Electrical and Electronics Commons^™

Conversion Of Digital Circuits Labs, Caleb N. Taber

Undergraduate Honors Theses

The engineering technology department at ETSU currently lacks a modern method to teach digital circuits. The aim of this thesis is to convert our current digital circuits labs to equivalent labs suited to run on the Basys 3. The Basys has several advantages over the aging NI Elvis boards (and now just breadboards) currently in use. The first advantage is that the Basys gives students a taste of FPGA programming without being overwhelmingly; like the systems currently in place for the digital signal processing class. The Basys is also a more modern system; our current integrated circuit and breadboard system …

Design, Analysis, Implementation And Evaluation Of Real-Time Opportunistic Spectrum Access In Cloud-Based Cognitive Radio Networks, Nimish Sharma

College of Graduate Studies: Theses & Dissertations

Opportunistic spectrum access in cognitive radio network is proposed for remediation of spectrum under-utilization caused by exclusive licensing for service providers that are intermittently utilizing spectrum at any given geolocation and time. The unlicensed secondary users (SUs) rely on opportunistic spectrum access to maximize spectrum utilization by sensing/identifying the idle bands without causing harmful interference to licensed primary users (PUs). In this thesis, Real-time Opportunistic Spectrum Access in Cloud-based Cognitive Radio Networks (ROAR) architecture is presented where cloud computing is used for processing and storage of idle channels. Software-defined radios (SDRs) are used as SUs and PUs that identify, report, …

Pattern Recognition In Class Imbalanced Datasets, Nahian A. Siddique

Theses and Dissertations

Class imbalanced datasets constitute a significant portion of the machine learning problems of interest, where recog­nizing the ‘rare class’ is the primary objective for most applications. Traditional linear machine learning algorithms are often not effective in recognizing the rare class. In this research work, a specifically optimized feed-forward artificial neural network (ANN) is proposed and developed to train from moderate to highly imbalanced datasets.

The proposed methodology deals with the difficulty in classification task in multiple stages—by optimizing the training dataset, modifying kernel function to generate the gram matrix and optimizing the NN structure. First, the training dataset is extracted …

Scaled Synthetic Aperture Radar System Development, Ryan K. Green

Master's Theses

Synthetic Aperture Radar (SAR) systems generate two dimensional images of a target area using RF energy as opposed to light waves used by cameras. When cloud cover or other optical obstructions prevent camera imaging over a target area, SAR can be substituted to generate high resolution images. Linear frequency modulated signals are transmitted and received while a moving imaging platform traverses a target area to develop high resolution images through modern digital signal processing (DSP) techniques. The motivation for this joint thesis project is to design and construct a scaled SAR system to support Cal Poly radar projects. Objectives include …

Color Amplification, Jose Carrillo, Cynthia Barajas

Electrical Engineering

The goal of this project is to design and implement a hardware version of MIT’s and Cal Poly’s color amplification system. MIT created a software based system named the “Eulerian Video Magnification” that can reveal small variations that cannot be seen with the naked eye by processing the input sequence of the video. The process consists of using a Gaussian pyramid with a Gaussian kernel in order to do spatial decomposition. This process continues until there is one pixel left which then gets amplified and added back onto each pixel of the original frame for reconstruction. The reconstructed signal can …

Brain Machine Interface Using Emotiv Epoc To Control Robai Cyton Robotic Arm, Daniel P. Prince, Mark J. Edmonds, Andrew J. Sutter, Matthew Thomas Cusumano, Wenjie Lu, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

The initial framework for an electroencephalography (EEG) thought recognition software suite is developed, built, and tested. This suite is designed to recognize human thoughts and pair them to actions for controlling a robotic arm.

Raw EEG brain activity data is collected using an Emotiv EPOC headset. The EEG data is processed through linear discriminant analysis (LDA), where an intended action is identified. The EEG classification suite is being developed to increase the number of distinct actions that can be identified compared to the Emotiv recognition software. The EEG classifier was able to correctly distinguish between two separate physical movements.

Future …

Dual Channel Matrix Switch Audio Receiver, Austin Fox

Electrical Engineering

The Dual Channel Matrix Switch Audio Receiver controls 2 separate audio output channels. Each channel plays any of the system's 3 inputs. This controller enables a user to play two separate audio signals through two separate speaker channels. The system design allows audio input from 2 RCA sources or 1 RCA source and a phono source. The system outputs an audio signal for each output simultaneously at up to 36W on each channel for an 8Ω load. The device allows a user to control the audio input and the volume of each output channel. An Arduino Uno R3 microcontroller interfaced …

A Collaborative Adaptive Wiener Filter For Image Restoration Using A Spatial-Domain Multi-Patch Correlation Model, Khaled M. Mohamed, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

We present a new patch-based image restoration algorithm using an adaptive Wiener filter (AWF) with a novel spatial-domain multi-patch correlation model. The new filter structure is referred to as a collaborative adaptive Wiener filter (CAWF). The CAWF employs a finite size moving window. At each position, the current observation window represents the reference patch. We identify the most similar patches in the image within a given search window about the reference patch. A single-stage weighted sum of all of the pixels in the similar patches is used to estimate the center pixel in the reference patch. The weights are based …

Low-Power Analog Processing, Daniel J. White

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents the analog harmonic transform (AHT) and a first implementation in an integrated circuit. The transform is designed for a regular and simple hardware structure. It provides coefficients relating to an input signal's spectrum. These coefficients also have a simple relationship to the signal's Fouri\'er series coefficients.

The AHT is defined in its ideal form and evaluated for two example signal classification applications. Both military vehicle and bearing fault classification tasks are presented which validate the ability of a neural network to use the AHT coefficients to correctly classify the input signals. Because any real use of the …

A Prototype Microwave Cavity Control Circuit For Use In Next Generation Free Electron Laser, Josh Thompson, Peter Neal Barrina, Jiayi Jiang, Joe Frisch, Steve Smith, Daniel Van Winkle

STAR Program Research Presentations

One of the current programs at SLAC National Accelerator Laboratory is the Linac Coherent Light Source, or LCLS. Using the existing hardware of the last third of their linear accelerator (or “linac”), SLAC has created one of the most energetic X-ray free electron lasers (or “FEL”). Since 2009, LCLS has used this FEL to perform a wide range of experiments across all sciences, most notably ultrafast filming at the molecular scale. As requests for beam-time with this laser increases, SLAC is purposing a linac upgrade to better match this demand. This upgrade, named LCLS-II, will replace existing copper radio frequency …

Analysis Of Sensor Signals And Quantification Of Analytes Based On Estimation Theory, Karthick Sothivelr

Master's Theses (2009 -)

Compact sensor systems for on-site monitoring of groundwater for trace organic compounds are currently under development. To permit near real-time analysis of samples containing multiple analytes, the present work investigates a sensor signal processing approach based on estimation theory, specifically using Kalman Filter and Extended Kalman Filter. As a first step towards the analysis of groundwater samples containing multiple compounds, the approach presented in this work permits estimation of analyte concentration(s) in binary mixtures and single analyte samples on-line, before the sensor response reaches steady-state. Sensor signals from binary mixtures and single analyte samples of BTEX compounds (benzene, toluene, ethylbenzene, …

Variable Precision Tandem Analog-To-Digital Converter (Adc), Colton A. Parsons

Master's Theses

This paper describes an analog-to-digital signal converter which varies its precision as a function of input slew rate (maximum signal rate of change), in order to best follow the input in real time. It uses Flash and Successive Approximation (SAR) conversion techniques in sequence.

As part of the design, the concept of "total real-time optimization" is explored, where any delay at all is treated as an error (Error = Delay * Signal Slew Rate). This error metric is proposed for use in digital control systems. The ADC uses a 4-bit Flash converter in tandem with SAR logic that has variable …

Low Voltage Cmos Sar Adc Design, Ryan Hunt

Electrical Engineering

This project centers on the design of a single ended 10-bit successive approximation register analog to digital converter (SAR ADC for short) that easily interfaces to a micro-controller, such as an Arduino. With micro-controller interfacing in mind, the universal data transfer technique of SPI proved an easy way to communicate between the ADC and the micro-controller. The ADC has a range of 1V (highest code value) to 0V (lowest code value) and operates from a single voltage rail value of 1.8V. Typical SPI clock speeds run on the order of 2MHz and with a 10-bit ADC this means a sampling …

Real Time Swim Instructor, Konrad Antoniuk

Electrical Engineering

Both competitive and recreational swimmers want an efficient swim stroke but often lack consistent feedback with technical insight. Competitive swimmers rely on coaches for instruction but have to stop swimming to listen. The Real Time Swim Instructor project provides live feedback to a swimmer so they can feel their stroke correction while they’re swimming. The developing swimmer feels the difference between correct and incorrect form instantaneously.

The project takes on the responsibility of measuring the moving body, accurately determining stroke improvement, functioning under water, and providing recognizable feedback. Additionally, the user can review their swim from data stored in memory. …

Clear Circuit Contact Lens, Paul Hecker Ii, Phillip Azar, Alexander Do, Benny Ng, Errol Leon

Electrical Engineering

The clear active contact lens project aims to address safety and hazard awareness with an unexplored field of eye wear technology. With advancements in nanotechnology and the advent of circuits on contact lens, this project is one of the first research and development into this new field, following University of Washington and Google. The team focuses on the safety and biocompatibility of the contact lens for a comfortable ease of use. The designs push the limits of thin film printed technology with its pursuit of fine designs of 250μm antennas. The project streamlines the manufacturing process for a combination substrate …

Studies In Software-Defined Radio System Implementation, Harold A. Haldren Iii

Senior Honors Theses

Over the past decade, software-defined radios (SDRs) have an increasingly prevalent aspect of wireless communication systems. Different than traditional hardware radios which implement radio protocols using static electrical circuit, SDRs implement significant aspects of physical radio protocol using software programs running on a host processor. Because they use software to implement most of the radio functionality, SDRs are much more easily modified, edited, and upgraded than their hardware-defined counterparts. Consequently, researchers and developers have been developing previously hardware-defined radio systems within software. Thus, communication standards can be tested under different conditions or swapped out entirely by simply changing some code. …

Removing Parallax-Induced False Changes In Change Detection, Karmon M. Vongsy

Theses and Dissertations

Accurate change detection (CD) results in urban environments is of interest to a diverse set of applications including military surveillance, environmental monitoring, and urban development. This work presents a hyperspectral CD (HSCD) framework. The framework uncovers the need for HSCD methods that resolve false change caused by image parallax. A Generalized Likelihood Ratio Test (GLRT) statistic for HSCD is developed that accommodates unknown mis-registration between imagery described by a prior probability density function for the spatial mis-registration. The potential of the derived method to incorporate more complex signal proccessing functions is demonstrated by the incorporation of a parallax error mitigation …

The Garage Band Lightshow, Jason Descenzo

Electrical Engineering

The expenses musicians accrue make it hard to afford all the different equipment needed to perform and very unlikely that the average start up band or artist can afford the luxury of a musical light show in their early performances. The Garage Band Lightshow provides an easily set up and affordable way for musicians to use concert lighting in their performances. The Garage Band Lightshow provides one LED box. The light box responds to an audio signal and provides varying pulses and colors of light depending on the high, mid, and low frequencies of the audio signal. The Garage Band …

Machine-Human Cooperative Control Of Welding Process, Weijie Zhang

Theses and Dissertations--Electrical and Computer Engineering

An innovative auxiliary control system is developed to cooperate with an unskilled welder in a manual GTAW in order to obtain a consistent welding performance. In the proposed system, a novel mobile sensing system is developed to non-intrusively monitor a manual GTAW by measuring three-dimensional (3D) weld pool surface. Specifically, a miniature structured-light laser amounted on torch projects a dot matrix pattern on weld pool surface during the process; Reflected by the weld pool surface, the laser pattern is intercepted by and imaged on the helmet glass, and recorded by a compact camera on it. Deformed reflection pattern contains the …

Digital Control Board For Phased Array Antenna Beam Steering In Adaptive Communication Applications, Mayur Bansal

Master's Theses

The application of adaptive communication techniques for mobile communications has attracted considerable interest in the last decade. One example of these techniques is spatial filtering through planar antenna array beam forming.

This thesis describes the development of a digital system that adaptively controls a phased array antenna. The radiating structure of the phased antenna array is tetrahedral-shaped and contains four antenna elements on each of its three faces. The overall system comprises of a digital control board with an external computer interface, an RF control board, and the phased antenna array. The RF controls the main lobe direction on the …

Physiologically-Motivated Feature Extraction Methods For Speaker Recognition, Jianglin Wang

Dissertations (1934 -)

Speaker recognition has received a great deal of attention from the speech community, and significant gains in robustness and accuracy have been obtained over the past decade. However, the features used for identification are still primarily representations of overall spectral characteristics, and thus the models are primarily phonetic in nature, differentiating speakers based on overall pronunciation patterns. This creates difficulties in terms of the amount of enrollment data and complexity of the models required to cover the phonetic space, especially in tasks such as identification where enrollment and testing data may not have similar phonetic coverage. This dissertation introduces new …

Understanding Vehicular Traffic Behavior From Video: A Survey Of Unsupervised Approaches, Brendan Tran Morris, Mohan Manubhai Trivedi

Electrical & Computer Engineering Faculty Research

Recent emerging trends for automatic behavior analysis and understanding from infrastructure video are reviewed. Research has shifted from high-resolution estimation of vehicle state and instead, pushed machine learning approaches to extract meaningful patterns in aggregates in an unsupervised fashion. These patterns represent priors on observable motion, which can be utilized to describe a scene, answer behavior questions such as where is a vehicle going, how many vehicles are performing the same action, and to detect an abnormal event. The review focuses on two main methods for scene description, trajectory clustering and topic modeling. Example applications that utilize the behavioral modeling …

Multiplicative Feedback Audio Distortion Circuit, Colton Parsons

Electrical Engineering

This circuit aims to distort an audio signal input in a novel and aesthetically pleasing manner. When it comes to the timbre of a note, even harmonics generally sound better than odd harmonics. Most forms of audio signal distortion (usually for electric guitar) primarily add odd harmonics to a signal, as this is easily accomplished by clipping the waveform. This project instead utilizes a signal multiplier in a feedback loop, with one multiplier input coming from the circuit’s input, and the other from the multiplier’s own output. This process creates even harmonics. A delay line is placed in the loop, …

Tunable Fano Resonances Based On Two-Beam Interference In Microring Resonator, Ting Hu, Ping Yu, Chen Qui, Huiye Qui, Fan Wang, Mei Yang, Xiaoqing Jiang, Hui Yu, Jianyi Yang

Electrical & Computer Engineering Faculty Research

In this paper, a resonant system is demonstrated on silicon-on-insulator wafer to achieve tunable Fano resonances. In this system, the Fano resonance originates from the interference of two beams resonant in the microring resonator. The shapes of the Fano resonances are tunable through controlling the phase difference of the two beams. Both large slope and high extinctionratio (ER) are obtained when the phase difference is 0.5π or 1.5π. Experimental results show that Fano resonances with steep slope and ER over 20 dB are achieved in the whole free spectral range by controlling the microheaters to meet the phase condition.

Estimation Of Performance Indices For The Planning Of Sustainable Transportation Systems, Alexander Paz, Pankaj Maheshwari

Electrical & Computer Engineering Faculty Research

In the context of sustainable transportation systems, previous studies have either focused only on the transportation systemor have not used a methodology that enables the treatment of incomplete, vague, and qualitative information associated with the available data. This study proposes a system of systems (SOS) and a fuzzy logic modeling approach. The SOS includes the Transportation, Activity, and Environment systems. The fuzzy logic modeling approach enables the treatment of the vagueness associated with some of the relevant data. Performance Indices (PIs) are computed for each system using a number of performance measures. The PIs illustrate the aggregated performance of each …

Framework For Simulation Of Heterogeneous Mpsoc For Design Space Exploration, Bisrat Tafesse, Venkatesan Muthukumar

Electrical & Computer Engineering Faculty Research

Due to the ever-growing requirements in high performance data computation, multiprocessor systems have been proposed to solve the bottlenecks in uniprocessor systems. Developing efficient multiprocessor systems requires effective exploration of design choices like application scheduling, mapping, and architecture design. Also, fault tolerance in multiprocessors needs to be addressed. With the advent of nanometer-process technology for chip manufacturing, realization of multiprocessors on SoC (MpSoC) is an active field of research. Developing efficient low power, fault-tolerant task scheduling, and mapping techniques for MpSoCs require optimized algorithms that consider the various scenarios inherent in multiprocessor environments. Therefore there exists a need to develop …

Online Nonintrusive Condition Monitoring And Fault Detection For Wind Turbines, Xiang Gong

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The goal of this dissertation research is to develop online nonintrusive condition monitoring and fault detection methods for wind turbine generators (WTGs). The proposed methods use only the current measurements that have already been used by the control and protection systems of WTGs; no additional sensors or data acquisition devices are needed. Current-based condition monitoring and fault detection techniques have great economic benefits and the potential to be adopted by the wind energy industry. However, there are challenges in using current measurements for wind turbine condition monitoring and fault detection. First, it is a challenge to extract WTG fault signatures …

Energy Efficiency Analysis And Optimization On Mobile Video Wireless Delivery, Jianxin Sun

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Micro-electronic industry has been boosting the capability of wireless mobile devices on full-scale. However, battery, as the only power source of most mobile devices, is experiencing a relatively slow development. Therefore, how to optimally utilize the limited battery energy on mobile devices under a predefined performance requirement becomes a critical issue. On the other hand, it is still unclear that how the battery capacity consumption is allocated on different working pattern of a specific video codec under various tempo-spatial scales and parameters, which has posed a design challenge on power management on multimedia communication system. Furthermore, an optimization method is …

"Auto-Tuned" Stereo, Daniel Montes

Electrical Engineering

The purpose of this project is to determine the capability of introducing delay and gain to audio signals to synthesize a “tuned” experience. The project uses audio operational amplifiers, field effect transistors, a class D amplifier, microphones, speakers, a 32-bit microcontroller for design and testing. When implementing the MOSFET into the all pass filter, the phase delay occurs by varying the transistor resulted in minimal change in phase. MOSFETs are used as variable resistors to vary the phase change and gain. By modifying the gain the synthesized distance from each speaker can be adjusted. Varying the phase change provides the …

Digital Guitar Effects Unit And Amplifier, Kevin Salvador

Electrical Engineering

This report outlines the design and implementation of a digital guitar effects unit and amplifier. The main portion of this project consisted of the digital equalizer and effects. Several commercial equalizers were researched in order to decide the typical frequency bands and average amount of bands total. Eventually 8 bands were selected. A range of approximately 20Hz-3kHz was chosen based on test data of guitar signals. Popular effects that were incorporated in this project include Distortion, Echo, Reverb, Chorus and Flanger. The digital processor chosen was a Texas Instruments c6713 floating point processor. Designs for the various filters were done …