Electrical and Computer Engineering Commons^™

Implementation Profile: Modeling Environment (Doe-Psu-0000922-3), Sean Keene, Midrar Adham, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This implementation profile provides the scope, background, and requirements necessary to implement a Modeling Environment (ME) to test a Distributed Energy Resource (DER) Management System (DERMS). A DERMS is used by an aggregator to dispatch large numbers of DERs in order to provide grid services to a Grid Operator. The ME addresses scalability issues inherent to Hardware-in-the-Loop DERMS simulation; a large number of assets are needed in order to observe effects on the grid from deployment and dispatch of DERs.

Product Specification: Distributed Control Module (Doe-Psu-0000922-5), Nicole Henderson, Kai Zeng, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This product specification describes the architecture, implementation, and hardware descriptions of a Distributed Control Module (DCM) prototype. A DCM is an enabling technology for distributed energy resources (DER). DERs are grid-enabled generation, storage, and load devices that are owned by utility customers. DCMs enable information exchange between a distributed energy resource management system (DERMS) and DERs for the purpose of networking large numbers of DERs. The DCM prototype described within this document enables DER participation in a service-oriented aggregation system. A DERMS server provides IEEE 2030.5 smart energy resource services to DCM clients using a request/response information exchange process. DCMs …

Energy Services Interface (Doe-Psu-0000922-1), Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This document defines a set of rules known as the Energy Services Interface (ESI), which “establish a bi-directional, service-oriented, logical interface to support secure, trustworthy information exchange between an aggregator and distributed energy resources (DERs). These exchanges facilitate energy interactions between the DERs and the aggregator, thereby allowing the aggregator to provide grid services through dispatch of the DERs.” The ESI serves as an umbrella, ensuring the information exchange between an aggregator and DER owners conforms to expectations: protect privacy, provide security, develop trustworthiness, and ensure interoperability. DERMS developers use the ESI to ensure that information exchange meets these expectations.

Psu Derms Operating Manual And Egot System Reference (Doe-Psu-0000922-7), Tylor Slay, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This document guides the user of the Portland State University Distributed Energy Resource Management System in configuration and normal operation. For direct access to the underlying code and its usage see the accompanying PSU EGoT System Reference. The system reference outlines all classes and methods used through the Energy Grid of Things system including applications, models, interfaces and the entity component system.

Effect Of Water Vapor Desorption On The Performance Of Gallium Nitride Field Emitter Array, Ranajoy Bhattacharya, Pao-Chuan Shih, Tomás Palacios, Jim Browning

Electrical and Computer Engineering Faculty Publications and Presentations

We are exploring the potential of gallium nitride (GaN) field emitter arrays in vacuum channel transistors. This study investigated the impact of ultraviolet (UV) light on the emission properties of large arrays of GaN field emitters. Arrays of 150 × 150 emitters were analyzed before and after UV exposure. With a constant collector voltage of 200 V DC, gate voltage sweeps from 0 to 60 V were applied. The initial I–V measurements showed a rapid increase in emission current, indicating a conditioning effect, settling at a stable value of 1.25 μA after three to five sweeps. Remarkably, exposure to …

Moisture-Controlled Triboelectrification During Coffee Grinding, Joshua Méndez Harper, Yong-Hyun Kim, Robin E. Bumbaugh, Connor S. Mcdonald, Christopher H. Hendon, Elana J. Cope, Leif E. Lindberg, Justin Pham, Multiple Additional Authors

Electrical and Computer Engineering Faculty Publications and Presentations

Triboelectrification is the physical process where materials acquire surface charge from frictional interactions at their interfaces.The magnitude of charge depends on the interfacial material composition and can be harnessed in emergent technologies for energy generation.

The mechanism of electrostatic accumulation is complex and is further obscured in granular materials where collisions are sufficiently energetic to cause fracturing. In this “fractoelectric” regime, crack initiation and propagation are thought to charge particles through transfer of electrons and/or ions at the hot crack interface.

Whether a material’s charging is dominated by tribo- or fractoelectrification, fracture-generated granular flows often comprise particles whose surface charge …

Psu Esi Review (Doe-Psu-0000922-6), Tylor Slay, Jaime Kolln, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

A guide to developing an Energy Service Interface (ESI) was created as part of the Grid Modernization Laboratory Consortium 2.5.2 ESI project. The approach applies device-agnostic and service-oriented ESI principles and leverages documents such as the Interoperability Maturity Model and Common Grid Service Definitions to provide a methodology to review, develop, and update standards and profiles to engage distributed energy resources to provide grid services. This document evaluates the ESI developed by Portland State University’s Power Engineering Group under the Electric Grid of Things project funded by the U.S. Department of Energy. The evaluation explores the compliance of this specific …

Trust Model Utilization For Energy Grid Communication, N. Sonali Fernando, John M. Acken, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

The internet information that is used by the Energy Grid of Things requires both preventative security measures as well as surveillance measures. The preventative security measures include certificates, encryption, and all of the basic security protocols as defined by published standards. The surveillance measures include monitoring information flow activities and evaluating these messages for indications of potential security attacks. We describe in this paper the utilization of a Distributed Trust Model that was developed specifically for monitoring communication within an Energy Grid of Things. The goal for the Distributed Trust Models is to provide a level of aggregate trust that …

A Magnetic Constant Torque Mechanism, Gozde Sivka, Dawei Che, Bert Dechant, Colton Bruce, Jonathan Z. Bird

Electrical and Computer Engineering Faculty Publications and Presentations

This paper presents the design of a new type of magnetic constant torque mechanism. The constant torque is shown to be created over a prescribed ±65° stroke length and is shown to be highly uniform. The value of the constant torque is adjustable through the relative axial motion of the rotors. The constant torque is created using a simple magnet arrangement which makes use of the axial transverse-flux path of one rotor's magnetic field relative to the azimuthal field flow of the fixed secondary rotor. It is shown that the use of segmented magnets introduces torque ripple.

Mud Acoustics, Charles W. Holland, Stan E. Dosso, Jason D. Chaytor

Electrical and Computer Engineering Faculty Publications and Presentations

Imaging the ocean requires an understanding of how different seafloor sediments interact with sound waves.

A Transverse-Flux Constant Force Mechanism, Gozde Sivka, Bertrand Dechant, Colton Bruce, Jonathan Z. Bird

Electrical and Computer Engineering Faculty Publications and Presentations

A new type of constant force magnet mechanism is presented that relies on the interaction of magnets alone to create a constant force over a prescribed stroke length. It is demonstrated that by using a transverse field path a very uniform radial field along the travel length is created. This can then be used to create a constant force over a long stroke length. The constat force value is shown to be adjustable through the rotation of the stator relative to the translator. The operating principle of the presented transverse-flux constant force mechanism is validated by using 3-D finite element …

Simulation Modelling Of Silicon Gated Field Emitter Based Electronic Circuits, Robert Hay, Ranajoy Bhattacharya, Winston Chern, Girish Rughoobur, Akintunde I. Akinwande, Jim Browning

Electrical and Computer Engineering Faculty Publications and Presentations

Vacuum transistors (VTs) are promising candidates in electronics due to their fast response and ability to function in harsh environments. In this study, several oscillator and logic gate circuit simulations using VTs are demonstrated. Silicon-gated field emitter arrays (Si-GFEAs) with 1000 × 1000 arrays were used experimentally to create a VT model. First, transfer and output characteristics sweeps were measured, and based on those data, an LTspice vacuum transistor (VT) model was developed. Then, the model was used to develop Wein and Ring oscillator circuits. The circuits were analytically simulated using LTspice, where the collector bias voltage was 200 V …

Quantum Algorithms For Unate And Binate Covering Problems With Application To Finite State Machine Minimization, Abdirahman Alasow, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

Covering problems find applications in many areas of computer science and engineering, such that numerous combinatorial problems can be formulated as covering problems. Combinatorial optimization problems are generally NPhard problems that require an extensive search to find the optimal solution. Exploiting the benefits of quantum computing, we present a quantum oracle design for covering problems, taking advantage of Grover’s search algorithm to achieve quadratic speedup. This paper also discusses applications of the quantum counter in unate covering problems and binate covering problems with some important practical applications, such as finding prime implicants of a Boolean function, implication graphs, and minimization …

Material And Physical Reservoir Computing For Beyond Cmos Electronics: Quo Vadis?, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Traditional computing is based on an engineering approach that imposes logical states and a computational model upon a physical substrate. Physical or material computing, on the other hand, harnesses and exploits the inherent, naturally-occurring properties of a physical substrate to perform a computation. To do so, reservoir computing is often used as a computing paradigm. In this review and position paper, we take stock of where the field currently stands, delineate opportunities and challenges for future research, and outline steps on how to get material reservoir to the next level. The findings are relevant for beyond CMOS and beyond von …

Chemical Strategies To Mitigate Electrostatic Charging During Coffee Grinding, Joshua Méndez Harper, Christopher H. Hendon

Electrical and Computer Engineering Faculty Publications and Presentations

The process of grinding coffee generates particles with high levels of electrostatic charge, causing a number of detrimental effects including clumping, particle dispersal, and spark discharge. At the brewing level, electrostatic aggregation between particles affects liquid-solid accessibility, leading to variable extraction quality. In this study, we quantify the effectiveness of four charge mitigation strategies. Our data suggests that adding small amounts of water to whole beans pre-grinding, or bombarding the grounds with ions produced from a high-voltage ionizer, are capable of de-electrifying the granular flows. While these techniques helped reduce visible mess, only the static reduction through water inclusion was …

Effect Of Ultraviolet Light On Field Emission Performance And Lifetime Of Lateral Field Emitter Devices, Ranajoy Bhattacharya, Marco Turchetti, Matthew Yeung, P. Donald Keathley, Karl K. Berggren, Jim Browning

Electrical and Computer Engineering Faculty Publications and Presentations

Lateral field emission devices have been characterized before and after ultraviolet (UV) light exposure. Two types of planar device structures, diode and bowtie, were studied. These nanoscale devices have 9–15 nm tip-to-tip (bowtie) or tip-to-collector (diode) dimensions with the tips fabricated from Au/Ti. Typical currents of 2–5 nA per tip at 6 V were measured. It was observed that after UV exposure, the collected current was reduced by > 28% for the case of a bowtie device; whereas the current was reduced by > 39% for the case of a diode device. This reduction can be attributed to water vapor desorption on …

Quantitative Gait And Balance Outcomes For Ataxia Trials: Consensus Recommendations By The Ataxia Global Initiative Working Group On Digital-Motor Biomarkers, Winfried Ilg, Sarah Milne, Tanja Schmitz-Hübsch, Lisa Alcock, Lukas Beichert, Enrico Bertini, Helen Dawes, Christopher M. Gomez, James Mcnames, Multiple Additional Authors

Electrical and Computer Engineering Faculty Publications and Presentations

With disease-modifying drugs on the horizon for degenerative ataxias, ecologically valid, finely granulated, digital health measures are highly warranted to augment clinical and patient-reported outcome measures. Gait and balance disturbances most often present as the first signs of degenerative cerebellar ataxia and are the most reported disabling features in disease progression. Thus, digital gait and balance measures constitute promising and relevant performance outcomes for clinical trials.

This narrative review with embedded consensus will describe evidence for the sensitivity of digital gait and balance measures for evaluating ataxia severity and progression, propose a consensus protocol for establishing gait and balance metrics …

Generation Of Dna Oligomers With Similar Chemical Kinetics Via In-Silico Optimization, Michael Tobiason, Bernard Yurke, William L. Hughes

Electrical and Computer Engineering Faculty Publications and Presentations

Networks of interacting DNA oligomers are useful for applications such as biomarker detection, targeted drug delivery, information storage, and photonic information processing. However, differences in the chemical kinetics of hybridization reactions, referred to as kinetic dispersion, can be problematic for some applications. Here, it is found that limiting unnecessary stretches of Watson-Crick base pairing, referred to as unnecessary duplexes, can yield exceptionally low kinetic dispersions. Hybridization kinetics can be affected by unnecessary intra-oligomer duplexes containing only 2 base-pairs, and such duplexes explain up to 94% of previously reported kinetic dispersion. As a general design rule, it is recommended that unnecessary …

Depth And Frequency Dependence Of Geoacoustic Properties On The New England Mud Patch From Reflection Coefficient Inversion, Jiang Yong-Min, Charles W. Holland, Stan E. Dosso, Jan Dettmer

Electrical and Computer Engineering Faculty Publications and Presentations

Muddy sediments cover significant portions of continental shelves, but their physical properties remain poorly understood compared to sandy sediments. This paper presents a generally applicable model for sediment-column structure and variability on the New England Mud Patch (NEMP), based on trans-dimensional Bayesian inversion of wide-angle, broadband reflection-coefficient data in this work and in two previously published reflection-coefficient inversions at different sites on the NEMP. The data considered here include higher frequencies and larger bandwidth and cover lower reflection grazing angles than the previous studies, hence, resulting in geoacoustic profiles with significantly better structural resolution and smaller uncertainties. The general sediment-column …

Optimally Distributed Receiver Placements Versus An Environmentally Aware Source: New England Shelf Break Acoustics Signals And Noise Experiment, William K. Stevens, Martin Siderius, Matthew J. Carrier, Drew Wendeborn

Electrical and Computer Engineering Faculty Publications and Presentations

This article describes the results of the Spring of 2021 New England Shelf Break Acoustics (NESBA) Signals and Noise experiment as they pertain to the optimization of a field of passive receivers versus an environmentally aware source with end-state goals. A discrete optimization has been designed and used to demonstrate providing an acoustic system operator with actionable guidance relating to optimally distributed receiver locations and depths and likely mean source detection times and associated uncertainties as a function of source and receiver levels of environmental awareness. The uncertainties considered here are those due to the imperfect spatial and temporal sensing …

Modeling And Validating Temporal Rules With Semantic Petri Net For Digital Twins, Han Liu, Xiaoyu Song, Ge Gao, Hehua Zhang, Yu-Shen Liu, Ming Gu

Electrical and Computer Engineering Faculty Publications and Presentations

Semantic rule checking on RDFS/OWL data has been widely used in the construction industry. At present, semantic rule checking is mainly performed on static models. There are still challenges in integrating temporal models and semantic models for combined rule checking. In this paper, Semantic Petri-Net (SPN) is proposed as a novel temporal modeling and validating method, which implements the states and transitions of the Colored Petri-Net directly based on RDFS and SPARQL, and realizes two-way sharing of knowledge between domain semantic webs and temporal models in the runtime. Several cases are provided to demonstrate the possible applications in digital twins …

Distributed Deep Learning Optimization Of Heat Equation Inverse Problem Solvers, Zhuowei Wang, Le Yang, Haoran Lin, Genping Zhao, Zixuan Liu, Xiaoyu Song

Electrical and Computer Engineering Faculty Publications and Presentations

The inversion problem of partial differential equation plays a crucial role in cyber-physical systems applications. This paper presents a novel deep learning optimization approach to constructing a solver of heat equation inversion. To improve the computational efficiency in large-scale industrial applications, data and model parallelisms are incorporated on a platform of multiple GPUs. The advanced Ring-AllReduce architecture is harnessed to achieve an acceleration ratio of 3.46. Then a new multi-GPUs distributed optimization method GradReduce is proposed based on Ring-AllReduce architecture. This method optimizes the original data communication mechanism based on mechanical time and frequency by introducing the gradient transmission scheme …

Lift Force Analysis For An Electrodynamic Wheel Maglev Vehicle, Colton W. Bruce, Jonathan Bird, Matthew K. Grubbs

Electrical and Computer Engineering Faculty Publications and Presentations

This paper used an analytic based 3-D second order vector potential model to study the vertical dynamic force ripple and dynamic airgap height change when using a one pole-pair electrodynamic wheel (EDW) maglev vehicle. A one-pole pair EDW creates the lowest lift specific power; however transient finite element analysis (FEA) also shows that the one pole-pair EDW will create a large oscillating vertical force when maintaining a static airgap height. A dynamically coupled eddy current model was used to confirm that when the airgap length is allowed to change with time then an increase in vertical airgap creates a large …

Residual Vulnerabilities To Power Side Channel Attacks Of Lightweight Ciphers Cryptography Competition Finalists, Aurelien Mozipo, John M. Acken

Electrical and Computer Engineering Faculty Publications and Presentations

The protection of communications between Internet of Things (IoT) devices is of great concern because the information exchanged contains vital sensitive data. Malicious agents seek to exploit those data to extract secret information about the owners or the system. Power side channel attacks are of great concern on these devices because their power consumption unintentionally leaks information correlatable to the device's secret data. Several studies have demonstrated the effectiveness of authenticated encryption with advanced data, in protecting communications with these devices. A comprehensive evaluation of the seven (out of 10) algorithm finalists of the National Institute of Standards and Technology …

An Examination Of The Stiffness Terms Needed To Model The Dynamics Of An Eddy Current Based Maglev Vehicle, Colton W. Bruce, Jonathan Bird

Electrical and Computer Engineering Faculty Publications and Presentations

This paper re-examines the basis for each eddy current stiffness term computed from prior published steady-state eddy current models. The paper corrects prior analysis work by confirming, through the use of 2-D and 3-D dynamic finite element analysis modelling, that when a magnetic source is moving over an infinite-wide and infinite-long conductive sheet guideway the steady-state lateral and translational stiffness terms will be zero and only the vertical coupled stiffness terms need to be modelled. Using these observations, a much simplified 6 degrees-of-freedom (DoF) linearized eddy current dynamic force model can be used to compute the steady-state force changes in …

Investigation Of Degradation Of Solar Photovoltaics: A Review Of Aging Factors, Impacts, And Future Directions Toward Sustainable Energy Management, Eklas Hossain

Electrical and Computer Engineering Faculty Publications and Presentations

The degradation of solar photovoltaic (PV) modules is caused by a number of factors that have an impact on their effectiveness, performance, and lifetime. One of the reasons contributing to the decline in solar PV performance is the aging issue. This study comprehensively examines the effects and difficulties associated with aging and degradation in solar PV applications. In light of this, this article examines and analyzes many aging factors, including temperature, humidity, dust, discoloration, cracks, and delamination. Additionally, the effects of aging factors on solar PV performance, including the lifetime, efficiency, material degradation, overheating, and mismatching, are critically investigated. Furthermore, …

A Novel Deep Learning, Camera, And Sensorbased System For Enforcing Hand Hygiene Compliance In Healthcare Facilities, Samyak Shrimali, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Hospital-acquired infections are a major cause of death worldwide, and poor hand hygiene compliance is a primary reason for their spread. This paper proposes an artificial intelligence, microcontroller, and sensor-based system that monitors and improves staff hand hygiene compliance at various critical points in a hospital. The system uses a Convolutional Neural Network (CNN) to detect and track if staff have followed the WHO hand rub/hand wash guidelines at alcohol dispensers, hospital sinks, and patient beds. The system also uses RFID tags, vibration motors, LEDs, and a central server to identify staff, alert them of their cleaning requirements, monitor their …

The Networked Nitrous Node: A Low-Power Field-Deployable Cots-Based N2o Gas Sensor Platform, Ronaldo Leon, Wenyu Bi, Eyal Eynis, Travis Johnson, Wei Yan, David C. Burnett, John M. Acken

Electrical and Computer Engineering Faculty Publications and Presentations

We present a wireless nitrous oxide (N 2 O) gas sensor system consisting of a commercial high-current infrared N 2 O sensor wrapped in a “smart” sensor framework to make it suitable for battery-powered deployment. This framework consists of wireless mesh networking, data storage, additional environmental sensors, and a gas sensor power control circuit managed by a central microcontroller. The N 2 O sensor is the first order consumer of power and sampling N 2 O at approximately ten minute intervals yields an estimated system lifetime of 63 days when using four 18650 Li-ion batteries. The node stores data locally …

A Pwm Method For Reducing Dv/Dt And Switching Losses In Two-Stage Power Converters, Mahima Gupta, Abhijeet Prem

Electrical and Computer Engineering Faculty Publications and Presentations

Today's semiconductor devices are accompanied by high switching frequencies (> kilo-hertz) and small transition times (< micro-seconds). Such fast transition times are accompanied by undesirable effects such as voltage overshoots at the load terminals, ground leakage currents, wide-band electromagnetic noise, etc. With the advent of wide band-gap devices, several applications are moving towards higher switching frequency operation with at-least an order of magnitude reduction in transition times. While these characteristics are considered necessary to break the next-generation barriers in power density, efficiency and applicability, the undesirable effects due to faster transitions are expected to present obstacles. This work proposes a PWM approach to modify the shape of the switching voltages to overcome the disadvantages of the fast transition times without any increase in switching losses. In fact, several of the switching transitions feature ZVS operation, resulting in reduced switching losses. The paper discusses the analytical details of the approach using a simple DC-DC boost-buck converter and extends it to a DC to three-phase AC converter using the principles of space vector modulation. The paper presents detailed simulation and comparative results in terms of voltage over-shoots over long cables, loss calculations and electromagnetic noise. Results from a laboratory-scale working prototype confirm the benefits of the proposed approach in terms of EMI and loss reduction.

When Less Is More: How Increasing The Complexity Of Machine Learning Strategies For Geothermal Energy Assessments May Not Lead Toward Better Estimates, Stanley P. Mordensky, John Lipor, Jacob Deangelo, Erick R. Burns, Cary R. Lindsey

Electrical and Computer Engineering Faculty Publications and Presentations

Previous moderate- and high-temperature geothermal resource assessments of the western United States utilized data-driven methods and expert decisions to estimate resource favorability. Although expert decisions can add confidence to the modeling process by ensuring reasonable models are employed, expert decisions also introduce human and, thereby, model bias. This bias can present a source of error that reduces the predictive performance of the models and confidence in the resulting resource estimates.

Our study aims to develop robust data-driven methods with the goals of reducing bias and improving predictive ability. We present and compare nine favorability maps for geothermal resources in the …