Electrical and Computer Engineering Commons^™

Heart-Rate Monitoring Control System Using Photoplethysmography (Ppg), Wesley Nguyen, Ryan Horjus

Electrical Engineering

No abstract provided.

Design And Implementation Of A Byzantine Fault Tolerance Framework For Non-Deterministic Applications, H. Zhang, Wenbing Zhao, Louise E. Moser, P. Michael Melliar-Smith

Electrical and Computer Engineering Faculty Publications

State-machine-based replication is an effective way to increase the availability and dependability of mission-critical applications. However, all practical applications contain some degree of non-determinism. Consequently, ensuring strong replica consistency in the presence of application non-determinism has been one of the biggest challenges in building dependable distributed systems. In this Study, the authors propose a classification of common types of application non-determinism with respect to the requirement of achieving Byzantine fault tolerance (BFT), and present the design and implementation of a BFT framework that controls these types of non-determinism in a systematic manner.

Modeling And Analysis Of The Effects Of Pcb Parasitics On Integrated Dc-Dc Converters, Darwin Domingo Fernandez

Master's Theses

Load transients are prevalent in every electronic device including semiconductor memory, card readers, microprocessors, disc drives, piezoelectric devices, and digitally based systems. They are capable of producing voltage stress, introducing noise, and degrading device functionality. In order to avoid damage to the device, a feedback control loop is implemented with system compensation to regulate the output voltage deviations by the converter. Because designing compensation networks can be rather complicated, DC-DC converters with integrated feedback control topologies help minimize design time and complexity of converter compensation at the expense of design flexibility. This thesis widens the limitations of an integrated DC-DC …

Reducing Energy Usage Of Null Convention Logic Circuits Using Null Cycle Reduction Combined With Supply Voltage Scaling, Brett Sparkman

Electrical Engineering Undergraduate Honors Theses

The NULL Cycle Reduction (NCR) technique can be used to improve the performance of the NULL Convention Logic (NCL) circuit at the expense of power and area. However, by decreasing the supply voltage of certain components, the power of the NCR circuit can be reduced. Since NCR has increased performance, it could be possible to decrease the power while maintaining the original performance of the circuit. To verify this, the NCR circuit will be implemented using a 4-bit by 4-bit dual-rail multiplier as the test circuit. This circuit will be simulated in ModelSim to ensure functionality, synthesized into a Verilog …

Mechatronics Application To Solar Tracking, Danny L. Rodriguez Jr

Purdue Polytechnic Directed Projects

The purpose of this was to design and implement a two-axis solar tracking system utilizing the National Instruments C-Rio real time controller. In order to accomplish this a prototype was modeled in CAD. This prototype used two 12 V DC motors to change a solar panel's rotation and tilt based on feedback data from three cadmium sulfide photoresistors. This configuration was chosen for its ability to create both a left-right rotational and an up/down tilt differential. In Addition this approach uses National Instruments Labview to control a solar tracking system. Using Labview add uniqueness to this project by adding a …

Increasing Efficiency In Boundary Security With Wireless Sensor Networks And Geospatial Information Systems Using Homology Theory, Luis Berumen^, Eric Chaidez^, Hamide Dogan*, Jose Gerardo Rosiles**

COURI Symposium Abstracts, Spring 2011

As part of an institutional investigation, we attempt to address the challenges the US customs and Border protection agency faces in the El Paso region. Our research focuses on defining a system for the surveillance application, and the use of mathematical models employed to achieve a greater efficiency of such architecture. With the use of the defined system, we apply homology theory through the algebraic process of topology, to accomplish an independent coordinate-free based system, which covers the surveillance area, with lesser quantity of sensor nodes. Our architecture makes the use of an operating system for wireless sensor networks; TinyOS, …

Creating A Network Model For The Integration Of Dynamic And Static Supervisory Control And Data Acquisition (Scada) Test Environment, Marlon Coerbell

Theses and Dissertations

Since 9/11 protecting our critical infrastructure has become a national priority. Presidential Decision Directive 63 mandates and lays a foundation for ensuring all aspects of our nation's critical infrastructure remain secure. Key in this debate is the fact that much of our electrical power grid fails to meet the spirit of this requirement. My research leverages the power afforded by Electric Power and Communication Synchronizing Simulator (EPOCHS) developed with the assistance of Dr. Hopkinson, et al. The power environment is modeled in an electrical simulation environment called PowerWorld©. The network is modeled in OPNET® and populated with self-similar network and …

Off-Grid Photovoltaic System Design Project, Brian Duffy

Electrical Engineering

This project uses the BP SX 150S solar panel to charge a 12 V battery. This battery powers an AIMS 400 W Modified Sine Wave Inverter to provide 120 V RMS AC power to a load of up to 40 W. Inverter efficiency was measured at different load conditions. A control circuit was implemented to prevent overcharging or over-discharging of the battery, by disconnecting it from the panel or the load, respectively. The control circuit turn-on and cutoff voltages were measured versus battery voltage, and the on-resistance of the MOSFET switches was measured for various load currents. A table of …

Intelligibility Of Electrolarynx Speech Using A Novel Hands-Free Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal or plastic plate at a frequency within the range of glottal excitation. In this paper, the intelligibility of speech produced using a novel hands-free actuator is compared to speech produced using a conventional electrolarynx. Two able-bodied speakers (one male, one female) performed a closed response test containing 28 monosyllabic words, once using a conventional electrolarynx and a second time using the novel design. The resulting audio recordings …

Augmented Control Of A Hands-Free Electrolarynx, Brian Madden, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx acts as the sound source, providing a quasi-periodic excitation of the vocal tract. Following a total laryngectomy, some people speak using an electrolarynx which employs an electromechanical actuator to perform the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the monotonic sound emitted, the need for a free-hand to operate the device, and the difficulty experienced by many laryngectomees in adapting to its use. One improvement to the electrolarynx, which clinicians and users frequently suggest, is the provision of a convenient hands-free control facility. This would allow more natural use of …

Robust Region Tracking In Multi-Agent Systems Utilizing Sliding Mode Control: Theory And Applications, Mark Bacon

Master's Theses

This thesis presents a methodology to bring controlled agents within a moving region despite agent interaction dynamics, uncertain forces and parameter variation. The logic is derived from traditional Sliding Mode Control theory with an expanded boundary layer which allows position deviation from the region center to specified bounds. As an example of the utility of this control, multiple methods of herding (controlling passive agents by appropriate positioning of controlled agents) are presented.

Parallel Operation Of Inverters And Active Power Filters In Distributed Generation System: A Review, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Articles

In this paper a technical review of parallel operation of power electronics inverters for load sharing conditions in distributed generation (DG) network is presented. Emphasis is given to parallel operation of Active Power Filters (APFs) as they are widely used to mitigate load current disturbances into DG networks. Discussions on recent advances in control strategies as applied to APFs are presented.

Aether, Thomas Cameron, Kristine Colton, Daren Childers

Electrical Engineering

Aether is a RC-style autonomous air vehicle that utilizes GPS positioning along with a wireless communication system to achieve a computer-controlled flight.

This report will incorporate the acquisition, design, integration, implementation and testing phases of the UAV development. Furthermore a discussion of troubleshooting as well as improvements for future projects will be included.

Special Issue On Wireless Sensor And Actuator Networks, Jiming Chen, Karl H. Johanson, Stephan Olariu, Ioannis Ch. Paschalidis, Ivan Stojmenovic

Computer Science Faculty Publications

( First paragraph) WIRELESS Sensor Networks (WSNs), in their various shapes and forms, have greatly facilitated and enhanced the automated, remote, and intelligent monitoring of a large variety of physical systems. These networks consist of a large number of typically small devices, each incorporating sensing, processing, and wireless communications capabilities. Their use has penetrated a plethora of application domains from industrial and building automation, to environmental, wildlife, and health monitoring.

Subwoofer Frequency Response Optimization By Means Of Active Control, Luis Dominguez

Aerospace Engineering

Most subwoofer systems have difficulties producing frequencies in the low end of the hearing spectrum due to the added power requirements and instabilities. Active controls can transform the audio signal without changing physical characteristics and ultimately generating a more impressive audio system. A Linkwitz transform crossover was implemented to extend the low end frequency response of a sealed enclosure. A graphical user interface in MATLAB was written to aid in selection of components, driver and enclosure volume. The circuit board was built and integrated with a home theater system inside of a couch and tested with a Real Time Analyzer. …

Modeling Of A Gyro-Stabilized Helicopter Camera System Using Neural Networks, Nicholas Joseph Layshot

Master's Theses

On-board gimbal systems for camera stabilization in helicopters are typically based on linear models. Such models, however, are inaccurate due to system nonlinearities and complexities. As an alternative approach, artificial neural networks can provide a more accurate model of the gimbal system based on their non-linear mapping and generalization capabilities.

This thesis investigates the applications of artificial neural networks to model the inertial characteristics (on the azimuth axis) of the inner gimbal in a gyro-stabilized multi-gimbal system. The neural network is trained with time-domain data obtained from gyro rate sensors of an actual camera system. The network performance is evaluated …

Control Of Longitudinal Pitch Rate As Aircraft Center Of Gravity Changes, John Andres Cadwell Jr.

Master's Theses

In order for an aircraft to remain in stable flight, the center of gravity (CG) of an aircraft must be located in front of the center of lift (CL). As the center of gravity moves rearward, pitch stability decreases and the sensitivity to control input increases. This increase in sensitivity is known as pitch gain variance. Minimizing the pitch gain variance results in an aircraft with consistent handling characteristics across a broad range of center of gravity locations.

This thesis focuses on the development and testing of an open loop computer simulation model and a closed loop control system to …

Fuzzy Logic Control Of An Inverted Pendulum Robot, Kyle Reid

Electrical Engineering

The inverted pendulum is a classical problem in controls.  The inherit instabilities in the setup make it a natural target for a control system.  Over the years it has been the benchmark for testing new and innovative control theories such as Fuzzy Logic.  During the course of this project a software fuzzy logic controller was implemented using a PIC microcontroller.  At the conclusion of the experiment an interesting realization was made about the nature of Fuzzy Logic and its applicability in the world of controls.

Fault-Injection Experiment For The Statistical Characterization Of Faults In Avionics Communication System, Amy M. Yates

Electrical & Computer Engineering Theses & Dissertations

Since flight control systems perform safety-critical functions, it is important to understand the possible effects on the closed-loop dynamical system's performance caused by these faults. The purpose of this project is to design the software and hardware needed to add fault-injection and monitoring capabilities to ROBUS-2, a flight communication system. ROBUS-2 is the current version of the fault-tolerant computer communication system used by the Scalable Processor-Independent Design for Enhanced Reliability (SPIDER), a general-purpose fault-tolerant integrated modular architecture (IMA) developed at the NASA Langley Research Center. The major components of SPIDER include processing elements (PEs) to perform calculations, bus interface units …

Compensation Of Torque Ripple In High Performance Bldc Motor Drives, Ilhwan Kim, Nobuaki Nakazawa, Sungsoo Kim, Chanwon Park, Chansu Yu

Electrical and Computer Engineering Faculty Publications

Brushless DC motor drives (BLDC) are finding expanded use in high performance applications where torque smoothness is essential. The nature of the square-wave current excitation waveforms in BLDC motor drives permits some important system simplifications compared to sinusoidal permanent magnet AC (PMAC) machines. However, it is the simplicity of the BLDC motor drive that is responsible for causing an additional source of ripple torque commonly known as commutation torque to develop. In this paper, a compensation technique for reducing the commutation torque ripple is proposed. With the experimental results, the proposed method demonstrates the effectiveness for a control …

Stochastic Optimal Control In Nonlinear Systems, Celestin Nkundineza

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Stochastic control is an important area of research in engineering systems that undergo disturbances. Controlling individual states in such systems is critical. The present investigation is concerned with the application of the stochastic optimal control strategy developed by To (2010) and its implementation as well as providing computed results of linear and nonlinear systems under stationary and nonstationary random excitations. In the strategy the feedback matrix is designed based on the achievement of the objectives for individual states in the system through the application of the Lyapunov equation for the system. Each diagonal element in the gain or associated gain …

Wavelet Based Islanding Detection Of Dc-Ac Inverter Interfaced Dg Systems, Mohamed Moin Hanif, Malabika Basu, Kevin Gaughan

Conference papers

The increased penetration of distributed generation (DG) often connected to grid through dc-ac interface has made islanding detection an important and challenging issue to power engineers. Several methods based on passive and active detection scheme have been proposed in the literature. While passive schemes have a large non detection zone (NDZ), concern has been raised on active method due to its degrading power quality effect. This paper proposes a wavelet based passive islanding detection scheme with almost zero NDZ for dc-ac inverter interfaced grid connected DGs. The key idea is to utilize the spectral changes in the higher frequency components …

Enhanced Cal Poly Super System Simulink Model, Matthew Ogden Mcfarland

Master's Theses

The Cal Poly Sustainable Power for Electrical Resources (SuPER) project is a solar power DC distribution system designed to autonomously manage and supply the energy needs of a single family off-the-grid home. The following thesis describes the improvement and re-design of a MATLAB Simulink model for the Cal Poly SuPER system. This model includes a photovoltaic (PV) array, a lead-acid gel battery with temperature effects, a wind turbine model, a re-designed DC-DC converter, a DC microgrid, and multiple loads. This thesis will also include several control algorithms such as a temperature controlled thermoelectric (T.E.) cooler, intelligent load switching, and an …

Conservation Based Uncertainty Propagation In Dynamic Systems, Lillian J. Ratliff

UNLV Theses, Dissertations, Professional Papers, and Capstones

Uncertainty is present in our everyday decision making process as well as our understanding of the structure of the universe. As a result an intense and mathematically rigorous study of how uncertainty propagates in the dynamic systems present in our lives is warranted and arguably necessary. In this thesis we examine existing methods for uncertainty propagation in dynamic systems and present the results of a literature survey that justifies the development of a conservation based method of uncertainty propagation. Conservation methods are physics based and physics drives our understanding of the physical world. Thus, it makes perfect sense to formulate …

A Comparison Of Induction Motor Starting Methods Being Powered By A Diesel-Generator Set, Adam John Wigington

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Starting induction motors on isolated or weak systems is a highly dynamic process that can cause motor and load damage as well as electrical network fluctuations. Mechanical damage is associated with the high starting current drawn by a ramping induction motor. In order to compensate the load increase, the voltage of the electrical system decreases. Different starting methods can be applied to the electrical system to reduce these and other starting method issues. The purpose of this thesis is to build accurate and usable simulation models that can aid the designer in making the choice of an appropriate motor starting …

Architectural Considerations For Single Operator Management Of Multiple Unmanned Aerial Vehicles, Gabriel T. Bugajski

Theses and Dissertations

Recently, small Unmanned Aircraft Systems (UAS) have become ubiquitous in military battlefield operations due to their intelligence collection capabilities. However, these unmanned systems consistently demonstrate limitations and shortfalls with respect to size, weight, range, line of sight and information management. The United States Air Force Unmanned Aircraft Systems Flight Plan 2009-2047 describes an action plan for improved UAS employment which calls out single operator, multi-vehicle mission configurations. This thesis analyzes the information architecture using future concepts of operations, such as biologically-inspired flocking mechanisms. The analysis and empirical results present insight into the engineering of single-operator multiple-vehicle architectures.

Solar Panel Tracker, Andrew Hsing

Electrical Engineering

This project will be a design and implementation of a polar single axis solar panel tracker. It will have a fixed vertical axis and an adjustable horizontal motor controlled axis. This setup is similar to an office swivel chair. The tracker will actively track the sun and change its position accordingly to maximize the energy output. To prevent wasting power by running the motor continuously, the tracker will correct it's position after 2 to 3 degrees of misalignment. The sensors will compare the light intensities of each side and move the panels until the tracker detects equal light on both …

Multiple Robot Boundary Tracking With Phase And Workload Balancing, Michael Jay Boardman

Master's Theses

This thesis discusses the use of a cooperative multiple robot system as applied to distributed tracking and sampling of a boundary edge. Within this system the boundary edge is partitioned into subsegments, each allocated to a particular robot such that workload is balanced across the robots. Also, to minimize the time between sampling local areas of the boundary edge, it is desirable to minimize the difference between each robot’s progression (i.e. phase) along its allocated sub segment of the edge. The paper introduces a new distributed controller that handles both workload and phase balancing. Simulation results are used to illustrate …

Pulse Density Modulated Soft Switching Cycloconverter, Jesse Timothy Adamson

Master's Theses

Single stage cycloconverters generally incorporate hard switching at turn on and soft switching at turn off. This hard switching at turn on combined with the slow switching speeds of thyristors (the switch of choice for standard cycloconverters) limits their use to lower frequency applications.

This thesis explores the analysis and design of a pulse density modulated (PDM), soft switching cycloconverter. Unlike standard cycloconverters, the controller in this converter does not adjust thyristor firing angles. It lets only complete half cycles of the input waveform through to the output. This allows and requires a much greater frequency step down from the …

Adverse Elevator Effect In Landing Flare, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.