Electrical and Computer Engineering Commons^™

A Quantitative Study Of Mobility Impact For Real- Time Services On A Wi-Fi Multi-Hop Network, Ting Zhou, Hamid Sharif, Michael Hempel, Puttipong Mahasukhon, Wei Wang, Song Ci

Department of Electrical and Computer Engineering: Faculty Publications

In this paper, we analyze the performance of mobile real time services in a large-scale IEEE 802.11 multi-hop network. We present our field measurements with discussion of performance bottlenecks for VoIP services under mobile scenarios. We utilized our test bed which is located in Nebraska and supported by the University of Nebraska-Lincoln (UNL), US Federal Railroads Administrations (FRA), and major US railroad companies. Our UNL-FRA test bed consists of 8 outdoor access point towers, which are deployed along 3.5 mile of BNSF railroad. Passive measurement approaches are taken to ensure the integrity of collected data and multi-layer stream based packet …

Full-Wave Finite-Difference Time-Domain Simulation Of Electromagnetic Cloaking Structures, Yan Zhao, Christos Argyropoulos, Yang Hao

Department of Electrical and Computer Engineering: Faculty Publications

This paper proposes a radial dependent dispersive finitedifference time-domain method for the modeling of electromagnetic cloaking structures. The permittivity and permeability of the cloak are mapped to the Drude dispersion model and taken into account in dispersive FDTD simulations. Numerical simulations demonstrate that under ideal conditions, objects placed inside the cloak are ‘invisible’ to external electromagnetic fields. However for the simplified cloak based on linear transformations, the back scattering has a similar level to the case of a PEC cylinder without any cloak, rendering the object still being ‘visible’. It is also demonstrated numerically that the simplified cloak based on …

Gene Expression Analysis Of Embryonic Stem Cells Expressing Ve-Cadherin (Cd144) During Endothelial Differentiation, Vesna Nikolova-Krstevski, Manoj Bhasin, Hasan H. Otu, Towia A. Libermann, Peter Oettgen

Department of Electrical and Computer Engineering: Faculty Publications

Background: Endothelial differentiation occurs during normal vascular development in the developing embryo. This process is recapitulated in the adult when endothelial progenitor cells are generated in the bone marrow and can contribute to vascular repair or angiogenesis at sites of vascular injury or ischemia. The molecular mechanisms of endothelial differentiation remain incompletely understood. Novel approaches are needed to identify the factors that regulate endothelial differentiation.

Methods: Mouse embryonic stem (ES) cells were used to further define the molecular mechanisms of endothelial differentiation. By flow cytometry a population of VEGF-R2 positive cells was identified as early as 2.5 days after differentiation …

Aspects Of Producing, Directing, Conditioning, Impinging And Detecting Spectroscopic Electromagnetic Radiation From Small Spots On Samples, Martin M. Liphardt, Ping He, Blaine D. Johs, Galen L. Pfeiffers, James D. Welch, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Sytems and mehtods for providing and enhancing electromagnetic radiation beam radail energy homogeneity and intensity vs. wavelength content, for reliably directing electromagnetic radiation emitted by a source thereof in a common direction, for achromatically reducing spot size on a sample (eg. liquid cavity containing lenses and low aberration 1:1 imaging systems modified to perform as spatial filters), and for directing directing different wavelengths into different detectors, in ellipsometer, polarizer or the like systems.

System And Method Ofselectively Monitoring Sample Front And Backside Reflections In Ellipsometer And The Like Systems, James D. Welch, John A. Woollam, Martin M Liphardt

Department of Electrical and Computer Engineering: Faculty Publications

A spectrophotometer, reflectometer, ellipsometer polarimeter or the like system having a detector means for independently intercepting electromagnetic radiation reflected from a sample frontside or backside, and methodology for pursuing less correlated determination of refractive index and thickness values.

Average Min-Sum Decoding Of Ldpc Codes, Nathan Axvig, Deanna Dreher, Katherine Morrison, Eric T. Psota, Lance C. Pérez, Judy L. Walker

Department of Mathematics: Faculty Publications

Simulations have shown that the outputs of minsum (MS) decoding generally behave in one of two ways: the output either eventually stabilizes at a codeword or eventually cycles through a finite set of vectors that may include both codewords and non-codewords. This inconsistency in MS across iterations has significantly contributed to the difficulty in studying the performance of this decoder. To overcome this problem, a new decoder, average min-sum (AMS), is proposed; this decoder outputs the average of the min-sum output vectors over a finite set of iterations. Simulations comparing MS, AMS, linear programming (LP) decoding, and maximum likelihood (ML) …

Development Of Fiber Bend Loss Edge Filter, Pengfei Wang

Doctoral

This PhD thesis addresses several aspects of macrobending loss in single-mode optical fibers. The context for the work is the development of an edge filter for a rapid wavelength measurement system. Based on scalar approximation theory and the beam propagation method, a simulation platform is developed and used to predict the macrobending loss of singlemode fiber with single or multiple coating layers. A single-mode step index fiber macrobending loss edge filter is investigated theoretically in terms of baseline loss, discrimination range and polarization dependent loss (PDL). The theoretical analysis is supported by a range of experimental investigations and results. The …

A Macro-Bend Fiber Based Wavelength Demodulation System For Optical Fiber Sensing Applications, Ginu Rajan

Doctoral

This thesis considers the design and development of a wide range allfiber interrogation system with a rapid measurement capability for extracting reliable measurand information from fiber Bragg grating sensors. Existing passive and active interrogation systems have certain limitations and do not satisfy all requirements. In this thesis a wavelength demodulation system is proposed, based on a macro-bend fiber filter employed in a ratiometric detection scheme. A theoretical model and analysis of an edge filter based ratiometric wavelength measurement (RWM) system is presented. A fiber edge filter is realized by carefully selecting an appropriate bend radius and number of bend turns …

Investigation Of Millimetre Wave Generation By Stimulated Brillouin Scattering For Radio Over Fibre Applications, Markus Junker

Doctoral

The rising demand for greater bandwidth and increased flexibility in modern telecommunication systems has lead to increased research activities in the field of Millimetre Wave-Photonics. The combination of an optical access network and the radio propagation of high data-rate signals provides a solution to meet these demands. Such structures are also known as Radio Over Fibre Systems. They implement the optical Millimetre Wave generation in a central station and the transmission of radio waves via a remote antenna unit to the radio cell. The expected data rate is very high, due to the fact that both the optical and the …

Unified Power Quality Conditioner: Protection And Performance Enhancement, Iurie Axente

Doctoral

The proliferation of power electronics-based equipment has produced a significant impact on the quality of electric power supply. Nowadays, much of the equipment is based on power electronic devices, often leading to problems of power quality. At the same time this equipment is typically equipped with microprocessor-based controllers which are quite sensitive to deviations from the ideal sinusoidal line voltage. Conventional power quality mitigation equipment is proving to be inadequate for an increasing number of applications, and this fact has attracted the attention of power engineers to develop dynamic and adjustable solutions to power quality problems. One modern and very …

Drop Photometer Design., Kevin Tiernan

Doctoral

The tensiograph drop analyser, operating in the mode of ultraviolet-visual absorption photometer, was re-engineered to improve measurement accuracy. As well as instrumentation re-design, the other objective of the research was to analyse tensiograph signals to explore how their features are defined by drop properties. Using fibre optic technology, the tensiograph emits a light beam into a growing pendant drop whereupon it undergoes a number of internal reflections. A portion of the reflected light energy is coupled to a photodiode producing a proportional current that is electronically processed and transferred to a computer for analysis. The signal produced, known as the …

Antennas For Portable Communications In The Uwb And Gps Spectra., Giuseppe Ruvio

Doctoral

The thesis describes a study of antennas for solutions in emerging systems. An account of the fundamental principles of these antennas is given together with an outline of the basic electromagnetic theory on which the designs are based. While the main focus is on antennas for Ultra Wideband (UWB) systems, some additional work was carried out on enhancing performance of circularly polarised antennas for satellite navigation systems. The study focussed on the design of highly efficient broadband antennas with particular requirements for size compactness, gain stability, phase-linearity, and the use of low-cost materials. These requirements are particularly important for UWB …

Modular Fast Direct Analysis Using Non-Radiating Local-Global Solution Modes, Xin Xu

University of Kentucky Doctoral Dissertations

This dissertation proposes a modular fast direct (MFD) analysis method for a class of problems involving a large fixed platform region and a smaller, variable design region. A modular solution algorithm is obtained by first decomposing the problem geometry into platform and design regions. The two regions are effectively detached from one another using basic equivalence concepts. Equivalence principles allow the total system model to be constructed in terms of independent interaction modules associated with the platform and design regions. These modules include interactions with the equivalent surface that bounds the design region. This dissertation discusses how to analyze (fill …

Towards A Metric For The Assessment Of Safety Critical Control Systems, Oscar R. Gonzalez, Jorge R. Chavez-Fuentes, W. Steven Gray

Electrical & Computer Engineering Faculty Publications

There is a need for better integration of the fault tolerant and the control designs for safety critical systems such as aircraft. The dependability of current designs is assessed primarily with measures of the interconnection of fault tolerant components: the reliability function and the mean time to failure. These measures do not directly take into account the interaction of the fault tolerant components with the dynamics of the aircraft. In this paper, a first step to better integrate these designs is made. It is based on the observation that unstable systems are intrinsically unreliable and that a necessary condition for …

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

The Target Complex loop TC-1 was originally conceived as part of an accelerator-driven system (ADS) pilot plant that was designed and developed by the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization (EDO) “Gidropress” in Obninsk, Russia, under the International Science and Technology Center Project #559 in 1998. It was to be used as the target in a 1 MWth ADS experiment run off of the LANSCE proton accelerator at Los Alamos National Laboratory (LANL). When the U.S. transmutation program changed priorities from accelerator-driven systems towards nuclear fission reactors, the TC-1 loop was brought to UNLV …

A Mobile Ecg Monitoring System With Context Collection, Jin Peng Li

Masters

An objective of a health process is one where patients can stay healthy with the support of expert medical advice when they need it, at any location and any time. An associated aim would be the development of a system which places increased emphasis on preventative measures as a first point of contact with the patient. This research is a step along the road towards this type of preventative healthcare for cardiac patients. It seeks to develop a smart mobile ECG monitoring system that requests and records context information about what is happening around the subject when an arrhythmia event …

A Comparison Of Filtering Approaches For Aircraft Engine Health Estimation, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

Different approaches for the estimation of the states of linear dynamic systems are commonly used, the most common being the Kalman filter. For nonlinear systems, variants of the Kalman filter are used. Some of these variants include the LKF (linearized Kalman filter), the EKF (extended Kalman filter), and the UKF (unscented Kalman filter). With the LKF and EKF, performance varies depending on how often Jacobians (partial derivative matrices) are updated. In other words, we see a tradeoff between computational effort and filtering performance. With the unscented Kalman filter, Jacobians are not calculated but computational effort is typically high due to …

Low Noise, High Repetition Rate Semiconductor-Based Mode-Locked Lasers For Signal Processing And Coherent Communications, Franklyn Quinlan

Electronic Theses and Dissertations

This dissertation details work on high repetition rate semiconductor mode-locked lasers. The qualities of stable pulse trains and stable optical frequency content are the focus of the work performed. First, applications of such lasers are reviewed with particular attention to applications only realizable with laser performance such as presented in this dissertation. Sources of timing jitter are also reviewed, as are techniques by which the timing jitter of a 10 GHz optical pulse train may be measured. Experimental results begin with an exploration of the consequences on the timing and amplitude jitter of the phase noise of an RF source …

Ultrashort Laser Pulse Interaction With Photo-Thermo-Refractive Glass, Leo Siiman

Electronic Theses and Dissertations

Photo-thermo-refractive (PTR) glass is an ideal photosensitive material for recording phase volume holograms. It is a homogeneous multi-component silicate glass that demonstrates all the advantages of optical glass: thermal stability, high laser damage threshold, and a wide transparency range. Moreover the ability to record phase patterns (i.e. spatial refractive index variations) into PTR glass has resulted in the fabrication of volume holograms with diffraction efficiency greater than 99%. The conventional method of recording a hologram in PTR glass relies on exposure to continuous-wave ultraviolet laser radiation. In this dissertation the interaction between infrared ultrashort laser pulses and PTR glass is …

Cholesteric Liquid Crystal Photonic Crystal Lasers And Photonic Devices, Ying Zhou

Electronic Theses and Dissertations

This dissertation discusses cholesteric liquid crystals (CLCs) and polymers based photonic devices including one-dimensional (1D) photonic crystal lasers and broadband circular polarizers. CLCs showing unique self-organized chiral structures have been widely used in bistable displays, flexible displays, and reflectors. However, the photonic band gap they exhibit opens a new way for generating laser light at the photonic band edge (PBE) or inside the band gap. When doped with an emissive laser dye, cholesteric liquid crystals provide distributed feedback so that mirrorless lasing is hence possible. Due to the limited surface anchoring, the thickness of gain medium and feedback length is …

Integrated Optical Spr (Surface Plasmon Resonance) Sensor Based On Optoelectronic Platform, Hyungseok Bang

Electronic Theses and Dissertations

Current major demands in SPR sensor development are system miniaturization and throughput improvement. Structuring an array of integrated optical SPR sensor heads on a semiconductor based optoelectronic platform could be a promising solution for those issues, since integrated optical waveguides have highly miniaturized dimension and the optoelectronic platform enables on-chip optical-to-electrical signal conversion. Utilizing a semiconductor based platform to achieve optoelectronic functionality poses requirements to the senor head; the sensor head needs to have reasonably small size while it should have reasonable sensitivity and fabrication tolerance. This research proposes a novel type of SPR sensor head and demonstrates a fabricated …

Extended Focus Range High Resolution Endoscopic Optical Coherence Tomography, Kye-Sung Lee

Electronic Theses and Dissertations

Today, medical imaging is playing an important role in medicine as it provides the techniques and processes used to create images of the human body or parts thereof for clinical purposes (medical procedures seeking to reveal, diagnose or examine disease) or medical science (including the study of normal anatomy and function). Modalities are developing over time to achieve the highest possible resolution, speed of image acquisition, sensitivity, and specificity. In the past decade, advances in optics, fiber, as well as laser technology have enabled the development of noninvasive optical biomedical imaging technology that can also be applied to endoscopy to …

Fabrication And Characterization Of Room Temperature Operating Single Electron Transistors Using Focused Ion Beam Technologies, Prasanjit Santosh Karre

Dissertations, Master's Theses and Master's Reports - Open

The single electron transistor (SET) is a Coulomb blockade device, whose operation is based on the controlled manipulation of individual electrons. Single electron transistors show immense potential to be used in future ultra lowpower devices, high density memory and also in high precision electrometry. Most SET devices operate at cryogenic temperatures, because the charging energy is much smaller than the thermal oscillations. The room temperature operation of these devices is possible with sub- 10nm nano-islands due to the inverse dependance of charging energy on the radius of the conducting nano-island. The fabrication of sub-10nm features with existing lithographic techniques is …

Electrical And Computer Engineering Research Report 2008, Department Of Electrical And Computer Engineering, Michigan Technological University

Department of Electrical and Computer Engineering Annual Reports

• Department
• Research
• New Chair
• Publications
• Enterprise

System And Ic Level Analysis Of Electrostatic Discharge (Esd) And Electrical Fast Transient (Eft) Immunity And Associated Coupling Mechanisms, Jayong Koo

Doctoral Dissertations

"The exposure of electronic circuits to lightning, electrostatic discharge (ESD), electrical fast transients (EFT) or sine wave signals can reveal RF immunity problems. Typical problems include temporary malfunctions or permanent damage of integrated circuits (ICs). In an effort to reproduce those disturbances, a series of electromagnetic compatibility standards has been developed. However, a complete understanding of the root cause of the immunity problems has yet to be established. This dissertation discusses immunity problems in three papers, starting at the system level, via the coupling path into the IC"--Abstract, page iv.

Energy Efficient Wireless Sensor Network Protocols For Monitoring And Prognostics Of Large Scale Systems, James W. Fonda

Doctoral Dissertations

"In this work, energy-efficient protocols for wireless sensor networks (WSN) with applications to prognostics are investigated. Both analytical methods and verification are shown for the proposed methods via either hardware experiments or simulation. This work is presented in five papers. Energy-efficiency methods for WSN include distributed algorithms for i) optimal routing, ii) adaptive scheduling, iii) adaptive transmission power and data-rate control"--Abstract, page iv.

Multiple-Input Multiple-Output Wireless Communications With Imperfect Channel Knowledge, Christopher Potter

Doctoral Dissertations

"In the first work a recurrent neural network (RNN) is employed for MIMO channel prediction. A novel PSO-EA-DEPSO off-line training algorithm is presented and is shown to outperform PSO, PSO-EA, and DEPSO. This predictor is shown to be robust to varying channel scenarios. New expressions for the received SNR, array gain, average probability of error, and diversity gain are derived. Next, a new expression for the outage capacity of a MIMO system with no CSI at the transmitter and an estimate at the receiver is presented. Since the outage capacity is a function of the first and second moments of …

Inter-Area Oscillation Damping In Large Scale Power Systems With Unified Power Flow Controllers, Mahyar Zarghami

Doctoral Dissertations

"Power system oscillations occur in power networks as a result of contingencies such as faults or sudden changes in load or generation. They are detrimental to the operation of the system since they affect system stability and the optimal power flow through it. These oscillations do not usually damp out in tie-lines unless certain controls are applied to the system. Local and inter-area oscillations have traditionally been controlled by Power System Stabilizers (PSS). However, Flexible Alternating Current Transmission Controllers (FACTS) have significant potential as alternatives to PSS. The main goal of this research is to damp inter-area oscillations by Unified …

Quiescent Current Testing Of Cmos Data Converters, Siva Yellampalli

LSU Doctoral Dissertations

Power supply quiescent current (IDDQ) testing has been very effective in VLSI circuits designed in CMOS processes detecting physical defects such as open and shorts and bridging defects. However, in sub-micron VLSI circuits, IDDQ is masked by the increased subthreshold (leakage) current of MOSFETs affecting the efficiency of I¬DDQ testing. In this work, an attempt has been made to perform robust IDDQ testing in presence of increased leakage current by suitably modifying some of the test methods normally used in industry. Digital CMOS integrated circuits have been tested successfully using IDDQ and IDDQ methods for physical defects. However, testing of …

Statistics Of Local Speckle Contrast, Donald D. Duncan, Sean J. Kirkpatrick, Ruikang K. Wang

Electrical and Computer Engineering Faculty Publications and Presentations

In describing the first-order properties of laser speckle under polarized illumination conditions, it is almost an article of faith that the contrast is unity. In many processing schemes, however, the contrast defined as the quotient of the standard deviation and the mean is calculated over a localized spatial region. In such cases, this local contrast displays a distribution of values that can depart substantially from unity. Properties of this distribution depend on details of the data acquisition and on the size of the local neighborhood over which the contrast is calculated. We demonstrate that this local contrast can be characterized …