Electrical and Computer Engineering Commons^™

Development Of Fire Prediction And Prevention Digital System Algorithms, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

This research work is devoted to the development of algorithms for a digital system aimed at early detection, prediction and prevention of fire hazards. In the work, the process of fire hazard assessment is modeled on the basis of modern information technologies and artificial intelligence tools. The main focus is on collecting data in real time, analyzing it and creating algorithms that determine the level of danger. In the process of research, methods of data cleaning, normalization and determination of correlation between variables were used to process multidimensional data streams obtained from various sensors (temperature, smoke, gas concentration and humidity …

Algorithms For The Synthesis Of A Temperature Control System For The Inner Tube Heat Exchanger With A Steam Jacket, H.Z. Igamberdiyev, Jasur Sevinov, U.F. Mamirov, Sh.M. Abdishukurov

Chemical Technology, Control and Management

The synthesis of a feedback propagation control law for an inner tube heat exchanger with a steam jacket is addressed in this text. A controller has been developed that, based on temperature measurements taken at four points. The maintains the output temperature at a specified level by acting on the steam jacket temperature. To determine the parameters of the plant, a linear quadratic optimal (LQ-optimal) algorithm is employed. In the considered case, the optimal controller includes a proportional–integral (PI) component, as well as an additional term that requires storing the control input over the current interval for its computation. The …

Intelligent Method Of Dynamic Control For A Class Of Stochastic Nonlinear Systems, Isamidin Khakimovich Siddikov, Davronbek Abdalimovich Khalmatov, Gulchekhra Rakhimjanovna Alimova, Dilnoza Rakhmanovna Khushnazarova

Chemical Technology, Control and Management

The paper considered the problems of researching the stabilisation system and backstepping control of stochastic nonlinear systems. The characteristics of stochastic nonlinear dynamic control systems are random signals with normal lawful distribution, which significantly complicates task control. In stochastic control, it is necessary to determine the trajectories of the control variables in order to achieve the desired control objective at minimum cost. Since the mathematical equations of stochastic nonlinear systems are not always constant, not every model-based controller can be accurate. Therefore, in this work, a neuro-fuzzy network is used to evaluate the parameters of the control system with backstepping, …

Reinforcement Learning In A Virtual World: A Study Of Ppo And Sac Within Unity Ml Agents, Rufat Mammadzada

Chemical Technology, Control and Management

This study explores the use of Unity3D as a versatile platform for developing, training, and evaluating intelligent agents through reinforcement learning. Leveraging the Unity ML-Agents Toolkit, a dynamic 3D environment was created to examine agent learning behavior using two advanced algorithms: Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC). The simulation environment consisted of navigable terrain bounded by red borders, with collectible blue balls serving as rewards and a purple cube representing the agent. A carefully designed reward system was implemented to encourage goal-directed behavior and penalize inefficiency, while time constraints introduced an additional challenge requiring both precision and speed. …

Adoption Of Agrivoltaics In Developing Countries: A Review On Challenges, Opportunities And Future Prospects, Abdi J. Athumani, Pater Makolo

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a review of agrivoltaics technology and how it has been applicable in developing countries, including African countries. Agrivoltaics, the integration of agricultural production with photovoltaic energy generation, offers promising solutions to water- energy-food nexus in developing countries. This technology offers the dual benefit of increasing agricultural productivity while generating clean energy, which is very important for regions facing frequent electricity shortages and declining agricultural yields due to climate change. However, despite its potential, the adoption of agrivoltaics in developing nations remains limited in comparison to developed countries due to financial, technical and policy constraints. This paper explores …

Resilience Engineering Via Bifurcation And Ecological Network Analysis: Demonstrated In An Electric Power Case Study, Rogelio Gracia Otalvaro

Doctoral Dissertations and Master's Theses

Modern systems are increasingly complex, interconnected cyber-physical systems that combine digital controls with physical infrastructure. This integration, along with the constant introduction of new technologies and actors into the network, enables reliable operation but introduces vulnerabilities to unexpected and varied disruptions and cascading failures, making resilience a critical concern. Traditional risk management and resilience assessment methods often struggle with the nonlinearity and dynamic behavior of these systems. This dissertation proposes a novel approach combining Bifurcation Analysis (BA) and Ecological Network Analysis (ENA) to enhance the understanding and improvement of system resilience. BA, a mathematical method from dynamical systems theory, is …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

Optimizing Beer Fermentation Through Intelligent Control, Azizbek Nodirbekovich Yusupbekov, Mirjalol Yusupov

Chemical Technology, Control and Management

This paper presents an intelligent control approach for optimizing the beer fermentation process using fuzzy logic and adaptive neuro-fuzzy inference systems. By incorporating multivariable inputs—temperature error and pH deviation—the proposed system effectively handles the nonlinear dynamics and biological variability inherent in fermentation. Simulation results demonstrate improved control accuracy, responsiveness, and robustness compared to conventional methods, making the approach suitable for integration in modern brewery automation systems.

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Increasing The Robustness Of A Control System For A Complex Dynamic Plant By Correcting Nonlinearity In The Warping Process, Tukhtamurod Khayitmurodovich Avezov, Zokhid Ergashboyevich Iskandarov

Chemical Technology, Control and Management

The paper discusses the challenges of enhancing the robustness of a control system for a complex dynamic plant by addressing nonlinearity in the warping process. Devices that ensure the stability of the control system against parameter non-stationarity on the warping machine are referred to as state controllers. The operating principle of these devices relies on providing artificial nonlinearity to the rear connection circuit of the control system's actuator. However, this nonlinearity is implemented using components that consider the parameters of low control quality. Therefore, it is necessary to continuously adjust the nonlinearity parameters to, on one hand, reduce the load …

Evaluation Of Deep Learning Techniques In Road Sign Recognition, Latafat Abbas Gardashova, Haji Fakhraddin Hajiyev

Chemical Technology, Control and Management

Deep learning has transformed the computer vision field and greatly improved the performance and efficiency of road sign recognition systems. This research compares different deep learning methods, such as Convolutional Neural Networks (CNNs), Recurrent Neural Networks (RNNs), and hybrid models, in terms of their ability to effectively detect and classify road signs under various conditions. The study compares performance measures such as accuracy, processing speed, and robustness to environmental conditions like low lighting, occlusion, and adverse weather. The results show that CNN-based methods, especially those with transfer learning and ensemble techniques, have better performance in real-time scenarios. Problems like computational …

Modern Methods Of Self-Monitoring, Diagnostics, And Fault Tolerance In Flow Measurement Systems, Elbek Ortiqov

Chemical Technology, Control and Management

This article investigates various methods and tools for self-monitoring and fault tolerance in flow measurement transducers used in industrial processes. The study focuses on key techniques such as the use of redundancy, generation of reference values, analysis of measurement signals, and control of disturbance variables. These methods allow transducers to detect potential faults, ensure reliable operation, and maintain measurement accuracy even under adverse conditions. The article highlights how self-monitoring contributes to improving system safety, increasing reliability, and reducing downtime. It also discusses the integration of intelligent monitoring systems that support predictive maintenance and real-time diagnostics. Fault-tolerant sensors with self-monitoring capabilities …

Finding The Shortest And Optimal Path With Metaheuristic And Madm Methods, Narmin Ibrahim Hasanli

Chemical Technology, Control and Management

The article had described a method for finding the shortest and most optimal path among cities. The data had been taken from the TSPLIB library, which had provided standard examples for the Traveling Salesman Problem. This approach had integrated the advantages of the meta-heuristic technique and the Multi Attribute Decision Making method to solve the problem effectively. In the first stage, the population based meta-heuristic method ACO (Ant Colony Optimization) had found optimal solutions in large search spaces. The use of pheromone trails, heuristic information and an iterative search process had given the opportunity to find the best or near-best …

Modeling Of Urea Drying And Granulation Process In Fluidized Bed, Jalolitdin Pakhritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

This article is devoted to the mathematical modeling of urea drying and granulation processes in a fluidized bed. A brief description is provided for the functional blocks included in the mathematical model, along with the required parameters that form an integrated representation of the technological process. The SR-POLAR model is used to describe a phase equilibrium between the components involved. The interconnections between functional blocks are shown in the process flow diagram. Block diagrams for modeling a multi-chamber granulation unit and the cooling system for the resulting granules are presented. Granule growth in the fluidized bed is described using a …

Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article investigates methods for assessing soil salinity levels based on satellite (remote sensing) imagery and their calculation algorithms. Determining the degree of salinity plays a crucial role in the rational use of land resources and increasing agricultural efficiency. The study analyzes indices for determining soil salt content using remote sensing technologies, particularly multispectral images obtained from satellite systems such as Landsat and Sentinel (for example, SI - Salinity Index, NDVI - Normalized Difference Vegetation Index, and others). Furthermore, algorithms are developed based on these indices that enable automatic determination of salinity assessments. Artificial intelligence, machine learning, and geographic information …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.

Synthesis Of A Control System For Thermal Energy Facilities Using The Quantum Photon Spin Method, Isomiddin Siddikov, N.S Yakubova

Chemical Technology, Control and Management

Increasing energy efficiency and reducing fuel consumption in the process of generating electricity and heat at thermal power plants is one of the urgent tasks. Such systems operate under conditions of random changes in external and internal influences, as well as measurement uncertainties, which reduce the quality of control. In order to overcome this problem, it was proposed to develop an intelligent control system using the quantum photon-spin method to control technological units of thermal power plants. In the proposed approach, a multi-dimensional heating boiler device was taken as a control object, and the simulation modeling of the control system …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Scalable And Adaptive Agile Framework For Semiconductor Foundry: Advanced Packaging And Heterogeneous Integration Perspective, Pravin Thorat

Harrisburg University Dissertations and Theses

This research addressed the critical requirement for a scalable and adaptive agile framework specifically designed for the unique demands of semiconductor foundries specializing in advanced packaging and heterogeneous integration (HI). The semiconductor industry was encountering growing pressure to innovate and respond quickly to rapidly evolving demands, yet traditional manufacturing processes often struggled to adapt. Existing agile frameworks, mainly developed for the software industry, lacked the necessary adaptations to address the complexities of semiconductor manufacturing, including extended lead times, high capital investment, rigorous quality requirements, and the integration of various technologies. This research gap hindered the ability of semiconductor foundries to …

Human Comfort Modeling, Measurement, And Improvement In Human–Robot Collaboration, Yuchen Yan

All Dissertations

A dissertation is proposed to explore human comfort in human-robot collaboration (HRC) through modeling, prediction, and enhancement methodologies. Human comfort is a crucial yet underexplored factor in HRC, directly influencing task efficiency, trust, and overall collaboration effectiveness. Understanding the influential factors, developing computational models, and refining methods to improve human comfort in HRC are essential steps toward advancing the field of collaborative robotics. To address these challenges, multiple studies have been conducted. A series of experimental studies were performed to investigate how robot motion-based parameters affect human comfort in HRC. These studies examined both analytical comfort modeling approaches and physiological …

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

Algorithms For Combined Regular Synthesis Of Controller Parameters In Control Systems For Dynamic Objects, Khusan Zakirovich Igamberdiev, Latafat Abbas Gizi Gardashova, Yulduz Mukhtarkhodjayevna Abdurakhmanova, Uktam Farkhodovich Mamirov

Technical science and innovation

Nonlinear control system that includes m-dimensional input control signal and extended (n+s) - dimensional state vector, the last s components of which form a vector of unknown parameters θ satisfying a general difference equation is being considered. The quality criterion is determined by the loss function. The optimal control must satisfy the Bellman equation with respect to the optimal loss function. To be defined an approximate solution that preserves an active use of information. For this purpose, the system is linearized in accordance to the nominal trajectory. This problem is seen as incorrectly stated. The values of the preliminary data …

Design Of Automation For The Absorption Process In Hydrogen Purification From Carbon Dioxide, Azizbek Nodirbekovich Yusupbekov, Saidamirkhon Oripov, Diyoraxon Zokirxon Qizi Oripova

Chemical Technology, Control and Management

This article discusses the automation of the methanol-acetone mixture absorption process to improve control efficiency. The existing local automatic control system (ACS) was upgraded to a cascade system, reducing component concentration deviations by 12% and decreasing the transition process time from 1606 to 1592 seconds. A mathematical model of the gas absorption process was developed, incorporating material balance equations, mass transfer equations, and transfer functions. The parameters of the PI controller were calculated to ensure system stability under ±10% coefficient variations. A comparative analysis of system characteristics before and after modernization confirmed a reduction in overshoot to 0% and an …

Optimisation Of Astatic Controllers In Automatic Control Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

This article examines the influence of various factors on the efficiency of optimizing station controllers in automatic control systems. The main focus is on minimizing static errors and improving the reliability of controllers. Optimization methods for PID and PI²D controllers are discussed, including the use of modern approaches such as genetic algorithms. The necessity of compromise solutions to achieve high-quality system responses to various impacts is investigated. It was also suggested that there is a need for an integrated approach to setting up controllers in order to increase their reliability and flexibility in conditions of dynamically changing processes. …

Energy Conversion In Nuclear Batteries, Suhrob Vahob O'G'Li Ibrohimov

Chemical Technology, Control and Management

The transformation of energy in nuclear reactors or processes involves converting mass into energy as a result of nuclear reactions. This can include nuclear fission (splitting heavy atomic nuclei) or nuclear fusion (combining light nuclei). In these processes, energy is released in the form of heat, which can be used for electricity generation or other purposes.

Modeling Of Carbonization And Absorption Processes In Soda Ash Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fatima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The article considers the problem of modeling the ammonia-soda process of soda ash production and presents the chemistry of sodium bicarbonate (NaHCO₃) formation. The equation of the kinetics of the reaction, used as a model of the carbonation process, is derived from a system of equations and its computer model is compiled. The system of differential equations reflecting the kinetics of the process was solved in the Mathcad package. The result of the modeling is presented. Based on the experimental data, the dependence of the absorption column performance on temperature and the dependence reflecting the optimal value of the absorption …

A Smart System For Detecting Anatomic And Histological Symptoms Of Diseased Agricultural Plants, Rustam Baratov, Himola Sunnatillayeva, Alimardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This study describes a novel agricultural plant disease detecting smart system, capable of handling measured plant body parameters and images received by high resolution camera at the same time. The proposed plant disease detection method is based on evaluation of the signals received by measured and controlled plant body physical parameters like resistance, temperature and capacitance of the plant stem and image processing. An analogue plant model based on an electrical circuit with distributed parameters was developed. In addition, in the article the block diagram of the smart system for the early detection of plant diseases, the circuit diagram, its …

The Importance Of The Analog-To-Digital Converter In The Measurement System, Aliev Ravshan, Anvar Djalilov

Chemical Technology, Control and Management

At the moment, many scientific researches are being conducted all over the world on the economical use of water and energy resources. Most of the scientific research works are aimed at improving measurement techniques and technologies, that is, increasing their accuracy. With this in mind, a high-precision analog-to-digital converter due to its unique metrological and technical characteristics was studied in this research paper. As a result of the study, it became clear that the use of a small-sized, high-precision sigma-delta analog-to-digital converter in modern measuring technology has a positive effect on its accurate and efficient operation.

Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat

Chemical Technology, Control and Management

This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.

Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater, Alisher Khudoyberdi Ugli Rakhimov, Hasan Siddiq Ugli Murodov, Farrukh Bakhtiyorovich Igitov, Shuhrat Ahmadjonovich Mutalov, Jaloliddin Abdurazzakovich Eshbobaev

Chemical Technology, Control and Management

The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated …