Electrical and Computer Engineering Commons^™

Improved Algorithms For Ear-Clipping Triangulation, Bartosz Kajak

UNLV Theses, Dissertations, Professional Papers, and Capstones

We consider the problem of improving ear-slicing algorithm for triangulating a simple polygon. We propose two variations of ear-slicing technique for generating “good-quality” triangulation. The first approach is based on searching for the best triangle along the boundary. The second approach considers polygon partitioning on a pre-process before applying the ear-slicing. Experimental investigation reveals that both approaches yield better quality triangulation than the standard ear-slicing method.

File System Simulation: Hierarchical Performance Measurement And Modeling, Hai Quang Nguyen

Graduate Theses and Dissertations

File systems are very important components in a computer system. File system simulation can help to predict the performance of new system designs. It offers the advantages of the flexibility of modeling and the cost and time savings of utilizing simulation instead of full implementation. Being able to predict end-to-end file system performance against a pre-defined workload can help system designers to make decisions that could affect their entire product line, involving several million dollars of investment. This dissertation presents detailed simulation-based performance models of the Linux ext3 file system and the PVFS parallel file system. The models are developed …

Design For Soft Error Tolerance In Fpga-Implemented Asynchronous Circuits, Yu Bai

Theses and Dissertations - UTB/UTPA

This research in its present form is the result of experimentation on effect of soft error in FPGA-implemented asynchronous circuit. The conclusion are drawn that asynchronous circuit are much easier to detect soft error than synchronous circuits. The asynchronous circuit is implemented in FPGA with software fault injection method to analyze the behavior of soft error generation in FPGA implementation asynchronous circuits. The proposed detection circuit can detect all soft errors that generated in FPGA-implemented asynchronous circuit. The contributions include: investigation of FPGA structure, investigation of soft error model in FPGA, mechanism of FPGA implemented asynchronous circuit, behavior of soft …

Experimental Evaluation Of Select Servers And Firewalls Under Denial Of Service Security Attacks, Raja Sekhar Reddy Gade

Theses and Dissertations - UTB/UTPA

Internet security requires newer prevention mechanisms to be implemented on web-servers and routers. Firewall/Intrusion Prevention mechanisms (IPS) can be deployed on host servers or routers as an added line of defense against Internet attacks. In this thesis, we evaluate performance of security mechanisms provided by these devices against Distributed Denial of Service (DDoS) attacks. The host based firewalls on Windows servers-2003 and 2008 were evaluated. In this thesis, we also evaluated Juniper Networks Netscreen-5GT firewall/IPS, and Cisco ASA-5510/IPS that are used in protecting web-servers against DDoS attacks. It was found that the host based firewalls and protection mechanisms on the …

A Methodology For Implementing Rf Bists In Production Testing To Replace Rf Conventional Tests, Deepa Mannath

Graduate Theses and Dissertations

Production testing of Radio Frequency (RF) devices is challenging due to the complex nature of the tests that have to be performed to verify functionality. In this dissertation a methodology to replace the complex and expensive RF functional tests with defect-oriented Built-in Self Tests (BiSTs) is detailed. If a design has sufficient margin to RF specifications then RF tests can be replaced with structural tests using a new data analysis technique called quadrant analysis, which is presented. Data from the analysis of over one million production units of said System on Chip (SoC) is presented along with the results of …

Photolithographic Fabrication Of 3d Penrose-Like Quasi-Photonic Crystal Polymeric Templates Utilizing Lab-Made Phasemask, Faraon Torres-Lazos

Theses and Dissertations - UTB/UTPA

Photonic crystals (PhC) have recently become of great interest because of their potential as replacement of electronics and/or supplement to semiconductors technology. The PhC’s capability to make compact integrated optical circuits has already made possible the laboratory manufacture of an array of different types of optical waveguides, cavities and filters. The work presented here aimed to simultaneously fabricate a 3D-PhC templates employing six-beam holographic lithography. The basic procedures included recording gratings using interference field of laser sources in a photoresist coating on a glass substrate. The manufacturing method utilized only one optical element, a phasemask, drastically reducing the complexity of …

Security Vulnerability Evaluation Of Popular Personal Firewalls And Operating Systems, Sirisha Surisetty

Theses and Dissertations - UTB/UTPA

In this thesis, experimental evaluation of security vulnerabilities has been performed under DoS attacks for popular personal firewalls from McAfee, Norton and Kaspersky; and for operating systems namely Apple’s Leopard and SnowLeopard, and Microsoft’s Windows XP and Windows 7. Our experimental results show that the firewalls and operating systems behave differently under a given DoS attack. Some of the firewalls crashed under certain DoS attacks especially when they were configured to prevent and block packets belonging to such attacks. Operating systems evaluated in this thesis were also found to have different built-in security capabilities, and some of them even crashed …

An Improved Wideband Vivaldi Antenna Design, Fang Chen

Theses and Dissertations - UTB/UTPA

The objectives of this thesis are to 1) determine how Vivaldi antenna parameters affect the performance and 2) design a Vivaldi antenna with improved overall performance over existing designs. The methodology is to divide the Vivaldi antenna into two parts consisting of microstrip-to-slotline transition and tapered curve part. This has great advantages in finding the relationships between the different antenna parameters and the antenna performance. By combining the methods of improving the impedance- and usable gain bandwidth concluded by the parameter study on the two individual parts, a final Vivaldi antenna design with 10:1 bandwidth is achieved in terms of …

The Implementation And Analysis Of Through Wall Radar Systems, Xiaohui Wang

Theses and Dissertations - UTB/UTPA

Through wall radar detecting, locating, imaging and tracking is a topic of current research interest in connection with law enforcement, urban area operations and search and rescue missions. Up to now, three different radar techniques are employed in through wall radar systems, including impulse through wall radar, continuous wave radar and swept frequency radar. In this thesis, we set out to give a comparison of these three kinds of through wall radar systems. First,we studied the challenges caused by the wall in through wall radar systems. Second,we implemented these three kinds of through wall radar system. In each kind of …

Asynchronous Designs On Fpga With Soft Error Tolerance For Security Algorithms, Deepya Reddy Nalubolu

Theses and Dissertations - UTB/UTPA

Asynchronous methodologies, such as Null Convention Logic (NCL), have tremendous potential in implementing digital logic. It is essential to design complex asynchronous circuits using commercial Electronic Design Automation (EDA) tools. The main focus of this thesis is to design NCL circuits using VHDL and implementing them on FPGAs. The major contributions of this thesis include: 1) Developing a methodology of designing NCL circuits with VHDL and applying it successfully to all practical designs in this thesis. 2) As an example, the NCL circuit for DES (Data Encryption Standard) algorithm has been designed and simulated using VHDL and the implementation issues …

Uwb Antennas For Medical Imaging, Khabat Ebnabbasi

Theses and Dissertations - UTB/UTPA

Ultra-Wide Band (UWB) Microwave for imaging applications; especially in the medical field, is a new method to overcome the inherent invasive features of X-ray imaging. In this work a new systematic and detailed design for the Tapered Slot Antenna (TSA) as a UWB antenna in microwave imaging systems for medical applications is presented. Among TSAs, the Vivaldi antenna was selected and the reasons to replace the horn antenna imaging systems are illustrated. In the first chapter the previous designs for microwave imaging and the outline of this work are given, Chapter Two covers the design of the Vivaldi antenna's different …

The Optimization Of Amplifiers For Uwb Applications, Kyoung D. Kim

Theses and Dissertations - UTB/UTPA

Optimizations of 0.18 μm and 0.5 μm MOSFET amplifiers without using inductors for UWB applications are presented. A 3 dB bandwidth from 3.1 GHz to 9.9 GHz with minimum 9.6 dB of transducer gain at 10.6 GHz and approximate 92.8 mWatts of total power consumption are achieved. The source and load impedances were 50 ohms. Also, the number of capacitors and resistors has been minimized. To predict characteristics more precisely, the pad capacitance is added to the output port. In addition, a different feedback topology is presented which gives a lower Noise Figure with maximum 7.73 dB at 10.6 GHz …

Moving And Stationary Target Acquisition Radar Image Enhancement Through Polynomial Windows, Rajarajeswari Devarajulu

Theses and Dissertations - UTB/UTPA

The Fourier transform involved in synthetic aperture radar (SAR) imaging causes undesired sidelobes which obscure weak backscatters and affect the image clarity. These sidelobes can be suppressed without deteriorating the image resolution by smoothing functions known as windowing or apodization. Recently, the theory of orthogonal polynomials has gained considerable attention in signal processing applications. The window functions that are derived from the orthogonal polynomials have interesting sidelobe roll-off properties for better sidelobe apodization, hence it can be used for radar image enhancement. In this work, a new window is constructed from Jacobi orthogonal polynomials and its performance in SAR imaging …

Design And Performance Evaluation Of Switching Architectures For High-Speed Internet, Alvaro Munoz

Theses and Dissertations - UTB/UTPA

The motivation for this thesis is the desire to build faster and scalable routers that efficiently handle the exponential traffic growth in the Internet. The Internet forwards information through a mesh of routers and switches, which has to keep up with the increasing demands of traffic. Shared-memory based switches are known to provide the best throughput-delay performance for a given memory size. In this thesis performance of commonly used memory-sharing schemes for the shared memory switches are evaluated under balanced and unbalanced bursty traffic. The scalability of shared-memory switches has been a research issue for quite sometime. One approach is …

Biosensing With Microcantilever-Based Sensors, Xiaodong Yan

Doctoral Dissertations

Microcantilevers provide an ideal platform for biosensors. The micron-sized transducer brings several advantages, such as high sensitivity, small sample quantity for analysis, portability, implantable sensor devices, and the ability to be mass produced and integrated into standard microelectronic processing technologies like complementary metal oxide seminconductors (CMOS).

The objective of this research is to investigate and develop modification methods of microcanitlevers for biosensing applications.

Two microcantilever modification methods were investigated. They are self-assembly monolayer method and layer-by-layer method. A fundamental procedure for modification of microcantilevers using the layer-by-layer approach was developed for the first time in this research. These modification methods …

Rf Cmos Receiver Front-End Using A Reflex Amplifier, Radovan Kuzet

Theses and Dissertations - UTB/UTPA

A concept for an RF-CMOS receiver with reflex topology is developed and tested, using OrCad as the primary design and simulation tool. The main idea of the reflex topology is to reuse a Low Noise Amplifier (LNA) stage in the circuit and thus eliminate one high power consumption stage. A Gilbert cell is used for down conversion, with the benefit of low noise and low power while maintaining gain. A set of passive diplexers allows reuse of the LNA at the RF and IF. The complete circuit was simulated using 0.18 micron and 0.5 micron AMI technology. Parameters for the …

Kinetics Of Laser Chemical Vapor Deposition Of Carbon And Refractory Metals, Feng Gao

Doctoral Dissertations

Three-dimensional laser chemical vapor deposition (3D-LCVD) has been used to grow rods of carbon, tungsten, titanium, and hafnium from a variety of hydrocarbons and metal halide-based precursors. A novel computerized 3D-LCVD system was designed and successfully used in the experiments. A focused Nd:Yag laser beam (λ = 1.06 μm) was utilized to locally heat up a substrate to deposition temperature. The rods, which grew along the axis of the laser beam, had a typical diameter of 30–80 μm and a length of about 1 mm. The precursors for carbon deposition were the alkynes: propyne, butyne, pentyne, hexyne, and octyne. Propyne …

Efficient Algorithms And Implementations For Signal Processing, Changbai Xiao

Doctoral Dissertations

A scheme is presented to regain a finite number of lost samples from a Nyquist-rate-sampled band-limited signal f of finite energy by replenishing new sample values of the same number. The result can also be viewed as the solution to a special non-uniform sampling problem.

A scheme is also presented to recover a band-limited function f of finite energy from its sampling values on real sequences with an accumulation point. The result given here can also be viewed as an approach to the extrapolation problem of determination a band-limited function in terms of its given values on a finite interval. …

Bottom-Up Design Of Artificial Neural Network For Single-Lead Electrocardiogram Beat And Rhythm Classification, Srikanth Thiagarajan

Doctoral Dissertations

Performance improvement in computerized Electrocardiogram (ECG) classification is vital to improve reliability in this life-saving technology. The non-linearly overlapping nature of the ECG classification task prevents the statistical and the syntactic procedures from reaching the maximum performance. A new approach, a neural network-based classification scheme, has been implemented in clinical ECG problems with much success. The focus, however, has been on narrow clinical problem domains and the implementations lacked engineering precision. An optimal utilization of frequency information was missing. This dissertation attempts to improve the accuracy of neural network-based single-lead (lead-II) ECG beat and rhythm classification. A bottom-up approach defined …

The Optimized Electrostatic Motor, Christopher Lee Rambin

Doctoral Dissertations

The most common means of electrically activated actuation is the electromagnetic motor. All electromagnetic motors have a low output to weight ratio and low energy efficiency. The motor's weight is due to the coils and magnets used to generate propulsion. The energy loss is mainly the result of Joule heating that is inherent with any current driven device. An electrostatic motor offers the potential of significantly less weight and higher energy efficiency. This lower weight characteristic is due to the epoxide material used to construct the major components of its propulsion unit. Greater efficiency results from the reduced Joule heating …