Electrical and Computer Engineering Commons^™

Characterization Of Poly-Si Thin Films Deposited By Magnetron Sputtering Onto Ni Prelayers, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A method of producing a polycrystalline silicon thin film on a foreign substrate without subsequent annealing has been developed. Thermally evaporated 5–100 nm thick Nifilms served as prelayers for magnetron sputtered Si thin films. A continuous film was obtained as a result of metal induced growth of polysilicon during low temperature (below 600 °C) deposition. The film uniformity is promising for large area device applications. The influence of the Ni prelayer thickness on the grain size of thus obtained films was investigated. Atomic force microscopy and cross-sectional scanning electron microscopy studies revealed features in the 150–600 nm size range while …

Bottom-Up Design Of Artificial Neural Network For Single-Lead Electrocardiogram Beat And Rhythm Classification, Srikanth Thiagarajan

Doctoral Dissertations

Performance improvement in computerized Electrocardiogram (ECG) classification is vital to improve reliability in this life-saving technology. The non-linearly overlapping nature of the ECG classification task prevents the statistical and the syntactic procedures from reaching the maximum performance. A new approach, a neural network-based classification scheme, has been implemented in clinical ECG problems with much success. The focus, however, has been on narrow clinical problem domains and the implementations lacked engineering precision. An optimal utilization of frequency information was missing. This dissertation attempts to improve the accuracy of neural network-based single-lead (lead-II) ECG beat and rhythm classification. A bottom-up approach defined …

Nonlinear Self-Organization In Photorefractive Materials, Partha P. Banerjee, Nickolai Kukhtarev, John O. Dimmock

Electrical and Computer Engineering Faculty Publications

This chapter discusses self-organization and its effects in optics. One of the most exciting and potentially useful areas of current research in optics involves the understanding and exploitation of self-organization in nonlinear optical systems. This self-organization may sometimes lead to the evolution of complex spatial patterns that can be regarded as the nonlinear eigenmodes of the system. Generation of these patterns is characteristically marked by the presence of intensity thresholds. In a nonlinear system with complicated temporal dynamics, it turns out that one cannot retain purity in spatial dimensionality. It is therefore equally important to investigate the dynamics of the …

Piezoelectric Doping In Alingan/Gan Heterostructures, M. Asif Khan, J. W. Yang, Grigory Simin, R. Gaska, M. S. Shur, A. D. Bykovski

Faculty Publications

We report on the piezoelectricdoping and two-dimensional (2D) electron mobility in AlInGaN/GaN heterostructures grown on 6H–SiC substrates. The contribution of piezoelectricdoping to the sheet electron density was determined using an In-controlled built-in strain-modulation technique. Our results demonstrate that in strained AlGaN/GaN heterostructures, the piezoelectric field generates at least 50% of the 2D electrons. The strain modulation changes the potential distribution at the heterointerface, which, in turn, strongly affects the 2D electron mobility, especially at cryogenic temperatures. The obtained results demonstrate the potential of strain engineering and piezoelectricdoping for GaN-based electronics.

Low-Frequency Noise In N-Gan With High Electron Mobility, M. E. Levinshtein, S. L. Rumyantsev, D. C. Look, R. J. Molnar, M. Asif Khan, Grigory Simin, V. Adivarahan, M. S. Shur

Faculty Publications

We report on the results of measurements of low frequency noise in n-type gallium nitride (GaN) grown on sapphire with 300 K electron mobility of 790 cm²/V s. The noise spectra have the form of 1/f noise with a Hooge parameter α of approximately 5×10⁻². This value of α is two orders of magnitude smaller than that observed before in n-GaN. The obtained results show that the level of flicker noise in GaN, just like that in GaAs and Si, strongly depends on the structural perfection of the material (the amplitude of the 1/f …

A Translation And Rotation Independent Fingerprint Identification Approach, Hongyu Wang

Graduate Theses - Electrical and Computer Engineering

This thesis describes a new approach for fingerprint identification that will be shift and rotation independent. Detailed descriptions of directional filtering, foreground and background segmentation, feature extraction, and matching based on structural correlation are the main topics of this thesis. The fingerprint identification system consists of image preprocessing, feature extraction, and matching which run on a PC platform. The preprocessing step includes histogram equalization, block-based directional filtering, thinning, and adaptive thresholding to enhance the original images for successful feature extraction. The features extracted will be stored in the database for matching. The matching algorithm presented is a modification and improvement …

Guest Editorial: Special Section On Acousto-Optic Devices And Optical Information Processing: Research And Developments, Partha P. Banerjee, Ting-Chung Poon

Electrical and Computer Engineering Faculty Publications

This guest editorial provides an overview of the topical area and an introduction to the articles featured in the special section.

Laser Beam Profile Deformation Effect During Bragg Acousto-Optic Interaction: A Non-Paraxial Approximation, Ray S. Huang, Chen-Wen Tarn, Partha P. Banerjee, Doungchin Cao

Electrical and Computer Engineering Faculty Publications

It is commonly known that the spatial profiles of the diffracted light beams during Bragg acousto-optic interaction are distorted due to the Bragg angle selection mechanism. All the conventional studies on this effect use the paraxial approximation. But this approximation should be amended when the incident angle of the light is large enough that the diffracted light waves do not propagate closely along the optic axis of the acousto-optic diffraction system. By using a spatial Fourier transform approach, we rigorously study the light beam profile deformation effect of the diffracted light during the Bragg acousto-optic interaction beyond the paraxial approximation. …

Examination Of Beam Propagation In Misaligned Holographic Gratings And Comparison With The Acousto-Optic Transfer Function Model For Profiled Beams, Monish Ranjan Chatterjee, David D. Reagan

Electrical and Computer Engineering Faculty Publications

A transfer function formalism developed earlier for the propagation of profiled optical beams through acousto-optic Bragg cells is revisited and applied to a thick holographic grating. The results based on the holographic coupled wave model and the acousto-optic multiple scattering model are shown to be compatible, and equivalent parameters such as the Q and grating strength are defined for the two systems. Results for a Gaussian spatial profile are numerically computed and compared. For the holographic grating, a profiled beam may be interpreted as an angular misalignment or Bragg-angle mismatch problem. The case of Bragg-wavelength mismatch is also investigated for …

Self-Enhancement Of Dynamic Gratings In Photogalvanic Crystals, Nickolai Kukhtarev, Sergei F. Lyuksyutov, Preben Buchhave, Tatiana Kukhtareva, K. Sayano, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

We have developed a compact closed-form solution of the band transport model for high-contrast gratings in photogalvanic crystals. Our solution predicts the effect of the photoconductivity and the electric field grating enhancement due to the photogalvanic effect. We predict a pronounced dependence of the steady-state photogalvanic current on the contrast of the interference pattern and an increase of holographic storage time due to the enhancement of the photoconductivity grating contrast. In the high contrast limit and a large photogalvanic effect the refractive index grating will be shifted from the position of the intensity modulation pattern, contrary to the usually adopted …

Deriving Of Single Intensive Picosecond Optical Pulses From A High-Power Gain-Switched Laser Diode By Spectral Filtering, S. N. Vainshtein, Grigory Simin, J. T. Kostamovaara

Faculty Publications

Single 25 ps/16 W optical pulses were achieved by spectral filtering from a multiheterostructure gain-switched laser diode with its quasisteady-state modes suppressed by a factor of 10³ as compared with the peak power. A significant transient spectrum broadening makes this possible provided that a very high dI/dt rate of the pumping current pulse is used. A simple numerical model is suggested which describes adequately both the spectral and transient features of the observed phenomenon. It follows from the model that single picosecond optical pulses can be obtained from any type of high power semiconductor laser.

Experimental Investigations Of Wavelength And Angular Errors In Holographic Gratings With Non-Bragg-Matched Read Beams, Monish Ranjan Chatterjee, Vivek Ray

Electrical and Computer Engineering Faculty Publications

Perfect Bragg matching is generally desirable for accurate optical interconnections with holographic gratings. In reality, however, gratings may be illuminated by READ beams with non-Bragg-matched angles, or wavelengths, or both. In such cases, the scattered beams are generally misdirected, and may suffer loss of efficiency and possibly more serious errors such as crosstalk noise or missed connections. A conventional wave-vector triad method of analyzing the scattered beam errors leads readily to near-Bragg estimates of the output angular misalignment. However, the READ wave-vector triads appear to indicate a possible wavelength shift in the output beam even with a Bragg-matched READ wavelength, …

Joint Wavelet Transform Correlation With Separated Target And Reference Planes, Boon Yi Soon, Mohammad A. Karim, Russell C. Hardie, Mohammad S. Alam

Electrical and Computer Engineering Faculty Publications

In recent years, we realize the usefulness of feature extraction for optical correlator and hereby, we investigate the capability of Laplace operator in feature extraction of multiple targets. The first-order terms and the false alarm terms in the correlation output would be removed using electronic power spectrum subtraction technique. Most importantly, the entire magneto-optic SLM is completely utilized for displaying only targets in the input scene. A new cost efficient hardware implementation is proposed and aforementioned result of the proposed system is evaluated through computer simulation.

High-Resolution Image Reconstruction From A Sequence Of Rotated And Translated Frames And Its Application To An Infrared Imaging System, Russell C. Hardie, Kenneth J. Barnard, John G. Bognar, Ernest E. Armstrong, Edward A. Watson

Electrical and Computer Engineering Faculty Publications

Some imaging systems employ detector arrays that are not sufficiently dense to meet the Nyquist criterion during image acquisition. This is particularly true for many staring infrared imagers. Thus, the full resolution afforded by the optics is not being realized in such a system. This paper presents a technique for estimating a high-resolution image, with reduced aliasing, from a sequence of undersampled rotated and translationally shifted frames. Such an image sequence can be obtained if an imager is mounted on a moving platform, such as an aircraft. Several approaches to this type of problem have been proposed in the literature. …

Fuel Cells, Frederick J. Munster Jr.

Maine Collection

Fuel Cells

by Frederick J. Munster Jr.

Edited by: Mr. Christopher Carroll

Maine Department of Economic Development, Augusta, Maine, 1998.

Contents: Hydrogen / Hydrogen Safety / Electrolysis / Electrolyzers / History of Fuel Cells / How Fuel Cells Operate / Fuel Cell Types / Fuel Cell Electrochemistry / Power Systems / Fuel Cells in Transportation / Hydrogen Powered Internal Combustion Engines / Home, Garden, Education and Industry / For More Information / Glossary / References

Attitude Measurement, Mark A. Stedham, Partha P. Banerjee, Seiji Nishifuji, Shogo Tanaka

Electrical and Computer Engineering Faculty Publications

In many practical situations, it is important to determine and measure the attitude of a particular vehicle, such as a ship, an airplane, a piece of mechanical equipment such as a, crane lifter, or a spacecraft. For this reason, many attitude sensors have been developed with advanced computer and semiconductor technologies. This section first introduces the various attitude sensors with an explanation of their operating principles and then presents several methodologies for attitude measurement and determination, including ships and crane lifters, aircraft, and spacecraft applications.

Optimal Block Encoding And Optimal Entropy For Lossless Image Compression, Larry Ray Dennis

Dissertations and Theses

In this thesis, a novel approach is designed using a quad-tree stack structure to encode the image to determine the optimal block size at the optimal and effective entropy in the lossless image compression method. Proof is given through encoding of the predictor and randomly constructed planes. There is a high degree of relationship between the placement of bits in the planes. Clearly results shows that use of the optimal entropy and encoding block sizes will increase the compression ratio using the lossless method. The cost of using the block size methods to encoding and entropy is discussed and proven. …

A Simplified Approach To Reduce Blocking And Ringing Artifacts In Transform-Coded Images, Jianping Hu

Dissertations and Theses

Presently Block-based Discrete Cosine Transform (BDCT) image coding techniques are widely used in image and video compression applications such as JPEG and MPEG. At a moderate bit rate, BDCT is usually a quite satisfactory solution to most of practical coding applications. However, for high rate compression it produces noticeable blocking and ringing artifacts in the decompressed image. It has been an active research area for a decade for reducing these artifacts. In this thesis, a novel post-processing algorithm is proposed to remove the blocking and ringing artifacts at low bit rate. It is non-iterative and uses both spatial and transform …

A Stochastic Model For Crystal-Amorphous Transition In Low Temperature Molecular Beam Epitaxial Si(111), R. Venkatasubramanian, Suresh Gorantla, S. Muthuvenkatraman, Donald L. Dorsey

Electrical & Computer Engineering Faculty Research

Molecular beam epitaxial Si (111) grown below a certain temperature result in amorphous structure due to the limited surface mobility of atoms in finding correct epitaxial sites. In spite of many experimental and theoretical studies, the mechanism of crystal‐amorphous transition and its dynamics related to the growth conditions are not well understood. In this article, we present a theoretical model based on the formation of stacking fault like defects as a precursor to the amorphous transition of the layer. The model is simulated based on a stochastic model approach and the results are compared to that of experiments for temperatures …

Extended Permutation Filters And Their Application To Edge Enhancement, Russell C. Hardie, Kenneth E. Barner

Electrical and Computer Engineering Faculty Publications

Extended permutation (EP) filters are defined and analyzed. In particular, we focus on extended permutation rank selection (EPRS) filters. These filters are constrained to output an order statistic from an extended observation vector. This extended vector includes N observation samples and K statistics that are functions of the observation samples. The rank permutations from selected samples in this extended observation vector are used as the basis for selecting an order statistic output. We show that by including the sample mean in the extended observation vector, the filters exhibit excellent edge enhancement properties. We also show that several previously defined classes …

Low-Frequency Noise In 4h-Silicon Carbide Junction Field Effect Transistors, J. W. Palmour, M. E. Levinshtein, S. L. Rumyantsev, Grigory Simin

Faculty Publications

Low frequency noise in 4H‐silicon carbide junction field effect transistors (JFETs) has been investigated. JFETs with a buried p ⁺ n junction gate were manufactured by CREE Research Inc. Very low noise level has been observed in the JFETs. At 300 K the value of Hooge constant α is as small as α∼10⁻⁵ and the α value can be decreased by an appropriate annealing to α∼2×10⁻⁶. It has been shown that even these extremely low noise values are determined not by the volume noise sources but by the noise at the SiC–SiO₂ interface.

Translation Of 'Profiles In Faith', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

Sarat Chandra Chatterjee (1876-1938) may be considered one of the three most significant figures of the literary component of the Bengal Renaissance, the other two being Bankim Chandra Chatterjee (1838-1894) and Rabindranath Tagore (1861-1941). As much as Bankim Chandra is identified with the new age in the Bengali novel, and the development of serious vernacular journalism, and Rabindranath with modern/classical movements in Bengali poetry and music, along with novel ideas in methods of education and teaching, Sarat Chandra, as a novelist and storyteller, perfected the art of narration and critical analyses of a variety of contemporaneous social and political issues, …

Broadband Dynamic, Holographically Self-Recorded, And Static Hexagonal Scattering Patterns In Photorefractive Knbo3:Fe, Nickolai Kukhtarev, Tatiana V. Kukhtareva, John Caulfield, Partha P. Banerjee, Hsueh-Ling Yu, Lambertus Hesselink

Electrical and Computer Engineering Faculty Publications

We have observed and explained three types of hexagon pattern formation in photo refractive crystal KNb03:Fe. These are:

• Dynamic (laser induced)
• Semipermanent (holographically stored)
• Permanent (induced by a static domain grid) over a wide wavelength range

Transient Wave Mixing And Recording Kinetics In Photorefractive Barium Titanate: A Nonlinear Coupled Mode Approach, Partha P. Banerjee, John M. Jarem

Electrical and Computer Engineering Faculty Publications

By using rigorous coupled-wave diffraction theory along with a time-dependent nonlinear formulation, we analyze two- and multiplewave coupling and the grating kinetics in BaTi03 with different boundary interfaces. Efffects of electrostatic and optical anisotropy have been included in the analysis. Significant mode conversion to higher orders is observed only when the boundary interfaces are highly mismatched.

Guest Editorial: Special Section On Photorefractive Nonlinear Optics, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Hand in hand with experimental work in photorefractives, there is a lot of activity in modeling photorefractive materials and experimental observations in the open literature. This special section contains a paper by Banerjee and Jarem, who use a rigorous coupled wave theory to analyze two- and multiple-wave mixing photorefractive barium titanate, modeled through the Kukhtarev equations.

Low Cost Schottky Barrier Solar Cells Fabricated On Cdse And Sb2S3 Films Chemically Deposited With Silicotungstic Acid, O. Savadogo, K. C. Mandal

Faculty Publications

No abstract provided.

Comparison Of High-Temperature Superconductors In Multi-Chip Module Applications, D. E. Ford, S. S. Scott, S. S. Ang, W. D. Brown

Journal of the Arkansas Academy of Science

In the application of high-temperature superconductors (HTSCs) in multi-chip module (MCM) technology, it is first necessary to investigate the advantages and disadvantages of the various HTSC compounds. The standard criteria for comparing the suitability of HTSCs in electronics applications has been critical temperature (Tc )and critical current density (Jc ). It is also necessary to consider the physical properties of HTSCs in relation to the various processing techniques required in fabrication of MCMs. These techniques can be grouped into four main areas: deposition, patterning, packaging, and characterization. The four main HTSC materials, Y-Ba-Cu-O, Bi-Sr-Ca-Cu-O, Tl,Ba-Ca-Cu-O and Hg-Ba-Ca-Cu-O, will be compared …

Electronic Simulation Of The Temporal Characteristics Of Photon Memory Echoes And Some Related Applications, Yuwen Kuo, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

The characteristics of nonlinear photon memory echoes are investigated by means of SPICE simulations using equivalent resonator ensembles. By developing implicit nonlinear circuit models in the memory echo domain, the triple product formalism of electronic holography, involving correlation and convolution, is tested for the storage and recall of arbitrary signals and/or data bit streams in both time-inverted and nontime-inverted modes. Furthermore, a few specific optical data processing applications are also simulated in which the mixed binary multiplication of two or more binary bit streams is achieved.

Higher order products, optical pattern recognition, and other possible applications are also discussed. It …

Multiple Sample Cryostat For The Determination Of Superconductor Properties, G. Burnside, Roger M. Hawk, Paul C. Mcleod

Journal of the Arkansas Academy of Science

Cryostats which are currently used to characterize the properties of superconductors between 4 K and 100 K are primarily single sample devices. The purpose of this paper is to present an instrument design which can hold up to five (5) one cm. diameter samples at a stable temperature (+ /-0.1K) within the above range specified while measurements of the sample properties are made.

Sputter Deposition And Thallination Of Ti-Ba-Ca-Cu-O Superconducting Thin Films, T. H. Dhayagude, S. S. Ang, W. D. Brown

Journal of the Arkansas Academy of Science

Thallination techniques used for the fabrication of sputter-deposited TI2Ba2CaCu 2Ox and TI2Ba2Ca2Cu3Ox superconducting thin films were investigated. Differences in elemental composition of precursor Ba-Ca-Cu-O sputtering targets were found to yield different superconducting phases. Thallination conditions which yielded transition temperatures as high as 122 K for samples annealed in air are described. Finally, reactive ion etching of films using a mixture of chlorine and argon gases is discussed.