Electrical and Computer Engineering Commons^™

Large-Scale Der Aggregations Of Electric Water Heaters And Battery Inverter Systems, Kevin Marnell

Dissertations and Theses

Distributed energy resources like residential electric water heaters and residential battery inverter systems offer a small amount of change to the grid individually. When aggregated however, these assets can cause major effects to the electric grid. Aggregating these resources allows them to take on generator-like functions with the ability to increment power and decrement power.

The Western Energy Imbalance Market is an energy market offering 15 minute and 5 minute markets for energy transactions between balancing areas. Generation assets make increment and decrement bids. Traditionally the only entrants to this market have been large scale generators and large scale assets …

Aggregation Of Electric Water Heaters For Peak Shifting And Frequency Response Services, Thomas Leighton Clarke

Dissertations and Theses

The increased penetration of renewable energy sources poses new challenges for grid stability. The stochastic and uncontrollable generation of solar and wind power cannot be adjusted to match the load profile, and the transition away from traditional synchronous generators is reducing the grid capacity to arrest and recover from frequency disturbances.

Additionally, the distributed nature of many renewable energy sources makes centralized control of generation more complicated. The traditional power system paradigm balances the supply and demand of electricity on the grid by regulating generation. As this becomes more difficult, one alternative is to adjust the load instead. This is …

Physics-Based Signal Processing Methods For Terahertz Non-Destructive Evaluation Of Layered Media, Scott G. Schecklman

Dissertations and Theses

In recent years Terahertz (THz) time domain spectroscopy has emerged as a promising new technology with potential applications in a variety of fields, including industrial manufacturing, security screening and medical imaging. Pulsed THz systems are uniquely suited for non-destructive evaluation (NDE) of the sub-surface layers of dielectric packaging and coating materials, because they provide high dynamic range over a wide bandwidth in the far infrared portion of the electromagnetic spectrum. Often the dielectric materials of the packaging and/or surface coating layers exhibit relatively low loss and abrupt changes in the refractive index at the layer boundaries can be observed as …

Uhf And Microwave Phase-Modulated Scattering Array, Nasr Nomas Hussein Alkhafaji

Dissertations and Theses

This dissertation investigates the use an array of active nonlinear elements, with particular emphasis on controlling distortion products generated by nonlinear elements in space rather than using conventional ways such as transmission lines, waveguides, and power dividers and combiners. The nonlinear elements are made of assemblies of antennas and electronic switches, called modulated scatterers (MSs). These so-called MSs elements are utilized in a wide variety of applications such as radio frequency identification (RFID) systems, microwave imaging, Internet-of-Things sensors, etc. However, no research work has been reported in the literature regarding exploiting and controlling several distortion products generated by MSs at …

Very High Frequency Bipolar Junction Transistor Frequency Multiplier Drive Network Design And Analysis, Daniel Dale Schaeffer

Dissertations and Theses

The function of a frequency multiplier is verbatim -- a frequency multiplier is a circuit that takes a signal of particular frequency at the input and produces harmonic multiples of the input signal's frequency at the output. Their use is widespread throughout history, primarily in the application of frequency synthesis. When implemented as a part of a large system, a chain of multipliers can be used to synthesize multiple reference signals from a single high-performance reference oscillator.

Frequency multiplier designs use a variety of nonlinear devices and topologies to achieve excitation of harmonics. This thesis will focus on the design …

Design And Performance Evaluation Of Linear And Axial-Flux Magnetic Gears, Mojtaba Bahrami Kouhshahi

Dissertations and Theses

The conversion from low speed to high speed and vice versa in various forms, including rotary and linear motion, is a requirement for a wide range of applications. For example, wind power generation requires a conversion of low speed rotation of turbine blades to high speed generator rotation, and ocean wave power generation is achievable by conversion of low speed linear motion to either high speed rotation or high speed linear motion. Mechanical gearboxes, hydraulic and pneumatic actuators are commonly used to achieve these conversions. However, these systems suffer from reliability issues, high maintenance requirements, noise, and lack of overload …

Investigation Of Electronic And Optical Properties Of 2-Dimensional Semiconductor Tin Selenide (Snse) Thin Films, Shakila Afrin

Dissertations and Theses

Over the last 5 decades, the semiconductor industry has been well served by Si based technology due to its abundant availability, lower manufacturing cost, large wafer sizes and less complexity in fabrication. Over this period, electronic devices and integrated systems have been miniaturized by downscaling of the transistors. The miniaturization has been guided by the Moore's law where the numbers of transistors have doubled over every two years. However, the trend of transistor miniaturization is fast approaching its limit. Hence, alternate and innovative solutions are necessary to tackle this problem and this propels the research for finding novel materials with …

Efficient Methods For Robust Circuit Design And Performance Optimization For Carbon Nanotube Field Effect Transistors, Muhammad Ali

Dissertations and Theses

Carbon nanotube field-effect transistors (CNFETs) are considered to be promising candidate beyond the conventional CMOSFET due to their higher current drive capability, ballistic transport, lesser power delay product and higher thermal stability. CNFETs show great potential to build digital systems on advanced technology nodes with big benefits in terms of power, performance and area (PPA). Hence, there is a great need to develop proven models and CAD tools for performance evaluation of CNFET-based circuits. CNFETs specific parameters, such as number of tubes, pitch (spacing between the tubes) and diameter of CNTs determine current driving capability, speed, power consumption and area …

Spectral Clustering For Electrical Phase Identification Using Advanced Metering Infrastructure Voltage Time Series, Logan Blakely

Dissertations and Theses

The increasing demand for and prevalence of distributed energy resources (DER) such as solar power, electric vehicles, and energy storage, present a unique set of challenges for integration into a legacy power grid, and accurate models of the low-voltage distribution systems are critical for accurate simulations of DER. Accurate labeling of the phase connections for each customer in a utility model is one area of grid topology that is known to have errors and has implications for the safety, efficiency, and hosting capacity of a distribution system. This research presents a methodology for the phase identification of customers solely using …

Application Of Improved Feature Selection Algorithm In Svm Based Market Trend Prediction Model, Qi Li

Dissertations and Theses

In this study, a Prediction Accuracy Based Hill Climbing Feature Selection Algorithm (AHCFS) is created and compared with an Error Rate Based Sequential Feature Selection Algorithm (ERFS) which is an existing Matlab algorithm. The goal of the study is to create a new piece of an algorithm that has potential to outperform the existing Matlab sequential feature selection algorithm in predicting the movement of S&P 500 (^GSPC) prices under certain circumstances. The two algorithms are tested based on historical data of ^GSPC, and Support Vector Machine (SVM) is employed by both as the classifier. A prediction without feature selection algorithm …

Sniffing, Decoding And Decryption Of Gsm Signals Using Low Cost Hardware And Open-Source Software, Muhammad Talha Choudhry

Dissertations and Theses

We have participated in the creation of almost two terabytes of tables aimed at cracking A5/1, the most common ciphering algorithm used in GSM. Given 114-bit of known plaintext, we are able to recover the session key with a hit rate of 19%. The tables are expected to be unique as they provide the best coverage yet known to the authors and research workers and they are the first step in a real-world passive attack against GSM. An initial investigation and analysis into the air interface of GSM were performed, from both a theoretical and practical point of view. These …

Internet Of Things: Architecture And Services For Healthcare, Ankita Suvagia Ms.

Dissertations and Theses

Internet of Things (IoT) is a recent prominent collaboration of various technologies that enables spatially distributed devices (“things”) to sense, communicate and share information, thus generating a variety of applications and services in Healthcare. IoT is implemented in multiple domains like Smart city, energy and smart grid, Smart home, weather forecasting, Agriculture, Market and Transportation, Manufacturing and testing industries, Healthcare and many more. IoT serves the purpose of making tasks more efficient and productive and at the same time ensuring quality and reliability. IoT technologies provide an enabling framework for inter-connecting devices, systems, and services that go beyond Machine-to-Machine scenarios …

Ict-Enabled Control And Energy Management Of Community Microgrids For Resilient Smart Grid Operation, Mahmoud Saleh

Dissertations and Theses

Our research has focused on developing novel controllers and algorithms to enhance the resilience of the power grid and increase its readiness level against major disturbances.

The U.S. power grid currently encounters two main challenges: (1) the massive and extended blackouts caused by natural disasters, such as hurricane Sandy. These blackouts have raised a national call to explore innovative approaches for enhanced grid resiliency. Scrutinizing how previous blackouts initiated and propagated throughout the power grid, the major reasons are lack of situational awareness, lack of real-time monitoring and control, underdeveloped controllers at both the transmission and distribution levels, and lack …

Improving Retrievals Of Crop Vegetation Parameters From Remote Sensing Data, Nathaniel Levitan

Dissertations and Theses

Agricultural systems are difficult to model because crop growth is driven by the strongly nonlinear interaction of Genotype x Environment x Management (G x E x M) factors. Due to the nonlinearity in the interaction of these factors, the amount of data necessary to develop and utilize models to accurately predict the performance of agricultural systems at an operational scale is large. Satellite remote sensing provides the potential to vastly increase the amount of data available for modelling agricultural systems as a result of its high revisit time and spatial coverage. Unfortunately, there have been significant difficulties in deploying remote …

Software Defined Radio For Hybrid Beamforming Applications, Jianyet Lee

Dissertations and Theses

Beamforming techniques have been deployed in both licensed networks such as LTE network and unlicensed network such as IEEE802.11ac WiFi. The scope of work for this thesis is to leverage the benefits of beamforming techniques and software defined radio platform in developing a fully functioning LTE testbed. The testbed can be further developed to specific application for drone-to-drone or D2D communication independent of intervention from base stations. Applying beamforming techniques to devices such as drones can solve poor quality signal detection at the receivers due to the interference signals generated by other devices in the attempt to communicate with the …

Automating Variation And Repeater Analysis In Physical Design Of Integrated Circuits, Subrat Mahalik

Dissertations and Theses

Rapid advancement and innovation in semiconductor research have continuously helped in designing efficient and complex integrated circuits in miniature size. As the device technology, is aggressively scaling to improve the device performance, the issues related to device interconnects, power, and reliability have become a major concern for the designers. These challenges make the design and validation of ASIC extremely complicated.

The primary idea of this work is to develop automation tools, to be used in the physical design flows to improve the efficiency of the design flow. The first tool named as variation analysis tool automates the on-chip variation modeling …

Adoption Of An Internet Of Things Framework For Distributed Energy Resource Coordination And Control, Tylor Slay

Dissertations and Theses

Increasing penetration of non-dispatchable renewable energy resources and greater peak power demand present growing challenges to Bulk Power System (BPS) reliability and resilience. This research investigates the use of an Internet of Things (IoT) framework for large scale Distributed Energy Resource (DER) aggregation and control to reduce energy imbalance caused by stochastic renewable generation. The aggregator developed for this research is Distributed Energy Resource Aggregation System (DERAS). DERAS comprises two AllJoyn applications written in C++. The first application is the Energy Management System (EMS), which aggregates, emulates, and controls connected DERs. The second application is the Distributed Management System (DMS), …

Short-Term Tracking Of Orientation With Inertial Sensors, Golriz Sedaghat

Dissertations and Theses

In the past several years, IMU's have been widely used to measure the orientation of a moving body over a continuous period of time. Although, inertial navigation is a common approach for estimating the orientation, it greatly suffers from the accumulation of error in the orientation estimation. Most of the current common practices apply zero velocity update as a calibration method to address this problem and improve the estimation accuracy. However, this approach requires the sensors to be stationary frequently.

This thesis introduces a novel method of calibration for estimating the elevation and bank angles of the orientation over a …

Electric Water Heater Modeling For Distributed Energy Resource Aggregation And Control, Anne E. Clarke

Dissertations and Theses

Today's utilities face new challenges due to the continually increasing penetration of residential solar and other distributed, stochastic generation sources. In order to maintain balance and stability in the grid without building costly, large-scale generation plants, utilities are turning to distributed energy resources for use in demand response programs. Demand response is a cost-efficient way to balance grid load/generation without the need for increased capital investment in traditional generation resources. Demand response programs are excellent exploiters of end-user devices that otherwise further accentuate the daily load curve and thus, add to the difficulties created by daily load peaks.

Electric water …

Dark Current Rts-Noise In Silicon Image Sensors, Benjamin William Hendrickson

Dissertations and Theses

Random Telegraph Signal (RTS) noise is a random noise source defined by discrete and metastable changes in the magnitude of a signal. Though observed in a variety of physical processes, RTS is of particular interest to image sensor fabrication where progress in the suppression of other noise sources has elevated its noise contribution to the point of approaching the limiting noise source in scientific applications.

There have been two basic physical sources of RTS noise reported in image sensors. The first involves a charge trap in the oxide layer of the source follower in a CMOS image sensor. The capture …

New Approaches For Memristive Logic Computations, Muayad Jaafar Aljafar

Dissertations and Theses

Over the past five decades, exponential advances in device integration in microelectronics for memory and computation applications have been observed. These advances are closely related to miniaturization in integrated circuit technologies. However, this miniaturization is reaching the physical limit (i.e., the end of Moore's Law). This miniaturization is also causing a dramatic problem of heat dissipation in integrated circuits. Additionally, approaching the physical limit of semiconductor devices in fabrication process increases the delay of moving data between computing and memory units hence decreasing the performance. The market requirements for faster computers with lower power consumption can be addressed by new …

Power Spectrum Prediction Of Amplified Dual-Band Lte-Advanced Signals, Xianzhen Yang

Dissertations and Theses

In wireless communication, the nonlinearity of a radio frequency (RF) power amplifier is an important issue for power amplifier designers. Since the nonlinearity is generated by the properties of physical components, it is hard to avoid it in producing power amplifiers. Power amplifier designers should know about the nonlinearity in order to compensate for it.

A two-tone test is a relatively widely used method to measure the nonlinearity of a power amplifier, which means the third order intercept point (IP3) can be measured from the two-tone test. Through the two-tone test, researchers have proposed some formulae to present what the …

Hierarchical Random Boolean Network Reservoirs, Sai Kiran Cherupally

Dissertations and Theses

Reservoir Computing (RC) is an emerging Machine Learning (ML) paradigm. RC systems contain randomly assembled computing devices and can be trained to solve complex temporal tasks. These systems are computationally cheaper to train than other ML paradigms such as recurrent neural networks, and they can also be trained to solve multiple tasks simultaneously. Further, hierarchical RC systems with fixed topologies, were shown to outperform monolithic RC systems by up to 40% when solving temporal tasks. Although the performance of monolithic RC networks was shown to improve with increasing network size, building large monolithic networks may be challenging, for example because …

Silicon Compilation And Test For Dataflow Implementations In Gasp And Click, Swetha Mettala Gilla

Dissertations and Theses

Many modern computer systems are distributed over space. Well-known examples are the Internet of Things and IBM's TrueNorth for deep learning applications. At the Asynchronous Research Center (ARC) at Portland State University we build distributed hardware systems using self-timed computation and delay-insensitive communication. Where appropriate, self-timed hardware operations can reduce average and peak power, energy, latency, and electromagnetic interference. Alternatively, self-timed operations can increase throughput, tolerance to delay variations, scalability, and manufacturability.

The design of complex hardware systems requires design automation and support for test, debug, and product characterization.

This thesis focuses on design compilation and test support for dataflow …

Fossil Fuel Impact Of Buildings Electrification In New York City, Mattia Sartori

Dissertations and Theses

New York City's commitment to reduce Greenhouse Gases (GHG) emissions 80% by 2050 (80X50) requires a deep citywide conversion from fuel combustion systems to more efficient technologies, such as air-source heat pumps. Moreover, this challenging goal relies also on a much cleaner grid with the majority of electrical generation being provided by renewable sources, such as solar and wind. In this regard, building electrification is being considered as a possible solution in order to reduce emissions and maximize the efficiency of the energy utilization as well as improve the comfort of the indoor environment.

Under the assumption of a cleaner …

Analysis Of The Benefits Of Regenerative Braking In Urban Railway Traction System, Khan M. Adnan

Dissertations and Theses

Increasing environmental awareness and the requirement for lower project costs is forcing transit system suppliers to think more innovatively and engineer more accurately to strengthen their competitive edge. Of late, clients more often desire a system that is optimized to minimize the energy consumed during operation; a requirement that is often imposed upon transit system suppliers through financially binding energy commitments.

Electric rail transit systems are large consumers of energy. In trains with regenerative braking capability, a fraction of the energy used to power a train is regenerated during braking. This regenerated energy, if recuperated and reused, can result in …

A Case Study On Grid Impacts Of Electric Vehicles On New York City Power Grid, Amir Abbas Rizvi

Dissertations and Theses

The U.S. electric power industry is anticipating a huge increase in electricity demand in the future due to reformation of the transportation industry. In this work, we focus on electric cars and their impact on the transportation industry as well as the electric grid. The increase in number of electric cars over the years and their growing number indicates that in the future, transportation means are going to largely depend upon electricity to achieve cost and environmental benefits. In other words, in future, the transportation will be impacting the electric grid and vice versa.

The surge in electric vehicles on …

A Quantification Analysis On Potential Use Of Recuperated Regenerative Braking Energy From Nyct Subways Into Charging Electric Buses, Ahmed S. Rahman

Dissertations and Theses

The New York Metropolitan Transportation Authority (MTA) is one of the biggest consumers of electricity in east coast of the United States. According to a report published by Dayton T. Brown in 2013, MTA consumes approximately 2150 GWh electrical energy per year for traction power, where the New York City Transit (NYCT) alone is a consumer of about 80% of the total annual MTA energy consumption. This continuous high demand for electricity from a single organization opens research opportunities to search for alternative ways to reduce the needs. NYCT Subways has an existing total rolling stock of 6,418 train cars …

On The Feasibility Of Utilizing Commercial 4g Lte Systems For Misson-Critical Iot Applications, Alfred Rezk

Dissertations and Theses

Emerging Internet of Things (IoT) applications and services including e-healthcare, intelligent transportation systems, smart grid, and smart homes to smart cities to smart workplace, are poised to become part of every aspect of our daily lives. The IoT will enable billions of sensors, actuators, and smart devices to be interconnected and managed remotely via the Internet. Cellular-based Machine-to-Machine (M2M) communications is one of the key IoT enabling technologies with huge market potential for cellular service providers deploying Long Term Evolution (LTE) networks. There is an emerging consensus that Fourth Generation (4G) and 5G cellular technologies will enable and support these …

Energy Management System Of Hybrid Wayside Storage In Urban Railway Traction, Anil Rajpatei

Dissertations and Theses

In a city that never sleeps, NYC, also called the big apple, there is the largest population in the United States with close to 9 million people. In addition, it is the second wealthiest city in the world according to ranking by gross domestic product (GDP). Being such a densely populated city, people cannot only rely on their vehicles as the only source of commute. The alternative is to use mass transit. New York City Transit (NYCT) is the largest mass transit system that offers commuting services via subway or buses. More than half of the population rely on mass …