Controls and Control Theory Commons^™

Data-Driven Neuro-Fuzzy Modeling And Rule Optimization For Intelligent Prediction Of Bioreactor Dynamics, Kamala Najaf Mammadzada

Chemical Technology, Control and Management

Modeling wastewater bioreactors is a challenging problem in environmental engineering because the processes are constantly changing and the microorganisms do not behave in a linear or predictable way. This makes it difficult to predict and control the system behavior. This research investigates three artificial intelligence approaches for modeling wastewater bioreactors: the Mamdani Fuzzy Inference System (FIS), the Adaptive Neuro-Fuzzy Inference System (ANFIS), and clustering-based fuzzy models. These models help us predict what is happening in the bioreactors. For instance they help us predict how the amount of substances in the water is changing over time like dS₀/dt dSs/dt …

Regular Synthesis Algorithms Of Control Devices In Nonlinear Control Systems, Husan Zakirovich Igamberdiyev, Iskandar Yusupovich Abdurakhmanov, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

This paper examines the development of regularized algorithms for synthesizing control devices in control systems for polynomial objects, described by multidimensional Volterra functional series. The synthesis problem is solved using a two-stage procedure. In the first stage, the optimization problem is initially solved for an open-loop system. The second stage involves determining the parameters of the control device, i.e., its impulse response functions, by using the relationship between the characteristics of the open-loop and closed-loop systems. Regular algorithms are presented for finding the impulse response functions of the control device based on methods for regularizing the solution of operator equations …

Increasing The Prediction Accuracy Of Plant Oil Production Processes Through Adjusting The Parameters Of Machine Learning Models, Umidjon Ruziev, M.K. Shodiev, A.T. Rajabov

Chemical Technology, Control and Management

Vegetable oil production is characterized by high variability in output indicators due to nonlinear interactions between raw material parameters, equipment modes, and heat and mass transfer conditions. Existing approaches to applying machine learning in this field, as a rule, do not account for the impact of hyperparameter adjustments on forecasting quality across specific technological stages. The article presents a systematic methodology for adjusting model parameters (Ridge regression, SVR, GBM, LSTM) applied to three key tasks: predicting residual oil content in oil cake, color index during bleaching, and free fatty acid content during deodorization. In a set of 1000 observations, including …

Rdm Interval Arithmetic Based Weapon System Evaluation, Konul Imran Jabbarova Phd

Chemical Technology, Control and Management

For solving this issue, the paper considers a hierarchical multi-criteria decision-making problem, where the choice of a company that corresponds best to the criteria is required. Data used in this problem are presented in the form of intervals, which makes it possible to cope with uncertainty in the problem solution. Several companies working in missile production industry are chosen as alternatives for analysis. Evaluation of the selected alternatives is made based on five criteria clusters. More than twenty criteria are taken into account during evaluation.

Solving this problem is achieved with the help of the technique based on computation of …

Reliability Analysis Of Separator Control Systems, D.P. Muxitdinov, O.U. Sattarov, M.Sh. Nematov

Chemical Technology, Control and Management

This article aims to enhance the reliability, efficiency, and diagnostic capabilities of gas-liquid separators operating in hazardous technological processes. In the study, the separator is considered as a critical functional unit of an industrial system and is analyzed through structural and functional decomposition. The main operating parameters of the separator, including pressure drop (ΔP), separation efficiency and operational state are described on the basis of a mathematical model. In addition, a state model is developed for normal operation, foaming, liquid droplet carryover with the gas flow, and failure conditions. Emphasis is placed on diagnostic and monitoring issues, …

Analysis Of Automatic Control Of The Channels And Ditches Cleaning Mechanism Based On Dynamic Indicators, Nasiba Siraj Amirbayova

Chemical Technology, Control and Management

The article deals with the automated design and experimental investigation of reinforced concrete irrigation channels and ditches, their interrelated channel-cleaning mechanisms, which are complex mechatronic systems integrating hydraulic, mechanical, and electronic components. A thorough methodology is suggested, hydrodynamic modeling, combining parametric analysis, and information-based design support to enhance channel concrete cover thickness, geometry, and cleaning system performance. Main structural parameters—involving channel depth, slope, bottom width, and concrete cover—are systematically defined and shown in matrix form to facilitate automated calculation and decision-making. Experimental prototypes and Solid Edge-based digital models are employed to verify the methodology, revealing vital interdependencies between structural parameters, …

Structural Decomposition-Based Control Synthesis For Multivariable Systems Using Oblique Projection Operators, Abdukaxxarov Inomjon Ilxom Ugli Mr, Oripjon Olimovich Zaripov, Jasur Usmonovich Sevinov

Chemical Technology, Control and Management

This paper proposes a novel approach to control synthesis for multivariable systems with algebraic constraints using oblique projection operators and their structural decomposition. The method transforms a standard control law into a structured form by decomposing the control input into constraint-satisfying and null-space components. A generalized oblique projector is constructed using a dual matrix, ensuring flexibility in shaping system properties. Furthermore, a recursive decomposition algorithm is developed, allowing the global projector to be represented as a sum of local operators corresponding to subsystem structures. The proposed framework enables modular control design, decoupling of interactions, and efficient implementation for large-scale systems. …

Conceptual Model For Protecting Personal Data By Depersonalization In Information Systems: Principles, Components, And Life Cycle, Zarina Ildarovna Azizova

Chemical Technology, Control and Management

This article presents a systematic approach to personal data protection through depersonalization in the context of regulatory pressure and growing cyber threats. It proposes a comprehensive conceptual model that formalizes the de-identification process as a manageable sequence of steps, from attribute classification and method selection to mandatory verification of the result. The article also provides a comparative analysis of existing depersonalization methods in terms of their applicability within the proposed model. The model serves as a basis for the development of specific algorithms, as demonstrated by the example of a data shuffling approach.

The Pid-Based Three Quadcopter Uavs Formation Control Under External Disturbance, Vo Van An, Trinh Luong Mien

Makara Journal of Technology

This paper presents the design and evaluation of a formation control strategy for three quadcopter UAVs, based on a PID controller in a leader–follower structure, under the influence of external disturbances. Each UAV employs a six-degree of-freedom dynamic model and utilises a cascade PID control architecture, in which the inner control loop stabilises the attitude. In contrast, the outer control loop regulates position and maintains the formation. The PID parameters are tuned using the Ziegler–Nichols method to ensure simple implementation and low computational cost. The performance of the control system is evaluated through simulations in the MATLAB environment for two …

Piano Aid, Christopher G. Sayers, Tyler Baugus, Gabby Taunton

Create@State

Pianos provide recreational and educational value and is a cornerstone of the culture experienced worldwide today. Despite the many benefits and enrichment music brings these benefits are often inaccessible or difficult to learn by most people but especially to those of the Deaf and Hard of Hearing (DHH) community due to its innate auditory nature. While adaptive instruments have been proposed to address this gap, many remain conceptual or fail to reach production because of high development costs and limited commercial markets. This project presents an economically feasible alternative in the design of an adaptive digital piano that enables both …

Relationships Between The Parameters Of The Vegetable Oil Refining Process And Energy Consumption, Umidjon Abdimajitovich Ruziev, Marufjon Kobuljonovich Shodiev

Technical science and innovation

Vegetable oil refining is a multi-stage thermochemical process that is closely related to energy consumption, process parameters, product quality, and food safety requirements. Despite the extensive scientific literature on oil quality and pollutant formation, the quantitative relationship between purification parameters and relative energy consumption has not been sufficiently studied. In this work, a systematic analysis and engineering synthesis were carried out based on existing studies. According to the analysis results, the deodorization process accounts for 52–56% of the total thermal energy consumption, with a relative value ranging from 160 to 380 kJ/kg, depending on the enterprise's capacity and heat utilization …

Control And Stability Analysis Of Three-Phase Grid-Connected Inverters In Renewable Energy Systems, Yasser Ayeva

Electrical Engineering and Computer Science Faculty Publications and Presentations

The increase in demand for renewable energy sources such as solar and wind systems has led to widespread use and integration of a three-phase grid connected inverters in electric modern electric power systems. The inverters are essential to convert DC power into AC power and to control the delivered power to the grid. However, the use of the inverters in a renewable energy system has some challenges related to stability and control due to the presence of power electronic interfaces and filter dynamics. This paper analyzes the control and stability of three phase grid connected inverter through an LCL filter. …

Ultragps: A Low-Cost, Open-Source Ultrasonic Positioning System, Scott Roelker Murillo, Nnamdi Jesse Onwuzurike

Posters - 2026

We want to raise the bar in high school robotics. In Texas, and likely in many other states as well, high school robotics has reached a roadblock when it comes to autonomous navigation. In many competitions, the autonomous portion sees few, teams successfully completing tasks that require positioning and guidance. In modern robotics, it is no longer sufficient for a robot merely be “remote controlled.” They need to be able to navigate independently and adapt to the environment around them. To achieve this goal a positioning system is needed to develop the foundational algorithms for autonomous controls. However, these systems …

Insect Inspired Behavioral Strategies For Improving Multi-Agent System Resilience In The Presence Of Contagious Faults, James E. Hand

Doctoral Dissertations and Master's Theses

As Multi-Agent Systems (MASs) become increasingly involved in every aspect of everyday life the need to maintain reliability and resilience within these systems grows. However, in equal measure bad actors wishing to maliciously control or alter these systems are growing in both scale and capability. Thus, there is a present need for control schemes and agent behaviors that provide security against these threats while also avoiding large degradation in system performance as a tradeoff. Current research has covered a wide breadth of avenues and strategies that provide measurable resilience to faulted agents. However, these strategies often require group consensus, specialized …

Tuning And Performance Of Pid Controlled Low Complexity Systems, Timothy Evans

Honors Theses

Proportional integral derivative (PID) controllers are used for precise position and orientation control in systems such as autonomous underwater vehicles (AUVs). This project supports the University of Southern Mississippi’s (USM) Robotics Club’s RoboSub AUV effort by developing, troubleshooting, and manually tuning PID controllers to characterize tracking performance and settling time across systems of increasing complexity. Initially, the project hypothesized that tracking performance would be reduced and settling times would increase as system complexity advanced from one degree-of-freedom (DOF) to two DOF. However, prior research was found that suggests that for small disturbances around an equilibrium state, separate PID-controlled DOFs can …

Deep Learning Based Control System For Multi-Zone Hvac Residential Buildings, Mohammad H. Z. Alghalayeeni

Mechanical Engineering Theses

Heating, ventilation, and air conditioning (HVAC) systems are major contributors to residential energy consumption. However, most homes continue to rely on single zone thermostat control, which regulates temperature based on a single sensor and cannot account for thermal variations across multiple rooms. This often leads to uneven thermal conditions and inefficient energy use in multi-zone residential buildings. This thesis presents a deep reinforcement learning based approach for improving HVAC zoning control through dynamic airflow distribution. A physics based multi zone thermal model of a residential house was developed to simulate heat transfer processes including conduction, convection, solar and internal heat …

Identification Of Thruster Faults In Underwater Vehicles By Using Custom Encodings In Spiking Neural Networks, Donovan Gegg

LSU Master's Theses

Autonomous Underwater Vehicles (AUVs) are untethered robotic platforms used for tasks such as seafloor mapping, infrastructure inspection, and environmental monitoring. Recent technological advances have produced smaller, more affordable platforms, broadening access to research teams and small companies alike. This miniaturization comes at the cost of them handling drawbacks associated with a more compact machine such as reduced battery capacity as well as limited processing and sensing capabilities. These constraints make small-sized marine vehicle’s reliability critical as they can cause malfunctions, making the loss of a vehicle more likely. Actuator faults are particularly consequential as unintended and unstable control in an …

Research Of Logic Elements Based On Complementary Bipolar Transistors, Nodira Batirdjanovna Alimova, Nilufar Baxtiyorovna Gulyamova

Chemical Technology, Control and Management

Important parameters for any type of inverter – a NOT logic gate – are the power consumption during switching and the supply voltage. The proposed connection of complementary (two different types) bipolar transistors reduces the current consumption and supply voltage by simultaneously using the cutoff and saturation modes of the bipolar transistors. It has been theoretically and experimentally established that an inverter using complementary bipolar transistors operates at low supply voltages, approximately 0.7 V. Power consumption is virtually independent of the inverter's static state. A method for calculating the transfer characteristic of an inverter using complementary bipolar transistors is developed, …

Algorithms Of Stable Adaptive Observation Of A Multidimensional Undefinite Object, Tursunova Sadoqat Abdusalom Qizi

Chemical Technology, Control and Management

This article presents an algorithm for simultaneously estimating the parameters and state coordinates of a multidimensional control object when some of its state variables are not directly measured. The inability to measure all state variables (coordinates) of an object is a well-known drawback of identification schemes. Such conditions require the construction of adaptive state observers. This work demonstrates that when identifying the parameters of a mathematical model for an uncertain multidimensional object, the asymptotic stability of the object and the convergence of its parameters to the model parameters are ensured, provided the input vector is sufficiently informative. The construction of …

Analysis Of The Carbonization Process Of Ammoniated Brine In Ammonia-Soda Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fotima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The work provides an analytical review of the current state of modeling and controlling the carbonization process of ammoniated brine. It analyzes modern methods of mathematical, simulation, and intelligent modeling of heat and mass transfer, hydrodynamics, carbonation kinetics, and crystallization. The paper considers the potential of using digital twins, neural network models, fuzzy logic devices, and hybrid models to improve forecasting accuracy and the adaptability of process solutions. Modern carbonation process control strategies are also considered. A detailed analysis is provided of predictive control (MPC), neuro-fuzzy controllers, decentralized and multivariate control systems that ensure stable column operation under disturbances, optimize …

Analytical Method For Investigating Nonlinear Magnetic Circuits Of Measuring Transducers With A Standard Parameter Distribution Structure, Javhar Sulton O'G'Li Fayzullayev

Chemical Technology, Control and Management

The article proposes a new analytical method for investigating magnetic circuits with distributed parameters and nonlinear magnetic coupling. The method is based on introducing into the system of nonlinear differential equations of such circuits the condition that the second derivative of the magnetic flux with respect to the circuit length is equal to zero, as well as on assuming that one of the geometric parameters of the studied magnetic circuit – the value of the air gap between ferromagnetic cores, their thickness, width, or the linear value of the number of turns of the distributed excitation winding – is a …

Pid Control For Lower Limb Exoskeletons: A Framework Evaluation, Javlonbek Rakhmatillaev, Vytautas Bučinskas

Chemical Technology, Control and Management

This research provides a detailed guideline for implementing and evaluating Proportional Integral Derivative (PID) control frameworks in lower limb rehabilitation exoskeleton robotics. It examines the role of control systems within rehabilitation robotics, outlines the principles of PID control, describes exoskeleton architecture, explores applications of PID control, reviews optimization strategies, presents experimental validations, and considers future developments in the field. The proposed control framework incorporates aspects of mechanical design, actuator and sensor selection, and PID-based control algorithms, thereby promoting safe, accurate, and individualized rehabilitation support. Recommendations and effective guidance for future work are also presented.

Inductive Transducers For Measuring Vibrations, S.F. Amirov, A.Kh. Sulliev, A.A. Shoimkulov

Chemical Technology, Control and Management

A new design of an induction transducer has been developed for measuring linear and torsional vibrations in different directions with high sensitivity by constructing an inertial element consisting of four mutually perpendicular sectors and making the masses of two adjacent sectors different from the masses of the other two adjacent sectors. By constructing an inertial element in the form of a sector with two mutually diametric magnetic cores and different masses, and placing it between the horizontal and vertical axes, a design of an induction transducer has been developed that highly sensitively measures linear and torsional vibrations in different directions, …

The Main Errors Of The Ultrasonic Sensor In Measuring Water Flow In Open Channels, Anvar Urolovich Djalilov

Chemical Technology, Control and Management

This article analyzes the use of ultrasonic sensors in measuring water flow and the main errors that may occur in this process. In the conducted scientific research, a time-pulse ultrasonic sensor was tested. The absolute, relative and repeatability errors of the sensor during water flow measurement were studied. The absolute error represents the largest difference between the value recorded by the sensor and the real value, affecting the overall accuracy of the measurement system. This error can vary depending on environmental factors, the design and operating principles of the sensor. During the experiment, the performance of this sensor was …

Synthesis Of An Adaptive Synergistic Fuzzy Discrete Controller For Nonlinear Systems, Isamidin Xakimovich Sidikov, Gulruxsor Murot Qizi Nashvandova, Feruzakhon Botirxon Qizi Sodiqova

Chemical Technology, Control and Management

The paper considers the issues of synthesizing an adaptive fuzzy synergetic controller with discrete time for nonstationary nonlinear dynamic objects. The proposed approach is based on the integrated use of synergetic control principles and fuzzy logic methods, which ensure the formation of a control law for nonlinear dynamic objects that provides asymptotic stability of the control system. Such a hybrid combination makes it possible to guarantee the asymptotic stability of the closed-loop system and to shape the required dynamic behavior of the object over a wide range of operating modes. In addition, this approach provides the ability to adapt to …

Adaptive-Robust Control Of Dynamic Systems Using Generalized Predictive Methods, Shuxrat Tulyaganov

Chemical Technology, Control and Management

This paper considers an approach to adaptive-robust control of dynamic systems using generalized anticipation, where the object is described by a locally linearized model. Known self-tuning algorithms show insufficient stability to inaccurate selection of delay or model order. A generalized predictive control approach is suggested, with simulation outcomes showing superiority over traditional methods like generalized minimum variance control and pole assignment.This sliding horizon algorithm is based on predicting future system output signals several steps ahead, based on assumptions about subsequent control actions. One effective assumption is the presence of a “control horizon,” beyond which control signal increments are assumed to …

Review Of Modern Methods For Identification, Forecasting, And Intelligent Control Of Wastewater Biological Treatment Processes, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon O'G'Li Mannobjonov

Chemical Technology, Control and Management

This article presents a comprehensive review of contemporary approaches to the automation and intelligent control of wastewater biological treatment processes. Particular emphasis is placed on the digitalisation of wastewater treatment plants, ranging from the implementation of automated process control systems (APCS/SCADA-based solutions) to the application of predictive algorithms and the development of digital twins of bioreactors.

Special attention is devoted to mathematical models that underpin the control of bioprocesses. The evolution of the most widely used activated sludge models—ASM1, ASM2d, and ASM3—is examined, as these models describe key processes such as microbial community growth, nitrification, denitrification, and phosphorus removal. It …

Robotic Air Hockey Table, William Forcey, Andrew Piunno, Kaden Carpenter, Xander Zavatchen

Williams Honors College, Honors Research Projects

Air hockey, a popular arcade game, is traditionally designed for two players. This limits the game’s accessibility for individuals who wish to practice or enjoy it as a single player. To solve this problem, a robotic system was implemented to play air hockey against a human player. The speed and acceleration of the puck and mallet were measured from a game played between humans to inform the required movement capabilities of the robot. The robotic opponent implemented observes the location of the puck on the table using a camera and predicts where it will be in the future. A Cartesian …

Formalizing Asymmetric Control-Telemetry Separation In Distributed Industrial Control Systems, Andrew Manison

College of Graduate Studies: Theses & Dissertations

Distributed industrial control systems often place control and telemetry traffic on the same communication substrate even though the two workloads impose different requirements. Control paths need bounded request-response latency and predictable acknowledgement semantics, whereas telemetry paths benefit from scalable publish-subscribe fanout and tolerance for consumer-side delay. This thesis argues that, for the tested class of mixed workloads on shared commodity infrastructure, these communication roles should be separated architecturally rather than forced through a single protocol. To evaluate that claim, the thesis formalizes an asymmetric control- telemetry pattern and instantiates it in the Asymtra framework using gRPC for synchronous control and …

State-Dependent Queueing For Adaptive Signal Control: A Simulation-Based Performance Evaluation, Shaimaa Alseddiek, Usama Elrawy Shahdah, Hala B. Nafea, Hossam El-Din Moustafa, El-Said Ahmed Marzouk, Mohamed M. Ashour

Mansoura Engineering Journal

Urban traffic congestion persists as a critical challenge to transportation system efficiency, sustainability, and safety. Traditional queuing models utilizing fixed service rates inadequately represent the dynamic feedback between congestion and capacity in real vehicular flow. State-Dependent Queuing Models (SDQMs) address this limitation by modelling service rate as a function of queue length or density. This research advances SDQM application for adaptive traffic signal control through development of a calibrated state-dependent departure rate implemented within a microscopic simulation environment using SUMO and TraCI. Six control strategies including fixed-time, actuated, and two SDQM variants were evaluated across traffic demands ranging from undersaturated …