Electrical and Computer Engineering Commons^™

Midfield Rf Signal Detector, Dawei Zhang

Electrical Engineering

This project is part of a Master’s thesis which looks at alternative ways to measure blood glucose. The Master’s thesis uses mid-field signals in order to match impedance and therefore lose less power as they travel through flesh. The goal of this senior project is to build a receiver for those signals and give accurate RSSI (received signal strength indicator) measurements. Mid-fields were originally explored by Stanford professor Dr. Ada Poon [3] who used the signaling technique to recharge the batteries of deeply implanted devices. Devices implanted near the surface of the skin were able to have their batteries recharged …

Dgtd Analysis Of Electromagnetic Scattering From Penetrable Conductive Objects With Ibc, Ping Li, Yifei Shi, Li (Lijun) Jun Jiang, Hakan Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

To avoid straightforward volumetric discretization, a discontinuous Galerkin time-domain (DGTD) method integrated with the impedance boundary condition (IBC) is presented in this paper to analyze the scattering from objects with finite conductivity. Two situations are considered. 1) The skin depth is smaller than the thickness of the conductive volume. 2) The skin depth is larger than the thickness of a thin conductive sheet. For the first situation, a surface impedance boundary condition (SIBC) is employed, wherein the surface impedance usually exhibits a complex relation with the frequency. To incorporate the SIBC into DGTD, the surface impedance is first approximated by …

Experimental Investigation Of Spatial-Mode-Selective Frequency Up-Conversion, Mohan Giribabu

Electrical Engineering Theses - Archive

We experimentally investigate the spatial-mode-selective frequency up-conversion by sum-frequency generation in a second-order medium. In particular, we are interested in zero and first order Gaussian modes. In our experiment, we generate pump and signal pulses of 400 ps duration, spatially modulate them, and couple them into a Periodically Poled Lithium Niobate (PPLN) waveguide. Only one signal mode selected by the pump’s spatial profile is up-converted. The up-converted signal is separated from the original signal and pump beams, modes are captured on a camera and efficiency of up-conversion is recorded. We also discuss some important phase-matching conditions for nonlinear interaction in …

Investigation Of Scalable Hevc And Its Bitrate Allocation For Uhd Deployment In The Context Of Http Streaming, Uma Sagar Madhugiri Dayananda

Electrical Engineering Theses - Archive

High Efficiency Video Coding (HEVC/H.265) [1] is the state of the art video compression standard, which provides bitrate reduction in the range of 50% when compared to the previous Advanced Video Coding (AVC/H.264) [5] standard at similar video quality. Scalable High Efficiency Video Coding (SHVC) [2] is the scalable extension of HEVC, which provides traditional scalability options in terms of quality, spatial resolution and temporal frame rate and newer scalability options as well. SHVC can be used to deliver Ultra High Definition (UHD) or 4K resolution video content to mix of clients having varying characteristics. The distribution of clients is …

A Training Assistant Tool For The Automated Visual Inspection System, Mohan Karthik Ramaraj

All Theses

This thesis considers the problem of assisting a human user setting up an automated Visual Inspection (VI) system. The VI system uses a stationary camera on an automobile assembly line to inspect cars as they pass by. The inspection process is intended to identify when parts have been missed or incorrect parts have been assembled. The result is reported to a human working on the assembly line who then can take corrective actions. As originally developed, the system requires a setup phase in which the human user places the camera and records a video of at least 30 minutes length …

Compression Of Climate Data Through Artificial Neural Networks, Astha Puri

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lately, there has been a tremendous increase in the number of climate monitoring

stations in various parts of the country producing abundant climate data. Among climate data parameters, humidity and temperature are the two parameters influencing hydrological and agricultural processes, weather monitoring, and having critical effect on living organisms. As more data is being generated over time, there is a strong need to develop compression methods for efficient transfer and storage of this data.

The main goal of this thesis is to perform compression of humidity and temperature

data via prediction. As these are critical components of climate, it is …

Design Of Digital Down Converter Chain For Software Defined Radio Systems On Fpga, Nagarjun Marappa

Masters Theses

Modern communication systems have increasingly attempted to trade off the digital signal processing for analog circuitry. In performing this tradeoff, advanced algorithms have been implemented in both custom programmable hardware and in software; such systems are commonly called Software Defined Radios (SDR). Advanced software defined radios consist of highly configurable hardware and computers used as digital signal processing (DSP) platforms that provide the technology for realizing current and future generations of digital wireless communication infrastructure. Many sophisticated signal processing tasks are performed in SDR, including compression algorithms, channel estimation, equalization, forward error correction and protocol management. This research has focused …

A Feed Forward Circuit For Jitter Attenuation On High-Speed Digital Signals, Eric Rule

Electrical Engineering

In the age of high-speed digital circuitry, there exists a need for clean, precise clock signals. In generating and distributing clock signals throughout a circuit, unwanted jitter can become a serious issue. A common technique for attenuating jitter uses phase-locked-loops to treat the signal, but as the clock frequency increases, so does the cost and complexity of the designs. Following the research completed by Dr. Tina Smilkstein [1], this project examines a purely feed-forward technique for attenuating jitter that is low-complexity and robust, and aims to design an integrated circuit that implements the technique.

A Small Acoustic Goniometer For General Purpose Research, Michael Pook

Boise State University Theses and Dissertations

Understanding acoustic events and monitoring their occurrence is a useful aspect of many research projects. In particular, acoustic goniometry allows researchers to determine the source of an event based solely on the sound it produces. The vast majority of the acoustic goniometry research projects used custom hardware targeted to the specific application under test. Unfortunately, due to the wide range of sensing applications, a flexible general purpose hardware/firmware system does not exist for this research. This dissertation focuses on the development of such a system which encourages the continued exploration of general purpose hardware/firmware and lowers barriers to research in …

Aircraft Detection And Tracking Using Uav-Mounted Vision System, Yan Zhang

Doctoral Dissertations and Master's Theses

For unmanned aerial vehicles (UAVs) to operate safely in the national airspace where non-collaborating flying objects, such as general aviation (GA) aircraft without automatic dependent surveillance-broadcast (ADS-B), exist, the UAVs' capability of “seeing" these objects is especially important. This “seeing", or sensing, can be implemented via various means, such as Radar or Lidar. Here we consider using cameras mounted on UAVs only, which has the advantage of light weight and low power. For the visual system to work well, it is required that the camera-based sensing capability should be at the level equal to or exceeding that of human pilots. …

Epitaxial Growth Of Si-Ge-Sn Alloys For Optoelectronic Device Application, Aboozar Mosleh

Graduate Theses and Dissertations

Microelectronics industry has experienced a tremendous change over the last few decades and has shown that Moore’s law has been followed by doubling the number of transistors on the chip every 18 months. However, continuous scaling down of the transistors size is reaching the physical limits and data transfer through metal interconnects will not be able to catch up with the increasing data processing speed in the future. Therefore, optical data transfer between chips and on-chip has been widely investigated. Silicon based optoelectronics has received phenomenal attention since Si has been the core material on which microelectronic industry has been …

Image Processing And Visualization Of Terahertz Pulsed Imaging Of Breast Cancer Tumors, Yuhao Wu

Graduate Theses and Dissertations

Terahertz imaging technology has grown substantially in recent years. With new advances made in the generation, manipulation, and detection of terahertz radiation, terahertz imaging has found its application as inspection tools in a wide range of areas including biomedicine, materials science, and aerospace industries. In the field of medical imaging, terahertz (THz) has emerged as a new imaging modality due to some fundamental physical properties of the THz wave. THz imaging has been used to examine various biological structures, and THz tomography has been developed to probe the 3D structures of those samples.

THz pulsed imaging (TPI) is one of …

Contribution To T He Onboard Context Sensitive Information System ( Of Commercial Aircraft, Wei Tan

Theses and Dissertations

Pilots currently use paper-based documentation and electronic systems (e.g., Electronic Centralized Aircraft Monitor (ECAM) for Airbus, and Engine Indication and Crew Alerting System (EICAS) for Boeing) to help them perform procedures to ensure safety, efficiency and comfort on commercial aircrafts. Management of interconnections among paper-based operational documents can be a challenge for pilots, especially when time pressure is high in normal, abnormal, and emergency situations. This dissertation is a contribution to the design of an Onboard Context-Sensitive Information System (OCSIS). The claim is that the use of contextual information facilitates access to appropriate operational content at the right time either …

Swat Model Simulation Of Bioenergy Crop Impacts On Water Quality In Cache River Watershed, Eeshan Kumar

Graduate Theses and Dissertations

Energy security through increased biofuel production is one of the components of the Energy Independence and Security Act (EISA) 2007. As per EISA 2007 mandate, appropriate independent research institutes are required to assess concerns to natural biodiversity due to biofuel production and report it to the Congress through the Environment Protection Agency (EPA). Planners, researchers, and agencies concerned with environmental regulations, ideally, would like to have location-specific information about the impacts for developing appropriate management interventions. This study examines long-term impacts on water quality in response to targeted (i.e. marginal lands) production of biofuel crops by setting up two SWAT …

Hvdc Systems Fault Analysis Using Various Signal Processing Techniques, Benish Paily

Doctoral

The detection and fast clearance of faults are important for the safe and optimal operation of HVDC systems. In HVDC systems, various types of AC faults (rectifier & inverter side) and DC faults can occur. It is therefore necessary to detect the faults and classify them for better protection and diagnostics purposes. Various techniques for fault detection and classification in HVDC systems using signal processing techniques are presented and investigated in this research work. In this research work, it is shown that the wavelet transformation can effectively detect abrupt changes in system signals which are indicative of a fault. This …

Automatic License Plate Recognition Using Deep Learning Techniques, Naga Surya Sandeep Angara

Electrical Engineering Theses

Automatic License Plate Recognition (ALPR) systems capture a vehicles license plate and recognize the license number and other required information from the captured image. ALPR systems have number of significant applications: law enforcement, public safety agencies, toll gate systems, etc. The goal of these systems is to recognize the characters and state on the license plate with high accuracy. ALPR has been implemented using various techniques. Traditional recognition methods use handcrafted features for obtaining features from the image. Unlike conventional methods, deep learning techniques automatically select features and are one of the game changing technologies in the field of computer …

Virtual Electronics Laboratory For Visualized Education And Training, Sreelatha Aihloor Subramanyam

Electrical Engineering Theses

On-line education is utilized extensively and has been found to be effective in a multitude of subject areas, including engineering education. However, for on-line education to be fully effective in engineering education, a means must be developed to provide on-line students with laboratory experiences that achieve the same learning outcomes as face-to-face laboratories. To address this need, a pilot computer program, Project VELVET (Virtual Electronics Laboratory for Visualized Education and Training), for a virtual electronics laboratory is being developed. VELVET operates on Windows-based computers in a real-time environment. It presents to its user a virtual breadboard into which components may …

Control Of Cation Ordering In Zinc Tin Nitride And In-Situ Monitoring Of Growth, Brian Christopher Durant

Masters Theses

Semiconducting materials with a band gap around 1.5 eV are very much sought after due to their close match to the solar spectrum. However, some compounds that have shown promise for highly efficient solar cells contain rare, expensive, and sometimes toxic elements, such as indium and gallium. As such, a search for earth abundant materials has become more prominent recently. One such earth abundant semiconducting material that has garnered interest is ZnSnN₂. It has been shown through previous studies that there is the possibility of continuously tuning the band gap between 1.0 and 2.0 eV by controlling the …

Industrial Energy Consumption, Benchmarking, And Analysis In The United States, Daniel Maldonado

Mechanical Engineering Undergraduate Honors Theses

The purpose of this paper is to analyze the energy consumption of the industrial sector in the United States, and to identify the tools that can be used to minimize the consumption and improve the energy efficiency of all facilities in the country. The first part of the paper is a historical analysis of the industrial sector energy consumption, where the different energy sources are identified. The second part details different electronic tools that will provide facilities the ability of performing benchmarking, in order to understand their energy performance. Finally, the third part of this paper provides information about the …

Morphology Based Framework For Improved Driver's Visibility In Inclement Weather Conditions, Saleem Farhood Hussein

Masters Theses

The U.S. Department of Transportation reports that on average there are 5,870,000 vehicle accidents each year. Twenty-three percent (23%) of these accidents are attributed to weather conditions with an annual average of more than 6,000 people are killed and 480,000 people are injured. Weather-related accidents occur mainly because of the low visibility on the roads under inclement conditions such as snow, rain and fog. While these conditions can be predictable and individuals try to avoid driving in inclement weather, there are circumstances that require driving in such conditions such as emergency responders or when the severity of the storm has …

Rubidium Packaging For On-Chip Spectroscopy, Cameron Louis Hill

Theses and Dissertations

This thesis presents rubidium packaging methods for integration using anti-resonant reflecting optical waveguides (ARROWs) on a planar chip. The atomic vapor ARROW confines light through rubidium vapor, increases the light-vapor interaction length, decreases the size of the atomic cell to chip scales, and opens up possibilities for waveguide systems on chips for additional optoelectronic devices. Rubidium vapor packaging for long-life times are essential for realizing feasibly useful devices. Considerations of outgassing, leaking and chemical compatibilities of materials in rubidium vapor cells lead to an all-metal design. The effect of these characteristics on the rubidium D2 line spectra is considered.

Fast Random Walk Based Capacitance Extraction For The 3-D Ic Structures With Cylindrical Inter-Tier-Vias, Chao Zhang, Wenjian Yu, Qing Wang, Yiyu Shi

Electrical and Computer Engineering Faculty Research & Creative Works

3-D integrated circuits (3-D ICs) make use of the vertical dimension for smaller footprint, higher speed, lower power consumption, and better timing performance. In 3-D ICs, the inter-Tier-via (ITV) is a critical enabling technique because it forms vertical signal and power paths. Accordingly, it is imperative to accurately and efficiently extract the electrostatic capacitances of ITVs using field solvers. Unfortunately, the cylindrical via shape presents major challenges to most of the existing methods. To address this issue, we develop a novel floating random walk (FRW) method by rotating the transition cube to suit the cylindrical surface, devising a special space …

An Overview On Optimized Nlms Algorithms For Acoustic Echo Cancellation, Constantin Paleologu, Silviu Ciochină, Jacob Benesty, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

Acoustic echo cancellation represents one of the most challenging system identification problems. The most used adaptive filter in this application is the popular normalized least mean square (NLMS) algorithm, which has to address the classical compromise between fast convergence/tracking and low mis adjustment. In order to meet these conflicting requirements, the step-size of this algorithm needs to be controlled. Inspired by the pioneering work of Prof. E. Hänsler and his collaborators on this fundamental topic, we present in this paper several solutions to control the adaptation of the NLMS adaptive filter. The developed algorithms are "non-parametric" in nature, i.e., they …

A Low Complexity Reweighted Proportionate Affine Projection Algorithm With Memory And Row Action Projection, Jianming Liu, Steven L. Grant, Jacob Benesty

Electrical and Computer Engineering Faculty Research & Creative Works

A new reweighted proportionate affine projection algorithm (RPAPA) with memory and row action projection (MRAP) is proposed in this paper. The reweighted PAPA is derived from a family of sparseness measures, which demonstrate performance similar to mu-law and the l0 norm PAPA but with lower computational complexity. The sparseness of the channel is taken into account to improve the performance for dispersive system identification. Meanwhile, the memory of the filter's coefficients is combined with row action projections (RAP) to significantly reduce computational complexity. Simulation results demonstrate that the proposed RPAPA MRAP algorithm outperforms both the affine projection algorithm (APA) and …

A Handcrafted Multi-Branch Nerve Scaffold For In Vivo Peripheral Nerve Regeneration, Ridwan Fayaz Hossain

Theses and Dissertations

Arm and leg peripheral nerve injuries contribute largely to functional disability. These injuries seldom affect a single-line nerve; rather the injury goes beyond and disrupts the nerve tissue across multiple nerve paths. Here we investigate handcrafted PDMS based multi-branch nerve guidance conduit, which addresses this crucial branching from the sciatic nerve to aid with the regeneration to their appropriate distal targets. The design concept of the developed multiple branch nerve scaffolds is not specific for the sciatic nerve but can be modified for general use of all peripheral nerves and additional applications. Microchannels are also fabricated into a device in …

Solar Powered Picnic Table For Charging Cellphones And Other Small Devices, Casey B. Potts

Electronic Theses and Dissertations

Solar panels are used in many different applications for generating sustainable energy. Many countries use solar power as a power generation method. It is also, an excellent option for getting power to difficult areas. There are three main systems used when generating solar power: grid-tied, battery banked, and direct driven systems. Most systems use a combination of grid-tied and battery banked so any unused power can be fed back into the main grid for compensation. The solar power application suggested in this thesis will provide USB power to a picnic table enabling students to charge cellphones and other small devices …

Detection And Recovery From Camera Bump During Automated Inspection Of Automobiles On An Assembly Line, Shawn Mathew

All Theses

This thesis details the steps taken to detect and compensate for camera bumps while per- forming part identification using VI at the BMW manufacturing plant and on the simulation testbed. For the system presented here to work, the user is required to record a video from the camera before the camera is bumped and one after the camera has been bumped. The premise behind the method suggested here is that the transformation between the background in the pre- and post-bump video will be equal to the transformation in the foreground. A Background extraction program is used to generate a background …

Force Transducer For Inventory Management, Trever Hoye, Austin Adee

Electrical Engineering

Inventory management for small parts such as electronic components remains time consuming and costly to implement, yet required for efficient business operations. Currently there exists no solution to this problem that is both automated and inexpensive. This project provides a solution by developing an accurate and wireless force transducer for automated inventory management systems. The device works by laying on the bottom of an inventory storage container and measuring the total weight of the items. The device then wirelessly transmits this weight to a receiver where it is stored in a database. Afterwards, the database compares the most recent weight …

Platform For Environmental Sensing Of Algae, Alex Wu

Electrical Engineering

No abstract provided.

Medical Image Registration Using Artificial Neural Network, Hyunjong Choi

Master's Theses

Image registration is the transformation of different sets of images into one coordinate system in order to align and overlay multiple images. Image registration is used in many fields such as medical imaging, remote sensing, and computer vision. It is very important in medical research, where multiple images are acquired from different sensors at various points in time. This allows doctors to monitor the effects of treatments on patients in a certain region of interest over time. In this thesis, artificial neural networks with curvelet keypoints are used to estimate the parameters of registration. Simulations show that the curvelet keypoints …