Controls and Control Theory Commons^™

Cyberattack Detection And Handling For Neural Network-Approximated Economic Model Predictive Control, Jihan Abou Halloun, Helen E. Durand

Chemical Engineering and Materials Science Faculty Research Publications

Cyberattacks on control systems can create unprofitable and unsafe operating conditions. To enhance safety and attack resiliency of control systems, cyberattack detection strategies can be developed. Prior work in our group has sought to develop cyberattack detection strategies that are integrated with an advanced control formulation known as Lyapunov-based economic model predictive control (LEMPC), in the sense that the controller properties can be used to analyze closed-loop stability in the presence or absence of undetected attacks. In this work, we consider neural network-approximated control laws, concepts for mitigating cyberattacks on such control laws, and how these ideas elucidate concepts in …

Lyapunov-Based Cyberattack Detection For Distinguishing Between Sensor And Actuator Attacks, Dominic Messina, Helen E. Durand

Chemical Engineering and Materials Science Faculty Research Publications

Control-theoretic cyberattack detection strategies are control strategies where control theory can be used in the design of the detection policies and analysis of stability properties with and without cyberattacks. This work provides a step toward understanding how to diagnose cyberattacks using control-theoretic cyberattack detection mechanisms. Specifically, we analyze the conditions under which a control-theoretic cyberattack detection strategy developed in our prior work to handle detection of simultaneous actuator and sensor attacks can be extended to distinguish between whether attacks are occurring on sensors or actuators. We present and evaluate heuristic concepts for attempting to diagnose sensor attacks; these again demonstrate …

Profit Considerations For Nonlinear Control-Integrated Cyberattack Detection On Process Actuators, Keshav Kasturi Rangan, Helen E. Durand

Chemical Engineering and Materials Science Faculty Research Publications

Prior research from our group developed a control-integrated active actuator cyberattack detection strategy. This strategy continuously probed for cyberattacks by updating target steady-states at every sampling time and then moving the process state toward these over the subsequent sampling period. Attacks were fagged if a Lyapunov function around the target steady-state did not decrease over a sampling period. This strategy had the benefit of ensuring safety of the process until an attack was detected. However, the continuous probing for attacks could decrease profit from the process compared to not probing for the attacks, which could limit the attractiveness of the …

Assessment Of Web Security Vulnerabilities For Common Open Source Virtualization Software, Said Ally

Tanzania Journal of Engineering and Technology (TJET)

Open-source hypervisors have emerged as an integral technology for virtualizing server resources in cloud and data center computing. Hypervisor security efficiency is determined by virtual machine isolation, which is a de facto adoption factor in the selection process, as well as its ability to respond to web attacks. This paper assesses the security performance of Proxmox VE and XenServer for type 1 hypervisors, and Kernel Virtual Machine and Oracle Virtual Box for type 2 hypervisors. Security analysis was conducted using common exposures extracted from vulnerability databases and mapped against the OWASP 2013 and 2017 projects. For clarity, experiments were carried …

Training Uav Teams With Multi-Agent Reinforcement Learning Towards Fully 3d Autonomous Wildfire Response, Bryce Hopkins

All Theses

As climate-exacerbated wildfires increasingly threaten landscapes and communities, there is an urgent and pressing need for sophisticated fire management technologies. Coordinated teams of Unmanned Aerial Vehicles (UAVs) present a promising solution for detection, assessment, and even incipient-stage suppression – especially when integrated into a multi-layered approach with other recent wildfire management technologies such as geostationary/polar-orbiting satellites and CCTV detection networks. However, there remains significant challenges in developing the necessary sensing, navigation, coordination, and communication subsystems that enable intelligent UAV teams. Further, federal regulations governing UAV deployment and autonomy pose constraints on real-world aerial testing, creating a disconnect between theoretical research …

Duality Of Ensemble Systems Through Moment Representations, Vignesh Narayanan, Wei Zhang, Jr-Shin Li

Publications

Controlling large-scale dynamic population systems, known as ensemble control, is a pervasive and essential task in many emerging applications from diverse scientific domains. Previous focuses in the area of ensemble control have been placed on seeking open-loop control strategies due to unavailability of state feedback information for each individual system in the ensemble. In this paper, we develop a foundational framework for analysis and control of ensemble systems with closed feedback control loops. We introduce the notion of ensemble moments and construct moment systems associated with the ensemble systems. By extending the classical moment problem in mathematical analysis and statistics, …

An Optimization Tool For A Standalone Photovoltaic System, Johanes Kasilima

Tanzania Journal of Engineering and Technology (TJET)

Stand-alone photovoltaic systems (SAPV) are often used in remote areas where access to grid electricity is limited. This system depends on solar energy. However, Photovoltaic (PV) systems need a greater initial investment than conventional sources of energy, and their effectiveness is reliant on a number of environmental conditions such as the unpredictable solar radiation. One step in reducing the investment cost of a PV system is determining the optimal size of solar PV components that minimize costs. This paper presents a Particle Swarm based optimization tool for sizing Stand-alone PV systems. The optimization tool selects the optimal Levelized Cost of …

Identification Of Faults In Highways Using Approximation Methods And Algorithms, Khudayberdiyev Khakkulmirzayevich Mirzaakbar, Anvar Asatilloyevich Ravshanov

Chemical Technology, Control and Management

Many fast Fourier transforms are used to identify defective parts of uneven surfaces on roads and send information to relevant organizations on the road, using the " RAVON YO‘LLAR" application installed on a mobile device during car movement. We determine the uneven parts of the road. Smooth and well-maintained roads reduce the risk of vehicle collisions, skidding and other road-related incidents. Timely measures contribute to overall safety, comfort and economic efficiency.

Reinforcement Learning For Optimal Kicking Actions In Humanoid Robotics: Advancing Robotic Autonomy And Versatility, Suresh Dodda, Sathish Kumar Chintala, Sukender Reddy Mallreddy, Sharath Chandra Macha, Yashwanth Vasa, Sapan Bharadwaj Bonala, Navin Kamuni, Sujatha Alla

Engineering Management & Systems Engineering Faculty Publications

Acquiring the necessary skills to perform a work effectively and efficiently requires a significant investment of time and computing power. Previous applications of Reinforcement Learning (RL) for action optimization in humanoid robotics have shown how promising this technology is for moving robotics towards true autonomy and versatility. Therefore, this study offers the first use of RL to create an entirely optimal kicking action for the Alderbaran Nao robot. Kicking motions that were steady, precise, quick, and able to kick farther than any existing RoboCup squad were generated by optimizing for a multi-objective reward function. We demonstrate that the ideal kicking …

Structured Invariant Subspace And Decomposition Of Systems With Time Delays And Uncertainties, Huan Phan-Van, Keqin Gu

SIUE Faculty Research, Scholarship, and Creative Activity

This article discusses invariant subspaces of a matrix with a given partition structure. The existence of a nontrivial structured invariant subspace is equivalent to the possibility of decomposing the associated system with multiple feedback blocks such that the feedback operators are subject to a given constraint. The formulation is especially useful in the stability analysis of time-delay systems using the Lyapunov-Krasovskii functional approach where computational efficiency is essential in order to achieve accuracy for large scale systems. The set of all structured invariant subspaces are obtained (thus all possible decompositions are obtained as a result) for the coupled differential-difference equations …

Data Driven And Machine Learning Based Modeling And Predictive Control Of Combustion At Reactivity Controlled Compression Ignition Engines, Behrouz Khoshbakht Irdmousa

Dissertations, Master's Theses and Master's Reports

Reactivity Controlled Compression Ignition (RCCI) engines operates has capacity to provide higher thermal efficiency, lower particular matter (PM), and lower oxides of nitrogen (NOx) emissions compared to conventional diesel combustion (CDC) operation. Achieving these benefits is difficult since real-time optimal control of RCCI engines is challenging during transient operation. To overcome these challenges, data-driven machine learning based control-oriented models are developed in this study. These models are developed based on Linear Parameter-Varying (LPV) modeling approach and input-output based Kernelized Canonical Correlation Analysis (KCCA) approach. The developed dynamic models are used to predict combustion timing (CA50), indicated mean effective pressure (IMEP), …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Optimal And Robust Control Problems Of Microalgae Cultivation, Mariana Rodriguez-Jara, Luis A. Ricardez-Sandoval, Carlos E. Ramirez-Castelan, Hector Puebla

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

The Algorithm For The Design Of Fine Granular Substances’ Smart-Type Heat And Moisture Converters Based On Their Accuracy And Speed Criteria, Erkin Uljaev, Ali Abduakhatovich Abduraxmanov

Chemical Technology, Control and Management

The paper describes a technique and algorithm allowing to perform parametric design of smart-type heat and moisture converters (hereinafter SHMC) of fine-grained dispersive materials based on their criteria of accuracy and speed. The proposed algorithm optimizes the process of design of smart-type switches and ensure optimal performance of the switches. The method of calculation and selection of optimal parameters of smart-type heat and moisture converters intended to be used in the measurement of parameters such as heat and humidity of fine dispersive substances are aimed at boosting two parameters, i.e., the accuracy and speed. Also, the design stages have been …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Moment-Based Reinforcement Learning For Ensemble Control, Yao-Chi Yu, Vignesh Narayanan, Jr-Shin Li

Publications

Problems involving controlling the collective behavior of a population of structurally similar dynamical systems, the so-called ensemble control, arise in diverse emerging applications and pose a grand challenge in systems science and control engineering. Owing to the severely under-actuated nature and the difficulty of placing large-scale sensor networks, ensemble systems are limited to being actuated and monitored at the population level. Moreover, mathematical models describing the dynamics of ensemble systems are often elusive. Therefore, it is essential to design broadcast controls that excite the entire population in such a way that the heterogeneity in system dynamics are robustly compensated. In …

Cooperative Deep Q -Learning Framework For Environments Providing Image Feedback, Krishnan Raghavan, Vignesh Narayanan, Sarangapani Jagannathan

Publications

In this article, we address two key challenges in deep reinforcement learning (DRL) setting, sample inefficiency, and slow learning, with a dual-neural network (NN)-driven learning approach. In the proposed approach, we use two deep NNs with independent initialization to robustly approximate the action-value function in the presence of image inputs. In particular, we develop a temporal difference (TD) error-driven learning (EDL) approach, where we introduce a set of linear transformations of the TD error to directly update the parameters of each layer in the deep NN. We demonstrate theoretically that the cost minimized by the EDL regime is an approximation …

Distributed Learning With Automated Stepsizes, Benjamin Liggett

All Theses

Stepsizes for optimization problems play a crucial role in algorithm convergence, where the stepsize must undergo tedious manual tuning to obtain near-optimal convergence. Recently, an adaptive method for automating stepsizes was proposed for centralized optimization. However, this method is not directly applicable to decentralized optimization because it allows for heterogeneous agent stepsizes. Furthermore, directly using consensus between agent stepsizes to mitigate stepsize heterogeneity can decrease performance and even lead to divergence.

This thesis proposes an algorithm to remedy the tedious manual tuning of stepsizes in decentralized optimization. Our proposed algorithm automates the stepsize and uses dynamic consensus between agents’ stepsizes …

Machine Learning Approach For Classifying Power Outage In Secondary Electric Distribution Network, Stephan Mgaya, Hellen Maziku

Tanzania Journal of Engineering and Technology (TJET)

Power outage is the problem that hinders social and economic development especially for developing countries like Tanzania. Frequent power outages damage electric equipment, and negatively affect the industrial production process. Power outages cannot be completely eradicated due to uncontrolled cause like natural calamities but technical challenges can be managed and hence reducing power outages. The existing manual methods used to locate power outage like customer calls is inefficient and time consuming. On the other hand, modern method like the Advanced Metering Infrastructure (AMI) still faces a challenge in effectively classifying power line outage due to the nature of imbalanced datasets. …

Control Implemented On Quantum Computers: Effects Of Noise, Nondeterminism, And Entanglement, Kip Nieman, Keshav Kasturi Rangan, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computing has advanced in recent years to the point that there are now some quantum computers and quantum simulators available to the public for use. In addition, quantum computing is beginning to receive attention within the process systems engineering community for directions such as machine learning and optimization. A logical next step for its evaluation within process systems engineering is for control, specifically for computing control actions to be applied to process systems. In this work, we provide some initial studies regarding the implementation of control on quantum computers, including the implementation of a single-input/single-output proportional control law on …

Robust Sensor Design For The Novel Reduced Models Of The Mead-Marcus Sandwich Beam Equation, Ahmet Aydin

Masters Theses & Specialist Projects

Novel space-discretized Finite Differences-based model reductions are proposed for the partial differential equations (PDE) model of a multi-layer Mead-Marcus-type beam with (i) hinged-hinged and (ii) clamped-free boundary conditions. The PDE model describes transverse vibrations for a sandwich beam whose alternating outer elastic layers constrain viscoelastic core layers, which allow transverse shear. The major goal of this project is to design a single boundary sensor, placed at the tip of the beam, to control the overall dynamics on the beam.

For (i), it is first shown that the PDE model is exactly observable by the so-called nonharmonic Fourier series approach. However, …

Implementation Of Digital Transformation In The Technical Higher Education Institutions In Tanzania, Charles Raphael

Tanzania Journal of Engineering and Technology (TJET)

Digital transformation has been prioritized recently in this era of fourth industrial revolution by various organizations for maintaining strong competitive advantage, especially in the fourth industrial revolution. The higher education institutions must likewise adopt and implement digital transformation to enrich their students with the knowledge, experience and the skills they need for a very different future. Technical higher education institutions are inevitable in the given transformation. However, very little is known regarding adoption of digital transformation in the given institutions. This study therefore examined the level of adoption of digital services in the technical higher education institutions in Tanzania. It …

Actuator Cyberattack Handling Using Lyapunov-Based Economic Model Predictive Control, Keshav Kasturi Rangan, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity has gained increasing interest as a consequence of the potential impacts of cyberattacks on profits and safety. While attacks can affect various components of a plant, prior work from our group has focused on the impact of cyberattacks on control components such as process sensors and actuators and the development of detection strategies for cybersecurity derived from control theory. In this work, we provide greater focus on actuator attacks; specifically, we extend a detection and control strategy previously applied for sensor attacks and based on an optimization-based control technique called Lyapunov-based economic model predictive control (LEMPC) to detect attacks …

Test Methods For Image-Based Information In Next-Generation Manufacturing, Henrique Oyama, Dominic Messina, Renee O'Neill, Samantha Cherney, Minhazur Rahman, Keshav Kasturi Rangan, Govanni Gjonaj, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Typical control designs in the process systems engineering literature have assumed that the primary sensing methodologies are traditional instruments such as thermocouples. Dig- italization is changing the landscape for manufacturing, and data-based sensing modalities (e.g., image-based sensing) are becoming of greater interest for plant control. These considerations require novel test/evaluation solutions. For example, process systems engineering researchers may wish to test image-based sensors in simulation. In this work, we provide preliminary thoughts on how image-based technologies might be evaluated via simulation for process systems.

Quantum Computing And Resilient Design Perspectives For Cybersecurity Of Feedback Systems, Keshav Kasturi Rangan, Jihan Abou Halloun, Henrique Oyama, Samantha Cherney, Ilham Azali Assoumani, Nazir Jairazbhoy, Helen Durand, Simon Ka Ng

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity of control systems is an important issue in next-generation manufac- turing that can impact both operational objectives (safety and performance) as well as process designs (via hazard analysis). Cyberattacks differ from faults in that they can be coordinated efforts to exploit system vulnerabilities to create otherwise unlikely hazard scenarios. Because coordination and targeted process manipulation can be characteristics of attacks, some of the tactics previously analyzed in our group from a control system cybersecurity perspective have incorporated randomness to attempt to thwart attacks. The underlying assumption for the generation of this randomness has been that it can be achieved …

Challenges And Opportunities For Next-Generation Manufacturing In Space, Kip Nieman, A. F. Leonard, Katie Tyrell, Dominic Messina, Rebecca Lopez, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

With commercial space travel now a reality, the idea that people might spend time on other planets in the future seems to have greater potential. To make this possible, however, there needs to be flexible means for manufacturing in space to enable tooling or resources to be created when needed to handle unexpected situations. Next-generation manufacturing paradigms offer significant potential for the kind of flexibility that might be needed; however, they can result in increases in computation time compared to traditional control methods that could make many of the computing resources already available on earth attractive for use. Furthermore, resilience …

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, A. F. Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Next-generation manufacturing involves increasing use of automation and data to enhance process efficiency. An important question for the chemical process industries, as new process systems (e.g., intensified processes) and new data modalities (e.g., images) are integrated with traditional plant automation concepts, will be how to best evaluate alternative strategies for data-driven modeling and synthesizing process data. Two methods which could be used to aid in this are those which aid in testing data-based techniques on-line, and those which enable various data-based techniques to be assessed in simulation. In this work, we discuss two techniques in this domain which can be …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Improving Intelligent Transportation Safety And Reliability Through Lowering Costs, Integrating Machine Learning, And Studying Model Sensitivity, Cavender Holt

All Theses

As intelligent transportation becomes increasingly prevalent in the domain of transportation, it is essential to understand the safety, reliability, and performance of these systems. We investigate two primary areas in the problem domain. The first area concerns increasing the feasibility and reducing the cost of deploying pedestrian detection systems to intersections in order to increase safety. By allowing pedestrian detection to be placed in intersections, the data can be better utilized to create systems to prevent accidents from occurring. By employing a dynamic compression scheme for pedestrian detection, we show the reduction of network bandwidth improved by 2.12× over the …