Robotics Commons^™

Computer-Based Stereoscopic Parts Recognition For Robotic Applications, Ahmad A. Fayed

UNLV Theses, Dissertations, Professional Papers, and Capstones

Most of robotic handling and assembly operations are based on sensors such as range and touch sensors. In certain circumstances, such as in the presence of ionizing radiation where most customary sensors will degrade over time due to radiation exposure, these sensors won't function properly. Utilizing two or more cameras (stereo vision) located outside the target zone and analyzing their images to identify location and dimensions of parts within the robot workspace is an alternative for using sensors. Object Recognition is affected by the light condition which oftentimes causes the gray-scale or red, green, and blue values to have a …

Navigation & Control Of An Automated Swath Surface Vessel For Bathymetric Mapping, Ketan Rasal

Mechanical Engineering Master's Theses

With the abundant amount of water on the earth, the study of underwater terrain plays an important role in the use and sustainability of marine resources. A wide variety of technical systems are used to collect such bathymetric data, and autonomous vehicles are being explored as a manner in which to make this process more cost-effective. Students in Santa Clara University's Robotic Systems Laboratory are contributing to this effort through the development of an autonomous SWATH boat that can create such maps. As part of this thesis work, the navigation and control system of this SWATH boat has been significantly …

Adaptive Nonlinear Control For Autonomous Ground Vehicles, William Spencer Black

Open Access Theses

We present the background and motivation for ground vehicle autonomy, and focus on uses for space-exploration. Using a simple design example of an autonomous ground vehicle we derive the equations of motion. After providing the mathematical background for nonlinear systems and control we present two common methods for exactly linearizing nonlinear systems, feedback linearization and backstepping. We use these in combination with three adaptive control methods: model reference adaptive control, adaptive sliding mode control, and extremum-seeking model reference adaptive control. We show the performances of each combination through several simulation results. We then consider disturbances in the system, and design …

Analysis Of An Actuated Two Segment Leg Model Of Locomotion, Nikhil Vinayak Rao

Open Access Theses

Research studies on dynamic models of legged locomotion have generally focused on telescoping-type leg models. Such telescoping spring loaded inverted pendulum (SLIP) models have been able to accurately predict observed center of mass (CoM) trajectories. There have been comparatively fewer studies on dynamics of locomotion

with segmented legs. Some earlier studies on the dynamics due to leg segmentation appear straightforward. For example, a simple model with the only joint moment being due to a passive springy knee has been shown to behave similarly to a telescoping spring-mass model. However, in real-life animal locomotion, there are multiple joint-moments acting at the …

Human Intention Recognition Based Assisted Telerobotic Grasping Of Objects In An Unstructured Environment, Karan Hariharan Khokar

USF Tampa Graduate Theses and Dissertations

In this dissertation work, a methodology is proposed to enable a robot to identify an object to be grasped and its intended grasp configuration while a human is teleoperating a robot towards the desired object. Based on the detected object and grasp configuration, the human is assisted in the teleoperation task. The environment is unstructured and consists of a number of objects, each with various possible grasp configurations. The identification of the object and the grasp configuration is carried out in real time, by recognizing the intention of the human motion. Simultaneously, the human user is assisted to preshape over …

Polygrasp: Reach; Myoelectric Prosthetic Hand Iteration, Devon Patrick Augustus, Mighells Blaed Deuel, Ian Noel Fraser, Nicholas Philip Moesser

Mechanical Engineering

Amputations are a common occurrence in soldiers returning home who have suffered the effects of IED and munitions explosions. For upper limb amputees, trans-radial amputations are the most common. Traditional hook devices do not offer an adequate level of normalcy for users, prompting the use of myoelectric devices. While current myoelectric devices do offer a more natural experience, they come with a host of other problems that makes their adoption by service personnel not desirable or not permitted by the VA. PolyGrasp Reach seeks to reduce weight and cost and improve performance. This addresses several of the issues with devices …

Detection Of Diffuse Sea Floor Venting Using Structured Light Imaging, Gabrielle Inglis, Clara Smart, Christopher Roman, Steven Carey

Graduate School of Oceanography Faculty Publications

Efficiently identifying and localizing diffuse sea floor venting at hydrothermal and cold seep sites is often difficult. Actively venting fluids are usually identified by a temperature induced optical shimmering seen during direct visual inspections or in video data collected by vehicles working close to the sea floor. Relying on such direct methods complicates establishing spatial relations between areas within a survey covering a broad area. Our recent work with a structured light laser system has shown that venting can also be detected in the image data in an automated fashion. A structured light laser system consists of a camera and …

Remote Analysis Of Grain Size Characteristic In Submarine Pyroclastic Deposits From Kolumbo Volcano, Greece, Clara Smart, D. P. Whitesell, Christopher N. Roman, Steven Carey

Graduate School of Oceanography Faculty Publications

Grain size characteristics of pyroclastic deposits provide valuable information about source eruption energetics and depositional processes. Maximum size and sorting are often used to discriminate between fallout and sediment gravity flow processes during explosive eruptions. In the submarine environment the collection of such data in thick pyroclastic sequences is extremely challenging and potentially time consuming. A method has been developed to extract grain size information from stereo images collected by a remotely operated vehicle (ROV). In the summer of 2010 the ROV Hercules collected a suite of stereo images from a thick pumice sequence in the caldera walls of Kolumbo …

Robotic Turret, Daniel Romero, Matthew (Matt) Martelle, Scott Mullens, Rachel Diamant

Mechanical Engineering

No abstract provided.

Concept Tests For A New Wire Flying Vehicle Designed To Achieve High Horizontal Resolution Profiling In Deep Water, Chris Roman, Dave Hebert

Graduate School of Oceanography Faculty Publications

Efficiently profiling the water column to achieve both high vertical and horizontal resolution from a moving vessel in deep water is difficult. Current solutions, such as CTD tow-yos, moving vessel profilers, and undulating tow bodies, are limited by ship speed or water depth. As a consequence, it is difficult to obtain oceanographic sections with sufficient resolution to identify many relevant scales over the deeper sections of the water column. This paper presents a new concept for a profiling vehicle that slides up and down a towed wire in a controlled manner using the lift created by wing foils. The wings …

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

Development Of High Resolution Sea Floor Mapping Tools And Techniques, Gabrielle Inglis, J. Ian Vaughn, Clara Smart, Christopher N. Roman

Graduate School of Oceanography Faculty Publications

There is a persistent need for high resolution photographic and bathymetric maps of the sea floor for many research areas in marine geology, biology and archaeology. This poster will present recent work using high frequency multibeam sonars, stereo vision and structured light laser imaging techniques to create maps with centimeter resolution for these applications. This research involves the development of new image and sonar processing techniques that combat the typical difficulties of imperfect navigation information, limited sensor ranges and adverse environmental conditions associated with using marine robotic vehicles in the ocean. Data for this work has been collected with the …

Robust Region Tracking In Multi-Agent Systems Utilizing Sliding Mode Control: Theory And Applications, Mark Bacon

Master's Theses

This thesis presents a methodology to bring controlled agents within a moving region despite agent interaction dynamics, uncertain forces and parameter variation. The logic is derived from traditional Sliding Mode Control theory with an expanded boundary layer which allows position deviation from the region center to specified bounds. As an example of the utility of this control, multiple methods of herding (controlling passive agents by appropriate positioning of controlled agents) are presented.

Autonomous Mobility And Manipulation Of A 9-Dof Wmra, William Garrett Pence

USF Tampa Graduate Theses and Dissertations

The wheelchair-mounted robotic arm (WMRA) is a 9-degree of freedom (DoF) assistive system that consists of a 2-DoF modified commercial power wheelchair and a custom 7-DoF robotic arm. Kinematics and control methodology for the 9-DoF system that combine mobility and manipulation have been previously developed and implemented. This combined control allows the wheelchair and robotic arm to follow a single trajectory based on weighted optimizations. However, for the execution of activities of daily living (ADL) in the real-world environment, modified control techniques have been implemented.

In order to execute macro ADL tasks, such as a "go to and pick up" …

Utilizing A Computational Model For The Design Of A Passive Dynamic Walker, Craig Alan Honeycutt

USF Tampa Graduate Theses and Dissertations

Recent interest in using passive dynamic walkers (PDWs) for gait rehabilitation studies has presented a need for a robust, easily built mechanism. Unfortunately, these passive robots are hypersensitive to many variables outside of the usual design considerations that are studied when constructing them. By accentuating previous failures instead of suppressing them, this thesis presents a number of problematic situations commonly experienced when testing and tuning a PDW.

Further, through a complete design of a 4-legged PDW with knees, simple design axioms brought about by myself and others are put into a practical context and applied directly to design. This thesis …

Autonomous Underwater Vehicles As Tools For Deep-Submergence Archaeology, Christopher N. Roman, Ian Roderick Mather

Graduate School of Oceanography Faculty Publications

Marine archaeology beyond the capabilities of scuba divers is a technologically enabled field. The tool suite includes ship-based systems such as towed side-scan sonars and remotely operated vehicles, and more recently free-swimming autonomous underwater vehicles (AUVs). Each of these platforms has various imaging and mapping capabilities appropriate for specific scales and tasks. Broadly speaking, AUVs are becoming effective tools for locating, identifying, and surveying archaeological sites. This paper discusses the role of AUVs in this suite of tools, outlines some specific design criteria necessary to maximize their utility in the field, and presents directions for future developments. Results are presented …

Application Of Structured Light Imaging For High Resolution Mapping Of Underwater Archaeological Sites, Chris Roman, Gabrielle Inglis, James Rutter

Graduate School of Oceanography Faculty Publications

This paper presents results from recent work using structured light laser profile imaging to create high resolution bathymetric maps of underwater archaeological sites. Documenting the texture and structure of submerged sites is a difficult task and many applicable acoustic and photographic mapping techniques have recently emerged. This effort was completed to evaluate laser profile imaging in comparison to stereo imaging and high frequency multibeam mapping. A ROV mounted camera and inclined 532 nm sheet laser were used to create profiles of the bottom that were then merged into maps using platform navigation data. These initial results show very promising resolution …

Augmented Reality Navigation Interfaces Improve Human Performance In End-Effector Controlled Telerobotics, Keshav Chintamani

Wayne State University Dissertations

On the International Space Station (ISS) and space shuttles, the National Aeronautics and Space Administration (NASA) has used robotic manipulators extensively to perform payload handling and maintenance tasks. Teleoperating robots require expert skills and optimal performance is crucial to mission completion and crew safety. Degradation in performance is observed when manual control is mediated through remote camera views, resulting in poor end-effector navigation quality and extended task completion times. This thesis explores the application of three-dimensional augmented reality (AR) interfaces specifically designed to improve human performance during end-effector controlled teleoperations. A modular telerobotic test bed was developed for this purpose …

Towards Supervised Autonomous Task Completion Using An In Vivo Surgical Robot, Jason J. Dumpert

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Laparoscopy is a minimally invasive alternative to traditional abdominal surgery. Unlike traditional surgery, a laparoscopic procedure can be completed using small incisions. The use of these small incision results in reduced pain to the patient, shorter recovery times, and less trauma to skin, muscle and other tissues. However, these benefits to the patient are offset by the increased difficulty to the surgeon performing the procedure. These difficulties include reduced dexterity, reduced perception, and longer procedure times. The use of small in vivo robotic devices in minimally invasive surgery is one possible solution to these problems. The movement of these devices …

Development Of A New Lagrangian Float For Studying Coastal Marine Ecosystems, Alex Schwithal, Chris Roman

Graduate School of Oceanography Faculty Publications

This paper presents an overview and initial testing results for a shallow water Lagrangian float designed to operate in coastal settings. The presented effort addresses the two main characteristics of the shallow coastal environment that preclude the direct of use of many successfully deep water floats, namely the higher variation of water densities near the coast compared with the open ocean and the highly varied bathymetry. Our idea is to develop a high capacity dynamic auto-ballasting system that is able to compensate for the expected seawater density variation over a broad range of water temperatures and salinities while using measurements …

The 2005 Chios Ancient Shipwreck Survey: New Methods For Underwater Archaeology, Brendan P. Foley, Katerina Dellaporta, Dimitris Sakellariou, Brian S. Bingham, Richard Camilli, Ryan M. Eustice, Dionysis Evagelistis, Vicki Lynn Ferrini, Kostas Katsaros, Dimitris Kourkoumelis, Aggelos Mallios, Paraskevi Micha, David A. Mindell, Christopher Roman, Hanumant Singh, David S. Switzer, Theotokis Theodoulou

Graduate School of Oceanography Faculty Publications

In 2005 a Greek and American interdisciplinary team investigated two ship wrecks off the coast of Chios dating to the 4th-century B.C. and the 2nd/lst century. The project pioneered archaeological methods of precision acoustic, digital image, and chemical survey using an autonomous underwater vehicle (AUV) and in-situ sensors, increasing the speed of data acquisition while decreasing costs. The AUV recorded data revealing the physical dimensions, age, cargo, and preservation of the wrecks. The earlier wreck contained more than 350 amphoras, predominantly of Chian type, while the Hellenistic wreck contained about 40 Dressel 1C amphoras. Molecular biological analysis of two amphoras …

Heterogeneous Drive Mechanisms For Novel Locomotion In Rough Terrain, Roy Godzdanker

Electronic Theses and Dissertations

The smaller the robot the easier it is for it to access voids in a collapsed structure, however small size brings a host of other problems related to constrained resources. One of the primary constraints on small robots is limited motive power to surmount obstacles and navigate rough terrain. This thesis examines the addition of bulk motive force actuators to existing locomotion platforms and the impact of these heterogeneous actuators on conventional steering methods. The steering methods examined are those associated with skid steered vehicles and differential drive vehicles. In developing the Crabinator, a robot composed of a limbed crawler …

Deep Sea Underwater Robotic Exploration In The Ice-Covered Arctic Ocean With Auvs, Clayton Kunz, Chris Murphy, Richard Camilli, Hanumant Singh, John Bailey, Ryan M. Eustice, Chris Roman, Michael Jakuba, Claire Willis, Taichi Sato, Ko-Ichi Nakamura, Robert A. Sohn

Graduate School of Oceanography Faculty Publications

The Arctic seafloor remains one of the last unexplored areas on Earth. Exploration of this unique environment using standard remotely operated oceanographic tools has been obstructed by the dense Arctic ice cover. In the summer of 2007 the Arctic Gakkel Vents Expedition (AGAVE) was conducted with the express intention of understanding aspects of the marine biology, chemistry and geology associated with hydrothermal venting on the section of the mid-ocean ridge known as the Gakkel Ridge. Unlike previous research expeditions to the Arctic the focus was on high resolution imaging and sampling of the deep seafloor. To accomplish our goals we …

Byzantium Beneath The Black Sea, Bridget Buxton, Robert Ballard, Michael Brennan, Dwight Coleman, Katy Croff, Christopher Roman, Dan Davis, Dennis Piechota, Sergiy Voronov

Graduate School of Oceanography Faculty Publications

This poster reports on the August 2007 Black Sea Expedition of the Institute for Archaeological Oceanography at the University of Rhode Island (IAO) and the Institute for Exploration (IFE), in collaboration with the Department of the Underwater Heritage of Ukraine. This year’s work marks a new phase in a multi-year (2000–2012) archaeological and oceanographic survey of the Black Sea. 2007 fieldwork focuses on two Byzantine shipwrecks. The 10th century C.E. shipwreck Chersonesos A (discovered in 2006) lies at 140 m depth in the suboxic zone off the Crimean peninsula. The ship carried a cargo of one-handled jars of a widely …

A Fuzzy Logic Controller For Autonomous Wheeled Vehicles, Mohamed Trabia, Linda Z. Shi, Neil Eugene Hodge

Mechanical Engineering Faculty Research

Autonomous vehicles have potential applications in many fields, such as replacing humans in hazardous environments, conducting military missions, and performing routine tasks for industry. Driving ground vehicles is an area where human performance has proven to be reliable. Drivers typically respond quickly to sudden changes in their environment. While other control techniques may be used to control a vehicle, fuzzy logic has certain advantages in this area; one of them is its ability to incorporate human knowledge and experience, via language, into relationships among the given quantities. Fuzzy logic controllers for autonomous vehicles have been successfully applied to address various …

Power-Scavenging Mems Robots, Daniel J. Denninghoff

Theses and Dissertations

This thesis includes the design, modeling, and testing of novel, power-scavenging, biologically inspired MEMS microrobots. Over one hundred 500-μm and 990-μm microrobots with two, four, and eight wings were designed, fabricated, characterized. These microrobots constitute the smallest documented attempt at powered flight. Each microrobot wing is comprised of downward-deflecting, laser-powered thermal actuators made of gold and polysilicon; the microrobots were fabricated in PolyMUMPs® (Polysilicon Multi-User MEMS Processes). Characterization results of the microrobots illustrate how wing-tip deflection can be maximized by optimizing the gold-topolysilicon ratio as well as the dimensions of the actuator-wings. From these results, an optimum actuator-wing configuration was …

Physical Intelligent Sensors, Pavan Bandhil, Sanjeevi Chitikeshi, Ajay Mohan Mahajan, Fernando Figueroa

Mechanical Engineering Faculty Research

This paper proposes the development of intelligent sensors as part of an integrated systems approach, i.e. one treats the sensors as a complete system with its own sensing hardware (the traditional sensor), A/D converters, processing and storage capabilities, software drivers, self-assessment algorithms, communication protocols and evolutionary methodologies that allow them to get better with time. Under a project being undertaken at the NASA s Stennis Space Center, an integrated framework is being developed for the intelligent monitoring of smart elements. These smart elements can be sensors, actuators or other devices. The immediate application is the monitoring of the rocket test …

Comparison Of Two Distributed Fuzzy Logic Controllers For Flexible-Link Manipulators, Linda Z. Shi, Mohamed Trabia

Mechanical Engineering Faculty Presentations

The paper suggests that fuzzy logic controllers present a computationally efficient and robust alternative to conventional controllers. The paper presents two possible structures for the distributed fuzzy logic controller of a single-link flexible manipulator. A linear quadratic regulator method is used to prove the effectiveness of fuzzy logic controllers.

Robust Course-Boundary Extraction Algorithms For Autonomous Vehicles, Chris Roman, Charles Reinholtz

Graduate School of Oceanography Faculty Publications

Practical autonomous robotic vehicles require dependable methods for accurately identifying course or roadway boundaries. The authors have developed a method to reliably extract the boundary line using simple dynamic thresholding, noise filtering, and blob removal. This article describes their efforts to apply this procedure in developing an autonomous vehicle.

Variable Structure End Point Control Of A Flexible Manipulator, Shailaja Chenumalla, Sahjendra N. Singh

Electrical & Computer Engineering Faculty Research

We treat the question of control and stabilization of the elastic multibody system developed in the Phillips Laboratory, Edwards Air Force Base, California. The controlled output is judiciously chosen such that the zero dynamics are stable or almost stable. A variable structure control (VSC) law is derived for the end point trajectory control. Although, the VSC law accomplishes precise end point tracking, elastic modes are excited during the maneuver of the arm. A Linear stabilizer is designed for the final capture of the terminal state.