Biomedical Commons^™

Novel Bayesian Neural Networks And Uncertainty Quantification Of Computational Mechanics Models, Ponkrshnan Thiagarajan

Dissertations, Master's Theses and Master's Reports

Computational and data-driven models suffer from a wide range of uncertainties that impact the reliability of such models. Given the exponential proliferation of machine learning models in real-world systems, establishing a degree of confidence in their predictions becomes paramount. Reliability in predictions takes on utmost significance in domains such as autonomous driving, medical image analysis, etc., where human lives are involved, and inaccuracies in predictions could lead to disastrous outcomes. For these reasons, comprehending and quantifying uncertainties in computational and data-driven models is of utmost importance. A number of techniques have been developed to quantify uncertainties in machine learning models. …

Heart Disease Prediction Using Stacking Model With Balancing Techniques And Dimensionality Reduction, Ayesha Noor, Nadeem Javaid, Nabil Alrajeh, Babar Mansoor, Ali Khaqan, Safdar Hussain Bouk

School of Cybersecurity Faculty Publications

Heart disease is a serious worldwide health issue with wide-reaching effects. Since heart disease is one of the leading causes of mortality worldwide, early detection is crucial. Emerging technologies like Machine Learning (ML) are currently being actively used by the biomedical, healthcare, and health prediction industries. PaRSEL, a new stacking model is proposed in this research, that combines four classifiers, Passive Aggressive Classifier (PAC), Ridge Classifier (RC), Stochastic Gradient Descent Classifier (SGDC), and eXtreme Gradient Boosting (XGBoost), at the base layer, and LogitBoost is deployed for the final predictions at the meta layer. The imbalanced and irrelevant features in the …

Dfhic: A Dilated Full Convolution Model To Enhance The Resolution Of Hi-C Data, Bin Wang, Kun Liu, Yaohang Li, Jianxin Wang

Computer Science Faculty Publications

Motivation: Hi-C technology has been the most widely used chromosome conformation capture(3C) experiment that measures the frequency of all paired interactions in the entire genome, which is a powerful tool for studying the 3D structure of the genome. The fineness of the constructed genome structure depends on the resolution of Hi-C data. However, due to the fact that high-resolution Hi-C data require deep sequencing and thus high experimental cost, most available Hi-C data are in low-resolution. Hence, it is essential to enhance the quality of Hi-C data by developing the effective computational methods.

Results: In this work, we propose …

Ultrasensitive Tapered Optical Fiber Refractive Index, Erem Ujah, Meimei Lai, Gymama Slaughter

Electrical & Computer Engineering Faculty Publications

Refractive index (RI) sensors are of great interest for label-free optical biosensing. A tapered optical fiber (TOF) RI sensor with micron-sized waist diameters can dramatically enhance sensor sensitivity by reducing the mode volume over a long distance. Here, a simple and fast method is used to fabricate highly sensitive refractive index sensors based on localized surface plasmon resonance (LSPR). Two TOFs (l = 5 mm) with waist diameters of 5 µm and 12 µm demonstrated sensitivity enhancement at λ = 1559 nm for glucose sensing (5-45 wt%) at room temperature. The optical power transmission decreased with increasing glucose concentration due …

Atlas-Based Shared-Boundary Deformable Multi-Surface Models Through Multi-Material And Two-Manifold Dual Contouring, Tanweer Rashid, Sharmin Sultana, Mallar Chakravarty, Michel Albert Audette

Electrical & Computer Engineering Faculty Publications

This paper presents a multi-material dual “contouring” method used to convert a digital 3D voxel-based atlas of basal ganglia to a deformable discrete multi-surface model that supports surgical navigation for an intraoperative MRI-compatible surgical robot, featuring fast intraoperative deformation computation. It is vital that the final surface model maintain shared boundaries where appropriate so that even as the deep-brain model deforms to reflect intraoperative changes encoded in ioMRI, the subthalamic nucleus stays in contact with the substantia nigra, for example, while still providing a significantly sparser representation than the original volumetric atlas consisting of hundreds of millions of voxels. The …

Commentary On Healthcare And Disruptive Innovation, Hilary Finch, Affia Abasi-Amefon, Woosub Jung, Lucas Potter, Xavier-Lewis Palmer

Electrical & Computer Engineering Faculty Publications

Exploits of technology have been an issue in healthcare for many years. Many hospital systems have a problem with “disruptive innovation” when introducing new technology. Disruptive innovation is “an innovation that creates a new market by applying a different set of values, which ultimately overtakes an existing market” (Sensmeier, 2012). Modern healthcare systems are historically slow to accept new technological advancements. This may be because patient-based, provider-based, or industry-wide decisions are tough to implement, giving way to dire consequences. One potential consequence is that healthcare providers may not be able to provide the best possible care to patients. For example, …

Dataset For Effects Of Single-Session Practice Structure On Motor Skill Acquisition And Alpha And Beta Eeg Oscillations, Audrey Porter, Ronald V. Croce, Wayne Smith

Faculty Publications

Although it is known that practicing a motor skill updates the associated internal model, it is still unclear as to how cortical oscillations linked with the motor skill change under differing practice schedules. The current study investigated α- and β-power changes associated with motor skill acquisition. Firstly, we investigated the behavioral effects of practice on motor learning and retention during repetitive (RP) and variable (VP) practice schedules on an anticipation timing task. Secondly, we investigated changes in cortical α (10-13 HZ) and β (15-30 Hz) event-related synchronization and dyssynchronization (ERS/ERD) under RP and VP during early (EP) and late …

An Xai Approach For Covid-19 Detection Using Transfer Learning With X-Ray Images, Salih Sarp, Ferhat Ozgur Catak, Murat Kuzlu, Umit Cali, Huseyin Kusetogullari, Yanxiao Zhao, Gungor Ates, Ozgur Guler

Engineering Technology Faculty Publications

The coronavirus disease (COVID-19) has continued to cause severe challenges during this unprecedented time, affecting every part of daily life in terms of health, economics, and social development. There is an increasing demand for chest X-ray (CXR) scans, as pneumonia is the primary and vital complication of COVID-19. CXR is widely used as a screening tool for lung-related diseases due to its simple and relatively inexpensive application. However, these scans require expert radiologists to interpret the results for clinical decisions, i.e., diagnosis, treatment, and prognosis. The digitalization of various sectors, including healthcare, has accelerated during the pandemic, with the use …

Virtual Surgical Planning In Craniomaxillofacial Surgery: A Structured Review, Kaye Verlarde, Rentor Cafino, Armando Isla Jr., Karen Mae Ty, Xavier-Lewis Palmer, Lucas Potter, Larry Nadorra, Luchin Valrian Pueblos, Lemuel Clark Velasco

Electrical & Computer Engineering Faculty Publications

Craniomaxillofacial (CMF) surgery is a challenging and very demanding field that involves the treatment of congenital and acquired conditions of the face and head. Due to the complexity of the head and facial region, various tools and techniques were developed and utilized to aid surgical procedures and optimize results. Virtual Surgical Planning (VSP) has revolutionized the way craniomaxillofacial surgeries are planned and executed. It uses 3D imaging computer software to visualize and simulate a surgical procedure. Numerous studies were published on the usage of VSP in craniomaxillofacial surgery. However, the researchers found inconsistency in the previous literature which prompted the …

Social-Engineering, Bio-Economies, And Nation-State Ontological Security: A Commentary, Brandon Griffin, Keitavius Alexander, Xavier-Lewis Palmer, Lucas Potter

Electrical & Computer Engineering Faculty Publications

Biocybersecurity is an evolving discipline that aims to identify the gaps and risks associated with the convergence of Biology (the science of life and living organisms) and cybersecurity (the science, study, and theory of cyberspace and cybernetics) to protect the bioeconomy. The biological industries’ increased reliance on digitization, automation, and computing power has resulted in benefits for the scientific community, it has simultaneously multiplied the risk factors associated with industrial espionage and the protection of data both commercial and proprietary. The sensitive and potentially destructive power of this data and its access inherently poses a risk to the national and …

Detection Of Various Dental Conditions On Dental Panoramic Radiography Using Faster R-Cnn, Shih Lun Chen, Tsung Yi Chen, Yi Cheng Mao, Szu Yin Lin, Ya Yun Huang, Chiung An Chen, Yuan Jin Lin, Mian Heng Chuang, Patricia Angela R. Abu

Department of Information Systems & Computer Science Faculty Publications

The dental panoramic radiograph (DPR) is a pivotal diagnostic tool in dentistry. However, despite the growing prevalence of artificial intelligence (AI) across various medical domains, manual methods remain the prevailing means of interpreting DPR images. This study aims to introduce an advanced identification system for detecting seven dental conditions in DPR images by utilizing Faster R-CNN. The primary objectives are to enhance dentists' efficiency and evaluate the performance of various CNN models as foundational training networks. This study contributes significantly to the field in several notable ways. Firstly, including a Butterworth filter in the training process yielded an approximately 7% …

Opioid Use Disorder Prediction Using Machine Learning Of Fmri Data, A. Temtam, Liangsuo Ma, F. Gerard Moeller, M. S. Sadique, K. M. Iftekharuddin, Khan M. Iftekharuddin (Ed.), Weijie Chen (Ed.)

Electrical & Computer Engineering Faculty Publications

According to the Centers for Disease Control and Prevention (CDC) more than 932,000 people in the US have died since 1999 from a drug overdose. Just about 75% of drug overdose deaths in 2020 involved Opioid, which suggests that the US is in an Opioid overdose epidemic. Identifying individuals likely to develop Opioid use disorder (OUD) can help public health in planning effective prevention, intervention, drug overdose and recovery policies. Further, a better understanding of prediction of overdose leading to the neurobiology of OUD may lead to new therapeutics. In recent years, very limited work has been done using statistical …

Transfer Learning Using Infrared And Optical Full Motion Video Data For Gender Classification, Alexander M. Glandon, Joe Zalameda, Khan M. Iftekharuddin, Gabor F. Fulop (Ed.), David Z. Ting (Ed.), Lucy L. Zheng (Ed.)

Electrical & Computer Engineering Faculty Publications

This work is a review and extension of our ongoing research in human recognition analysis using multimodality motion sensor data. We review our work on hand crafted feature engineering for motion capture skeleton (MoCap) data, from the Air Force Research Lab for human gender followed by depth scan based skeleton extraction using LIDAR data from the Army Night Vision Lab for person identification. We then build on these works to demonstrate a transfer learning sensor fusion approach for using the larger MoCap and smaller LIDAR data for gender classification.

Special Section Editorial: Artificial Intelligence For Medical Imaging In Clinical Practice, Claudia Mello-Thoms, Karen Drukker, Sian Taylor-Phillips, Khan Iftekharuddin, Marios Gavrielides

Electrical & Computer Engineering Faculty Publications

This editorial introduces the JMI Special Section on Artificial Intelligence for Medical Imaging in Clinical Practice.

Machine Learning For Biosensors, Gayathri Anapanani

Graduate Theses, Dissertations, and Problem Reports (ETD)

Biosensors have become increasingly popular as diagnostic tools due to their ability to detect and quantify biological analytes in a wide range of applications. With the growing demand for faster and more reliable biosensing devices, machine learning has become a valuable tool in enhancing biosensor performance. In this report, we review recent progress in the application of machine learning to biosensors. We discuss the potential benefits of using machine learning in biosensors, including improved sensitivity, selectivity, and accuracy. We also discuss the various machine learning techniques that have been applied to biosensors, including data preprocessing, feature extraction, and classification and …

Electron Beam Treatment For The Removal Of 1,4-Dioxane In Water And Wastewater, Robert Pearce, Xi Li, John Vennekate, Gianluigi Ciovati, Charles Bott

Electrical & Computer Engineering Faculty Publications

Electron beam (e-beam) treatment uses accelerated electrons to form oxidizing and reducing radicals when applied to water without the use of external chemicals. In this study, electron beam treatment was used to degrade 1,4-dioxane in several water matrices. Removal improved in the progressively cleaner water matrices and removals as high as 94% to 99% were observed at a dose of 2.3 kGy in secondary effluent. 1,4-dioxane removal was confirmed to be primarily through hydroxyl radical oxidation. The calculated electrical energy per order was found to be 0.53, 0.26, and 0.08 kWh/m³/order for secondary effluent (Avg. total organic carbon …

Toward Real-Time, Robust Wearable Sensor Fall Detection Using Deep Learning Methods: A Feasibility Study, Haben Yhdego, Christopher Paolini, Michel Audette

Electrical & Computer Engineering Faculty Publications

Real-time fall detection using a wearable sensor remains a challenging problem due to high gait variability. Furthermore, finding the type of sensor to use and the optimal location of the sensors are also essential factors for real-time fall-detection systems. This work presents real-time fall-detection methods using deep learning models. Early detection of falls, followed by pneumatic protection, is one of the most effective means of ensuring the safety of the elderly. First, we developed and compared different data-segmentation techniques for sliding windows. Next, we implemented various techniques to balance the datasets because collecting fall datasets in the real-time setting has …

Synthetic Heart Sound Dataset, Davoud Shariat Panah, Andrew Hines, Susan Mckeever

Datasets

The repository contains synthetic heart sound recordings. The publication related to this dataset is "Exploring the impact of noise and degradations on heart sound classification models", Biomedical Signal Processing and Control journal.

Analyzing Physiological Signals During The Menstrual Cycle: Introducing An Application Of Circular Statistics, Krystal D. Sides

UNF Graduate Theses and Dissertations

Physiological signals are used in engineering and the sciences to determine the state of functionality of certain physiological systems such as the human endometrium. Many women use the basal body temperature method to track ovulation, or their fertile window. However, temperature tracking alone is subject to environmental factors. Non-invasive wearable devices can be tools in recording cycle-related physiological features relevant to women’s health research. This research uses the Empatica E4 wristband to track changes in the physiological features during sleep across the menstrual cycle of ovulating and non-ovulating females. Due to the cyclic nature of menstrual cycles, analytic solutions to …