Robotics Commons^™

Electronic Deer Warning System, David Zhuo, Anlang Lu

Computer Engineering

Deer-vehicle collisions (DVCs) are extremely dangerous, often injuring or even killing drivers. Unfortunately, this form of automotive accident is commonplace in the United States. According to the NHTSA, DVCs result in 200 human deaths a year.2

Despite these deadly incidents, there currently are no deployed federal or state systems for preventing DVCs. There are many consumer electronic deer deterrent products, but their long-term effectiveness is questionable.3 In fact, there does not appear to be much research into electronic deer deterrent systems. Aside from constant audio output and electric shock, no other means of electronic deterrent exist. Even if fixed deterrents …

Studying The Effects Of Serpentine Soil On Adapted And Non-Adapted Species Using Arduino Technology, Kiana Saniee, Edward Himelblau, Brian Paavo

STAR Program Research Presentations

Abstract: Serpentine soils are formed from ultramafic rocks and are represent an extreme environment for plants. Serpentine soils are unique in that they carry high concentrations of heavy metals, are nutrient deficient, particularly in calcium, and have poor water retention capabilities. Although these soils constitute harsh conditions for plant growth, there are a number of species that are adapted and even endemic to serpentine soil. Water retention by commercial potting mix was compared with serpentine soil. Also, serpentine adapted and non-adapted species were grown in both soil treatments and physiological data were collected. We used the Arduino electronic platform to …

Roborodentia Robot (Amazon Prime), Alec Cheung

Computer Science and Software Engineering

Roborodentia is an annual autonomous robotics competition sponsored and hosted by Cal Poly. In the 2016 competition, participants are to design a robot that scores the most points by gathering rings from marked supply pegs and placing them onto marked scoring pegs. For Roborodentia I designed, constructed, and programmed a robot, named Amazon Prime, to compete.

The Story Of Beyoncé: The Roborodentia 2016 Contestant, Brandon Arnold, Mana Kulkarni, Aaron Newberg, Jon Sleep

Computer Engineering

No abstract provided.

Senior Project: Control System For An Underwater Remotely Operated Vehicle, Tyler Mau, Joseph Mahoney

Computer Engineering

No abstract provided.

Roborodentia Robot: Tektronix, Sean Yap

Computer Engineering

Tektronix is a robot created to compete in the 2016 Roborodentia Competition. This report details the full function and implementation of the robot.

Roborodentia 2016: Scorpion, Tyler Whalen

Computer Engineering

This report showcases my entry into the Roborodentia 2016 competition, and my senior project. I chose this project because robotics has always interested me, and this was a great opportunity to jump in headfirst.

I will step through my design decisions and detail all information necessary for replicating this build.

A Stroke Therapy Brace Design, Evan Kirkbride

Electrical Engineering

Victims of stroke often have difficulty with rehabilitation. With limited movement on their affected arm, patients often do not want to move much for physical therapy. In this project, we design a robotic brace that helps stroke patients move their arm more effectively in a reaching or pulling motion. By giving patients more movement in their affected arm than they would have otherwise, patients gain more from rehabilitation. The brace also adapts to the patient’s needs, providing more inclination or resistance as needed for their physical therapy. This kind of therapy engages patients rather than relying on their likely dwindled …

Red Piston (Roborodentia), Gabriel Lee Hernandez, Davie Sy

Computer Science and Software Engineering

Roborodentia is an annual robotics competition held during Cal Poly’s Open House showcase. Teams of one to three people come together to build an autonomous robot to typically collect rings for points. The specifications of the competition will be detailed in the problem statement. For Roborodentia 2016, we built a machine dubbed Red Piston to tackle on this year’s competition. The following report will detail the design process and implementation of our robot.

Roborodentia Xxi Robot, Jose A. Villa

Computer Engineering

This report covers the design and implementation of a robot built to compete in Roborodentia 2016.

A Lidar Based Semi-Autonomous Collision Avoidance System And The Development Of A Hardware-In-The-Loop Simulator To Aid In Algorithm Development And Human Studies, Thomas F. Stevens

Master's Theses

In this paper, the architecture and implementation of an embedded controller for a steering based semi-autonomous collision avoidance system on a 1/10^th scale model is presented. In addition, the development of a 2D hardware-in-the-loop simulator with vehicle dynamics based on the bicycle model is described. The semi-autonomous collision avoidance software is fully contained onboard a single-board computer running embedded GNU/Linux. To eliminate any wired tethers that limit the system’s abilities, the driver operates the vehicle at a user-control-station through a wireless Bluetooth interface. The user-control-station is outfitted with a game-controller that provides standard steering wheel and pedal controls along …

Roborodentia Robot, Jordan Dykstra, Anibal Hernandez, Robert Prosser

Computer Engineering

This report provides details on the design and implementation of a robot for the Spring 2015 Roborodentia competition. The system is described from a software perspective, a hardware perspective, and a mechanical design perspective.

Printed Circuit Board For Introductory Animatronics Course, Preston Brown

Computer Engineering

For many years, freshmen Computer Engineering students at California Polytechnic State University have taken a course that introduces them to the “processes of electronics manufacturing. They are lectured on concepts such as CAD/CAM design, Design for Manufacture (DFM), documentation requirements, prototyping and production planning”. The laboratory portion of the course allows students to “use hands-on techniques to solidify knowledge of project planning, soldering, automation, hand tool usage and production methods” by manufacturing their own power supply, starting with aluminum sheets, a bag of components, and and an unassembled printed circuit board (PCB).

While the project is popular among students, department …

Roborodentia Robot 2015, Travis Stuever

Computer Engineering

The Roborodentia 2015 competition was a ring based challenge that had participants move PVC rings from one side of a course to another all within 3 minutes. In order to succeed in this competition there needs to be a good robotic design, thought out use cases, and good solid software.

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Pl-X (Roborodentia), Kelly Leung, William Luo, Jeffrey Tang

Computer Engineering

Pl-x is the name of the robot that will be competing in Roborodentia, an annual autonomous robot competition. This year the competition involves moving rings from one end of a course to the opposite end of the course.

Innovative Connectivity Ensuring Education (I.-C.E.E.), Luke Cole, Andrew Ma, Nicholas Ross, Daniel Williams

Electrical Engineering

This is the critical design review for the Telepresence/Telerobotic Technology for Children with Disabilities Project by team I.- C.E.E. (Innovative Connectivity Ensuring Education). This report details our telepresence system design for our client (Nathan Stilts) including design choices/justification, testing verification and procedures, and chosen components for implementation. There are seven chapters in total starting with introductory/background information followed by hardware and software design, verification, and testing and concludes with the current status of the project and what future work may need to be included.

Telepresence: Design, Implementation And Study Of An Hmd-Controlled Avatar With A Mechatronic Approach, Darren Michael Chan

Master's Theses

Telepresence describes technologies that allow users to remotely experience the sensation of being present at an event without being physically present. An avatar exists to represent the user whilst in a remote location and is tasked to collect stimuli from its immediate surroundings to be delivered to the user for consumption. With the advent of recent developments in Virtual Reality technology, viz., head-mounted displays (HMDs), new possibilities have been enabled in the field of Telepresence. The main focus of this thesis is to develop a solution for visual Telepresence, where an HMD is used to control the direction of a …

Stereo Vision System Module For Low-Cost Fpgas For Autonomous Mobile Robots, Connor Citron

Master's Theses

Stereo vision uses two adjacent cameras to create a 3D image of the world. A depth map can be created by comparing the offset of the corresponding pixels from the two cameras. However, for real-time stereo vision, the image data needs to be processed at a reasonable frame rate. Real-time stereo vision allows for mobile robots to more easily navigate terrain and interact with objects by providing both the images from the cameras and the depth of the objects. Fortunately, the image processing can be parallelized in order to increase the processing speed. Field-programmable gate arrays (FPGAs) are highly parallelizable …

Robotic Book Scanner, Tobias Samuel Elder, Cynthia Marie Wong

Computer Engineering

Digitizing books has been an issue tackled by companies to allow people to read off Kindles and iPads rather than the traditional paperback. Companies like Google have spent more than $1000 on machines to convert books into electronic copies readable on devices. Yet, not much effort has been made into the invention of an automatic book scanner for consumers. This project seeks to determine a cost-effective approach to robotic book scanning to create PDFs from physical books. This project serves as a proof of concept for a reasonably priced automatic book scanner accessible to consumers. Potentially, the device may be …

Automated Foosball Table, Jim R. Stefani, Alex J. Herpy, Brett Gordon Jaeger, Kevin S. Haydon, Derek Alan Hamel

Mechanical Engineering

This project is the second iteration of an automated foosball table for Yaskawa America as a trade show display. The table is meant to provide an interactive experience which highlights the speed and precision of the Yaskawa hardware. The first iteration of the project was mainly focused on creating the physical hardware for the system and to begin the basic programming for the system. This phase of the project was focused on finalizing the physical hardware of the system, implementing the vision system and to continue the basic programing of the system AI. A third team will be assigned to …

Conception, Design And Construction Of A Remote Wifi Vehicle Using Arduino, Clayton Broman

Physics

The scope of this senior project was to make a wireless vehicle controlled via Internet Protocol. This vehicle operates remotely and without direct line of sight. Commands are sent from a program running on a laptop and transmitted using a wireless router. Visual data is retrieved from a network camera, mounted on the vehicle, in real-time, to see where you are going.

Remote/Autonomous Sentry Gun Platform, Angelo Gagliardi, Dante Gagliardi

Electrical Engineering

This senior project involves the complete system design and construction of a "Nerf" sentry gun to replace an armed guard. We aimed to develop a compact and highly mobile defense system that allows operational flexibility. The sentry gun can autonomously track and shoot at moving targets, while also allowing a user to remotely access and control the gun via computer. The mobility, hardiness, and functionality of this system allows a reliable replacement for human beings in harsh and hostile environments; ultimately sparing a life.

Bruno The Robotic Bear, Aaron Brauner, Ian Panzer

Computer Engineering

Creating homemade robots are becoming a popular hobby among engineers. With the dramatic reduction in costs over the past few decades, it is finally possible to build a personal automated mailbox. Microcontrollers needed to function as the brains of the robot are also becoming powerful enough that relatively complicated instructions could be programmed into the robot to handle a plethora of sensors and peripherals. In order to demonstrate how the Computer Engineering department models the synthesis of computer science and electrical engineering, the topic chosen was robotics, specifically, a stuffed bear robot.

The microcontroller chosen was the Arduino Mega 2560 …

Flarebot - Analysis Of An Autonomous Robot, Sanat S. Sahasrabudhe

Computer Engineering

Autonomous robots are increasing in popularity for educational, research, and household purposes. This report analyzes the design and functionality of one such example, called FlareBot, which is designed to self-navigate and stack cans. Specifically, the robot is designed to follow a fixed path for navigation, and stack any cans it comes across. Once a maximum number of cans is stacked, the robot releases them and restarts the process. The design is achieved using three DC motors, two servo motors, one line sensor, and one infrared sensor. Designing autonomous robots is a strong test of the engineering design process, which includes …

Automatic Site Reconstruction With A Mobile Robot And Scanning Laser Proximity Sensor, Erik Nelson, Sean Willis, Nathan Lucero

Computer Engineering

Leading research in robotics, especially in the areas of computer vision, planning, and probabilistic learning, require a mobile robot platform to program. The design and construction of such a platform is a laborious task, calling upon knowledge from many branches of engineering. Additionally, hot research topics in robotics such as vision-based Simultaneous Localization and Mapping (SLAM), advanced trajectory planning algorithms, and adaptive control for collision avoidance contain algorithms that build upon a localization and mapping architecture which is time-consuming to program in itself. To bring future senior project teams from Cal Poly's computer engineering and computer science departments closer to …

Robotic Kinect Bear, Spencer Lines, Dennis Waldron, Sagiv Sheelo

Computer Engineering

The goal of this project was to create an interactive 53”-tall robotic teddy bear to showcase various aspects of Cal Poly’s computer engineering degree. The interactive element took the form of a Microsoft Kinect for Windows sensor, which provided body and face position tracking of the user. Using this sensor and various other elements, we successfully made a teddy bear which mirrors a user's face and arm positions in real-time.

Cpe 200: Small Bear Project, David Burke, Devin Tang

Computer Engineering

CPE 200 is an elective course designed for sophomores in the Computer Engineering Department. This project was intended to design the class, such that, students will understand the skills a computer engineer develops and how to apply those skills.

Caddy: A 2005 Roborodentia Entry With Vision And Path Planning Abilities, Taylor Braun-Jones

Computer Engineering

Roborodentia is an autonomous robotics competition held each year during Cal Poly’s Open House. For the 2005 competition, robot entries needed to navigate a maze searching for three randomly placed golf balls, collect them, and then deposit the balls in the “nest” at the end of the maze. A newly added aspect for the 2005 competition included two bonus balls that were placed on a platform behind the wall in two predetermined corners of the maze.

Caddy is a robot that was entered into the 2005 Roborodentia competition. Caddy included a vision system that allowed searching for balls down untraveled …

Mapping And Visualizing Ancient Water Storage Systems With An Rov – An Approach Based On Fusing Stationary Scans Within A Particle Filter, William D. Mcvicker

Master's Theses

This paper presents a new method for constructing 2D maps of enclosed un- derwater structures using an underwater robot equipped with only a 2D scanning sonar, compass and depth sensor. In particular, no motion model or odometry is used. To accomplish this, a two step offline SLAM method is applied to a set of stationary sonar scans. In the first step, the change in position of the robot between each consecutive pair of stationary sonar scans is estimated using a particle filter. This set of pair wise relative scan positions is used to create an estimate of each scan’s position …