Controls and Control Theory Commons^™

Cyber-Based Contingency Analysis And Insurance Implications Of Power Grid, Zhiyuan Yang

Dissertations, Master's Theses and Master's Reports

Cybersecurity for power communication infrastructure is a serious subject that has been discussed for a decade since the first North American Electric Reliability Corporation (NERC) critical infrastructure protection (CIP) initiative in 2006. Its credibility on plausibility has been evidenced by attack events in the recent past. Although this is a "very high impact, rare probability" event, the establishment of quantitative measures would help asset owners in making a series of investment decisions. First, this dissertation tackles attackers' strategies based on the current communication architecture between remote IP-based (unmanned) power substations and energy control centers. Hypothetically, the identification of intrusion paths …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

Optimal Microgrids Placement In Electric Distribution Systems Using Complex Network Framework, Mahmoud Saleh, Yusef Esa, Nwabueze Onuorah, Ahmed Mohamed

Publications and Research

This paper provides a new approach to find the optimal location for Microgrids (MGs) in electric distribution systems using complex network analysis. An optimal location in this paper refers to a location that would result in increased grid resilience, reduced power losses, less line loading, higher voltage stability and secured supply to critical loads during power outage. The criteria used to find the optimal placement of MGs were based on the centrality analysis adopted from complex network theory, the center of mass concept used in physics, and the controlled delivery grid (CDG) concept. An IEEE 30-bus system was used as …

Energy Management Algorithm For Resilient Controlled Delivery Grids, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed, Haim Grebel, Roberto Rojas-Cessa

Publications and Research

Resilience of the power grid is most challenged at power blackouts since the issues that led to it may not be fully resolved by the time the power is back. In this paper, a Real-Time Energy Management Algorithm (RTEMA) has been developed to increase the resilience of power systems based on the controlled delivery grid (CDG) concept. In a CDG, loads communicate with a central controller, periodically sending requests for power. The central controller runs an algorithm, based on which it may decide whether to grant the requested energy fully or partially. Therefore, the CDG limits loads discretionary access to …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

A Novel Time-Domain Method Of Fault Diagnosis In Induction Motors, Bryan J. Davis

Honors Scholar Theses

This paper introduces a novel time-domain method for detecting the four major types of induction motor faults without requiring complex signal processing or additional sensors other than those already in place for closed-loop motor control. This method artificially modulates the motor current feedback signal with a perturbed frequency that oscillates about the characteristic frequency of the fault in question. After filtering out the unwanted frequency components that result from the modulation, the selected fault-indicative component is a very slow sinusoid that is only present when the fault is present. The method looks for this fault-indicative component by monitoring the time …

Centralized Control For Dc Microgrid Using Finite State Machine, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

In this paper, an autonomous communication-based centralized control for DC microgrids (MG) has been developed and implemented. The proposed controller enables smooth transition between various operating modes. Finite state machine (FSM) has been used to mathematically describe the various operating modes (states), and events that may lead to mode changes (transitions). Therefore, the developed centralized controller aims at optimizing the performance of MG during all possible operational scenarios, while maintaining its reliability and stability. Results of selected cases have been presented. These results show stable transition between modes, verifying the validity and applicability of the proposed controller.

Omni-Directional Infrared 3d Reconstruction And Tracking Of Human Targets, Emrah Benli

Theses and Dissertations

Omni-directional (O-D) infrared (IR) vision is an effective capability for mobile systems in robotics, due to its advantages: illumination invariance, wide field-of-view, ease of identifying heat-emitting objects, and long term tracking without interruption. Unfortunately, O-D IR sensors have low resolution, low frame rates, high cost, sensor noise, and an increase in tracking time. In order to overcome these disadvantages, we propose an autonomous system application in indoor scenarios including 1) Dynamic 3D Reconstruction (D3DR) of the target view in real time images, 2) Human Behavior-based Target Tracking from O-D thermal images, 3) Thermal Multisensor Fusion (TMF), and 4) Visual Perception …

Position Control Of An Unmanned Aerial Vehicle From A Mobile Ground Vehicle, Astha Tiwari

Dissertations, Master's Theses and Master's Reports

Quadcopters have been developed with controls providing good maneuverability, simple mechanics, and the ability to hover, take-off and land vertically with precision. Due to their small size, they can get close to targets of interest and furthermore stay undetected at lower heights. The main drawbacks of a quadcopter are its high-power consumption and payload restriction, due to which, the number of onboard sensors is constrained. To overcome this limitation, vision-based localization techniques and remote control for the quadcopter are essential areas of current research. The core objective of this research is to develop a closed loop feedback system between an …

Cal Poly Supermileage Electronic Fuel Injection, Alexander Pink

Electrical Engineering

Cal Poly Supermileage is a student-run engineering club that builds prototype gasoline vehicles optimized maximum fuel-efficiency. To power their vehicles, the Supermileage team makes use of single-cylinder, 4-stroke, electronically fuel-injected (EFI) gasoline engines. This report details the development, iterative design & test cycles, and integration of an EFI system for the Supermileage club. This project develops an EFI system that interfaces to the most common types of sensors found in the low-power Supermileage-range of engines, including throttle-position sensors, manifold absolute pressure sensors, gear-tooth hall-effect sensors, variable-reluctance position sensors, engine coolant temperature sensors, intake air temperature sensors, and exhaust oxygen sensors. …

Impact Of Clustering Microgrids On Their Stability And Resilience During Blackouts, Mahmoud S. Saleh, Ammar Althaibani, Yusef Esa, Yassine Mhandi, Ahmed Mohamed

Publications and Research

In this paper, the impact of clustering multiple microgrids during blackouts, on their stability and supply availability, will be investigated. Microgrids have the capability of satisfying their emergency loads during blackouts. However, distributed energy resources (DERs)-dominated microgrids are affected by the uncertainty of their input energy supply, e.g. impact of solar irradiance on photovoltaic (PV) output. Moreover, an individual islanded microgrid is prone to instability issues due to large sudden load/generation changes. In order to increase the supply security, and enhance system stability, we propose to use the existing distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …

Measurement And Modeling Of Humidity Sensors, Jingbo Tong

Theses and Dissertations--Electrical and Computer Engineering

Humidity measurement has been increasingly important in many industries and process control applications. This thesis research focus mainly on humidity sensor calibration and characterization. The humidity sensor instrumentation is briefly described. The testing infrastructure was designed for sensor data acquisition, in order to compensate the humidity sensor’s temperature coefficient, temperature chambers using Peltier elements are used to achieve easy-controllable stable temperatures. The sensor characterization falls into a multivariate interpolation problem. Neuron networks is tried for non-linear data fitting, but in the circumstance of limited training data, an innovative algorithm was developed to utilize shape preserving polynomials in multiple planes in …

Meat Smoker, Rhianna Topp

Electrical Engineering

This Senior Project consists of designing and building a meat smoker. The design of this meat smoker incorporates knowledge of control systems, programming, hardware, and materials manufacturing. This smoker is made to allow the user an easy experience of smoking food. The smoker provides the user with a programmable temperature and timer. It also has an automatic wood chip loader as deemed necessary to keep the correct amount of smoke distributed. Lastly, this smoker has an automatic application of the user’s choice of liquid to the meat. By designing a smoker with these capabilities, an untrained person desiring to smoke …

Improvements In Genetic Approach To Pole Placement In Linear State Space Systems Through Island Approach Pga With Orthogonal Mutation Vectors, Arnold Cassell

UNF Graduate Theses and Dissertations

This thesis describes a genetic approach for shaping the dynamic responses of linear state space systems through pole placement. This paper makes further comparisons between this approach and an island approach parallel genetic algorithm (PGA) which incorporates orthogonal mutation vectors to increase sub-population specialization and decrease convergence time.

Both approaches generate a gain vector K. The vector K is used in state feedback for altering the poles of the system so as to meet step response requirements such as settling time and percent overshoot. To obtain the gain vector K by the proposed genetic approaches, a pair of ideal, desired …

Bridgeless Active Power Factor Correction Using A Current Fed Push Pull Converter, Jeramie Seth Bianchi

Master's Theses

ABSTRACT

Bridgeless Active Power Factor Correction

Using a Current Fed Push Pull Converter

Jeramie Seth Bianchi

Switched Mode Power Supplies have become increasingly popular for efficient methods of delivering power to an assortment of electronic devices. This thesis proposes a method of using a current fed push pull converter to provide active power factor correction and rectification in a single stage. While most AC-DC converters utilize a bridge rectifier to convert AC-DC and then perform DC-DC conversion, the proposed circuit will utilize its output diodes to perform rectification, thus eliminating the need for a bridge rectifier. This circuit will also …

Increasing Efficiency In Boundary Security With Wireless Sensor Networks And Geospatial Information Systems Using Homology Theory, Luis Berumen^, Eric Chaidez^, Hamide Dogan*, Jose Gerardo Rosiles**

COURI Symposium Abstracts, Spring 2011

As part of an institutional investigation, we attempt to address the challenges the US customs and Border protection agency faces in the El Paso region. Our research focuses on defining a system for the surveillance application, and the use of mathematical models employed to achieve a greater efficiency of such architecture. With the use of the defined system, we apply homology theory through the algebraic process of topology, to accomplish an independent coordinate-free based system, which covers the surveillance area, with lesser quantity of sensor nodes. Our architecture makes the use of an operating system for wireless sensor networks; TinyOS, …

Solar Panel Tracker, Andrew Hsing

Electrical Engineering

This project will be a design and implementation of a polar single axis solar panel tracker. It will have a fixed vertical axis and an adjustable horizontal motor controlled axis. This setup is similar to an office swivel chair. The tracker will actively track the sun and change its position accordingly to maximize the energy output. To prevent wasting power by running the motor continuously, the tracker will correct it's position after 2 to 3 degrees of misalignment. The sensors will compare the light intensities of each side and move the panels until the tracker detects equal light on both …

Automated Basketball Return System, Victor Mendoza, Chris Chamberlain

Electrical Engineering

The project is meant to assist a basketball player in their practicing. The project hangs directly on the basketball rim and automatically rotates to find the player on the court. Once the player is detected, the automated basketball return system (ABRS) stays focused in the direction of the player so that any baskets successfully made will be funneled back to the player. When the player moves from center, IR motion detectors find which direction you moved to and rotates accordingly, until the player is focused in front of the funnel again. If at any time the player is absent from …

On The Empirical Balanced Truncation For Nonlinear Systems, Marissa Condon, Rossen Ivanov

Articles

Novel constructions of empirical controllability and observability gramians for nonlinear systems for subsequent use in a balanced truncation style of model reduction are proposed. The new gramians are based on a generalisation of the fundamental solution for a Linear Time-Varying system. Relationships between the given gramians for nonlinear systems and the standard gramians for both Linear Time-Invariant and Linear Time-Varying systems are established as well as relationships to prior constructions proposed for empirical gramians. Application of the new gramians is illustrated through a sample test-system.

Joint Wavelet Transform Correlation With Separated Target And Reference Planes, Boon Yi Soon, Mohammad A. Karim, Russell C. Hardie, Mohammad S. Alam

Electrical and Computer Engineering Faculty Publications

In recent years, we realize the usefulness of feature extraction for optical correlator and hereby, we investigate the capability of Laplace operator in feature extraction of multiple targets. The first-order terms and the false alarm terms in the correlation output would be removed using electronic power spectrum subtraction technique. Most importantly, the entire magneto-optic SLM is completely utilized for displaying only targets in the input scene. A new cost efficient hardware implementation is proposed and aforementioned result of the proposed system is evaluated through computer simulation.

Study Of Longitudinal Landing Flying Qualities Evaluation Using Pilot Model Theory, Eric D. Didomenico

Theses and Dissertations

Control Anticipation Parameter (CAP), used in MIL-SPEC-8785C as a longitudinal handling qualities criterion does not adequately distinguish between different flight phases. Recent flight test data from the Landing Approach Higher Order Systems (LAHOS) study further indicate the inadequacy of the second order approximations for higher order longitudinal landing flying qualities. Nine Aircraft that fall within the Level 1 boundary reveal pilot ratings ranging from 1.5 to 10 (Cooper/Harper). These nine aircraft are studied by combining their longitudinal dynamics with pilot modelling to examine a better method of landing flying quality prediction and evaluation. Pilot model theory (cross-over pilot model) is …