller, Alain Ardash Kanadjian, Alex Aarnio, Christopher Arango

Electrical Engineering

Energy demands have been on the rise, as environmentally harmful power generation systems stay popular due to lower costs and compact designs compared to renewable energy infrastructure. We challenge this problem with a modular photovoltaic microgrid system for power generation in underutilized spaces. The Maximum Power Point Tracking (MPPT) charge controller employed is low-cost and power efficient. This controller monitors energy generation and usage in real time, with data logging through an online user-friendly interface. With support for a variety of solar panel and battery configurations, this scalable system helps provide a cost and space efficient solution to clean energy …

Ev Microgrid Inspired Open-Source Power Inverter, Bryan A. Carrillo Martinez

Master's Theses

The development of open-source power electronics platforms plays an instrumental role in accelerating microgrid deployment, electric vehicle (EV) integration, and educational access to embedded power electronic converters. This thesis presents the design, implementation, and validation of the Atinverter V2, an open-source DC to AC inverter intended for low power EV microgrid applications and educational settings. The Atinverter V2 integrates various hardware and software subsystems centered around the ATMEGA328P microcontroller, enabling PWM-based sinusoidal power inversion, DC/AC voltage and current sensing, and embedded control features. Software development leverages a C++ object-oriented library and multiple Arduino-based modules to facilitate modular and scalable operation. …

Design Of A Novel Low-Cost Hybrid V-Shape Spoke-Type Ferrite Ipm-Synrm For Ev Traction Using Fem Software, Kenghao Cai

Master's Theses

This paper presents a hybrid V-shape spoke type ferrite Interior Permanent Magnet Synchronous Reluctance Machine (PMA-SynRM) for electric vehicle traction application. Ferrite or ceramic IPM-SynRMs compared to Neodymium (NdFeB) based IPM-SynRMs typically have lower torque, power density, and efficiency overall. Motivated by rising costs and international policies making it increasingly more challenging to obtain rare-earth metals, alternatives should be explored. With the help of finite element method (FEM) software, Ansys Maxwell, this study probes into a novel three-phase ferrite-only hybrid Spoke-type V-shaped IPM-SynRM using Tesla Model 3's neodymium powered V-shape interior permanent magnet machine as a benchmark. The proposed motor …

Performance Of Neural Networks On Fpga For Embedded Devices Using Hls4ml Framework, Alam N. Romo Lopez

Master's Theses

As machine learning models such as neural networks are investigated for their applications across many fields, the demand for models that can be implemented on an embedded device grows. Field Programmable Gate Arrays (FPGAs) have become an attractive option for implementing these models in hardware. This thesis considers the viability of FPGA implementations for machine learning on low-resourced embedded systems. The hls4ml project is a promising prospect for machine learning on FPGA devices. To test hls4ml, we used a model trained on the MNIST digits dataset, which was then synthesized for the PYNQ-Z2 device. We fine tuned the performance by …

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Open-Source Cubesat Flight Board, Braydon M. Burkhardt

Electrical Engineering

The Helmsman Flight Board is an open-source main flight computer and electrical power system for educational and entry-level CubeSats. The board incorporates commercial off-the-shelf (COTS) components in conjunction with simplified monitoring and management circuitry, supporting easy adoption, modifiability, and affordability while crucially enabling the emerging aerospace industry’s rapid ‘design-build-test’ methodology in student satellite teams. Its design includes essential CubeSat subsystems such as battery management, command and data handling, attitude determination, on-board processing, and is built to support real-time embedded operating systems. Key features include an Arm Cortex-M7 based STM32, radiation-resistant memory for OS storage, bulk Flash memory, real-time clock, two …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Measurement Automation & Measurement System Research Endowment, Brian Bivinetto, Beneda Loya, Shiron Bendrihem

College of Engineering Summer Undergraduate Research Program

Road travel safety is always the most important issue in transportation systems. In general, several factors cause road accidents, such as human error, vehicle mechanical failure, roadway limitations (e.g. pavement, lane geometry, etc.), and inclement weather conditions. The major focus of today’s transportation developments is related to making highway transportation safer, smarter, and greener to enhance livability. Many accidents are caused when drivers lack a better understanding of the surrounding traffic conditions because the driver not only needs to control his/her vehicle but also needs to be aware of the movements of the vehicles around him/her. A driver cannot be …

Sal-E: Responsive Space Pathfinder Mission, Liam Duckworth, Berfredd Quezon

College of Engineering Summer Undergraduate Research Program

The main objective of the SAL-E mission is to grow the Cal Poly CubeSat Lab’s (PolySat) capabilities in rapid spacecraft design, as well as to provide the current generation of students with the opportunity to design, test, integrate, and communicate with a satellite. This summer we will be focusing on a few aspects of the spacecraft design and preparing our test facilities for Fall. Specifically, we will be ordering electronics boards that were designed in Spring, testing the boards as they arrive, developing software to interface with the payloads, begin integrated testing, updating the control system in our thermal vacuum …

Dual Base Sige Is-Hbt For Use In Biosensing Applications, Liam Stephen Hayes

Master's Theses

The proposed research is for a novel SiGe-based Ion-Sensitive Dual Hetero-junction Bipolar Transistor (IS-HBT) to be used in both trans-dermal biological sensing as well as Lab-on-Chip (LOC) applications. The end goals for the device designed are two: For one, the research done for this work will be used to substantiate the claims made by Zafar et al. [1] that an HBT-style structure is better suited for biosensing application rather than a conventional Field Effect Transistor (FET) based geometries. Secondly, it provides the final element to be integrated along with a selectivity membrane, as well as with a reverse-iontophoresis system to …

Design And Implementation Of An Inverted Short Baseline Acoustic Positioning System, Jakob Frabosilio

Master's Theses

This document details the design, implementation, testing, and analysis of an inverted short baseline acoustic positioning system. The system presented here is an above-water, air-based prototype for an underwater acoustic positioning system; it is designed to determine the position of remotely-operated underwater vehicles (ROVs) and autonomous underwater vehicles (AUVs) in the global frame using a method that does not drift over time.

A ground-truth positioning system is constructed using a stacked hexapod platform actuator, which mimics the motion of an AUV and provides the true position of an ultrasonic microphone array. An ultrasonic transmitter sends a pulse of sound towards …

Power Controller For Insulated Solar Electric Cooker, Ryan Koshy, Justin Tae-Hoon Kim

Electrical Engineering

Insulated Solar Electric Cookers, or ISECookers, are devices created to aid those in impoverished regions improve safety, sustainability, and quality of life regarding their cooking practices. ISECookers present an alternative to traditional biofuel/biomass energy sources and provide a closed-loop, self-sustaining system that can be used in a variety of environments. These devices present solutions to widespread issues such as pollution, deforestation, and hazardous emissions as a result of traditional cooking in developing regions around the world. A notable obstacle of these devices is power delivery. Given the varying conditions experienced by a solar panel (inclement weather, irradiance irregularities, etc.), it …

An Analysis Of Indoor Air Quality At Cal Poly For Sensor Design, Isabella M. Santi

Master's Theses

Prior research has shown that indoor air quality (IAQ) impacts cognitive performance. At Cal Poly, many older buildings are unable to maintain appropriate IAQ because of their outdated ventilation systems and the increasing number of students in the rooms. This work analyzes the IAQ of different buildings at Cal Poly, with a focus on Building 20. Carbon dioxide, temperature, and relative humidity inside classrooms are collected using an integrated circuit sensor and a microcontroller. A total of 38 hours of data was collected, with 22 of those hours in Building 20 specifically. We find that unlike temperature and relative humidity, …

A Hybrid Computer To Solve The Selective Harmonic Minimization Problem In Single-Phase Inverters, Dillon Nguyen

Master's Theses

Power electronics possess forms of non-ideality due to the nonlinearity present in physical switches. These switches are driven with pulse width modulation (PWM), which properly down-converts or up-converts based on converter topology. When these switches turn on or off, they introduce the main proponent of efficiency loss: harmonics. This becomes a nonlinear optimization problem with many converters. The solution proposed in this thesis is an analog/digital hybrid computer that utilizes the speed of analog computation and the accuracy of digital computing together. A Plexim RT Box provides the programmability needed for algorithms, while the analog circuit provides low-power, high-speed computation …

Smart Cushion Device For Elderly Aging In Place, Anna Dion, Nate Colley, Leonardo Bravo

Biomedical Engineering

Our task at hand is to develop a consumer-focused solution for improving elder care to provide additional peace of mind for seniors and caregivers using technology to extend independent living. We intend to create a device that will improve the quality of life of elderly individuals living alone by encouraging periodical movement throughout the day, along with monitoring pressure distribution and alerting when pressure concentration is potentially harmful. It will also alert users to the presence of moisture which can arise from spills or incontinence. The key stakeholders of this project include elderly adults over the age of 65 who …

Motor Controller Board For Cubesat Reaction Wheels, Tanner Ehlers

Electrical Engineering

Reaction wheels are crucial for CubeSats, providing precise attitude control and stability in the environment of space, enabling successful mission execution. The ‘Reaction Wheels’ project in the Cal Poly CubeSat Lab is in need of a new motor controller board due to the current board’s malfunction and inefficiencies in terms of size, complexity, power usage, and cost. Previously, other students have completed work on the mechanical design of the system, but little work has been done for the electrical components. The goal of this project is to design and test a new motor controller board that is compact, lightweight, power …

Echoes Of Nature: Using Biodata Sonification To Model Electrical Communication In Plants, Penelope Anna Alioshin

Electrical Engineering

The use of biodata sonification as a tool to visualize biological data is a response to recent developments in the intersection of art and technology. This project explores the intersection by converting the electrical impulses given off by plants into audio signals. By processing and amplifying the voltage difference between two electrodes on a plant, its communication is quantified. The goal is to use this communication model as a tool to increase ecological awareness as well as improve machine learning models. A deeper understanding of non-human communication systems, specifically those that employ superposition decision matrices, could help to drastically increase …

Design Of High Efficiency Doherty Power Amplifier, Kobi G. Kelly, Severin Pindell

Electrical Engineering

The project includes design and fabrication of a high efficiency power amplifier for a student design competition held at International Microwave Symposium (IMS) 2023. Efficient power amplifiers are critical for base station communication requiring efficient use of available power. The final design optimizes power added efficiency (PAE) and linearity. The amplifier will operate at 2.45 GHz. Competitive PAE above 50%, and C/I above 30 dB is achieved by leveraging a Doherty class amplifier using accurate discrete CGH4006P transistor models to simulate an efficient and linear design. Unique design features include optimal transistor bias point selection and power split ratios between …

Formula Sae Vehicle Dynamics Controller, Luke Edward Bosworth

Electrical Engineering

Throughout the history of motorsports, engineers have continuously pushed the boundaries of speed and control in the pursuit of enhancing vehicle performance on the track. Today’s top performing motor-vehicles leverage electric motors to the deliver instantaneous torque to the vehicle’s tires. While these electric motors can deliver a lot of power very efficiently, the delivery must be well controlled to get the most performance out of the tires. The Formula SAE Vehicle Dynamics Controller (VDC) senior project integrates vehicle modeling, state estimation, and yaw moment controls into a small- scale Formula-one style electric vehicle, improving vehicle performance and laying the …

2024 Marine Energy Collegiate Competition, Nora Riedinger, Miles Mikkelsen, Brendan Stratford, Derek Tom, Zach Kwast, Harmon Yanikian-Sutton, Kennedy Urcelay, Tori Thomas, Brady Caron

Mechanical Engineering

PolyWave Energy is the second team from California Polytechnic University at San Luis Obispo to compete in the Marine Energy Collegiate Competition. PolyWave Energy consists of Mechanical Engineering, Electrical Engineering, and Business Administration students who have worked together from September 2023 to May 2024 on designing, building, and testing a marine power device to serve a selected market.

In response to the escalating concerns surrounding carbon emissions, climate change, and the depletion of fossil fuels, California Polytechnic State University’s Polywave Energy team has developed a sustainable and reliable energy source for Autonomous Underwater Vehicle (AUV) charging. Through extensive research of …