Electrical and Computer Engineering Commons^™

Performance Comparison Of Phase Change Materials And Metal-Insulator Transition Materials For Direct Current And Radio Frequency Switching Applications, Protap Mahanta, Mohiuddin Munna, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Advanced understanding of the physics makes phase change materials (PCM) and metal-insulator transition (MIT) materials great candidates for direct current (DC) and radio frequency (RF) switching applications. In the literature, germanium telluride (GeTe), a PCM, and vanadium dioxide (VO₂), an MIT material have been widely investigated for DC and RF switching applications due to their remarkable contrast in their OFF/ON state resistivity values. In this review, innovations in design, fabrication, and characterization associated with these PCM and MIT material-based RF switches, have been highlighted and critically reviewed from the early stage to the most recent works. We initially …

Genetic Algorithm Amplifier Biasing System (Gaabs): Genetic Algorithm For Biasing On Differential Analog Amplifiers, Sean Whalen

Computer Engineering

Genetic Algorithm Amplifier Biasing System (GAABS) - Senior Project Analysis

Summary of Functional Requirements

This project integrates LTSpice with a python script that runs a genetic algorithm to bias a differential amplifier. The system biases the amplifier with 2 different voltages, the base voltage for the PNP BJTs of the active loads and a voltage controlling the current of the current sink. The project runs via a python script, gets data from LTSpice’s command line call, and iteratively runs until the system is biased to achieve the greatest gain on an arbitrary input voltage.

Primary Constraints

Some of the main …

Buturi Solar, Patrick Mihelic, Alfredo Muñoz, Ruben Tapia

Electrical and Computer Engineering Senior Theses

The village of Makongoro in the Buturi community of Tanzania lacks the resources to bring any form of energy to power the local school. The most reliable source of energy we could bring to the school is in the form of a photovoltaic system, as the climate of Buturi provides an ideal location for the implementation of such system. We have designed a solar microgrid specifically for Buturi and the needs of the school, that has the capability to power laptops, cell phones, and lighting throughout the school building. The system is fully detailed and explained in this report, with …

Brushless Direct Current Motor Control For Inspired Flight, Aidan James Mccoy

Computer Science and Software Engineering

Brushless direct current motors have become a very common part of many modern electronics. Although they are more expensive and less robust than conventional brushed direct current motors, they provide large advantages in control, power output, longevity as well as efficiency. To make these motors run, they need more than just power. Each motor needs a separate motor controller that is responsible for taking in a signal for what speed/torque to run the motor at, and then managing the current flow to the motor to keep it spinning while fitting within these boundaries. Brushless direct current motors have a set …

Data Mining Ancient Script Image Data Using Convolutional Neural Networks, Shruti Daggumati, Peter Revesz

School of Computing: Conference and Workshop Papers

The recent surge in ancient scripts has resulted in huge image libraries of ancient texts. Data mining of the collected images enables the study of the evolution of these ancient scripts. In particular, the origin of the Indus Valley script is highly debated. We use convolutional neural networks to test which Phoenician alphabet letters and Brahmi symbols are closest to the Indus Valley script symbols. Surprisingly, our analysis shows that overall the Phoenician alphabet is much closer than the Brahmi script to the Indus Valley script symbols.

Fpga-Based Dsp System, Aaron Nguyen

Computer Engineering

The purpose of this project is to create a modular FPGA-based filtering system for audio in VHDL. The final implementation has a working input, output, and filtering system but the filtering system still must be fine-tuned.

Analog Sorting Using Pulse Width Modulation, Riley C. Olson

Computer Engineering

As time goes on, computers become more and more powerful. However, as processing time becomes less of a limiting factor for computing tasks, power consumption takes its place for many tasks. This paper proposes and tests a new method for sorting analog signals. This new sorting method converts analog signals into Pulse Width Modulated(PWM) signals of varying duty cycle , which are then sorted by a simple network of combinational logic, and then converted to a normal binary representation. In order to implement this new method, multiple circuits had to be designed and and tested to ensure their functionality and …

Photovoltaic System Optimization For An Austere Location Using Time Series Data, Torrey J. Wagner, Eric Lang, Warren Assink, Douglas S. Dudis

Faculty Publications

In this work we test experimental photovoltaic, storage and generator technologies and investigate their potential to meet austere location energy needs. After defining the energy requirements and insolation of a 1,100-person base, we develop a microgrid model and simulation. Cost optimizations were then performed using hourly time-series data to explore the cost and performance trade-space of a PV-battery-generator system. The work highlights the cost of resiliency and the dependencies of optimum system component sizes on duration and the fully burdened cost of fuel.

Vehicle Pseudonym Association Attack Model, Pierson Yieh

Master's Theses

With recent advances in technology, Vehicular Ad-hoc Networks (VANETs) have grown in application. One of these areas of application is Vehicle Safety Communication (VSC) technology. VSC technology allows for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications that enhance vehicle safety and driving experience. However, these newly developing technologies bring with them a concern for the vehicular privacy of drivers. Vehicles already employ the use of pseudonyms, unique identifiers used with signal messages for a limited period of time, to prevent long term tracking. But can attackers still attack vehicular privacy even when vehicles employ a pseudonym change strategy? The major contribution …

Towards A Strawberry Harvest Prediction System Using Computer Vision And Pattern Recognition, Andreas M. Apitz

Master's Theses

Farmers require advance notice when a harvest is approaching, so they can allocate resources and hire workers as efficiently as possible. Existing methods are subjective and labor intensive, and require the expertise of a professional forecaster. Cal Poly’s EE department has been collaborating with the Cal Poly Strawberry Center to investigate the potential in using digital imaging processing to predict harvests more reliably. This paper shows the progress of that ongoing project, as well as what aspects could still be improved. Three main blocks comprise this system: data acquisition, which obtains and catalogues images of the strawberry plants; computer vision, …

Towards Autonomous Localization Of An Underwater Drone, Nathan Sfard

Master's Theses

Autonomous vehicle navigation is a complex and challenging task. Land and aerial vehicles often use highly accurate GPS sensors to localize themselves in their environments. These sensors are ineffective in underwater environments due to signal attenuation. Autonomous underwater vehicles utilize one or more of the following approaches for successful localization and navigation: inertial/dead-reckoning, acoustic signals, and geophysical data. This thesis examines autonomous localization in a simulated environment for an OpenROV Underwater Drone using a Kalman Filter. This filter performs state estimation for a dead reckoning system exhibiting an additive error in location measurements. We evaluate the accuracy of this Kalman …

Artificial Neural Network-Based Robotic Control, Justin Ng

Master's Theses

Artificial neural networks (ANNs) are highly-capable alternatives to traditional problem solving schemes due to their ability to solve non-linear systems with a nonalgorithmic approach. The applications of ANNs range from process control to pattern recognition and, with increasing importance, robotics. This paper demonstrates continuous control of a robot using the deep deterministic policy gradients (DDPG) algorithm, an actor-critic reinforcement learning strategy, originally conceived by Google DeepMind. After training, the robot performs controlled locomotion within an enclosed area. The paper also details the robot design process and explores the challenges of implementation in a real-time system.

Design, Simulation, And Hardware Construction Of A 600 W Solid State Dc Circuit Breaker For The Dc House Project, Calin Matthew Bukur

Master's Theses

DC circuit breakers must be able to arrest overcurrent conditions to prevent electrical equipment and wiring from causing building fires or other hazards from occurring. With more DC renewable sourced structures such as Cal Poly’s DC House, an inexpensive and reliable protection system is necessary to ensure safe energy transfer to the loads. One method of protecting a system is preventing excessive amounts of current to be drawn by the load when the surrounding components are rated at a lesser value. DC circuit breakers act as a monitoring system and barely presents an effect on the voltage or power. With …

Extended-Use Ecg Monitor, Daniel Aaron Soski

Master's Theses

In this thesis, a prototype ECG monitor was developed that is integrated into an elastic shirt and takes a 3-lead ECG for over 5 days. The high-quality measurements can be used to identify markers indicative of various detrimental heart conditions. Measurements recorded by the device are encrypted and stored onto a micro-SD card. Current Holter monitors are expensive and have functional lives less than 48 hours; however, extended duration monitoring has been proven more useful in diagnosis. The device designed demonstrates that ECG measurements can be taken over longer durations without sacrificing quality, comfort, or device cost.

The Analysis And Study Of Power System Designs For Same Polytechnic College In Tanzania, Kevin Lum Hua

Master's Theses

The Mbesese Initiative for Sustainable Development (MISD) is a group aiming to help eliminate extreme poverty in Africa by creating educational opportunity. One project that the group is currently doing is to build Same Polytechnic College (SPC) in Tanzania. As part of the project, this thesis aims to study and analyze the electrical power system and distribution for the college. Based on the projected load profile of the college and high potential for solar generation in Tanzania, several different power systems utilizing local utility AC electricity and/or photovoltaic (PV) DC electricity are explored and simulated for their feasibility and performance. …

The Modified-Multiphase Boost Converter: Combined Inductors And Capacitors Topology, Zachary L. Eldredge

Master's Theses

In this work, a modified boost converter design has been implemented in a multiphase configuration with a condensed topology. The modified aspect of the design has already been proven to drastically reduce input current ripple by about 40% in a single-phase implementation. By placing two modified boost converters in parallel with interleaving main switches (multiphase), the input inductors and modified capacitors of the modified topology can be reduced to just one of each, lowering the number of components, size, and cost. Additionally, multiphase DC/DC converters lower input/output voltage and current ripples while delivering more power compared to single-phase converters. By …

Logging And Analysis Of Internet Of Things (Iot) Device Network Traffic And Power Consumption, Ryan Joseph Frawley

Master's Theses

An increasing number of devices, from coffee makers to electric kettles, are becoming connected to the Internet. These are all a part of the Internet of Things, or IoT. Each device generates unique network traffic and power consumption patterns. Until now, there has not been a comprehensive set of data that captures these traffic and power patterns. This thesis documents how we collected 10 to 15 weeks of network traffic and power consumption data from 15 different IoT devices and provides an analysis of a subset of 6 devices. Devices including an Amazon Echo Dot, Google Home Mini, and Google …

Mechanism Of Virus Inactivation By Cold Atmospheric-Pressure Plasma And Plasma-Activated Water, Li Guo, Ruobing Xu, Lu Gou, Zhichao Liu, Yiming Zhao, Dingxin Liu, Lei Zhang, Hailan Chen, Michael G. Kong

Bioelectrics Publications

ABSTRACT Viruses cause serious pathogenic contamination that severely affects the environment and human health. Cold atmospheric-pressure plasma efficiently inactivates pathogenic bacteria; however, the mechanism of virus inactivation by plasma is not fully understood. In this study, surface plasma in argon mixed with 1% air and plasma-activated water was used to treat water containing bacteriophages. Both agents efficiently inactivated bacteriophages T4, ϕ174, and MS2 in a time-dependent manner. Prolonged storage had marginal effects on the antiviral activity of plasma-activated water. DNA and protein analysis revealed that the reactive species generated by plasma damaged both nucleic acids and proteins, consistent with the …

A Comparative Study Of Constant Power Operation Techniques For Low Inductance Machines, Damien Lawhorn, Narges Taran, Vandana Rallabandi, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

In traditional electric machines, it is usually possible to achieve constant power high-speed operation by employing field weakening through the injection of a negative d-axis current component. However, in machines with low armature inductance, such as high power density permanent magnet synchronous machines, and more specifically, coreless machines, which are gaining increasing attention because of their high specific torque, the extended speed range obtained using this method is very narrow. This paper summarizes the performance characteristics of existing approaches for obtaining constant power operation and proposes two new techniques, specially applicable to coreless axial flux permanent magnet machine namely, current …

Assessing Scrum Project Management And Teamwork In Electrical And Computer Engineering Courses, Branimir Pejcinovic, Robert B. Bass, Phillip Wong

Electrical and Computer Engineering Faculty Publications and Presentations

Teamwork and project management are essential skills for engineering students, as recognized in the proposed new ABET topic area 7. Our team of instructors exposes students to project management techniques at multiple levels within our undergraduate ECE program. By learning project management early and practicing it often, students improve their teamwork efficacy in projects, courses, and in their future careers. Scrum is a cyclical project management technique commonly used in high-tech industries. Scrum provides a framework that facilitates teamwork through an adaptable and incremental process. Our variant of scrum is tailored to students working on engineering projects in a higher-education …

"Dual Peaks" Analog Distortion Guitar Effects Pedal, Dave Raul Breuer

Computer Engineering

The Dual Peaks distortion pedal is an analog effects pedal for electric guitar that distorts and boosts the guitar signal in order to achieve tonal characteristics often heard in music genres such as blues, rock, hard rock, and metal. Dual Peaks aims to remedy the current distortion pedal design, and provide a new spin not often provided in the majority of pedals. Dual Peaks contains two separate distortion channels which provide the player with a vast array of distortion and overdrive tones at the press of a switch. Also, Dual Peaks has a "noise gate" and 3-band equalizer circuits built …

Multi-Physics Modeling For Electric And Hybrid Vehicles With In-Wheel Electric Motors, Vandana Rallabandi, Damien Lawhorn, Dan M. Ionel, Xiao Li

Power and Energy Institute of Kentucky Faculty Publications

This paper discusses multi-domain and multi-physics modeling of in-wheel electric vehicles using ANSYS Simplorer and ANSYS Maxwell. The study includes component level modeling of the vehicle, brakes, wheels, battery, traction motor, inverter, solar panels and boost converter. The traction motor used is an axial flux permanent magnet synchronous machine. In order to accommodate both the large time constants of the mechanical system and the high switching frequency power electronics, average models of the inverter and boost converter are considered. Simulation examples are provided for the University of Kentucky Gato Del Sol V car.

Collision Avoidance Smartphone, Matt Columbres, Aaron Parisi, Joey Schnecker, Luis Wong

Electrical Engineering

There are many instances in day-to-day life where people cannot or would rather not pay full attention to their surroundings. Walking while preoccupied with a smartphone or walking while blind are excellent examples where technology could be used to make the task of avoiding 2collisions reactive, instead of proactive. A device which monitors a user’s surroundings and notifies the user when a potential collision is detected (and, additionally, notifying them as to where the obstacle is with respect to them) could be used to make walking distracted less of a hazard for the user and those around the user and …

Dc House Solar Panel Cleaner, Sarahanne Heredia, Sophia Deguia

Electrical Engineering

Solar panels lose 0.05% of their power conversion efficiency per day due to soil accumulation, according to an experiment conducted by the University of California, San Diego in 2013 [18]. The project is an electro-mechanical cleaning system that effectively and efficiently cleans solar panels at set intervals. A drip irrigation system with spray jets was attached to a water pump and Arduino, both powered by the DC House Project solar panel battery. The DC House solar panel was the targeted panel set up for the project. Several components of the design could have been chosen more optimally for the system; …

Circuit Breaker Module, Garvin Yee, Yei Trinh

Electrical Engineering

The circuit breaker module for this design project is a proof of concept that demonstrates the functionality, feasibility, and attainability of a consumer grade power systems analysis device suitable for college laboratory use. The goal of this project was to create the final iteration of a module that has been developed and refined over the course of previous years. The Cal Poly Electrical Engineering Department intends to use this design to produce circuit breaker modules intended for fault analysis. With the current changes made to the previous modules, the current circuit breaker is lighter, safer, and more universally reproducible. The …

Beam Scanning Realized By Coupled Modes In A Single-Patch Antenna, Haozhan Tian, Kirti Dhwaj, Li (Lijun) Jun Jiang, Tatsuo Itoh

Electrical and Computer Engineering Faculty Research & Creative Works

In this letter, we introduce a novel beam scanning in a single-rectangular-patch antenna realized by coupled modes. The design exhibits radiated beams that scan as a function of frequency but is different in its operation mechanism compared to a traditional leaky-wave antenna. The idea is to manipulate the phase difference between the fields at two radiating slots of the antenna to reform the beam. Metal vias are introduced to create two coupled half-mode cavities in the patch antenna. The mutual coupling between the two cavities makes the phase difference as a function of the operating frequency. The simulated beam scans …

Versatile Usb Powered Turntable, Kyle P. Mccarry

Electrical Engineering

People enjoy vinyl music’s warm sound, user participation, and nostalgic feel, but the large physical size and seemingly immobile system requirements prevent vinyl turntables branching into digital music dominated realms. USB ports power many important everyday devices. A USB powered turntable increases record player adaptability, versatility, and portability thus expanding usable turntable scenarios. The manual turntable plays seven to twelve-inch vinyl at 33 1/3 or 45 rpm. It includes a stylus, magnetic phono cartridge, tonearm, 45-rpm adapter, motor, audio output, and several setting switches and knob for easy use.

Analysis Of Improved Multiphase Buck Converter, Usamah Riaz Ahmad, Scott Wu

Electrical Engineering

While the number of transistors per microprocessor is rapidly increasing, the power requirements of converters are getting more and more important. The amount of current is increasing, while at the same time the output voltage is steadily decreasing. Today’s boards are exceeding 100A, while the buck converters have their output voltage below 1 V. Due to these new power requirements, multiphase buck converters are becoming more popular. In addition, this topology is usually used with voltage regulator modules (VRM).

The TPS40090EVM-002 board was used as the original multiphase buck with an input voltage of 12 V and output voltage of …

Investigating Efficiency Of Ac Direct Drive Of Led Lighting, Miles Davis Head

Electrical Engineering

This project explores the rapidly-expanding area of AC direct drive for LED lighting. AC LED driving does not use typical DC-DC converter-based driving but uses semiconductor switches and a linear regulator to activate a number of LEDs proportional to the input voltage at any given time. This allows bulky, expensive magnetics to be eliminated from the system. The goal of this project was to develop a flexible simulation of a common AC LED system to find areas of significant power loss and attempt to improve them. This allows future versions of an AC LED system to start with major loss …

Ewall Inverter Project, Andrew Douglas Tsau, Alex Lopez

Electrical Engineering

The objective of this project is to demonstrate the capabilities of a Raspberry Pi when used as a grid-tied, bi-directional power inverter for renewable energy storage applications. Due to its economical nature, this system would play a large role in the growing solar industry by making solar energy more accessible, affordable, and easier to install. The inverter uses a single-phase H-Bridge to generate a sine wave from a proprietary wall mounted battery. To improve power quality, an enhanced low pass filter is added to provide a better drop off to reduce extraneous harmonics. The system synchronizes this synthetic sine wave …