Controls and Control Theory Commons^™

Controllability And Observability Of The Discrete Fractional Linear State-Space Model, Duc M. Nguyen

Masters Theses & Specialist Projects

This thesis aims to investigate the controllability and observability of the discrete fractional linear time-invariant state-space model. First, we will establish key concepts and properties which are the tools necessary for our task. In the third chapter, we will discuss the discrete state-space model and set up the criteria for these two properties. Then, in the fourth chapter, we will attempt to apply these criteria to the discrete fractional model. The general flow of our objectives is as follows: we start with the first-order linear difference equation, move on to the discrete system, then the fractional difference equation, and finally …

Near-Optimal Control Of Switched Systems With Continuous-Time Dynamics Using Approximate Dynamic Programming, Tohid Sardarmehni

Mechanical Engineering Research Theses and Dissertations

Optimal control is a control method which provides inputs that minimize a performance index subject to state or input constraints [58]. The existing solutions for finding the exact optimal control solution such as Pontryagin’s minimum principle and dynamic programming suffer from curse of dimensionality in high order dynamical systems. One remedy for this problem is finding near optimal solution instead of the exact optimal solution to avoid curse of dimensionality [31]. A method for finding the approximate optimal solution is through Approximate Dynamic Programming (ADP) methods which are discussed in the subsequent chapters.

In this dissertation, optimal switching in switched …

Variable Speed Simulation For Accelerated Industrial Control System Cyber Training, Luke M. Bradford

Theses and Dissertations

It is important for industrial control system operators to receive quality training to defend against cyber attacks. Hands-on training exercises with real-world control systems allow operators to learn various defensive techniques and see the real-world impact of changes made to a control system. Cyber attacks and operator actions can have unforeseen effects that take a significant amount of time to manifest and potentially cause physical harm to the system, making high-fidelity training exercises time-consuming and costly. This thesis presents a method for accelerating training exercises by simulating and predicting the effects of a cyber event on a partially-simulated control system. …

Defender-Assisted Evasion And Pursuit Maneuvers, Roger S. Anderson

Theses and Dissertations

Motivated by the possibilities afforded by active target defense, a 3-agent pursuit-evasion differential game involving an Attacker/Pursuer, a Target/Evader, and a Defender is considered. The Defender strives to assist the Target by intercepting the Attacker before the latter reaches the Target. A barrier surface in a reduced state space separates the winning regions of the Attacker and Target-Defender team. In this thesis, attention focuses primarily on the Attacker's region of win where, under optimal Attacker play, the Defender cannot preclude the Attacker from capturing the Target. Both optimal and suboptimal strategies are investigated. This thesis uses several methods to breakdown …

Securing Critical Infrastructure: A Ransomware Study, Blaine M. Jeffries

Theses and Dissertations

This thesis reviews traditional ransomware attack trends in order to present a taxonomy for ransomware targeting industrial control systems. After reviewing a critical infrastructure ransomware attack methodology, a corresponding response and recovery plan is described. The plan emphasizes security through redundancy, specifically the incorporation of standby programmable logic controllers. This thesis goes on to describe a set of experiments conducted to test the viability of defending against a specialized ransomware attack with a redundant controller network. Results support that specific redundancy schemes are effective in recovering from a successful attack. Further experimentation is conducted to test the feasibility of industrial …

Estimation Of 3d Orientation From Inertial Sensors With Different/Nonuniform Sampling, Soulaimane Berkane

Western Research Forum

No abstract provided.

Development And Testing Of 3d Printed Prostheses, Orthoses, And Assistive Devices For Children And Adults, Walker Arce

UNO Student Research and Creative Activity Fair

User controllable interfaces for exoskeletons have consisted of either switch controlled interfaces, for ‘on’ or ‘off’, or elastic powered schemes that allow the user’s wrist flexion to provide the resistance for their therapy. This project aims to develop a hands-free mode of control for the exoskeleton, that uses more advanced electronic components to achieve a more natural user interface. Our approach to this project is the prototyping of a control system that uses the MyoBand Gesture Control Armband (MyoBand), and a simple Arduino based electronic design. The three modes of operation possible for this design is measuring the electrical signals …

From A Locally Competitive Algorithm To Sensory Relevance Models, Walter Woods

Electrical and Computer Engineering PhD Day

This poster addresses the development of a new Machine Learning (ML) mechanism, the Sensory Relevance Model (SRM), as a means of splitting information processing tasks into two sub-tasks with more intuitive properties. Specifically, SRMs are a front-end for other ML techniques, re-mapping the input data to a similar space with significantly more sparsity, achieved through the transformation and suppression of inputs irrelevant to the task. Prior work has attempted to reveal this information for Neural Networks (NNs) either as a post-processing step via saliency maps or through a simple masking of the input achieved with a dot product (so-called ``attention'' …

Coaxial Magnetic Gearbox With A Flux Concentration Halbach Rotor And Consequent Pole Rotor Typology, Ho Yin Wong

Electrical and Computer Engineering PhD Day

This paper presents the performance comparison between a flux concentration and triple permanent magnet consequent pole magnetic gear rotor typology with the same 7.5:1 gear ratio. The triple permanent magnet consequent pole magnetic gear is unique in that it can create torque change through two field heterodyning pole combinations. The performance with respect to volumetric and mass torque density is considered. It is shown that the flux concentration typology can operate with a higher mass and volumetric higher torque density, even when using a low flux concentration ratio rotor.

Drafting In Self-Timed Circuits, Christopher Cowan

Electrical and Computer Engineering PhD Day

Intervals between data items propagating in self-timed circuits are controlled by handshake signals rather than by a clock. The sequence of handshakes can be abstracted as the movement of “tokens”. In many self-timed designs, a trailing token will catch up with a leading token, even when it trails by thousands of gate delays. Simulations in SPICE of a simple GasP circular FIFO reveal this effect. Contrary to earlier work, we find the cause of drafting to be charge stored on an isolated node between two series transistors. This mechanism occurs in many decision gates that implement a logical AND. The …

Efficient Dynamic Centrality Metrics For Election Advertising - A Case Study, Soheil Eshghi, Leandros Tassiulas

Yale Day of Data

In prior work [1], we have shown how advertising channels should be chosen by a budget-constrained electoral campaign. In this poster, we apply the resulting proposed algorithm to the MIT Social Evolution [2] data-set (N=84), which captured political discussions, inclinations, and voting behaviors around the 2008 US Presidential Election within a student dorm. We compare the resulting centrality metrics developed from our algorithm (which have a direct mapping to optimal channel choice decisions) against more traditional static centralities, and show how employing them leads to more votes.

[1] Eshghi, S., Preciado, V.M., Sarkar, S., Venkatesh, S.S., Zhao, Q., D'Souza, R. …

Some Insights Into The Migration Of Double Imaginary Roots Under Small Deviation Of Two Parameters, Dina Alina Irofti, Keqin Gu, Islam Boussaada, Silviu-Iulian Niculescu

SIUE Faculty Research, Scholarship, and Creative Activity

This paper studies the migration of double imaginary roots of the systems’ characteristic equation when two parameters are subjected to small deviations. The proposed approach covers a wide range of models. Under the least degeneracy assumptions, we found that the local stability crossing curve has a cusp at the point that corresponds to the double root, and it divides the neighborhood of this point into an S-sector and a G-sector. When the parameters move into the G-sector, one of the roots moves to the right halfplane, and the other moves to the left half-plane. When the parameters move into the …

Communication Based Control For Dc Microgrids, Mahmoud S. Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Centralized communication-based control is one of the main methods that can be implemented to achieve autonomous advanced energy management capabilities in DC microgrids. However, its major limitation is the fact that communication bandwidth and computation resources are limited in practical applications. This can be often improved by avoiding redundant communications and complex computations. In this paper, an autonomous communication-based hybrid state/event driven control scheme is proposed. This control scheme is hierarchical and heuristic, such that on the primary control level, it encompasses state-driven local controllers, and on the secondary control level, an event-driven MG centralized controller (MGCC) is used. This …

Robust Distributed Stabilization Of Interconnected Multiagent Systems, Vahid Rezaei

Electronic Theses and Dissertations

Many large-scale systems can be modeled as groups of individual dynamics, e.g., multi-vehicle systems, as well as interconnected multiagent systems, power systems and biological networks as a few examples. Due to the high-dimension and complexity in configuration of these infrastructures, only a few internal variables of each agent might be measurable and the exact knowledge of the model might be unavailable for the control design purpose. The collective objectives may range from consensus to decoupling, stabilization, reference tracking, and global performance guarantees. Depending on the objectives, the designer may choose agent-level low-dimension or multiagent system-level high-dimension approaches to develop distributed …

A Transformative Process Control Solution, Simone Castanho Nobrega De Almedia Soares

ETD Archive

Knowing that a technology invented almost hundred years ago (PID controller) is still dominating industrial process control, a historical review was done to understand how the control field evolved. Model dependency and high level of mathematics appear as the main reasons that prevent other technologies from penetrating the engineering practice. A relatively novel methodology introduced by J. Han in 1998 called Active Disturbance Rejection Control (ADRC) came with characteristics that matches process control needs and restrictions on model dependency. This study will present a transformative solution for process control based on that. The control algorithm is designed and discretized for …

Robust Power Interface For Smart Grid With Renewable Energy Source-To-Grid Functionality, Bohyun Ahn

All Graduate Theses, Dissertations, and Other Capstone Projects

Many renewable energy companies design wind turbine generators, solar panels, or electrical car batteries with different specifications according to their management philosophy. And typical commercial power converters are not universally designed for all different types of renewable energy systems. Because of this lack of flexibility and interoperability, a universal and scalable smart grid power converter design is desirable. Designing a robust controlled bi-directional power converter is the motivation for this thesis as the first step to develop a more universal converter topology connecting renewable energy sources and the electrical smart-grid of the future.

Renewable energy such as wind or solar …

Strong Stability Of A Class Of Difference Equations Of Continuous Time And Structured Singular Value Problem, Qian Ma, Keqin Gu, Narges Choubedar

SIUE Faculty Research, Scholarship, and Creative Activity

This article studies the strong stability of scalar difference equations of continuous time in which the delays are sums of a number of independent parameters tau_i, i = 1, 2, . . . ,K. The characteristic quasipolynomial of such an equation is a multilinear function of exp(-tau_i s). It is known that the characteristic quasipolynomial of any difference equation set in the form of one-delayper- scalar-channel (ODPSC) model is also in such a multilinear form. However, it is shown in this article that some multilinear forms of quasipolynomials are not characteristic quasipolynomials of any ODPSC difference equation set. The equivalence …

Strong Stability Of A Class Of Difference Equations Of Continuous Time And Structured Singular Value Problem, Qian Ma, Keqin Gu, Narges Choubedar

SIUE Faculty Research, Scholarship, and Creative Activity

This article studies the strong stability of scalar difference equations of continuous time in which the delays are sums of a number of independent parameters τi, i = 1, 2, . . . , K. The characteristic quasipolynomial of such an equation is a multilinear function of e−τis. It is known that the characteristic quasipolynomial of any difference equation set in the form of one-delay-per-scalar-channel (ODPSC) model is also in such a multilinear form. However, it is shown in this article that some multilinear forms of quasipolynomials are not characteristic quasipolynomials of any ODPSC difference equation set. The equivalence between …

Some Aggregation Operators For Bipolar-Valued Hesitant Fuzzy Information, Florentin Smarandache, Tahir Mahmood, Kifayat Ullah, Qaisar Khan

Branch Mathematics and Statistics Faculty and Staff Publications

In this article we define some aggregation operators for bipolar-valued hesitant fuzzy sets. These operations include bipolar-valued hesitant fuzzy ordered weighted averaging (BPVHFOWA) operator, bipolar-valued hesitant fuzzy ordered weighted geometric (BPVHFOWG) operator and their generalized forms. We also define hybrid aggregation operators and their generalized forms and solved a decision-making problem on these operation.

Assessing The Spatial Accuracy And Precision Of Lidar For Remote Sensing In Agriculture, Surya Saket Dasika

Theses and Dissertations--Biosystems and Agricultural Engineering

The objective of this whole study was to evaluate a LiDAR sensor for high-resolution remote sensing in agriculture. A linear motion system was developed to precisely control the dynamics of LiDAR sensor in effort to remove uncertainty in the LiDAR position/velocity while under motion. A user control interface was developed to operate the system under different velocity profiles and log LiDAR data synchronous to the motion of the system. The LiDAR was then validated using multiple test targets with five different velocity profiles to determine the effect of sensor velocity and height above a target on measurement error. The results …

Contributions To Hybrid Power Systems Incorporating Renewables For Desalination Systems, Nasser Alawhali

Theses and Dissertations--Electrical and Computer Engineering

Renewable energy is one of the most reliable resource that can be used to generate the electricity. It is expected to be the most highly used resource for electricity generation in many countries in the world in the next few decades. Renewable energy resources can be used in several purposes. It can be used for electricity generation, water desalination and mining. Using renewable resources to desalinate the water has several advantages such as reduce the emission, save money and improve the public health. The research described in the thesis focuses on the analysis of using the renewable resources such as …

Discrete-Time Adaptive Control Algorithms For Rejection Of Sinusoidal Disturbances, Mohammadreza Kamaldar

Theses and Dissertations--Mechanical and Aerospace Engineering

We present new adaptive control algorithms that address the problem of rejecting sinusoids with known frequencies that act on an unknown asymptotically stable linear time-invariant system. To achieve asymptotic disturbance rejection, adaptive control algorithms of this dissertation rely on limited or no system model information. These algorithms are developed in discrete time, meaning that the control computations use sampled-data measurements. We demonstrate the effectiveness of algorithms via analysis, numerical simulations, and experimental testings. We also present extensions to these algorithms that address systems with decentralized control architecture and systems subject to disturbances with unknown frequencies.

Dynamic Output Feedback Invariants Of Full Relative Degree Nonlinear Siso Systems, W. Steven Gray, Luis A. Duffaut Espinosa

Electrical & Computer Engineering Faculty Publications

The goal of this paper is to explicitly describe invariants of a plant described by a Chen--Fliess series under a class of dynamic output feedback laws using earlier work by the authors on feedback transformation groups. The main result requires the rather strong assumption that the plant has a generating series with both finite Lie rank and full relative degree. In which case, there is no loss of generality in working with state space realizations of the plant. An additional genericness assumption regarding the normal form of the plant is also required, but as shown by the examples, this condition …

Electro-Mechanical-Thermal Modeling And Stability Of Pulsed Power Loads On A Dc Network, Joshua Allen Dillon

Dissertations, Master's Theses and Master's Reports

Modern military aircraft are developing larger pulsed power loads varying from new weapon technologies to advanced avionics and other electrical equipment. Pulsing power loads emulate a pulse width modulated signal which have non-linear destabilizing effects on the electrical system. Additionally, these devices have thermal properties that can induce electrical stability issues at low and high temperatures and various pulsing load conditions. These non-linear electrical stability issues carry through to the mechanical and thermal systems of the aircraft and can damage components. The MATLAB/Simulink workspace is used to simulate a non-linear model of an aircraft’s electrical-mechanicalthermal (EMT) system. This system includes …

A Novel Power Sharing Control Method For Distributed Generators In Dc Networks, Christina James

Electrical & Computer Engineering Theses & Dissertations

The power sharing control method is a desirable solution to integrate multiple renewable energy generators into the grid and to keep them working synchronously. Power sharing control between different distributed generators is an important consideration for the stabilized operation of the power grid network. In this thesis work, a novel method is used with the concept of droop control technique and is designed to control power from each individual generator in DC network particularly. The proposed power sharing control method can be widely applied to grid connected network and to islanded power grid network for obtaining high efficiency of power …

Ball Oscillating Bouncer, Eric Blok, Daniel Altemese, Ryan Nowacki, Maram Qurban

Williams Honors College, Honors Research Projects

The purpose of this report is to document the need, objectives, marketing and engineering requirements, as well as validate the design of an autonomous control device capable of continuously bouncing a table tennis ball on a paddle. This includes the design of a self correcting system using lightweight materials, and as few sensors and components as possible to achieve a compact, portable design. To accomplish this, the system is designed to react to a ball falling from as short a distance as 10 centimeters above the paddle, meaning all sensor processing, control processing, and motor drives should be able to …

Economic Operation Of Typical Microgrids, Yuanzhen Guo

Theses and Dissertations--Electrical and Computer Engineering

A microgrid is a subnetwork of power system that consists of a group of distributed energy sources and loads. It is designed to integrate distributed generation, loads, energy storage devices, converters, and monitoring and protection devices. Generally, a successful microgrid could run both in island mode (off-grid) and in grid-connected mode (on-grid), being able to convert between two modes at any time. With continuous development of the power system, distributed renewable generation unit accounts for an increasing proportion, since microgrid could effectively connect these generation units to the main grid, thereby improving the energy efficiency and the energy structure. Microgrid …

A Redundant Monitoring System For Human Welder Operation Using Imu And Vision Sensors, Rui Yu

Theses and Dissertations--Electrical and Computer Engineering

In manual control, the welding gun’s moving speed can significantly influence the welding results and critical welding operations usually require welders to concentrate consistently in order to react rapidly and accurately. However, human welders always have some habitual action which can have some subtle influence the welding process. It takes countless hours to train an experienced human welder. Using vision and IMU sensor will be able to set up a system and allow the worker got more accurate visual feedback like an experienced worker.

The problem is that monitor and measuring of the control process not always easy under a …

Stability Analysis And Design Of A Tracking Filter For Variable Frequency Applications, Pranav Aramane

Theses and Dissertations--Electrical and Computer Engineering

The work presented in this thesis is a frequency adaptive tracking filter that can be used in exact tracking of power frequencies and rejection of unwanted harmonics introduced during power disturbances. The power synchronization process includes power converters and other equipment that have many non-linear components that introduce unwanted harmonics. This new design is motivated by the requirement of a filter that can filter all the harmonics and exactly track a rapidly varying fundamental frequency with little time delay and phase error. This thesis analyzes the proposed filter mathematically based on Lyapunov theory and simulations are presented to show the …

Resource Optimization In Wireless Sensor Networks For An Improved Field Coverage And Cooperative Target Tracking, Husam Sweidan

Dissertations, Master's Theses and Master's Reports

There are various challenges that face a wireless sensor network (WSN) that mainly originate from the limited resources a sensor node usually has. A sensor node often relies on a battery as a power supply which, due to its limited capacity, tends to shorten the life-time of the node and the network as a whole. Other challenges arise from the limited capabilities of the sensors/actuators a node is equipped with, leading to complication like a poor coverage of the event, or limited mobility in the environment. This dissertation deals with the coverage problem as well as the limited power and …