Robotics Commons^™

Roborodentia Robot (Amazon Prime), Alec Cheung

Computer Science and Software Engineering

Roborodentia is an annual autonomous robotics competition sponsored and hosted by Cal Poly. In the 2016 competition, participants are to design a robot that scores the most points by gathering rings from marked supply pegs and placing them onto marked scoring pegs. For Roborodentia I designed, constructed, and programmed a robot, named Amazon Prime, to compete.

Roborodentia Robot: Tektronix, Sean Yap

Computer Engineering

Tektronix is a robot created to compete in the 2016 Roborodentia Competition. This report details the full function and implementation of the robot.

Roborodentia 2016: Scorpion, Tyler Whalen

Computer Engineering

This report showcases my entry into the Roborodentia 2016 competition, and my senior project. I chose this project because robotics has always interested me, and this was a great opportunity to jump in headfirst.

I will step through my design decisions and detail all information necessary for replicating this build.

“My Logic Is Undeniable”: Replicating The Brain For Ideal Artificial Intelligence, Samuel C. Adams

Senior Honors Theses

Alan Turing asked if machines can think, but intelligence is more than logic and reason. I ask if a machine can feel pain or joy, have visions and dreams, or paint a masterpiece. The human brain sets the bar high, and despite our progress, artificial intelligence has a long way to go. Studying neurology from a software engineer’s perspective reveals numerous uncanny similarities between the functionality of the brain and that of a computer. If the brain is a biological computer, then it is the embodiment of artificial intelligence beyond anything we have yet achieved, and its architecture is advanced …

Localization And Mapping Of Unknown Locations And Tunnels With Unmanned Ground Vehicles, Doris Turnage

Electronic Theses and Dissertations

The main goals of this research were to enhance a commercial off the shelf (COTS) software platform to support unmanned ground vehicles (UGVs) exploring the complex environment of tunnels, to test the platform within a simulation environment, and to validate the architecture through field testing. Developing this platform will enhance the U. S. Army Engineering Research and Development Center’s (ERDC’s) current capabilities and create a safe and efficient autonomous vehicle to perform the following functions within tunnels: (1) localization (e.g., position tracking) and mapping of its environment, (2) traversing varied terrains, (3) sensing the environment for objects of interest, and …

Dual 7-Degree-Of-Freedom Robotic Arm Remote Teleoperation Using Haptic Devices, Yu-Cheng Wang

USF Tampa Graduate Theses and Dissertations

A teleoperated system of dual redundant manipulator will be controlled in this thesis. The robot used with the dual redundant manipulator in this thesis is Baxter. Baxter’s redundant robot arms are 7-degree-of-freedom arms. The problem that will be solved in this thesis is optimization of the 7-degree-of-freedom robot arms. The control algorithm of the 7-degree-of-freedom robot arms will be discussed and built. A simulation program will be built to test the control algorithm. Based on the control algorithm, a teleoperation system will be created for Baxter. The controller used is Omni, which is a six-joint haptic device. Omni will also …

Roborodentia Robot 2015, Travis Stuever

Computer Engineering

The Roborodentia 2015 competition was a ring based challenge that had participants move PVC rings from one side of a course to another all within 3 minutes. In order to succeed in this competition there needs to be a good robotic design, thought out use cases, and good solid software.

Robotic Book Scanner, Tobias Samuel Elder, Cynthia Marie Wong

Computer Engineering

Digitizing books has been an issue tackled by companies to allow people to read off Kindles and iPads rather than the traditional paperback. Companies like Google have spent more than $1000 on machines to convert books into electronic copies readable on devices. Yet, not much effort has been made into the invention of an automatic book scanner for consumers. This project seeks to determine a cost-effective approach to robotic book scanning to create PDFs from physical books. This project serves as a proof of concept for a reasonably priced automatic book scanner accessible to consumers. Potentially, the device may be …

Automated Foosball Table, Jim R. Stefani, Alex J. Herpy, Brett Gordon Jaeger, Kevin S. Haydon, Derek Alan Hamel

Mechanical Engineering

This project is the second iteration of an automated foosball table for Yaskawa America as a trade show display. The table is meant to provide an interactive experience which highlights the speed and precision of the Yaskawa hardware. The first iteration of the project was mainly focused on creating the physical hardware for the system and to begin the basic programming for the system. This phase of the project was focused on finalizing the physical hardware of the system, implementing the vision system and to continue the basic programing of the system AI. A third team will be assigned to …

Flarebot - Analysis Of An Autonomous Robot, Sanat S. Sahasrabudhe

Computer Engineering

Autonomous robots are increasing in popularity for educational, research, and household purposes. This report analyzes the design and functionality of one such example, called FlareBot, which is designed to self-navigate and stack cans. Specifically, the robot is designed to follow a fixed path for navigation, and stack any cans it comes across. Once a maximum number of cans is stacked, the robot releases them and restarts the process. The design is achieved using three DC motors, two servo motors, one line sensor, and one infrared sensor. Designing autonomous robots is a strong test of the engineering design process, which includes …

Design Of A Running Robot And The Effects Of Foot Placement In The Transverse Plane, Timothy James Sullivan

Open Access Theses

The purpose of this thesis is to make advances in the design of humanoid bipedal running robots. We focus on achieving dynamic running locomotion because it is one metric by which we can measure how far robotic technologies have advanced, in relation to existing benchmarks set by humans and other animals. Designing a running human-inspired robot is challenging because human bodies are exceptionally complex mechanisms to mimic. There are only a few humanoid robots designed specifically for running and the existing robots are either constrained to a plane, do not yet exhibit human-like motion, or are unstable.

One aspect of …

Cpe Senior Project Final Report: Roborodentia 2012 - Team Street Sweeper, Jason Miller, David Pascale

Computer Engineering

The Street Sweeper was a multi-disciplinary, autonomous robotics project constructed to compete in Cal Poly's Roborodentia XVII in 2012. The goal of the competition was to collect painted cat food cans in the team's goal area, with bonus points for stacking the cans. Street Sweeper was very much a budget robot, but due to good planning and strategy, managed to place 2nd in the competition.

Woody: Roborodentia 2011 Robot, Felix Chung, Canh Sy, Hanson Yu

Computer Engineering

Woody is a fully autonomous robot built and designed for the 2011 Cal Poly Roborodentia competition. Woody’s goal is to score the most points in the competition by navigating the competition field, efficiently collecting ping pong balls from the racks, and shooting the balls into the goal accurately. There was no specific budget set for the project, but costs were kept low by using tools from the Computer Engineering Capstone Lab, inexpensive materials such as wood, and reusable parts from robots from previous Roborodentia competitions.

Mr. Robot: A Roborodentia Contestant, Stephen Berry, Jamie Nease

Computer Engineering

Roborodentia is an annual robotics competition held during Open House at California Polytechnic State University, San Luis Obispo. Each year, students construct autonomous robots which compete head-to-head to score the most points. This report will give an overview of the competition and the details of our robot.

Autonomous Golf Cart Vision Using Hsv Image Processing And Commercial Webcam, John D. Fulton

Electrical Engineering

Using openCV I was able to use a store bought webcam and my laptop to build code that could detect the lane lines and the curb on the road and use them to calculate a trajectory for an autonomous vehicle to follow. The code does have some flaws, as discovered in testing, and definitely room for improvement but it still functions as a useful basis for development. Developed primarily for the Autonomous Golf Car Project at Cal Poly the principles of how it functions could be applied to other projects that want to use computer vision.

Utilizing A Computational Model For The Design Of A Passive Dynamic Walker, Craig Alan Honeycutt

USF Tampa Graduate Theses and Dissertations

Recent interest in using passive dynamic walkers (PDWs) for gait rehabilitation studies has presented a need for a robust, easily built mechanism. Unfortunately, these passive robots are hypersensitive to many variables outside of the usual design considerations that are studied when constructing them. By accentuating previous failures instead of suppressing them, this thesis presents a number of problematic situations commonly experienced when testing and tuning a PDW.

Further, through a complete design of a 4-legged PDW with knees, simple design axioms brought about by myself and others are put into a practical context and applied directly to design. This thesis …

Reconode: Towards An Autonomous Multi-Robot Team Agent For Usar, Kang Li

Electronic Theses and Dissertations

Urban search and rescue (USAR) robots can benefit from small size as it facilitates movement in cramped quarters. Yet, small size limits actuator power, sensor payloads, computational capacity and battery life. We are alleviating these issues by developing the hardware and software infrastructure for high performance, heterogeneous, dynamically-reconfigurable miniature USAR robots, as well as a host of other relevant applications. In this thesis, a generic modular embedded system architecture based on the RecoNode multiprocessor is proposed, which consists of a set of hardware and software modules that can be configured to construct various types of robot systems for dynamic and …

A Computer Vision Application To Accurately Estimate Object Distance, Kayton B. Parekh

Mathematics, Statistics, and Computer Science Honors Projects

Scientists have been working to create robots that perform manual work for years. However, creating machines that can navigate themselves and respond to their environment has proven to be difficult. One integral task to such research is to estimate the position of objects in the robot's visual field.

In this project we examine an implementation of computer vision depth perception. Our application uses color-based object tracking combined with model-based pose estimation to estimate the depth of specific objects in the view of our Pioneer 2 and Power Wheels robots. We use the Camshift algorithm for color-based object tracking, which uses …

Design, Construction, And Testing Of A New Class Of Mobile Robots, Ivan Siles

All Theses

This thesis introduces a novel mobile robot design concept aimed at exploration of subterranean spaces. The key innovation is the combination of highly maneuverable body elements with wheel/leg elements (Whegs). This combination offers performance not possible with conventional 'monolithic' wheeled or tracked mobile robots, or with current robot snakes. The thesis covers four design iterations of the concept, concentrating on describing the overall design process and results from field tests. Additionally a kinematic analysis of the fourth prototype and implications for future designs is presented.

Analysis And Experiments For Tendril-Type Robots, Lara Cowan

All Theses

New models for the Tendril continuous backbone robot, and other similarly constructed robots, are introduced and expanded upon in this thesis. The ability of the application of geometric models to result in more precise control of the Tendril manipulator is evaluated on a Tendril prototype. We examine key issues underlying the design and operation of 'soft' robots featuring continuous body ('continuum') elements. Inspiration from nature is used to develop new methods of operation for continuum robots. These new methods of operation are tested in experiments to evaluate their effectiveness and potential.