Electrical and Computer Engineering Commons^™

Resource/Dataflow Graph Operating System Development, Sriram J. Coimbatore

Electrical & Computer Engineering Theses & Dissertations

Implementation of a new dataflow schedule model is the objective of this thesis. The dataflow model algorithm called the resource/dataflow graph model is implemented on a peer-to-peer communication network comprising of six personal computers. This dataflow model is implemented making use of an earlier dataflow model called ATAMM (Algorithm to Architecture Mapping Model) developed by ODU and National Aeronautics and Space Administration (NASA). Development issues include modification of the RDFG testbed operating system and a scheme to transfer data buffers using the ethernet channel from one processor to another processor. This, in turn, equips each sub-module of an application with …

Real-Time Visual Speech Articulation Training Aid, Neiyer S. Correal

Electrical & Computer Engineering Theses & Dissertations

A real-time visual articulation training aid has been implemented. It provides instantaneous visual feedback of vowel and stop-consonant production on a computer screen. The vowel training system corresponds to an improved floating-point implementation of a previous fixed-point system developed by Beck (1992). The new implementation provides better accuracy and an approximate five-fold increase in speed. Acoustic features computed from global short-time spectral shape are used for classification of vowels. Temporal spectral trajectories timed to begin with burst onset are used for stop consonants. A neural network is used to transform measurements of auditory stimuli from the feature space to a …

Monte Carlo Simulations Of Photoemission Characteristics From Gaas And Diamond, Abhishek Srivastava

Electrical & Computer Engineering Theses & Dissertations

Monte Carlo based numerical simulations were performed to study photoemission from GaAs and diamond. The central goal was to assess the potential for NEA photoemission from diamond, and to predict its characteristics. The GaAs material system was also included in the simulation study to provide: (i) calibration and validation of the numerical model developed by carefully matching the simulation results with available experimental data, and (ii) quantitative comparisons between the response characteristics of diamond and the better known GaAs system.

Predictions of the energy distribution, temporal response and angular distribution of emitted electrons were obtained. Effects of various parameters, such …

Two-Dimensional Drift-Diffusion Simulations Of Silicon Avalanche Shaper (Sas) Devices For High Power Applications, Hamid Jalali

Electrical & Computer Engineering Theses & Dissertations

Silicon Avalanche Shaper devices have been projected as being important components of an inexpensive, semiconductor-based technology for high power switching applications. The primary advantage of this technology is that it is based on Silicon material which is easy to fabricate and has a well established processing technology. Unlike other high power technologies, the SAS devices do not rely on external optical triggering which eliminates the need for lasers and related optical circuitry.

The SAS based high power switching technology has been pioneered and tested by a Russian group. Though preliminary results have been very encouraging, the device reliability and its …

Neural Generalized Predictive Control For Real-Time Control, Donald I. Soloway

Electrical & Computer Engineering Theses & Dissertations

In this thesis a computationally efficient Generalized Predictive Control (GPC) algorithm is presented and implemented. The algorithm is more efficient than others because the number of iterations needed for convergence is significantly lower with Newton-Raphson. The main additional cost with Newton-Raphson algorithm is the calculation of the Hessian. This overhead is not a problem because of the reduced number of iterations, making the algorithm suitable for real-time control. For nonlinear control applications, a neural network is used as a dynamical system predictor leading to a Neural Generalized Predictive Control (NGPC) algorithm which is presented in detail in this thesis. An …

Visual Speech Recognition Using Multiple Deformable Lip Models, Devi Chandramohan

Electrical & Computer Engineering Theses & Dissertations

Motivated by the fact that human speech perception is a bimodal process (auditory and visual), several researchers have designed and implemented automatic speech recognition (ASR) systems consisting of both audio and visual subsystems, and shown improved performance relative to traditional purely auditory systems. Several visual speech reading approaches have used deformable templates to model the shape of a speaker's lips. Deformable templates are models of image objects, which can be deformed by adjusting a set of parameters to match the object in some optimal way, as defined by a cost function. Using a single deformable lip model has disadvantages such …

Speech Feature Computation For Visual Speech Articulation Training, Stefan Auberg

Electrical & Computer Engineering Theses & Dissertations

A new version of the Visual Speech Articulation Training Aid was implemented which provides real-time visual feedback for speech articulation training. This version was migrated to a Windows Multimedia PC from a previous version which used a Personal Computer (PC) system and additional specialized and expensive custom hardware. This new version will make the system more available to schools and private users. A new method was developed for computing spectral/temporal features which characterize the speech sounds. In addition to the typical frame-based spectral analysis parameters, the new method represents temporal changes of the spectrum with a small number of features. …

Electron Beam Emission From A Ferroelectric Cathode, Crystal Briana Garland

Electrical & Computer Engineering Theses & Dissertations

The electron beam emission from a LTZ-2 (lead titanate-zirconate) ferroelectric cathode was characterized. The purpose was to determine the operation range for this type of electron emitter. The experimental apparatus consisted of a high voltage driving circuit with a charging voltage up to 30kV. A solid-state SCR switch is used to generate the high voltage pulse which induces a polarization change. Current densities on the order of 80A/cm² 30kV were achieved. The electron beam profile is Guassian. At long anode-cathode distances the measured current densities were found to be above Child-Langmuir space charge limits. The large current densities and …

Variable Step Size Lms Adaptive Filters With Delayed Coefficient Updating, Guixian Xu

Electrical & Computer Engineering Theses & Dissertations

A new approach to delayed LMS adaptive filtering is presented, which uses a variable step size for coefficient updating to increase convergence speed and improve tracking characteristics. The new algorithm, called delayed variable step size LMS (DVLMS), is explained, analyzed, and simulated to experimentally determine performance characteristics. Three different strategies for adjusting the step size are examined, and their performance is compared. Also, simulation results are presented to show that the proposed DVLMS systems provide faster convergence and lower mis-adjustment than previously proposed DLMS systems.

Adaptive Integration Of Audio And Visual Information Using Discrete And Semi-Continuous Hidden Markov Models In Audiovisual Automatic Speech Recognition, Qin Su

Electrical & Computer Engineering Theses & Dissertations

An audiovisual semi-continuous hidden Markov model (HMM)-based Automatic Speech Recognition (ASR) system and an improved method of integrating audio and visual information in an audiovisual discrete HMM-based ASR system are investigated.

In the audiovisual discrete HMM, an adaptive integration formulation is employed, which incorporates the integration into the HMM at a pre-categorical stage. A visual weighting parameter is determined automatically, which allows the relative contribution of audio and visual information to be adjusted adaptively. Using an adaptive weight, the accuracy increased by 13% compared to the same model with no adaptive weight.

The semi-continuous HMM is a class of models …

An Enhanced Signal Processing Strategy For Fetal Heart Rate Detection, Charles Brewton

Electrical & Computer Engineering Theses & Dissertations

The goal of the research was to improve the signal processing strategy for an acoustic fetal heart rate monitor. The theory, implementation, and testing of several possible signal processing strategies for fetal heart rate detection are presented. The enhanced signal processing strategy implemented is discussed and justified with off-line Matlab simulations and real-time experiments. A FIR matched filter was used as a preprocessor to increase the SNR of the acoustic fetal heart signal. The Teager energy operator and autocorrelation, used in the previous version of the monitor, were combined with a matched filter. Linear prediction and quadratic energy detection were …

Wavelength Modulation Spectroscopy With Diode Lasers, Ying Lu

Electrical & Computer Engineering Theses & Dissertations

Wavelength Modulation Spectroscopy is a non-intrusive technique which enables several parameters such as concentration, velocity, and temperature of a target specie to be measured. The method involves a modulation of a probe laser beam and detection at the fundamental, or any harmonic frequency, by a phase-sensitive apparatus. The theory of wavelength modulation is discussed. Effects of the finite value of the wavelength modulation index, together with the effects of any residual amplitude modulation that often occurs simultaneously in a diode laser, are included. It is shown that there are several advantages in using detection harmonics orders greater than the second. …

Frequency Response Enhancement Of A Flow Sensor Using Diamond Thin Films Synthesized By Plasma Cvd, John Curren Hagwood

Electrical & Computer Engineering Theses & Dissertations

Theoretical modeling conducted previously in our Microelectronics Laboratory has shown that a layer of diamond film inserted between a metal film and a substrate will enhance the frequency response of a conventional thin film flow sensor. This thesis involved fabricating and testing a conventional thin film sensor of nickel on quartz (Ni/Q) and a diamond enhanced sensor (Ni/D/Q) for comparative frequency response analysis to validate the theory. Diamond films were grown onto quartz substrates using a microwave plasma enhanced chemical vapor deposition process. Conditions were established to synthesize continuous diamond films on quartz substrates. These films were characterized by scanning …

Optical Fiber Fourier Transform Infrared Evanescent Wave Absorption Spectroscopy Of Aluminum Hydroxide And Natural Corrosion, Juock S. Namkung

Electrical & Computer Engineering Theses & Dissertations

A new technique for continuous, real-time, in-situ detection of natural corrosion of aluminum alloys is presented. The technique is a generalized version of attenuated total reflectance (ATR) spectroscopy, that combines optical fibers and a Michelson interferometer spectrometer to make evanescent wave absorption measurements. Aluminum hydroxide is one of the major corrosion products of aluminum. Absorption spectra of powdered samples of aluminum corrosion, in the spectral region around three micrometers have been studied and compared with the spectra from pure powdered aluminum hydroxide. A chalcogenide optical fiber was used as an attenuated total reflectance (ATR) optical element. The same samples were …

Modelling An Optical Fiber Bragg Grating, Claudio Oliveira Egalon

Electrical & Computer Engineering Theses & Dissertations

A theoretical investigation of a single mode optical fiber with one and two superimposed Bragg grating is presented. The formulation relies in the determination of an approximate solution in the asymptotic region of one of the fiber parameters. A correction is then applied to the asymptotic solution using the Method of the Successive Approximations also known as the Piccard Method. The approximation was then compared to the numerical solution using the Runge-Kutta method. Assuming that each Bragg grating has modulation frequencies given by Ω₁ and Ω₂, it has been found that the second Bragg grating shifts the …

Text Independent Speaker Verification Using Binary-Pair Partitioned Neural Networks, Claude A. Norton Iii

Electrical & Computer Engineering Theses & Dissertations

A method is presented for the application of binary-pair partitioned neural networks to the task of speaker verification. This technique is based on a previously developed neural network classifier for speaker identification.

The main focus of this research was the development and testing of the algorithms necessary to extend the binary-pair partitioning approach from speaker identification to speaker verification. The method is based on the development of a user profile which is obtained from discriminative data provided by the binary-pair partitioned neural networks.

Experimental results are provided which demonstrate the viability of this approach, using the TIMIT speech corpus for …

Fault Tolerant Pipelined Adaptive Systems, Bhasker Reddy Allam

Electrical & Computer Engineering Theses & Dissertations

A fault tolerant pipelined architecture for high sampling rate adaptive filters is presented in this thesis. The architecture is based on the computational requirements of delayed LMS and lattice adaptive 61ters. It offers robust performance in the presence of single hardware faults, and software faults resulting from numerical instability. Two different architectures are proposed. One allows a graceful degradation in system performance in the event of a fault, and the other uses a module replacement strategy to recover from faults without decreasing performance. Analysis of the steady state error increase due to filter reconfiguration is presented. The reliability of the …

Comparison Of System Identification Techniques For The Dexterous Orbital Servicing System (Doss), Allan Terrence Morris

Electrical & Computer Engineering Theses & Dissertations

The major contribution of system identification is the development of analytical models of a system. Many identification techniques can adequately describe the input and output map. One of the challenges of these techniques is to correctly infer from the measured data the characteristics of the individual, contributing components producing a more accurate system model.

In this thesis linear, dynamic, multivariable state-space models for three joints of the Dexterous Orbital Servicing System (DOSS) are identified. DOSS is a representative space station manipulator at the NASA Langley Research Center. The dynamic models of the manipulator will first be estimated by applying nonparametric …

Fetal Heart Rate Detection With A Passive Acoustic Sensor System, Zongyao Zhou

Electrical & Computer Engineering Theses & Dissertations

Research and development is presented of real time signal processing methodologies for the detection of fetal heart tones from noise contaminated signals obtained from passive acoustic sensors. A nonlinear Teager energy operator is utilized for detection of the fetal heart tone event. Autocorrelation and a parallel redundancy correction algorithm derives fetal heart rates. A real time monitoring system is described which records and plots the time history of both the fetal heart rate and the acoustic fetal heart signal. The system is validated in the context of the fetal nonstress test. Comparisons are made with ultrasonic nonstress tests on a …

An Investigation Of The Speed And Power Limitations Of A Copper-Doped Gallium Arsenide Photoconductive Switch, David Clifton Stoudt

Electrical & Computer Engineering Theses & Dissertations

The processes of persistent photoconductivity followed by photo-quenching are demonstrated in copper-compensated, silicon-doped, semi-insulating gallium arsenide. These processes allow a switch to be developed that can be closed by the application of one laser pulse (λ = 1.06 μm) and opened by the application of a second laser pulse with a wavelength equal to twice that of the first laser (λ= 2.13 μm). Switch closure is primarily achieved by elevating electrons from a deep copper center which has been diffused into the material. The opening phase is a two-step process which relies initially on the absorption of the 2-μm laser …

Compensation And Characterization Of Gallium Arsenide, Randy A. Roush

Electrical & Computer Engineering Theses & Dissertations

The properties of transition metals in gallium arsenide have been previously investigated extensively with respect to activation energies, but little effort has been made to correlate processing parameters with electronic characteristics. Diffusion of copper in gallium arsenide is of technological importance due to the development of GaAs:Cu bistable photoconductive devices. Several techniques are demonstrated in this work to develop and characterize compensated gallium arsenide wafers. The material is created by the thermal diffusion of copper into silicon-doped GaAs. Transition metals generally form deep and shallow acceptors in GaAs, and therefore compensation is possible by material processing such that the shallow …

The Current Voltage Characteristics Of Electron Beam Controlled Thin Film Diamond Switches, Christopher Anthony Molina

Electrical & Computer Engineering Theses & Dissertations

The dark current of natural diamond thin films and the induced current due to electron-beam irradiation was measured up to a range of 7000Ncm'. The contact material was aluminum, annealed and unannealed. Switching experiments were performed with electron energies ranging from 70keV to 172keV. The switching results obtained are strongly dependent on the biasing polarity, incident electron energy, and whether the contact is blocking or Ohmic in nature. A simple model which takes traps into consideration allows us to explain the various switching responses. The range of electrons which define, in part, the switch mode was measured for one sample …

Biofeedback Gait Training Auditory Vs. Visual Techniques, Timothy D. Hiemenz

Electrical & Computer Engineering Theses & Dissertations

Training lower extremity amputees to walk normally is quite a difficult task. Amputees must wear a prosthesis so they can walk at all. This allows them some mobility, but their walking pattern may be unnatural. If their gait is temporally asymmetric, they need to exert more energy to move about. This research was initiated to help lower extremity amputees to walk more efficiently using biofeedback gait training. Two types of feedback were developed and tested to determine which method gave the most understandable feedback, validating its use in a clinical setting.

A normal gait cycle uses the lower limbs to …

Transient Simulations And Modelling Of Semi-Insulating Gaas Photoconductive Switches, Prasun Kumar Raha

Electrical & Computer Engineering Theses & Dissertations

The primary objective of this thesis is to develop a one-dimensional transient simulator for Photoconductive Semiconductor Switches (PCSS) taking into consideration the material characteristics, the internal physical effects, and the external circuit. Simulations have been performed to study the device behavior at different voltage levels for copper-doped silicon-compensated GaAs material, though other materials could easily be simulated by changing the parameters. The model includes hole transport, and the results demonstrate the effect of hole injection, with and without recombination centers. In addition to developing a one-dimensional transient simulator, the role of various physical effects, such as the field-dependence of trapping …

Diamond Thin Film Sensors For Hypersonic Flow Studies, Bhaskar Kumar Bulusu

Electrical & Computer Engineering Theses & Dissertations

Conventional metal film sensors can measure flow instabilities of the order of 60 kHz. The turbulence fluctuations in the hypersonic regime are of the order of 200- 400 kHz. To measure these fluctuations, sensors with an enhanced frequency response are required. Therefore, it is required to identify the parameters to enhance the frequency response. These include parameters such as the temperature sensitivity, the resistivity, the thermal conductivity, the diffusivity, specific heat capacity and the geometric size and shape of the film and the substrate. A selection of materials was then carried out to maximize the frequency response. Diamond was identified …

Derivative Absorption Spectroscopy With Tunable Laser Diodes, Andrew D. Jackson

Electrical & Computer Engineering Theses & Dissertations

Derivative Absorption Spectroscopy using tunable diode lasers provides a non­ intrusive, sensitive, and convenient method for monitoring gaseous characteristics such as concentration, temperature, and flow velocity. In addition, the specie type can be identified, and if the equation of state is known, pressure may be deduced.

This technique was used on molecular oxygen, in which the rovibronic transitions of the A-band ( b ¹ ∑_g ⁺ ← X ³ ∑g ^- ; v^II = O, v^I = O) were probed. Phase sensitive detection with a lock-in amplifier provides the flexibility to examine lineshape derivatives; several such derivative …

Optimization Of Electron-Beam Activated Gaas Switches, Raymond Jack Allen Iii

Electrical & Computer Engineering Theses & Dissertations

The use of electron induced luminescence (cathodoluminescence) in gallium arsenide offers the possibility to modulate the conductance of the material on a timescale of nanoseconds and with a pulse rate of MHz, through modulation of an electron-beam current. This ionization mechanism allows the utilization of semi-insulating GaAs in fast, high power closing and opening switches. The efficiency of the switches is determined by the hold-off voltage of the GaAs switches, and by the conversion efficiency of electron energy into (useful) photon energy. Studies of the dark-current and the electron-beam induced conductance in semi-insulating GaAs have been performed in order to …

Dynamic Task Scheduling For The Atamm Multicomputer Operating System Using Embedded Firmware On Microcontrollers, Sudhir Sastry

Electrical & Computer Engineering Theses & Dissertations

A dynamic task scheduling strategy for the distributed processing of large grain dataflow algorithms using embedded firmware on an ATAMM testbed consisting of interconnected microcontrollers is presented in this thesis. The ODU/NASA developed Algorithm to Architecture Mapping Model, ATAMM, uses marked graph models to specify data and control flow for the execution of iterative, deterministic large grain dataflow algorithms in a multicomputing environment. The testbed consists of a bank of four 68HC11 microcontrollers that communicate over a token bus. The token bus arbitration scheme used is contention free and well suited for real-time computing applications. The execution of data flow …

Acoustic Correlates Of Vowel Perception As Determined From Synthesis Experiments With Multi-Tone Stimuli, Zhongjiang Zhang

Electrical & Computer Engineering Theses & Dissertations

An essential requirement of speech signal processing is to extract information (features or parameters) from the speech signal which encode the information carried by the signal. The objective of this thesis work was to examine and evaluate two feature sets as acoustic correlates for vowel perception. They are formants and DCTCs. Formants are the frequencies of spectral peaks of the speech signal. DCTCs are the Discrete Cosine Transform Coefficients of the magnitude spectrum and are thus features which encode the global spectral shape of speech signal.

There are different opinions regarding which feature set is a more accurate representation for …

Light Injection From An Active Cladding To The Core Of A Fiber Optic Fluorosensor, Alvin Leon Bryant

Electrical & Computer Engineering Theses & Dissertations

A fluorosensor works on the basis of light injection from the clad into the core of an optical fiber. The sensitivity of such a sensor depends on the efficiency of light injection. Conditions necessary for a high injection efficiency are experimentally determined. The refractive index difference between the core and the clad,ⁿcore ^-nclad, must be maximized to achieve a high injection efficiency. Since an air clad has the least refractive index, a bare core fiber will have a maximum efficiency. Standard optical fibers used for communication employ a minimum value for ⁿcore ^-nclad, in order …