Electrical and Computer Engineering Commons^™

Review Of Modern Methods For Identification, Forecasting, And Intelligent Control Of Wastewater Biological Treatment Processes, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon O'G'Li Mannobjonov

Chemical Technology, Control and Management

This article presents a comprehensive review of contemporary approaches to the automation and intelligent control of wastewater biological treatment processes. Particular emphasis is placed on the digitalisation of wastewater treatment plants, ranging from the implementation of automated process control systems (APCS/SCADA-based solutions) to the application of predictive algorithms and the development of digital twins of bioreactors.

Special attention is devoted to mathematical models that underpin the control of bioprocesses. The evolution of the most widely used activated sludge models—ASM1, ASM2d, and ASM3—is examined, as these models describe key processes such as microbial community growth, nitrification, denitrification, and phosphorus removal. It …

A Capability Maturity Model For Artificial Intelligence Integration In Supply Chain Management, Lordt Becklines

Dissertations

Artificial Intelligence (AI) is transforming Supply Chain Management (SCM), yet many organizations struggle to assess their readiness for AI adoption and to understand how AI capabilities develop across maturity stages. This dissertation addresses this gap by developing a Capability Maturity Model (CMM) for AI integration in SCM, grounded in Organizational Information Processing Theory (OIPT), the Resource-Based View, and related capability frameworks. The model provides a structured approach for evaluating an organization's information-processing requirements, resource configurations, and alignment needed for effective AI-enabled supply chain operations.

Using a design science research approach, the AI-SCM CMM and its associated assessment instrument were derived …

A. Vs. I In Ai: Is There A Threshold To "Engineered" Intelligence?, Joshit Mohanty

Engineering Management & Systems Engineering Faculty Publications

Despite artificial intelligence reshaping the world, its development generates uncertainties regarding future capabilities. AI simultaneously exists as an artifact of engineering design and as autonomous intelligence, creating an observer-participant feedback loop. This paper proposes that embodied AI faces a bandwidth-limited intelligence threshold T_h that it arises from B = min(C_sens,C_Act). However, Shannon capacity measures bits while intelligence operates on concepts, necessitating a dual-channel model separating physical bandwidth B_io from representational capacity B_rep. Intelligence emerges as multi-dimensional rather than scalar, with components exhibiting different bandwidth dependencies. Surpassing T_h requires either new sensing methods expanding B, enhanced representational frameworks, or reconceptualization within …

Generalized Inverter Fault Detection Using Normalized Current Features And A Lightweight Bilstm Network, Mohammad Zamani Khaneghah, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

Fault detection and diagnosis of three-phase inverter-fed motor drives is essential for ensuring system reliability, safety, and continuous operation in applications such as electric vehicles and industrial automation. This paper proposes a data-driven fault detection framework based on normalized current features and a lightweight bidirectional long short-term memory (BiLSTM) network which can be generalized to different motor power rating in the same controller system. A compact set of six time-domain features, consisting of the mean and root-mean-square (RMS) values of the phase currents, is extracted and normalized with respect to the average RMS value. This normalization effectively removes dependency on …

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut

Engineering Technology Faculty Publications

As the urgency to address climate change and modernize energy infrastructure grows, the building sector plays a key role in improving energy efficiency and reducing carbon emissions. This study evaluates five energy retrofit strategies for Building 101 at The Navy Yard in Philadelphia, comparing two real-world proposals from energy service companies with three simulation-based packages derived from Building Energy Simulation (BES) tools. The study examined whether advanced BES tools provide greater accuracy and decision-making value compared to simpler alternatives. Electricity savings ranged from 5 % to 40 %, gas savings from 29.7 % to 61 %, and annual cost reductions …

Generative Ai And Llm Applications In Renewable Energy And Smart Grids: A Systematic Review For The Sustainable Energy Transition, Umit Cali, Ugur Halden, Merlinda Andoni, Ferhat Ozgur Catak, Si Chen, Benoit Couraud, Emre Kantar, Samuel Knapper, Ibrahim Kucukdemiral, Huseyin Kusetogullari, Murat Kuzlu, Yashar Mousavi, Sonam Norbu, Taha Selim Ustun, David Flynn

Engineering Technology Faculty Publications

The global energy transition toward decarbonization and digitalization requires advanced methods to manage decentralized, data-intensive cyber-physical energy systems. This systematic review analyzes 106 research studies on Generative Artificial Intelligence (GenAI) and Large Language Models (LLMs) in renewable energy and smart grids, organized into seven application clusters covering forecasting, system design, operation, reliability, data and cybersecurity, and energy markets. The review situates these applications within a Cyber-Physical-Social Systems (CPSS) framework. Results show that GANs dominate current applications (47.2%), followed by LLMs (10.4%) and VAEs (9.4%), with growing adoption of diffusion and score-based models (7.5% each). Selected studies report improved probabilistic forecasting …

Improving Medical Diagnostics With Vision-Language Models: Convex Hull-Based Uncertainty Analysis, Ferhat Ozgur Catak, Murat Kuzlu, Taylor Patrick, Michel Audette

Engineering Technology Faculty Publications

In recent years, vision-language models (VLMs) have been applied to various fields, including healthcare, education, finance, and manufacturing, with remarkable performance. However, concerns remain regarding VLMs’ consistency and uncertainty, particularly in critical applications such as healthcare, which demand a high level of trust and reliability. This paper proposes a novel approach to evaluate uncertainty in VLMs’ responses using a convex hull approach on a healthcare application for visual question answering (VQA). For any VLM, temperature refers to a sampling parameter used in probabilistic generation, which controls the randomness of the model’s output. The LLM-CXR model is selected as the medical …

Generative Ai-Driven Optimization In Flexible And Reconfigurable Manufacturing Systems, Salah Hammedi, Hicham Chaoui, Lotfi Nabli

Electrical & Computer Engineering Faculty Publications

Flexible and Reconfigurable Manufacturing Systems (FRMSs) are essential for coping with variability in modern production environments; however, efficient scheduling and rapid reconfiguration remain challenging. This paper presents a hybrid optimization framework that integrates Colored Petri Net (CPN) modeling with Generative Artificial Intelligence (GenAI) to enhance scheduling performance and system adaptability. The CPN formalism ensures verifiable modeling of system dynamics, while a transformer-based generative model produces candidate scheduling and reconfiguration strategies. Simulation experiments were conducted under static, dynamic, and adaptive scenarios, including machine breakdowns and dynamic job arrivals. Performance was evaluated using makespan, mean flow time, machine utilization, and reconfiguration latency. …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Securing The Energy Transition: Cyber-Physical Security And Resilience In Next-Generation Power Systems, Airin Rahman

Graduate Studies Theses and Dissertations 2026

Modern power systems are rapidly evolving into renewable-dominated and digitally interconnected cyber-physical infrastructures due to the increasing deployment of distributed energy resources (DERs), inverter-based technologies, and advanced control platforms. Maintaining reliability under high renewable penetration requires flexible resources capable of shifting energy across extended time horizons. Long-duration energy storage (LDES), particularly hydrogen-based energy systems, has therefore emerged as an important enabler of renewable integration, grid flexibility, and resilience. However, the growing dependence on communication, sensing, and distributed control also expands the cyber-physical attack surface of modern power systems, creating security and resilience challenges that conventional operational paradigms were not designed …

Advancing Cyber-Physical Security And Resilience Of Modern Power Systems: Intelligent Monitoring, Secure Operation, And Resilient Recovery, Md Moshiur Rahman

Graduate Studies Theses and Dissertations 2026

Modern power distribution systems are rapidly evolving into cyber-physical, DER-rich, and data-driven networks that rely on extensive sensing, communication, automation, grid-edge intelligence, and operator decision support. While this transformation improves flexibility, observability and controllability, it also expands the cyber-attack surface and increases the risk that cyber intrusions can propagate into physical disturbances, compromised DER operation, degraded situational awareness, and interrupted service continuity. This dissertation advances the cyber-physical security and resilience of modern distribution systems by developing a high-fidelity real-time cyber-physical hardware-in-the-loop testbed using OPAL-RT, EXata CPS, industrial relays, SCADA/RTAC, HMI, and grid-edge devices to emulate realistic DER-integrated distribution grid operation. …

Improvement Of Technology And Control And Management Systems Of The Plant Oil Refination Process, Elyor Samadov

Chemical Technology, Control and Management

The article examines modern approaches to modernizing vegetable oil refining processes from the perspective of increasing energy efficiency, environmental friendliness, and final product quality. Traditional and innovative technologies are analyzed, with a focus on the implementation of membrane filtration, automated control systems, heat exchange complexes, and renewable energy sources. It has been shown that the use of intelligent control systems, high-precision membrane filters, and heat regeneration allows for a 25% reduction in energy consumption, a 20% reduction in greenhouse gas emissions, and a significant improvement in acidity, color, and impurity content in the product. The obtained results show the effectiveness …

Analog Systems Of Physical Quantities And Their Graph Models In Determining The Parameters Of Mechatronic Modules, Temurbek Omonboevich Rakhimov, Elmira Eshmurod Qizi Raxmanova, Guzal Khujaniyazova

Chemical Technology, Control and Management

This article is dedicated to the analogy systems of physical quantities and their graph models in determining the parameters of mechatronic modules. It presents the general sets and fundamental laws of analogy systems of physical quantities and their elements for determining the parameters of mechatronic modules. Based on the general sets and fundamental laws of analogy systems of physical quantities and their elements, principles have been developed for mechatronic modules with a heterogeneous structure consisting of electrical, magnetic, and mechanical parts. In these modules, the field as a form of matter exists, forming the basis for developing mathematical models to …

Improving Self-Diagnostic Methods Of Flow Measurement Systems Based On Artificial Intelligence, Elbek Ortikov

Chemical Technology, Control and Management

The article examines methods for improving self-diagnostics of consumption measurement systems based on artificial intelligence in the context of industry digitalization and the development of cyber-physical systems. It has been shown that traditional flow meters used to measure the flow rate of liquids and gases are subject to mechanical, hydraulic, electronic, and hidden failures, which reduce the accuracy and reliability of measurements. A justification for the need to transition from classical maintenance methods to intelligent self-control methods that ensure the detection of anomalies and hidden malfunctions in real time is presented. A multi-level architecture of intelligent self-diagnosis is proposed, including …

Performance Assessment Of Operators Under Digital Simulator-Based Training In Automated Industrial Systems, Kamola Abdullaeva

Chemical Technology, Control and Management

This article proposes a comprehensive approach to training process operators, based on computer simulators integrated with digital twins, SCADA/DCS systems, real production data, and artificial intelligence algorithms. This approach is particularly relevant given the increased requirements for safety, productivity, and reliability of industrial facilities, as human factors are often the main cause of accidents (up to 60-80% of cases). The architecture of the simulator complex is designed to accurately emulate steady-state, transient, and pre-emergency operating modes of equipment, which are not achievable under actual production conditions. The experiment compared the training effectiveness of two groups of operators: one that used …

Expansion Of The Functionality Of Discrete Fiber-Optic Liquid Level Sensors, Azimjon Mamadaliyevich Khusanov, Yuriy Gennadyevich Shipulin

Chemical Technology, Control and Management

The article examines the problems and prospects of creating discrete fiber-optic liquid level gauges. Functional diagrams of single-channel and multi-channel discrete fiber-optic liquid level meters are presented. Examining the challenges of keeping this system running continuously reveals that sustaining its required reliability necessitates replacing malfunctioning measurement systems with operational ones. Investigations into differential equation models demonstrate that system recovery and failure events occur independently and follow a Poisson distribution pattern.

Investigation Of Nonlinear Magnetic Circuits Of Measuring Transducers With A Special Parameter Distribution Structure, Javhar Sulton O'G'Li Fayzullayev

Chemical Technology, Control and Management

The article proposes a new analytical method for investigating nonlinear magnetic circuits with a special structure of parameter distribution. The method is based on introducing into the system of nonlinear differential equations of such circuits the condition that the second derivative of the magnetic flux along the length of the circuit is equal to zero, as well as on the assumption that one of the geometric parameters of the studied magnetic circuit – the size of the air gap between the ferromagnetic rods, their thickness, width, or the linear value of the number of turns of the distributed excitation winding …

Design Of A Fuzzy Set-Point Tracking Controller Based On The State-Dependent Control Characteristics Of Fuzzy Logic And Pid For Temperature Control Systems In Electrical Equipment, Rahim Mammadzada

Chemical Technology, Control and Management

This paper presents a Fuzzy-SPT (Fuzzy Set-Point Tracking) controller designed to combine the strengths of FLC (Fuzzy Logic Control) and PID (Proportional-Integral-Derivative) control while mitigating their limitations across varying operating conditions. Inspired by state-dependent reasoning but implemented within a single controller, the method uses internal logic to adapt the control effort across different operating regions. FLC handles rapid changes and nonlinear transients, enabling fast system response without overshoot, while PID-like integral action is activated when the FLC reaches steady state or enters a threshold region near the set point, eliminating residual errors and maintaining stable performance. By applying each behavior …

Empirical Analysis Of Machine Learning Models For Predicting Equipment Failures Using Iot Sensor Data, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

This article examines the problem of detecting and predicting industrial equipment faults using IoT sensor data through machine learning techniques. Sensor readings such as temperature, vibration, pressure, voltage, and current, as well as FFT-based features, were statistically analyzed. Class imbalance and low signal informativeness were identified as key factors limiting model accuracy. Results obtained from Logistic Regression, Random Forest, and XGBoost models were comparatively evaluated, showing that when ROC-AUC values remain around 0.5, distinguishing fault and non-fault states becomes challenging. Correlation and feature-importance analyses confirmed the absence of strong dominant indicators. The findings highlight the need to improve sensor architecture …

Current Trends In Industrial Gas Furnace Control And Monitoring Systems, Utkir Uktam O'Gli Kholmanov

Chemical Technology, Control and Management

This paper presents a critical review of modern control methods applied to industrial gas-fired furnaces. Conventional PID controllers and their advanced modifications, including Advanced Process Control (APC) and cascade control schemes, are analyzed alongside Model Predictive Control (MPC) approaches. In addition, intelligent control algorithms—such as fuzzy logic and neuro-fuzzy systems (Fuzzy, ANFIS)—are examined. The study also considers advanced sensing technologies, including Tunable Diode Laser Absorption Spectroscopy (TDLAS), acoustic pyrometry, and infrared pyrometers, as well as digital twins and CFD-based modeling techniques. Particular attention is given to a comparative evaluation of control strategies based on key performance criteria, including energy efficiency, …

Skeleton-Based Human Action Recognition Using Spatio-Temporal Latent Features With A Gcn Model, Avazjon Marakhimov, Kabul Khudaybergenov, Mominov Zakhriddin

Chemical Technology, Control and Management

Owing to its resilience to visual noise and viewpoint variations, skeleton-based analysis has become a cornerstone of human action recognition research. Despite its practical significance, existing methodologies often suffer from a reliance on single-stream skeletal representations, which fail to encompass the full complexity of action features. This study introduces Latent Features for Human Action Recognition (LFHAR), a novel architecture designed to overcome these limitations by utilizing diverse spatio-temporal latent representations for improved feature extraction. The approach applies graph-based transformations to individual skeletal frames in temporal sequences, then arranges the derived graph features into spatio-temporal matrices. Evaluation of standard datasets demonstrates …

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …

Application Of Natural Language Processing And Machine Learning For Analyzing Mining Accident Reports And Automating The Process Of Root Cause Analysis, Siddhartha Agarwal, Y. P. Chugh, Atul Singh, Vikram Sakinala, Ayan Mukherjee, Balbir Prasad, Cihan Dagli, Yuhao Zou

Engineering Management and Systems Engineering Faculty Research & Creative Works

Coal mining accidents are a major concern worldwide, necessitating effective safety measures and comprehensive analysis to prevent future accidents. Our proposed solution is the first attempt for Indian mines, inspired by the potential of Natural Language Processing (NLP) that can read and analyze vast repositories of accident records in seconds. In combination with machine learning (ML), NLP algorithms can extract unstructured text by eliminating manual data entry errors, reading poorly scanned reports, and understanding multiple versions of the event and cluster documents based on types that would otherwise take months to collate. In the case of accident records, it can …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …

User Interface And Watchstation Improvements Required For Multi-Vehicle Usv Operations, Val Schmidt, Joshua Bergeron

Faculty Publications

In October 2024, the University of New Hampshire and NOAA’s Uncrewed Systems Office embarked on a mapping mission in the Gulf of Maine, simultaneously operating two DriX Un-crewed Surface Vehicles. Goals of the project were focused on testing hypotheses related to concepts of operation, including the safety of operations, cognitive loading of operators, management of vehicle endurance, vehicle logistics, maintenance and field support, refueling and a host of others.

Analysis Of A Cloud-Based Robot Motion Planning System, Yusif Mardanzade, Latafat Abbas Gardashova

Chemical Technology, Control and Management

As a result of the integration of cloud computing technologies into the field of robotics, the concept of "cloud robotics" has emerged. Unlike traditional robots, cloud-based robot systems remove computation, memory, and even some software from the local device and rely on remote resources obtained over the network. This approach ensures that robots are not limited only by their internal computing capabilities and allows them to take advantage of the wide range of opportunities offered by the cloud infrastructure. As a result, robots have access to large databases, highly parallel computing, and collective learning capabilities anytime and anywhere. In addition, …

Intelligent Decision-Making Systems In Smart Greenhouses, Muso Berdiyor Ugli Allanov

Chemical Technology, Control and Management

Smart greenhouses offer a solution to sustainable food production under climate uncertainty, yet their management often depends on fixed rules or human intuition. This study proposes an intelligent decision-making framework that integrates optimization, simulation, and a neural set into a self-learning system. By generating “conditionally real data” through simulation and evolutionary algorithms, the system can predict microclimatic changes and optimize control of water, energy, and nutrients. Continuous digital feedback enables adaptive, data-efficient operation even with limited real data. Experimental results demonstrate reduced resource use and improved yield stability, advancing the development of autonomous and resilient greenhouse ecosystems.

The Use Of Diagnostic And Restructuring Methods To Build Reliable Management Systems, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

This article is devoted to the applied analysis of diagnostic and restructuring methods aimed at ensuring the reliability of control systems in the event of failures. The paper considers practical implementations of diagnostic and control algorithms using a servo drive setup as an example. The results of experiments are presented, demonstrating the system's behavior under various fault conditions. A comparative analysis of the effectiveness of the proposed solutions is carried out in terms of stability and operational accuracy. The obtained data confirm the feasibility of using adaptive control structures to increase the fault tolerance of technical systems. The article concludes …

Modern Significance And Development Trends In The Production Of Vegetable Oils, Umidjon Ruziev, F.O. Qosimov, M.K. Shodiev

Chemical Technology, Control and Management

This article provides a comprehensive analytical review of the current state of the global vegetable oil production market. It describes the diversity of raw materials supplied, which includes both traditional and emerging fat sources. The paper also describes the technological stages of production, emphasizing modern innovations that contribute to more efficient, high-quality, and safe production. The article also covers global trends by comparing production dynamics between countries, highlighting regions with the highest rates of production growth and explaining the reasons for their competitive advantages. Particular attention is paid to environmental and socio-economic aspects, including sustainable land use, certification, carbon footprint, …

Investigation Of The Fuel Combustion Process In Gas-Fired Furnaces For Automation Systems, N.R. Yusupbekov, Sh.M. Gulyamov, A.T. Rajabov, U.U. Kholmanov

Chemical Technology, Control and Management

The regularities of the combustion process of gaseous fuel in chamber furnaces are described. This process represents a homogeneous reaction in which there is no distinct boundary surface between the fuel and the oxidizer. It is shown that the latter either mix and then burn subsequently, or both processes occur simultaneously, corresponding respectively to kinetic and diffusion combustion. The structure of a turbulent-diffusion flame of gaseous fuel combustion is presented.