Electrical and Computer Engineering Commons^™

Cmos Current Mirrors With Reduced Input And Output Voltage Requirements, Vladimir I. Prodanov, Michael M. Green

Electrical Engineering

A CMOS current mirror with lower than V_DS(sat) input voltage requirement is presented. It is shown that the structure can be modified to provide cascode-type output resistance for output voltages even lower than 2 V_DS(sat). The topology of the proposed current mirror allows low distortion operation from a single 1.5V supply, which makes it attractive for low-voltage applications.

3-D Computer Vision Using Structured Light: Design, Calibration, And Implementation Issues, Fred W. Depiero, Mohan M. Trivedi

Electrical Engineering

Structured light (SL) sensing is a well-established method of range acquisition for computer vision. We provide thorough discussions of design issues, calibration methodologies, and implementation schemes for SL sensors. The challenges for SL sensor development are described and a range of approaches are surveyed. A novel SL sensor, PRIME, the PRofile Imaging ModulE recently has been developed and is used as a design example in the detailed discussions.

Biquad Gm-C Structures Which Use Double-Output Transconductors, Vladimir I. Prodanov, Michael M. Green

Electrical Engineering

Two Gm-C biquad structures are derived. They use only two grounded capacitors and three transconductors, two of which have double-outputs. The realization of the double-output transconductors is discussed. It is shown that only two additional transistors are needed to convert a single-output transconductor to a double-output one suitable for implementation of the proposed structures. HSPICE simulations and experimental results of a 5-th order inverse Gaussian filter using the proposed biquad structures are given.

Effects Of Hydrogen On Inp Light-Emitting Devices Etched In A Methane-Hydrogen Environment, Patricia Beck, Dennis J. Derickson, Forrest Kellert, Tim Bagwell

Electrical Engineering

Research has been conducted on the physical damage and hydrogenation effects during RF plasma exposure and epitaxial growth in the III-V material system. Device consequences of this damage or chemical alteration have received less attention, particularly in active light emitting devices. This paper discusses these effects for lasers and edge emitting light-emitting diodes (EELEDs) which use a ridge waveguide structure. By using analysis techniques such as SIMS we have concluded that methane-hydrogen reactive ion etching of InP induces hydrogen levels in an active device which are high enough to significantly alter the device properties. The decrease in light output is …

Visible Light Emitting Diodes Fabricated From Soluble Semiconducting Polymers, Alan J. Heeger, David Braun

Electrical Engineering

Visible light LEDs are produced having a layer of conjugated polymer which is cast directly from solution or formed as a gel-processed admixture with a carrier polymer. The LEDs can be formed so as to emit polarized light.

Electroluminescence And Photoluminescene Efficiency Of Poly(P-Phenylenevinylene) Deriatives, E. Staring, R. Demandt, David Braun, G. Rikken, Y. Kessener, A. Venhuizen, M. Van Knippenberg, M. Bouwmans

Electrical Engineering

Alkoxy, alkyl, and cyano derivatives of poly(p-phenylenevinylene) [PPV] are used as the emissive layers in light-emitting diodes [LEDs] to obtain luminescence from red to blue. We present the luminescence efficiency for these soluble PPV derivatives. comparing the photoluminescence [PL] yields with the electroluminescence [EL] yields. PL efficiency increases with the fraction of non-conjugated units. EL efficiency depends not only on the radiative recombination efficiency of the emitting material but also on carrier transport to and within the material. Efforts to improve the efficiency and long term stability of these polymer LEDs are challenged by efficient and balanced carrier …

Video Technologies For Roadway Surveillance And Automated Detection, C. Arthur Maccarley, Leonard Ponce

Electrical Engineering

Closed circuit television (CCTV) systems deployed on roadway networks are believed to be among the best mechanisms for providing useful, reliable information for effective traffic management. Video images may be displayed and viewed directly by traffic management personnel for surveillance purposes, or may be processed electronically for detection of traffic metrics such as average vehicle speed, flow volume, and traffic density.

This paper summarizes the current state-of-the art in video imaging and video signal processing technology for traffic surveillance and electronic detection. Technical considerations relevant to the selection of video cameras and computer vision hardware and software for this application …

Travelling Wave Electrode Optimization For High Speed Electro-Optic Modulators Using The Fourier Series Method, W. Boyu, X. Guangjun, Xiaomin Jin

Electrical Engineering

The performance of Z-cut Mach-Zehnder high speed LiNbO₃ amplitude modulators with a CPW traveling wave electrode, has been analyzed and optimally designed in detail by the Fourier series method. The effect of electrode and buffer layer thickness on the electric field distribution in the substract, effective micro- wave refractive index and characteristic impedance of CPW electrode, are discussed. Calculation shows that increasing the thickness of the electrode and SiO₂ buffer layer can improve the phase velocity mismatch between electric and optical waves, and the drive power required by the modulator with thin buffer layer and thick electrode is …

Schottky Effect At A Metal-Polymer Interface, G. Rikken, David Braun, E. Staring, R. Demandt

Electrical Engineering

We report the observation of the Schottky effect at the interface between a metal and a semiconducting polymer by means of internal photoemission spectroscopy. The bias dependence of the barrier provides information on the electrical properties of the polymer.

State-Of-The-Art: In Polymer Light-Emitting Diodes Neome Polymer Led Mini Symposium (15–17 September 1993, Eindhoven, The Netherlands), David Braun, Adam Brown, Emiel Staring, E. W. Meijer

Electrical Engineering

A symposium focused on recent progress in the field of polymer light-emitting diodes was held in Eindhoven during the period 15–17 September 1993. The following is a brief summary of highlights of the symposium. There will be no published proceedings.

A Current-Mode Fdnr Circuit Element Using Capacitive Gyrators, Vladimir I. Prodanov, Michael M. Green

Electrical Engineering

A current-mode implementation of a frequency-dependent negative resistance (FDNR) element is presented using a novel capacitive gyrator. This FDNR element lends itself well to the design of low-pass ladder filters and its use will result in a more efficient integrated circuit implementation than filters that simulate floating inductors using resistive gyrators.

Ultrafast Dynamics In Field-Enhanced Saturate Absorbers, J. R. Karin, R. J. Helkey, Dennis J. Derickson, R. Nagarajan, D. S. Allin, J. E. Bowers, R. L. Thornton

Electrical Engineering

Absorption recovery dynamics of GaAs/AlGaAs field-enhanced waveguide saturable absorbers are studied by pump-probe differential transmission measurements. We compare the response of bulk and single quantum well absorbers at different reverse bias levels and pump powers, and find an ultrafast transient in the response, followed by a slower rise before the final recovery. The absorption fully recovers after a few picoseconds, which is an important result for mode-locked lasers.

Journal Of Engineering Education Round Table: Reflections On The Grinter Report, James G. Harris, Eugene M. Deloatch, William R. Grogan, Irene C. Peden, John R. Whinnery

Electrical Engineering

The Round Table is a new presentation format for the Journal of Engineering Education. The purpose of the Round Table is to present the comments of several distinguished individuals about a topic as well as their responses to the comments offered by their colleagues. For the initial Journal of Engineering Education Round Table we asked for reflections about the Grinter Report, published in September 1955.

After a brief introduction to the topic of discussion, the invited participants present their views, and, then, respond to the remarks of their colleagues. The goal is two-fold: to present a spectrum of views on …

High Power Edge-Emitting Light Emitting Diodes At 1.5Μ With Extremely Low Back Facet Feedback, J. E. Fouquet, G. R. Trott, W. V. Sorin, M. J. Ludowise, D. M. Braun, Dennis J. Derickson

Electrical Engineering

This paper describes novel semiconductor sources for optical low coherence reflectometry (OLCR), a measurement technique for characterizing device and fiber reflections with high sensitivity and high spatial resolution. Lasers and conventional superluminescent LEDs are not suitable for OLCR because strong reflections from the back facets mask weak reflection signals from the device or fiber under test. Even standard edge emitting LEDs (EELEDs) show significant reflections, which have limited the dynamic range of previous measurements. Low source output powers have also limited sensitivity. In order to obtain high power while minimizing internal reflections, a high single pass gain device is required. …

Explanation Of Timing Jitter Mechanisms In Multisegment Mode-Locked Semiconductor Lasers, Dennis J. Derickson

Electrical Engineering

Multisegment mode-locked semiconductor lasers offer a simple, high performance solution for short pulse generation. Six mode-locking techniques used in multisegment mode-locked semiconductor lasers are shown. This paper concentrates on a theoretical explanation of the timing jitter mechanisms in these lasers with supporting experimental measurements. The analysis covers passive, hybrid, and active mode-locking techniques for both monolithic and external cavity devices. Timing jitter is a very important system consideration for most applications of mode-locked lasers.

Local Needs Implementation For All Programs, James G. Harris, Madeleine M. Johnson, Norm Rogers, Jay Waddell

Electrical Engineering

SYNTHESIS is one of four ex1sting NSF Engineering Education Coalitions (there are apparently plans to add two others this year to bring the total number to six). SYNTHESIS consists of eight universities: Cal Poly, Cornell. Hampton, Iowa State, Southern, Stanford, Tuskgekee, and UC-Berkeley. It has been supported by NSF for over three years, being one of the first two-the other being ECSEL. The other two existing coalitions are GATEVI/AY and SUCCEED. One 9f the main goals of the 'SYNTHESIS coalition is the development of the National Engineering Education Dehvery System (NEEDS). After giving a brief overv1ew of the NEEDS, we …

National Engineering Education Delivery System (Needs), Alice M. Agogino, Sheri Sheppard, Kate Mink, James G. Harris, Lawrence Genalo, Jaya Krishnagopalan, Dave Martin, John Saylor

Electrical Engineering

The Synthesis Coalition, supported by the National Science Foundation and industrial partners, is comprised of the following eight educational institutions: California Polytechnic State University at San Luis Obispo, Comell, Hampton, Iowa State, Southern, Stanford, and Tuskegee Universities, and the University of California at Berkeley (1].

The National Engineering Education Delivery System (NEEDS) is an entirely new courseware development and distribution system which will provide Widespread, rapid, electronic access to an almost arbitrarily large number of diverse instructional modules (2-4). Curricular material in the NEEDS database are organized by a diverse range of indices. Links across disciplines are provided in the …

Reduced Bandwidth For Remote Vehicle Operations, Timothy E. Noell, Fred W. Depiero

Electrical Engineering

Oak Ridge National Laboratory staff have developed a video compression system for low-bandwidth remote operations. The objective is to provide real-time video at data rates comparable to available tactical radio links, typically 16 to 64 thousand bits per second (kbps), while maintaining sufficient quality to achieve mission objectives. The system supports both continuous lossy transmission of black and white (gray scale) video for remote driving and progressive lossless transmission of black and white images for remote automatic target acquisition. The average data rate of the resulting bit stream is 64 kbps. This system has been demonstrated to provide video of …

Light-Emitting Diodes From Partially Conjugated Poly(P-Phenylene Vinylene), C. Zhang, David Braun, A. J. Heeger

Electrical Engineering

We report the effect of conversion conditions on the device characteristics of poly(p-phenylene vinylene) (PPV) light-emitting diodes. Both electroluminescence and photoluminescence intensities decrease with increasing degree of conversion. Partial conjugation enhances the electroluminescence intensity and gives an efficiency (with Ca as electron-injecting contact) as high as 0.75% photons per electron, about two orders of magnitude more efficient than from similar devices prepared from fully converted PPV. The results of constant current stress measurements suggest that the partially conjugated PPV diode is relatively stable at room temperature.

Analysis Of Laser Pulse Chirping In Mode-Locked Vertical-Cavity Surface-Emitting Lasers, Wenbin Jiang, Dennis J. Derickson, John E. Bowers

Electrical Engineering

Mode-locked vertical cavity lasers have a large cross-sectional area and consequently a large saturation energy and large peak powers. The authors analyze excess optical bandwidth generation in these lasers and find that self-phase modulation due to optical pumping and gain saturation is the dominant factor in inducing laser pulse chirping. The large magnitude of the chirp makes intracavity prism-pair compensation difficult. Adjustment of the cavity length has a major impact on the pulse chirping, as observed experimentally. Proper adjustment can result in a large linear frequency chirp which can be compensated using external pulse compression techniques

Semiconducting Polymer-Buckminsterfullerene Heterojunctions: Diodes, Photodiodes, And Photovoltaic Cells, N. S. Sariciftci, David Braun, C. Zhang, V. I. Srdanov, A. J. Heeger, G. Stucky, F. Wudl

Electrical Engineering

The characterization of rectifying heterojunctions (diodes) fabricated from a semiconducting polymer, a soluble derivative of poly(phenylene-vinylene), and buckminsterfullerene, C₆₀, are reported. Rectification ratios in the current versus voltage characteristics exceed 10⁴. When illuminated, the devices exhibit a large photoresponse as a result of photoinduced electron transfer across the heterojunction interface from the semiconducting polymer (donor) onto C₆₀ (acceptor). The photodiode and photovoltaic responses are characterized. Photoinduced electron transfer across the donor-accepted rectifying heterojunction offers potential for photodetector and for solar cell applications.

Nanosecond Transient Electroluminescene From Polymer Light-Emitting Diodes, David Braun, D. Moses, C. Zhang, A. J. Heeger

Electrical Engineering

The transient electroluminescence from polymer light-emitting diodes is reported. When the devices are mounted on a microstrip transmission line, the temporal response is limited by the electrode geometry, with rise and fall times below 50 ns. With low duty-cycle pulses (0.5%) the electroluminescence intensity remains proportional to the current at values up to 10 A/cm², two orders of magnitude greater than possible under direct current operation. Since the spectral blue-shift observed at high current levels (with power dissipation above 1 W/cm²) indicates significant sample heating, still higher levels should be possible with proper thermal management.

Stabilization Of Passively Mode-Locked Semiconductor Laser Repetition Frequency, Roger Helkey, Dennis J. Derickson, Alan Mar, John Wasserbauer, Robert L. Thornton

Electrical Engineering

No abstract provided.

Nsf Sponsored Innovation In Engineering And Cornputer Science, Jacob Abel, Patricia Daniels, James G. Harris, Harry Hedges

Electrical Engineering

No abstract provided.

Model For The Infrastructure Of Engineering Education, James G. Harris, Karen Frair, Win Aung, Susan T. Hill

Electrical Engineering

There are many ways to describe and model physical systems. The infrastructure of engineering education in the United States is an example of such a system, and it is the intent of this report to describe and model this infratructure. The means for doing this starts with the graduation statistics for the year 1989 given by the Computer Aided Science Policy Analysis & Research Database System (CASPAR) developed for the National Science Foundation by Quantum Research Corporation [1], and uses a simple categorization for the institutions that contribute to those statistics. This categorization sorts the post -secondary institutions in the …

Short Pulse Generation Using Multisegment Mode-Locked Semiconductor Lasers, Dennis J. Derickson, R. J. Helkey, A. Mar, Judy R. Karin, J. G. Wasserbauer, J. E. Bowers

Electrical Engineering

No abstract provided.

Waste-Surface Mapping Of The Fernald K-65 Silos Using A Structured Light Measurement System, B. L. Burks, Fred W. Depiero, M. A. Dinkins, J. C. Rowe, C. B. Selleck, D. L. Jacoboski

Electrical Engineering

During FY 1991, a remotely operated surface-mapping measurement system was developed by the Robotics & Process Systems Division at Oak Ridge National Laboratory for use in the K-65 waste-storage silos at Fernald, Ohio. The mapping system used three infrared line-generating laser diodes as illumination sources and three high-resolution, low-lux, calibrated, black-and-white, chargecoupled- device video cameras as receivers. These components were combined to form structured light source range and direction sensors with six different possible emitter-receiver pairs. A technology demonstration and predeployment tests were performed at Fernald during July and August 1991, using the empty Silo 4 into which was placed …

Repetition Frequency Stabilisation Of Passively Mode-Locked Semiconductor Lasers, R. J. Helkey, Dennis J. Derickson, A. Mar, J. G. Wasserbauer, J. E. Bowers, R. L. Thornton

Electrical Engineering

The repetition frequency of an external cavity mode-locked GaAs semiconductor diode laser has been stabilized by voltage controlled electrical feedback. The phase noise has been reduced by 40dB at 1 kHz offset from the carrier and timing jitter reduced from more than 30ps to 4ps. This technique can be used to stabilize millimetre-wave mode-locked lasers.

Mode-Locking Of High-Power Resonant-Optical-Waveguide Diode Laser Arrays, Alan Mar, Dennis J. Derickson, Roger Helkey, John Bowers, Dan Botez

Electrical Engineering

We report the first mode-locked operation of a resonant optical waveguide (ROW semiconductor laser array. Pulsewidths as short as 23 ps and peak powers of over 1W are generated in a single-lobed beam.

Remote Driving With Reduced Bandwidth Communication, Fred W. Depiero, Timothy E. Noell, Timothy F. Gee

Electrical Engineering

Oak Ridge National Laboratory has developed a real-time video transmission system for low-bandwidth remote operations. The system supports both continuous transmission of video for remote driving and progressive transmission of still images. Inherent in the system design is a spatiotemporal limitation to the effects of channel errors. The average data rate of the system is 64,000 bits/s, a compression of approximately 1000:1 for the black and white National Television Standard Code video. The image quality of the transmissions is maintained at a level that supports teleoperation of a high-mobility multipurpose wheeled vehicle at speeds up to 15 mph on a …