Electrical and Computer Engineering Commons^™

Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article investigates methods for assessing soil salinity levels based on satellite (remote sensing) imagery and their calculation algorithms. Determining the degree of salinity plays a crucial role in the rational use of land resources and increasing agricultural efficiency. The study analyzes indices for determining soil salt content using remote sensing technologies, particularly multispectral images obtained from satellite systems such as Landsat and Sentinel (for example, SI - Salinity Index, NDVI - Normalized Difference Vegetation Index, and others). Furthermore, algorithms are developed based on these indices that enable automatic determination of salinity assessments. Artificial intelligence, machine learning, and geographic information …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.

Synthesis Of A Control System For Thermal Energy Facilities Using The Quantum Photon Spin Method, Isomiddin Siddikov, N.S Yakubova

Chemical Technology, Control and Management

Increasing energy efficiency and reducing fuel consumption in the process of generating electricity and heat at thermal power plants is one of the urgent tasks. Such systems operate under conditions of random changes in external and internal influences, as well as measurement uncertainties, which reduce the quality of control. In order to overcome this problem, it was proposed to develop an intelligent control system using the quantum photon-spin method to control technological units of thermal power plants. In the proposed approach, a multi-dimensional heating boiler device was taken as a control object, and the simulation modeling of the control system …

Superhydrophilic Porous Coooh Nano-Architecture With Abundant Oxygen Vacancies For Enhanced Urea Electrooxidation At Ampere-Level Current Densities, Wen-Jing Lv, Xiao-Man Tang, Xue-Tong Wang, Wen-Cai Liu, Jian-Wen Zhu, Guo-Jing Wang, Yuan-Zhi Zhu

Journal of Electrochemistry

The conversion of urea-containing wastewater into clean hydrogen energy has gained increasing attention. However, challenges remain, particularly with sluggish catalytic kinetics and limited long-term stability of urea oxidation reaction (UOR). Herein, we report the loosely porous CoOOH nano-architecture (CoOOH LPNAs) with hydrophilic surface and abundant oxygen vacancies (O_v) on carbon fiber paper (CFP) by electrochemical reconstruction of the CoP nanoneedles precursor. The resulting three-dimensional electrode exhibited an impressively low potential of 1.38 V at 1000 mA·cm⁻² and excellent durability for UOR. Furthermore, when tested in an anion exchange membrane (AEM) electrolyzer, it required only 1.53 V at …

Design And Optimization Of Anode Catalysts For Direct Ethanol Fuel Cells: Advances And Challenges In C-C Bond Activation And Selective Modulation Of The C1 Pathway, Kai-Chi Qin, Meng-Tian Huo, Yu Liang, Si-Yuan Zhu, Zi-Hao Xing, Jin-Fa Chang

Journal of Electrochemistry

Direct ethanol fuel cells (DEFCs) are a promising alternative to conventional energy sources, offering high energy density, environmental sustainability, and operational safety. Compared to methanol fuel cells, DEFCs exhibit lower toxicity and a more mature preparation process. Unlike hydrogen fuel cells, DEFCs provide superior storage and transport feasibility, as well as cost-effectiveness, significantly enhancing their commercial viability. However, the stable C–C bond in ethanol creates a high activation energy barrier, often resulting in incomplete electrooxidation. Current commercial platinum (Pt)- and palladium (Pd)-based catalysts demonstrate low C–C bond cleavage efficiency (

Investigating Resilience Of Cyberattack Detection Using Lyapunov-Based Economic Model Predictive Control To Data Poisoning, Helen Durand, Akkarakaran Francis Leonard

Chemical Engineering and Materials Science Faculty Research Publications

Cyberattacks may be performed on process control systems due to their integration of networking and computing with physical systems. Prior work in our group has developed detection strategies for nonlinear systems under sensor, actuator, and combined sensor and actuator attacks which can ensure, under characterizable conditions, that attacks can be detected before they cause safety issues. However, this work did not take into account the potential that an attacker could attempt to provide data to a process that causes an attack to remain undetected but that also is consistent with different process dynamics than those which the process has. This …

Response Of Dynamic Processes With Control Implemented On A Noisy Quantum Computer, Shilpa Narashimhan, Dominic Messina, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

A major challenge to determining the applicability (and potential outperformance over classical computers) of a quantum computer (QC) within chemical manufacturing processes is quantum noise. Computations by a QC are error-prone due to the influence of quantum noise inherent to the hardware. Errors in control inputs may destabilize a chemical process and lead to unsafe conditions for manufacturing personnel and the environment. The response of a process with control implemented on a QC to errors due to noise must be investigated thoroughly. In this work, the impacts of control input errors due to quantum noise on a process are modeled …

Heuristic Strategies For Process Stabilization Using Proportional Control Implemented By A Noisy Quantum Simulator, Keshav Kasturi Rangan, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Processing and storage demands of industrial processes are causing fields such as optimization, scheduling, and control to assess the effectiveness of quantum devices in their applications. A key objective of control systems is to ensure process safety. This paper focuses on the potential of quantum devices to compute control inputs that maintain system safety despite sources of nondeterminism inherent to currently available quantum devices (quantum noise). In our previous work, we employed a quantum simulator to assess whether a quantum implementation of a proportional (P) control law could stabilize a single-input/single-output system under quantum noise approximated from a real quantum …

Tools To Design Algorithms For Implementing Control Over Quantum Computers, Shilpa Narashimhan, Jihan Abou Halloun, Kip Nieman, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computers (QCs) may find future applications within control systems that operate manufacturing processes. For application within control engineering, quantum algorithm development must be led by control engineers. However, control engineers may face challenges in designing quantum algorithms for control engineering problems. In this work, we provide several path-finding studies that leverage engineering tools such as optimization, encryption, and computational "short-cuts" toward making algorithm design for QC easier for control engineers.

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Design Of Automation For The Absorption Process In Hydrogen Purification From Carbon Dioxide, Azizbek Nodirbekovich Yusupbekov, Saidamirkhon Oripov, Diyoraxon Zokirxon Qizi Oripova

Chemical Technology, Control and Management

This article discusses the automation of the methanol-acetone mixture absorption process to improve control efficiency. The existing local automatic control system (ACS) was upgraded to a cascade system, reducing component concentration deviations by 12% and decreasing the transition process time from 1606 to 1592 seconds. A mathematical model of the gas absorption process was developed, incorporating material balance equations, mass transfer equations, and transfer functions. The parameters of the PI controller were calculated to ensure system stability under ±10% coefficient variations. A comparative analysis of system characteristics before and after modernization confirmed a reduction in overshoot to 0% and an …

Optimisation Of Astatic Controllers In Automatic Control Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

This article examines the influence of various factors on the efficiency of optimizing station controllers in automatic control systems. The main focus is on minimizing static errors and improving the reliability of controllers. Optimization methods for PID and PI²D controllers are discussed, including the use of modern approaches such as genetic algorithms. The necessity of compromise solutions to achieve high-quality system responses to various impacts is investigated. It was also suggested that there is a need for an integrated approach to setting up controllers in order to increase their reliability and flexibility in conditions of dynamically changing processes. …

Energy Conversion In Nuclear Batteries, Suhrob Vahob O'G'Li Ibrohimov

Chemical Technology, Control and Management

The transformation of energy in nuclear reactors or processes involves converting mass into energy as a result of nuclear reactions. This can include nuclear fission (splitting heavy atomic nuclei) or nuclear fusion (combining light nuclei). In these processes, energy is released in the form of heat, which can be used for electricity generation or other purposes.

Modeling Of Carbonization And Absorption Processes In Soda Ash Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fatima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The article considers the problem of modeling the ammonia-soda process of soda ash production and presents the chemistry of sodium bicarbonate (NaHCO₃) formation. The equation of the kinetics of the reaction, used as a model of the carbonation process, is derived from a system of equations and its computer model is compiled. The system of differential equations reflecting the kinetics of the process was solved in the Mathcad package. The result of the modeling is presented. Based on the experimental data, the dependence of the absorption column performance on temperature and the dependence reflecting the optimal value of the absorption …

A Smart System For Detecting Anatomic And Histological Symptoms Of Diseased Agricultural Plants, Rustam Baratov, Himola Sunnatillayeva, Alimardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This study describes a novel agricultural plant disease detecting smart system, capable of handling measured plant body parameters and images received by high resolution camera at the same time. The proposed plant disease detection method is based on evaluation of the signals received by measured and controlled plant body physical parameters like resistance, temperature and capacitance of the plant stem and image processing. An analogue plant model based on an electrical circuit with distributed parameters was developed. In addition, in the article the block diagram of the smart system for the early detection of plant diseases, the circuit diagram, its …

The Importance Of The Analog-To-Digital Converter In The Measurement System, Aliev Ravshan, Anvar Djalilov

Chemical Technology, Control and Management

At the moment, many scientific researches are being conducted all over the world on the economical use of water and energy resources. Most of the scientific research works are aimed at improving measurement techniques and technologies, that is, increasing their accuracy. With this in mind, a high-precision analog-to-digital converter due to its unique metrological and technical characteristics was studied in this research paper. As a result of the study, it became clear that the use of a small-sized, high-precision sigma-delta analog-to-digital converter in modern measuring technology has a positive effect on its accurate and efficient operation.

Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat

Chemical Technology, Control and Management

This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.

Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater, Alisher Khudoyberdi Ugli Rakhimov, Hasan Siddiq Ugli Murodov, Farrukh Bakhtiyorovich Igitov, Shuhrat Ahmadjonovich Mutalov, Jaloliddin Abdurazzakovich Eshbobaev

Chemical Technology, Control and Management

The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated …

Development And Experimental Validation Of A Non-Invasive Blood Group Detection System, Nurath K. Nurudini

Tanzania Journal of Engineering and Technology (TJET)

An individual's blood group consists of red blood cell antigens whose composition is determined by protein presence, antigen structure, and gene series. Persons aged above six months have significant anti-A and/or anti-B in their serum. During transplantation and transfusion, ABO blood group identification is the most essential factor. The conventional method involves drawing blood samples from patients, and the blood group is determined based on the antigen-antibody reaction. This method consists of adding chemical reagents. However, this requires time of operation, and throughput analysis is high, and the process is also challenging to interpret. Accurate and rapid identification of blood …

Energy Optimal Coverage Motion Trajectory Generation Using A Fourth-Order Motion Profile, Mathias Halinga

Tanzania Journal of Engineering and Technology (TJET)

Industrial machines are widely used in manufacturing sector to manufacture several products to meet customer demands. Most of these industries runs all the time throughout a day leading to high operating cost. To cut costs and satisfy customer demand for precise products, industrial machines’ motion generation is important in improving machine motion precision while using less energy. This study presents a coverage motion energy optimization which is generated by linear interpolation of each segment described by the fourth-order motion profile. The phase changes in the profile are attained with continuity of machine kinematic limits jerk, acceleration, and velocity, which are …

Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani

Tanzania Journal of Engineering and Technology (TJET)

The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO₂ capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Adaptive Noise Estimation And Denoising With Deep Learning For Nmr Spectroscopy, Naveen Asokan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful analytical technique widely used for molecular structure elucidation in chemistry, biology, and medicine. However, spectral accuracy is often degraded by noise—particularly in low acquisition time settings—resulting in reduced resolution and obscured chemical features. While traditional noise reduction techniques such as signal averaging can improve spectral quality, they require longer acquisition times, limiting their utility in real-time and high-throughput applications.

This thesis presents a deep learning-based denoising framework designed to enhance the quality of complex-valued NMR spectra. The proposed model, built upon a U-Net architecture, incorporates both real and imaginary components of the …

Algorithms For Feature Extraction And Optimisation Of Object Recognition Operator, Hudayberdiev Xakkulmirzayevich Mirzaakbar, Bobomurod Mamitjonovich Tojiboev, Feruza Komiljonovna Samadova

Chemical Technology, Control and Management

This paper deals with the development and analysis of feature extraction and optimisation algorithms for object recognition operators. Different algorithms are used to improve the efficiency of recognition operators in the automatic analysis of remote sensing images. The information model of objects and methods for selecting, extracting and optimising their features have been studied. The issue of extracting important features of objects using spectral, textural and statistical features and constructing optimal operators based on them has also been studied. Effective approaches based on the theory of convex hulls and multidimensional analysis methods have been proposed, taking into account the mutual …

Determination Of Optimal Parameters For Quality Drying Of Garlic Using The Vibro-Convective Method, Jasur Safarov, Shakhnoza Sultanova, Abdurakhmon Mirkomilov

Chemical Technology, Control and Management

This article examines the process of drying garlic using a low-temperature vibratory-convective drying system. At the "Service Technology" department of Tashkent State Technical University, a vibratory dryer was developed to ensure high-quality drying of garlic while maximizing the preservation of its biologically active compounds. Through experimental studies, optimal drying parameters were determined, including the degree of moisture removal, process duration, airflow velocity, and vibration acceleration. The results obtained contribute to enhancing the efficiency and quality of garlic drying, which holds practical significance for agricultural producers and consumers interested in healthy nutrition.