Electrical and Electronics Commons^™

The Bicycle-Powered Smartphone Charger, Chris Arntzen

Master's Theses

This thesis entails the design and fabrication of a smartphone charger that is powered by a bicycle dynamo hub. In addition to the design and validation of the charger prototype, this thesis involves the testing and characterization of the dynamo hub power source, the design and construction of specialized test equipment, and the design and prototyping of a handlebar-mounted case for the smartphone and charging electronics. With the intention of making the device a commercial product, price, aesthetics, and marketability are of importance to the design. An appropriate description of the charger circuit is a microcontroller-based energy management system, tailored …

Smart Wall Plug Design For The Dc House Project, Edward Constant Sibal

Master's Theses

The DC House project at Cal Poly State University faces a challenge of supplying DC voltage to household appliances. Each appliance in the DC House constitutes a DC load that has a unique voltage and power rating, hence the need to develop a smart DC wall plug that will automatically adjust to the operating voltage required by any DC load. This thesis entails a proof of concept design of the smart DC wall plug which can automatically detect an appliance’s voltage rating. The design employs a dc-dc converter in conjunction with a microcontroller to sense load current to properly adjust …

Design And Analysis Of An Adaptive Asynchronous System Architecture For Energy Efficiency, Brent Michael Hollosi

Graduate Theses and Dissertations

Power has become a critical design parameter for digital CMOS integrated circuits. With performance still garnering much concern, a central idea has emerged: minimizing power consumption while maintaining performance. The use of dynamic voltage scaling (DVS) with parallelism has shown to be an effective way of saving power while maintaining performance. However, the potency of DVS and parallelism in traditional, clocked synchronous systems is limited because of the strict timing requirements such systems must comply with. Delay-insensitive (DI) asynchronous systems have the potential to benefit more from these techniques due to their flexible timing requirements and high modularity. This dissertation …

Study Of Current Optocoupler Techniques And Applications For Isolation Of Sensing And Control Signals In Dc-Dc Converters, Jake Williams

Graduate Theses and Dissertations

There is a need for power switches that can operate at high voltage, high temperature, and high switching frequencies with low losses. Power switches fabricated from wide bandgap materials such as silicon carbide (SiC) or gallium nitride (GaN) can outperform conventional silicon switches due to material property advantages. Another common problem in grid-connected applications is the need for high voltage-isolation of gate drivers and control circuitry while operating efficiently at the high switching frequencies, high power density, and high temperatures made possible by wide bandgap devices. Transformers cannot operate at the temperatures of these wide bandgap devices and a new …

Ultra-Low Voltage Digital Circuits And Extreme Temperature Electronics Design, Aaron J. Arthurs

Graduate Theses and Dissertations

Certain applications require digital electronics to operate under extreme conditions e.g., large swings in ambient temperature, very low supply voltage, high radiation. Such applications include sensor networks, wearable electronics, unmanned aerial vehicles, spacecraft, and energyharvesting systems. This dissertation splits into two projects that study digital electronics supplied by ultra-low voltages and build an electronic system for extreme temperatures. The first project introduces techniques that improve circuit reliability at deep subthreshold voltages as well as determine the minimum required supply voltage. These techniques address digital electronic design at several levels: the physical process, gate design, and system architecture. This dissertation analyzes …

Delay Insensitive Ternary Logic Utilizing Cmos And Cntfet, Ravi Sankar Parameswaran Nair

Graduate Theses and Dissertations

As digital circuit design continues to evolve due to progress of semiconductor processes well into the sub 100nm range, clocked architectures face limitations in a number of cases where clockless asynchronous architectures require substantially less power, generate less noise, and produce less electromagnetic interference (EMI). This dissertation develops the Delay Insensitive Ternary Logic (DITL) asynchronous design paradigm that combines the designs aspects of similar Dual-Rail asynchronous paradigms and Boolean logic to create a single wire per bit, three voltage signaling and logic scheme.

DITL is designed at the transistor level using multi-threshold CMOS and carbon nanotube (CNT) FETs to develop …

Low Power Sigma Delta Converter, Noel P. Martinez, Praveen K. Palakurthi, Eric Macdonald

COURI Symposium Abstracts, Summer 2012

Sub threshold technology allows for circuits to run at their best efficiency with the lowest amount of energy possible. The aim of this research was to combine this technology along with radiation hardness, or the ability for circuits to resist radiation without getting corrupted data. A chip that can convert digital data into analog data (DAC) was created and programmed using verilog, a Hardware Description Language (HDL). With verilog, we created digital data that would eventually be fed into the chip using a field-programmable gate array (FPGA) board. We tested our digital data using a test bench on the computer …

Foce Intermodule Communications System, Roland Quiros

Electrical Engineering

Done in conjunction with Chad Kecy of the Monterey Bay Aquarium Reasearch Institute (MBARI), this project is an expansion of the Free Ocean Carbon Emission (FOCE) project. This iteration created a communications protocol between the different modules in an expandable array of PIC24-based boards.

Lyfi, Kianoosh Salami, Justin Cotton, Elush Shirazpour

Electrical Engineering

This paper will cover the steps necessary to design, build, and manage networkable smart light switches over WiFi via a mobile application. It contains a microcontroller running a real time operating system, a WiFi module, a Java server with SQLite databasing, and a mobile phone application.

LyFi is designed to turn on/off and dim household lights while only requiring the same installation procedure as a less capable dimmer switch. Once installed and connected to a network, LyFi will self-discover and configure. The server automatically propogates a database of nodes where any mobile device running an application can receive an updated …

Linear Power-Efficient Rf Amplifier With Partial Positive Feedback, Matthew E. King

Master's Theses

Over the last decade, the number of mobile wireless devices on the market has increased substantially. New “multi-carrier” modulation schemes, such as OFDM, WCDMA, and WiMAX, have been developed to accommodate the increasing number of wireless subscribers and the demand for faster data rates within the limited commercial frequency spectrum. These complex modulation schemes create signals with high peak-to-average power ratios (PAPR), exhibiting rapid changes in the signal magnitude. To accommodate these high-PAPR signals, RF power amplifiers in mobile devices must operate under backed-off gain conditions, resulting in poor power efficiency. Various efficiency-enhancement solutions have been realized for backed-off devices …

An Rf Cmos Implementation Of An Adaptive Filter For Narrow-Band Interferer Suppression In Uwb Systems, Markus Both

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Ultra-wideband (UWB) technology is a new type of technology for wireless communication that is based on the transmission of low power sub-nanosecond pulses. UWB communication utilizes a large bandwidth that overlaps and is coexistent with other wireless communication standards that can be also considered as narrow-band interferers. Because UWB systems are highly susceptible to narrow-band interferers, there is a demand for interferer suppression. An adaptive filter consisting of a two-element diversity receiver that performs minimum mean square error combining (MMSE) by the LMS algorithm is proposed. Thereby the elements of the LMS algorithm as well as the receiver LNA were …

Auto-Tuning Antenna, John Chen, Jennifer Tighe

Electrical Engineering

Radio transmitters and antennas have differing impedances at the output and feedpoint, depending on frequency. Modern antenna tuning methods involve manual or automatic resistance and reactance network adjustment to match transmitter and antenna impedance. This reduces power reflections to the transmitter, but introduces losses and prevents full transmitter power from being radiated at the antenna. This project utilizes a variable length antenna element to tune and match transmitter and antenna impedances, allowing efficient power transfer to the antenna. The antenna length varies from 0 to 30.5 inches. The method involves an RF signal with a maximum power of 2 watts …

A 2-D Processor Array For Massively Parallel Image Processing, Anantha Krishna Nelliparthi

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The concept of introducing image processing logic within the spatial gaps of an array of photodiodes is the key factor behind the presented work. A two-dimensional massively parallel image processing paradigm based on 8X8 pixel neighborhood digital processors has been designed. A low complexity processor array architecture along with its instruction set has been designed and fully verified on a FPGA platform. Various image processing tests have been run on the FPGA platform to demonstrate the functionality of a design that uses 12 parallel processors. The test results indicate that the architecture is scalable to support high frame rates while …

Wireless Embedded Smart Cameras: Performance Analysis And Their Application To Fall Detection For Eldercare., Alvaro Pinto

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Wireless Embedded Smart Camera Networks has received a lot of attention from academia and industry because they are small in size and easy to deploy, and they offer a multitude of attractive applications. They can be used for embedded single unit applications, or can be networked for multi-camera applications.

We first analyze three different operation scenarios for a wireless vision sensor network wherein different levels of local processing is performed. A detailed quantitative comparison of three operation scenarios are presented in terms of energy consumption and latency. This quantitative analysis provides the motivation for performing high-level local processing and decision …

Laser Cursor, Michael Liman

Electrical Engineering

A user controls a cursor on a computer screen using a laser pointer.  A camera picks up the laser pointer’s position and sends the data to the computer to move the cursor in the correct position.

Project 308: Augmented Reality Mario Kart, Joseph Abad, David Allender, Joryl Calizo, Ryan Gaspar, Gavin Lee

Computer Engineering

Mario Kart is a popular go-kart racing game developed by Nintendo. The premise of the game is simple: drive a go-kart along a racetrack and reach the finish line before the other players. What makes this game unique, however, is the inclusion of weapons, traps, and other projectiles that a player can use to gain an advantage in the race. We have taken on the challenge of not only recreating this amazing game, but using the art of Augmented Reality to fully immerse the player in the full experience. Rather than play the game on a television screen with a …

Discrete Alarm Clock, Travis Moore, Collin Barth

Electrical Engineering

The standard alarm clock, as used daily by millions worldwide, has clear room for modification and improvement.  This paper documents an implementation that rectifies many of these flaws.  Improvements include adjustable snooze length, an IR remote for ease of use, and an RF headset for discrete alarm use or potential incorporation into a device much like a hearing aid.  The processes involved in creating a digital alarm clock, as well as the obstacles met in the implementation of the enhanced design, are detailed within.

A Single-Chip Ultra-Wideband Based Wireless Sensor Network Node, Nathan R. Schemm

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents the design of a next-generation wireless sensor network node. The node incorporates many new and innovative technologies such as an ultra-wideband radio which allows very low-energy communication, a low-power radiation detection front end, and an efficient implementation of dynamic voltage scaling which improves the energy efficiency of the integrated processor. The complete design is integrated on a single chip for maximum power savings and minimal size.

The ultra-wideband transceiver includes many novel techniques to produce a receiver with low power consumption and fast and accurate packet acquisition and reception. These include the use of a standard symmetric …

Asynchronous Mips Processors: Educational Simulations, Robert L. Webb

Master's Theses

The system clock has been omnipresent in most mainstream chip designs. While simplifying many design problems the clock has caused the problems of clock skew, high power consumption, electromagnetic interference, and worst-case performance. In recent years, as the timing constraints of synchronous designs have been squeezed ever tighter, the efficiencies of asynchronous designs have become more attractive. By removing the clock, these issues can be mitigated. How- ever, asynchronous designs are generally more complex and difficult to debug. In this paper I discuss the advantages of asynchronous processors and the specifics of some asynchronous designs, outline the roadblocks to asynchronous …

Polyenvi, Stephen Beard, Josh Engel, Paul Fake, Diego Flores, Alvaro Nunez, Miguel Wong

Electrical Engineering

Poor indoor air quality is a problem that is recognized by the Environmental Protection Agency (EPA) to cause health issues. In order to raise awareness of this problem, this document outlines the construction of a device that economically measures air quality through five metrics: dust, smoke, ozone, humidity, and temperature. The device integrates with a router to provide users access to information about their indoor air quality anywhere over the internet as well as local access to the data via an LCD mounted on the router. By increasing indoor air quality awareness, this device will aid users in making adjustments …

High Contrast Grayscale Object Tracking Embedded System Design, Scott Donald Neally

Electrical Engineering

The purpose of this project is to prove that a real-time object-tracking camera can be implemented using the Digilent NEXYS board with Xilinx Platform Studio. With great ambition I set to implement the camera with RGB color tracking of bright green objects. This would make segmentation between the object of interest and its background much easier, allowing less stringent requirements on the background color beyond the object. Because of time restraints, the actual implementation remains as 8-bit grayscale, where the object of interest is intended to be white and highly contrasted from its black background. A simple algorithm is used …

Hand-Held Flyback Driven Coaxial Dielectric Barrier Discharge: Development And Characterization, Victor J. Law, Vladimir Milosavljevic, Neil O’Connor, James F. Lalor, Steven Daniels

Articles

The development of a handheld single and triple chamber atmospheric pressure coaxial dielectric barrier discharge driven by Flyback circuitry for helium and argon discharges is described. The Flyback uses external metal-oxide-semiconductor field-effect transistor power switching technology and the transformer operates in the continuous current mode to convert a continuous dc power of 10–33 W to generate a 1.2–1.6 kV 3.5 μs pulse. An argon discharge breakdown voltage of ∼768 V is measured. With a 50 kHz, pulse repetition rate and an argon flow rate of 0.5–10 argon slm (slm denotes standard liters per minute), the electrical power density deposited in …

Design For Signal Integrity In High Frequency, High Density Circuit Boards, Juan Manuel Talavera Martinez

Theses

The electronics market is continually seeking fast and small high performance products. The clock frequency in computer systems is often above 2GHz and new generations of laptops have considerably reduced in size. These features make printed circuit board (PCB) design more difficult than in the past.

This thesis is an investigation of the current design of high speed PCB. The complexity of this type of circuit makes the designer needs an extensive knowledge of the techniques used to generate a reliable signalling, in other words, signal integrity. To achieve this objective, the design community has to overcome several problem related …

Genetic Algorithms Vs. Simulated Annealing: A Comparison Of Approaches For Solving The Circuit Partitioning Problem, Theodore W. Manikas, James T. Cain

Computer Science and Engineering Research

An important stage in circuit design is placement, where components are assigned to physical locations on a chip. A popular contemporary approach for placement is the use of simulated annealing. While this approach has been shown to produce good placement solutions, recent work in genetic algorithms has produced promising results. The purpose of this study is to determine which approach will result in better placement solutions.

A simplified model of the placement problem, circuit partitioning, was tested on three circuits with both a genetic algorithm and a simulated annealing algorithm. When compared with simulated annealing, the genetic algorithm was found …

Circuit Analysis Of A Gas Flow Switch, Teri Marie Owens

Electrical & Computer Engineering Theses & Dissertations

The circuit analysis of a gas flow switch is presented. The objective of the analysis is to model the switching process during spark gap breakdown. This information is useful in understanding switch operation and identifying ways to improve switch performance.

A lumped circuit model is used to describe a gas flow switch during the switching process. Certain circuit element values are determined experimentally through static tests. Other component values, including a time-varying switch resistance and inductance, are estimated from current measurements. In particular, unknown constants in expressions for gap resistance and inductance are determined using an iterative parameter estimation technique. …