Electrical and Computer Engineering Commons^™

Elevate Grill, Brady Alexander

Electrical Engineering

The Elevate Grill Senior Project is a Santa Maria style grill with an electrical lifting/lowering mechanism and temperature sensor feedback. The grill allows for a dynamically controlled cooking surface, able to be automatically set or manually set by the user. The grill’s user interface informs the user about the temperature in different zones on the grill and alerts the user when the target temperature is hit. Additionally, the user can program preset temperature ranges and apply them to the grill’s control system. The system incorporates safe failure modes in the event of a power outage and also allows the user …

Pcb Design For Place Cells Vlsi Chip, Gavin Reaksecker, Alex Krier, Joshua Lin

Electrical Engineering

This project presents the design and implementation of a 2 layer test-bench printed circuit board (PCB) for evaluating the functionality of a custom 40-pin VLSI integrated circuit. The objective is to create a reliable and portable platform capable of supplying configurable bias voltages, generating variable input signals, and monitoring both analog and digital outputs. The board integrates adjustable bias networks using potentiometers, digital and analog buffering stages, and optional battery supply operation. The VLSI device under test is mounted in dual-in-line (DIP) sockets to enable rapid replacement and repeated characterization. Dedicated test points are incorporated throughout the PCB to facilitate …

Solving Linearly Constrained Quadratic Programs Using Field Programmable Analog Arrays, Tyler Wynn, Alonzo Arroyo

Electrical Engineering

This paper presents a field-programmable analog array (FPAA) implementation for solving linearly constrained quadratic programs (LCQPs) directly in the analog domain. The solver is based on a continuous-time primal-dual control architecture with integral action, anti-windup compensation, and a piecewise-linear nonlinearity for enforcing affine inequality constraints. A switched-capacitor implementation using three AN231E04 FPAAs is developed, and coefficient scaling methods are introduced to keep internal and output signals within the voltage limits of the hardware. A global scaling factor is used to reduce internal signal excursions, while solution-space scaling is shown to modify the implemented optimization coefficients and alter the local closed-loop …

Autonomous Rover Solar And Battery Management System: Team B, Karla Jazmin Lira Gonzalez, Paige Ambriz, Kunj Shah, Elhom Delasa Sheykhi

Electrical Engineering

This project focused on the software and printed circuit board (PCB) integration for Poly1Rover’s battery management system (BMS). Poly1Rover is a student organization dedicated to building a low-cost autonomous rover designed to operate on Mars. Since solar availability, temperature, and other conditions on Mars vary, the rover requires a reliable battery management system that accurately monitors battery health and status. This team’s work included the communication and control side of the BMS. The subsystem was designed around the Renesas ISL94202 battery monitor and the MSP430 controller. Battery information was read from the ISL94202 registers through I2C communication, converted from raw …

Evaluation Of Laser Doppler Flowmetry And Transillumination Laser Speckle Contrast Imaging To Measure Blood Flow Change In Ischemia Mouse Hindlimb Models, Simon Park

Master's Theses

Peripheral Artery Disease (PAD), caused by plaque buildup and narrowing of the arteries, reduces blood flow to the extremities. Promoting collateral arteriogenesis can help redirect blood flow. However, simple growth of collaterals may not be enough to reverse PAD. Instead, the ability for the collaterals to vasodilate and control blood flow is important, meaning assessing collateral function is important for the arteriogenesis assesment. Although microscopy techniques can measure vasodilation, contrast limitations in larger vessels such as collaterals make blood flow measurements difficult. Techniques such as ultrasound or magnetic resonance imaging (MRI) can measure blood flow but have limitations with cost …

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …

Foundation For A Digital Beamforming System Using Software Defined Radio, Daniel Cruz Guerrero, Shiron Bendrihem, Benjamin Tucker

Electrical Engineering

This report demonstrates a basis for the foundation of a software-defined radio (SDR)-based digital beam forming system. Specifically, a discussion of time, frequency, and phase synchronization is had in the absence of costly hardware like an OctoClock. Furthermore, this report digs deep into the design process and device characterization of a 4-way Wilkinson Power Divider, which is a necessary hardware component for phase calibration. SDR synchronization and calibration are critical in any digital beamforming system.

Design And Characterization Of A Pulsed Electric Field Chamber For Microalgae Lysis, Connor Strutin

Electrical Engineering

Microalgae are a promising renewable source of biofuel due to their high lipid content and rapid growth rates; however, algae cells must be electroporated (lysed) to release these lipids. The system developed in this project applies short (40 μs–10 ms), high-intensity (up to 33 kV/cm) pulsed electric fields (PEF) across cell membranes to enable electroporation.

Our lab-scale PEF chamber generates uniform, high-intensity electric fields using parallel-plate electrodes with sub-millimeter spacing. The system is designed to efficiently lyse microalgae cells for lipid extraction and biofuel production.

Maximum Power Point Tracking For Photovoltaic Cells, Rodrigo Menchaca-Ramirez, Jesus Martinez, Steven Rodriguez

Electrical Engineering

Unlike an ideal DC Power Supply, a solar panel does not operate with linear I-V Characteristics. The voltage and current characteristics of a solar panel change based on irradiance, temperature, weather conditions, and load demand. Because of these factors, solar panels do not always operate at their Maximum Power Point, which can lead to significant power losses. Maximum Power Point Tracking is used to adjust the panel operating point so that more usable power can be delivered to the load.This project developed a Maximum Power Point Tracking system using an STM32 Nucleo-L4A6ZG microcontroller and an LT8705A DC-DC converter stage. The …

Practical Multimodal Wearable Sensing For Functional Upper Extremity Primitive Classification With Application To Stroke Rehabilitation, Nicholas Weiss

Master's Theses

Stroke often causes long-term weakness and impaired motor control in the upper extremity (UE), making everyday tasks such as reaching, grasping, and moving objects more difficult. Restoring functional arm use is therefore a central goal of post-stroke rehabilitation. Measuring affected arm use continuously and objectively is important because isolated clinical assessments may not fully capture how the affected arm is used during therapy or daily life. Wearable sensors offer a promising approach for monitoring, but raw sensor signals are difficult to interpret directly. Functional movement primitives address this issue by describing UE behavior as smaller, task-agnostic movement units.

This thesis …

Test Bench Pcb Design For A Vlsi Grid Cell Chip, Nicholas Bruk, Jason Alexandar

Electrical Engineering

This report presents the design, implementation, and validation of a custom printed circuit board (PCB) test bench for a VLSI grid cell emulation chip. The final board provides two independently adjustable 5V supplies using LM317 linear regulators, eleven potentiometer-controlled bias voltages, high-impedance buffering of analog outputs via an MCP6022 dual operational amplifier, and buffering of digital outputs using a 74HC244 buffer IC. The design includes a 40-pin DIP socket for the VLSI chip, extensive test-point headers for probing, and a 9V battery input for portable operation. Five fully functional boards were fabricated using ExpressPCB and assembled with through-hole components. An …

Design And Parametric Testing Of A Transimpedance Amplifier For Low-Power Biomedical Applications, Stanlon Tan, William Chung, Brandon Wu

Electrical Engineering

This project developed and evaluated an optical sensing system for detecting changes associated with glucose concentration. The system combined a laser-diode, cuvette sample holder, photodiode, resistive-feedback transimpedance amplifier, high-resolution analog-to-digital converter, and microcontroller. Parametric testing evaluated the effects of input current and feedback resistance on transimpedance gain, output range, and linearity. Firmware was developed to configure the ADC, average repeated conversions, monitor measurement variation, convert raw digital counts into voltage using a source-meter calibration equation, and compare sample measurements with a water reference. A cuvette enclosure maintained alignment between the laser-diode, sample, and photodiode while reducing external optical interference. Testing …

Performance Evaluation Of Roadside Unit-Assisted Wireless Communication For Connected Vehicles, Keyrollos A. Hanna, Ethan M. Nguyen

Electrical Engineering

This project presents the design and implementation of a wireless communication network intended to improve situational awareness between vehicles and reduce the likelihood of multivehicle collisions. Two TurtleBot3 Burger platforms equipped with Raspberry Pi computers were used to simulate vehicles operating within a shared environment. Communication latency and packet loss were evaluated under multiple operating conditions, including direct vehicle-to-vehicle communication and communication assisted by a roadside unit (RSU). The results were analyzed to determine whether the proposed system could transmit warning messages with sufficient speed and reliability for collision prevention applications. The project demonstrates the feasibility of low-cost vehicle communication …

Simulation Of Silicon Neurons With Memristive Synapses For Ai Accelerators, Marcus Ivey, Kelvin Shi

Electrical Engineering

This project seeks to design and simulate a neuromorphic spiking neural network (SNN) that implements the logical AND and logical OR operation through the interaction of a Leaky Integrate-and-Fire (LIF) output neuron and memristive synapses modeled using the Biolek formulation. Two pulsed inputs are transmitted through memristive devices whose conductance serves as the synaptic weights. A supervised Hebbian training strategy, implemented in MATLAB, is employed to adjust the synaptic conductance according to the Hebbian delta rule. The proposed framework demonstrates how elementary logical computation may arise from biologically motivated learning processes embedded in hardware-realistic neuromorphic circuits. The study provides a …

Wildlife Tracking Via Uav&Rf, Nam Ah Nguyen

Electrical Engineering

Animal tracking collars transmit very-high-frequency (VHF) beacon signals so researchers can locate tagged wildlife in terrain where direct visual tracking is difficult. This project develops a radio-frequency (RF) wildlife tracking prototype in which a UAV carries a receiving antenna and receiver over the search area to detect the collar signal and send measurements to a ground station. A transmitter test device was built to emulate a tracking collar. An STM32 microcontroller reads keypad input, controls a digital-to-analog converter (DAC), tunes a voltage-controlled oscillator (VCO) to the selected VHF frequency, and sends the RF signal through an amplifier and antenna. The …

Uav Trio Formations For Aerial Pest Deterrence With Vision-Based Bird Monitoring, Benjamin Andrew Ly, Chris Kwon, Christian Joseph Macaranas

Electrical Engineering

No abstract provided.

Portable Food Pasteurization Using Pulsed Electric Fields (Pef), Thomas E. Mcmillan Iii

Electrical Engineering

Foodborne illnesses remain a significant public health concern, motivating continued development of alternative food pasteurization technologies. Pulsed electric field (PEF) treatment is a non-thermal pasteurization method that inactivates microorganisms through electroporation while minimizing thermal degradation of food products. The long-term objective of this project was development of a portable PEF food pasteurization system.

An iterative design approach was used to investigate generation of the high-voltage pulses required for PEF treatment. Multiple pulse forming network topologies were evaluated through simulation, leading to selection of a solid-state Marx generator architecture. A low-voltage five-stage prototype was designed, constructed, and tested to validate the …

Pv Performance Evaluation Study At Cal Poly Solar Farm, Eva Paola D. Calderon

Electrical Engineering

This photovoltaic (PV) system performance evaluation study aims to assess the performance of Cal Poly’s Gold Tree Solar Farm, which produces 4.5MW of solar energy. The evaluation concerns itself with the reliability of the PV system that can be affected by weather conditions, component malfunctions, and degradation of the PV modules. Under the International Energy Agency Photovoltaic Power Systems (IEA-PVPS) Task 13 objectives of reliability and maintenance, this study is necessary to contribute towards improvements in analysis and mitigation strategies for long term usage. Existing operational monitoring data from 2018 to 2025 is the focus timespan, providing real world data …

A Broadband, Dual Polarized Antenna For The Radio Neutrino Observatory In Greenland, Laken Baker

Electrical Engineering

Neutrinos contain information necessary to determine the origins of the universe and cosmic events because they can travel long distances with minimal interaction, preserving information about their cosmic origins. Since neutrinos interact with ice sheets resulting in RF radiation, antennas have been developed to detect RF transmissions.

A compact 'vane structure' (see Fig. 1a) dual-polarized broadband antenna model has been developed, constructed, and characterized according to input reflection coefficient, and co and cross-pol E and H plane radiation patterns using HFSS and Cal Poly San Luis Obispo’s anechoic chamber for the Radio Neutrino Observatory in Greenland (RNO-G) [1]. Its design …

Wireless Communication In Autonomous Vehicles, Kaylie Bao, Nicholas Andrews, Mark Negus

Electrical Engineering

This project focuses on developing and testing a vehicle-to-everything (V2X) communication system using Dedicated Short Range Communications (DSRC) based on the IEEE 802.11p standard. The system uses the NXP i.MX 8XLite V2X Evaluation Kit, which includes the SAF5400 modem for wireless communication in the 5.9 GHz band.

The main goal of this project was to establish reliable communication between two V2X evaluation boards and to verify that custom, user-defined data could be transmitted between them. Through iterative testing, we were able to successfully send and receive custom 802.11 frames using the provided command-line tools and achieve consistent communication between nodes. …

Vlsi Spike Encoder For Spiking Neural Networks With 4-Bit Sar Adc, Jack Marshall, Wyatt Tack, Cameron Young, Ryken Thompson

Electrical Engineering

A spike encoder forms the interface between sampled data, such as image data or a sensor signal, and a spiking neural network by converting numerical input samples into discrete spike events. Unlike conventional artificial neural networks, spiking neural networks use spare, even-driven computation instead of continuous-valued activations. This makes them attractive for low-power embedded systems, biomedical electronics, and other edge applications where energy consumption, physical area, and thermal limits are important design constraints.

This project develops a modular spike encoder architecture for spiking neural networks with selectable support for temporal, rate, multi-spike, and delta encoding. Prior work has shown that …

Lora Radio Propagation & Antenna Design For Freight Trains, Cesar Chavez, Marlon Jennson Hernandez

Electrical Engineering

Freight-train environments present significant challenges for wireless communication due to large metallic structures, varying cargo types, and changing antenna orientations that can degrade radio-frequency propagation. This project evaluated the performance of LoRa-based communication links intended for End-of-Train (EOT) and Head-of-Train (HOT) systems operating at 915 MHz. Field testing was conducted to characterize antenna performance using metrics including received signal strength indicator (RSSI), signal-to-noise ratio (SNR), and communication range. Experimental results showed that antenna polarization and directivity significantly affect communication performance in freight-train environments. Directional antennas provided improved signal strength when properly aligned but experienced performance degradation as antenna orientation changed. …

Cal Poly Mars Rover Battery Management System, Lawrence Nichols, Caleb Michael King, Thomas Anh Khoa To, Angel Soto

Electrical Engineering

The exploration of space has consistently been one of the most expensive endeavors humanities has undertaken in its journey to expand ever further. The PolyRover project aims to not only cheapen that expense through student-based research but also provide a better bang for buck as more unmanned ground vehicles (UGVs) can be utilized on planets in concert. In order to do so, the rovers need a robust, yet compact battery management system that can fit within the wheel well. Our system will consist of six commercially-available 18650 batteries in series, organized in a hexagonal fashion around the motor. The BMS …

Lora Networking Hardware Reference Designs For Terrestrial And Low-Earth-Orbit Communications, Kevin Nottberg

Master's Theses

The work presented here demonstrates a highly robust and tested LoRa networking hardware reference design to meet the needs of the embedded networking company OWL Integrations. The hardware presented integrated a unique combination of features and design choices. The detailing of its unique design is potentially of use to others for use in fielded battery powered terrestrial sensor networking hardware utilizing LoRa. Also, the terrestrial hardware presented is shown to have the capability to support command and control (C2) LoRa links in low-earth orbit beyond terrestrial systems. The design presented has a more U.S. centric component bill-of-materials (BOM), with the …

Design And Parametric Study Of A Mems-Based Reservoir Computer For Reinforcement Learning, Andrew P. Carr

Master's Theses

Single-node reservoir computing (RC) is a hardware-efficient approach to machine learning, leveraging the dynamics of physical systems. In this work, two reinforcement learning algorithms, Q-learning and Proximal Policy Optimization (PPO), are applied to a simulated micro-electro-mechanical system (MEMS)-based reservoir computer to solve both discrete and continuous control tasks. MEMS-based reservoirs are low-power, compact, and their natural frequencies (kHz to MHz) pair well with real-time control loops. To explore the relationship between reservoir dynamics and learning performance, a parametric study is conducted on two reservoir hyperparameters, reservoir size and neuron separation, using CartPole-v1 and MountainCar-v0. The RC successfully learns multiple tasks …

Dot Product Engine Based Neuromorphic Hardware For Continuous-Time Biomedical Signal Classification, Sanjeev Srinivasan

Master's Theses

Accurate diagnosis of pathological conditions from biomedical signals, such as electrocardiograms (ECGs) is often performed offline, making it time-consuming, costly, and inefficient, especially when abnormal patterns are rare and long-term monitoring generates large amounts of data. To address this, this work proposes a compact, scalable, and programmable neuromorphic system designed for real-time preliminary arrhythmia detection and classification using ECG signals, that can be extended to other biomedical signals. The proposed design processes ECG signals using a delta modulation-based spike encoder, followed by classification with a dot-product engine (DPE) based spiking neural network (SNN) processor and winner-take-all (WTA) circuit. The architecture …

Alford Loop Antennas For Ultra-High Energy Neutrino Detection, John K. Kimura

Master's Theses

The neutrino is a fundamental particle of matter emitted by high energy phenomena, such as supernovae and black holes. Detecting neutrinos can give scientists information regarding the frequency of high-energy cosmic events, as well as point them towards specific high-energy events. Ultra-high energy (UHE) neutrino interactions in Greenland ice result in electromagnetic pulses between 200MHz and 800MHz. The Radio Neutrino Observatory - Greenland (RNO-G) seeks to observe the resultant electromagnetic waves. The Alford Loop antenna is proposed to detect these emissions, because of its dipole-like radiation pattern, horizontal polarization, and adequate dimensions to fit in a 10" diameter ice borehole. …

Design And Reliability Analysis Of A Radiation-Tolerant On-Board Computer System For Martian Surface Missions, Jack Ryan

Master's Theses

Space environments present complex challenges for electronic devices, perhaps most notably in the form of radiation effects; the natural protections provided by Earth’s atmosphere and magnetosphere are largely absent in deep space and extraterrestrial environments, making single-event effects (SEE) a critical concern. Although radiation-hardened components offer near-immunity to SEE, they possess tremendous drawbacks in both cost and performance. To circumvent such issues, this thesis investigates the feasibility of leveraging a commercial-off-the-shelf (COTS) device, the AMD KRIA K24 system-on-module (SOM), for use in Martian surface missions.

Detailed models were used to predict SEE rates in the system, and system-level fault tree …

Central Pattern Generator Test Bench Report, Stephanie Wing-Yee Lee, Dustin Wong, Joseph Hernandez

Electrical Engineering

The project presents the design, fabrication, and implementation of a PCB test bench that interfaces with a custom VLSI chip designed to emulate the neural activity of a Central Pattern Generator (CPG). The test bench provides a precise and reliable platform for supporting signal operations and validating neuromorphic functionality. The design integrates both analog and digital circuitry to provide stable biasing, signal routing, and measurement access for chip characterization. The incorporation of op-amp buffers and adjustable potentiometers enables precise voltage tuning, resulting in controlled neuron-like behavior within the custom IC. The two-layer PCB supports modular interfacing with standard laboratory instruments …

Portable Ice Cube Maker, Ayden Ziegler, Emiliano Hansen, Wyatt Engdahl, Dane Hansen

Mechanical Engineering

This Final Design Report outlines the senior design project undertaken by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo, for the development of a portable backpacking ice cube maker. The project aims to design, build, and test a lightweight, compact device that produces ice cubes for backpackers in remote outdoor environments. The goal is to create a functional prototype that is durable, user-friendly, and suitable for backcountry use. This document details background research, project objectives, and project plan, and current design status.