Hardware Systems Commons^™

Weight Controlled Electric Skateboard, Zachary Barram, Carson Bertozzi, Vishnu Dodballapur

Computer Engineering

Technology and the way that humans interact is becoming more vital and omnipresent with every passing day. However, human interface device designers suffer from the increasingly popular “designed for me or people like me” syndrome. This design philosophy inherently limits accessibility and usability of technology to those like the designer. This places severe limits of usability to those who are not fully able as well as leaves non-traditional human interface devices unexplored. This project set out to explore a previously uncharted human interface device, on an electric skateboard, and compare it send user experience with industry leading human interface devices.

Planr.: Planar Learning Autonomous Navigation Robot, Gabrielle S. Santamorena, Daniel Kasman, Jesus Mercado, Ben Klave, Andrew Weisman, Anthony Fortner

Computer Engineering

PLANR is a self-contained robot capable of mapping a space and generating 2D floor plans of a building while identifying objects of interest. It runs Robot Operating System (ROS) and houses four main hardware components. An Arduino Mega board handles the navigation, while an NVIDIA Jetson TX2, holds most of the processing power and runs ROS. An Orbbec Astra Pro stereoscopic camera is used for recognition of doors, windows and outlets and the RPLiDAR A3 laser scanner is able to give depth for wall detection and dimension measurements. The robot is intended to operate autonomously and without constant human monitoring …

Tidalsim Senior Project Report, Kent Zhang, Colin Vandervoort

Computer Engineering

Throughout the course of this project, our team helped the Cal Poly Biological Sciences department refine an intertidal zone simulator. The aim of this device is to allow any marine biologist to easily simulate a vast range of tidal zones in order to test animal behaviors within these zones. Another goal of this project is to make each simulation tank independent from the others by using a single microcontroller to handle all inputs and outputs of the system as well as logging all relevant data. The current system is set up so that a separate microcontroller handles dissolved oxygen and …

Smart Dc Wall Outlet Design With Improved Load Voltage Detection, Patrick Donovon Granieri

Master's Theses

A standard home in the United States has access to the 120V AC power grid for use with home appliances. Many electronics used at home are powered by a DC power supply, which loses energy in the conversion from AC power. The DC House project avoids any conversion between AC and DC by storing energy in batteries as DC power and supplying it directly to DC appliances. While AC systems feature a standardized output voltage, no such standard exists for DC systems. The Smart DC Wall Outlet solves this by automatically adjusting its output voltage to meet any required DC …

An Fpga Implementation Of Digital Guitar Effects, Carson James Robles

Computer Engineering

One of the most versatile aspects of the electric guitar is its ability to change its sound completely and on-the-fly through the use of effects pedals. Conventional guitar pedals contain one effect and can be chained together. The goal of this project is to serve as a contained multi-effects station with five popular electric guitar effects packed into one product. On top of this, the effects each have two tunable parameters to allow users to dial in the exact tone they are looking for. All of the signal processing done in this project is conducted on an FPGA which also …

Genetic Algorithm Amplifier Biasing System (Gaabs): Genetic Algorithm For Biasing On Differential Analog Amplifiers, Sean Whalen

Computer Engineering

Genetic Algorithm Amplifier Biasing System (GAABS) - Senior Project Analysis

Summary of Functional Requirements

This project integrates LTSpice with a python script that runs a genetic algorithm to bias a differential amplifier. The system biases the amplifier with 2 different voltages, the base voltage for the PNP BJTs of the active loads and a voltage controlling the current of the current sink. The project runs via a python script, gets data from LTSpice’s command line call, and iteratively runs until the system is biased to achieve the greatest gain on an arbitrary input voltage.

Primary Constraints

Some of the main …

Home Weather Station, Jarrett William Corr

Computer Engineering

This senior project implements a mobile weather station that can relay weather data to an indoor module with an LCD display. The outdoor module utilizes a temperature, humidity, and pressure sensor to collect atmospheric weather data and a radio transceiver to transmit the data to a display station via radio frequency communications. The indoor station displays the temperature, humidity and time with an LCD display. The indoor station has a settings menu which allows the user to configure the unit of measurement for the temperature and time where the device is located.

"Dual Peaks" Analog Distortion Guitar Effects Pedal, Dave Raul Breuer

Computer Engineering

The Dual Peaks distortion pedal is an analog effects pedal for electric guitar that distorts and boosts the guitar signal in order to achieve tonal characteristics often heard in music genres such as blues, rock, hard rock, and metal. Dual Peaks aims to remedy the current distortion pedal design, and provide a new spin not often provided in the majority of pedals. Dual Peaks contains two separate distortion channels which provide the player with a vast array of distortion and overdrive tones at the press of a switch. Also, Dual Peaks has a "noise gate" and 3-band equalizer circuits built …

The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette

Master's Theses

As wireless protocols become easier to implement, more products come with wireless connectivity. This latest push for wireless connectivity has left a gap in the development of the security and the reliability of some protocols. These wireless protocols can be used in the growing field of IoT where wireless sensors are used to share information throughout a network. IoT is being implemented in homes, agriculture, manufactory, and in the medical field. Disrupting a wireless device from proper communication could potentially result in production loss, security issues, and bodily harm. The 802.15.4/ZigBee protocol is used in low power, low data rate, …

Dynamic Video Streaming For Nano Quadcopters, Shane Daniel Kent, Ryan Weideman, Nicholas Kimball

Computer Engineering

The objective of this project was to develop a system that streams real-time video from a Crazyflie 2.0 nano quadcopter. We discuss the motivation behind the project including applications to swarm robotics and computer vision research. We highlight the initial research and design goals that guided the development of the system such as hardware selection and system specifications. We detail the software and hardware subsystems that we implemented including the video-streaming board, firmware, and video-streaming user application. We examine the performance of the final system and discuss the limitations imposed by the hardware. We conclude by describing future work that …

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …

Lionfish Detection System, Carmelo Furlan, Andrew Boniface

Computer Engineering

Deep neural networks have proven to be an effective method in classification of images. The ability to recognize objects has opened the door for many new systems which use image classification to solve challenging problems where conventional image classification would be inadequate. We trained a large, deep convolutional neural network to identify lionfish from other species that might be found in the same habitats. Google’s Inception framework served as a powerful platform for our fish recognition system. By using transfer learning, we were able to obtain exceptional results for the classification of different species of fish. The convolutional neural network …

Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr

Electrical Engineering

The Portable High-definition Audio Spectrum Analyzer (PHASA) allows the user to visualize the audio frequency spectrum of an incoming line-level stereo audio signal. Upon pressing the touch screen spectrum graph, the PHASA displays the corresponding frequency and volume levels as well as crosshairs at the touched location. The PHASA features multiple left/right channel display modes— Left channel only, right channel only, both channels simultaneously, and the average between the two channels. The PHASA features multiple resolution display modes (standard-resolution and high-resolution) and multiple dynamics display modes (standard dynamics, averaging, and peak/hold). The PHASA accepts input audio via a 1/4" TRS …

Bicycle Power Meter, Andrew Mcguan

Computer Engineering

A power meter is a cycling training tool used to record the power a rider is outputting. This is very useful to athletes who regularly do bike workouts, because the power output is a consistent measure of the rider’s effort level, and is not affected by outside factors such as wind or road gradient. If a cyclist does a workout with the intent to carry a certain speed for a certain amount of time, a strong headwind will slow them down and make them work harder to maintain the same speed, defeating the goal of the workout. When a power …

Real-Time Audio-Midi Controller, Brian Shino Balberchak

Computer Engineering

Most MIDI controllers used in music production use a regular keyboard to generate the MIDI notes that are sent to the synthesizer. This project aims to provide the user with a different way of generating MIDI data: by playing an instrument of their choice with a passive electronic pickup to generate MIDI notes that correspond with the fundamental frequency of the musical pitch being played. The pitch-detecting algorithm used in this application utilizes a modified form of auto-correlation.

As an embedded systems project that uses signal-processing techniques, the knowledge of topics from the following courses was essential:

EE 211: Op-Amp …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Skin Tone Tracking Device (Chromaband), Ziyang Bian

Computer Engineering

It’s long been said that your skin is a window into your health and with many illnesses the first signs of trouble actually show up in your skin. So if we have this natural warning system, then why isn’t anyone able to effectively use it to predict changes in our health? The problem is that currently there is no reliable way to accurately measure the change in skin tone and how these changes may or may not change with variations in health. This project’s aim is to design and develop a device that will record the changes in a user’s …

Smartfarm, Nathan A. Oto, Caleb Fink

Computer Engineering

The overall expectation of this product is to create an autonomous Arduino library that accurately and robustly collects plant environment data from the Smart Farm board. The Smart Farm PCB is split into two primary functions: Data Acquisition(DAQ) and Power Control. Each function of the PCB is controlled by an Atmega 328P Microcontroller. The primary concern for this report is the functionality of the DAQ microcontroller.

Smartgarden, Samuel S. Lees, Matthew T. Lindly

Computer Engineering

The problem that the SmartGarden project seeks to solve is the challenge of watering succulents correctly and maintaining consistent plant health. Too much water can cause root rot and drowning while too little water can cause dehydration and starvation.
The SmartGarden solves this common problem by configuring a Raspberry Pi to measure soil moisture, store the data to an AWS server in the cloud, and water the succulent when necessary, informing the user by providing both a web-interface and a variety of notifications.

Joe On The Go, Nico Ledwith, Grayson Meurrens

Computer Engineering

The ultimate goal for this project is to design an automatic, large capacity coffee maker. The system should be able to detect when a cup or mug is in position to receive coffee, then dispense a cup’s worth (~ 8oz) of coffee. When the coffee in the urn is getting low, our system should be able to allow a person to put new coffee grounds in the top, then push a button to start the coffee brewing process. More specifically, we had to accomplish the following tasks in order to meet our goals: solving the issue of transporting water from …

Mr. Mix: The Automated Home Bartender, Brian Moore, Robert Hulbert

Computer Engineering

No abstract provided.

Daily Dose, Ken H. Yasui, Joey M. Angeja

Computer Engineering

The project goal is to develop a medication and vitamin management device that will sort and dispense pre-configured amounts of pills at designated times . The main clientele of this device is the elderly community with a secondary client base of the general public. The entire system is designed from scratch, powered by US standard line voltage. The main functionalities of the device are the ability to store multiple types of pills and the ability to accurately handle user input and data transfer. The two engineering specifications that were not met included the desired pill pick up rate and dimensions …

Blend It Wine Blending Distribution System, Connor Clarry, Russell Temple, Matt Moren

Mechanical Engineering

No abstract provided.

Micro-Spi Sediment Profile Imaging Micro-Inspector, Andrew P. Corvin, Caleb T. Davies, Matt R. Ferrari

Mechanical Engineering

This project was proposed by Dr. Brian Paavo through a desire to more easily study the benthic sediment layers of the ocean. To do so, he asked us to build a simple and compact machine for use in sediment profile imagery (SPI). Although devices like this already exist, they are all large scale devices that require a ship with a crane to deploy, which is expensive and time consuming. Instead, he desired a “micro” SPI, which is capable of being deployed from a small vessel that can easily navigate shallow waters. Our interpretation of these requirements was as follows: a …

Solid State Drive, Shaun A. Steele

Electrical Engineering

This project documents the design and implementation of a solid state drive (SSD). SSDs are a non-volatile memory storage device that competes with hard disk drives. SSDs rely on flash memory, a type of non-volatile memory that is electrically erased and programmed. The appeal of SSDs lies in the fact that they allow a fast, reliable, and durable memory storage device. The goal of this project is to have a working external SSD built from scratch.

Software Updates To A Multiple Autonomous Quadcopter Search System (Maqss), Jared Speck, Toby Chan

Computer Engineering

A series of performance-based and feature implementation software updates to an existing multiple vehicle autonomous target search system is outlined in this paper. The search system, MAQSS, is designed to address a computational power constraint found on modern autonomous aerial platforms by separating real-time and computationally expensive tasks through delegation to multiple multirotor vehicles. A Ground Control Station (GCS) is also described as part of the MAQSS system to perform the delegation and provide a low workload user interface. Ultimately, the changes to MAQSS noted in this paper helped to improve the performance of the autonomous search mission, the accuracy …

Evergreen: A Senior Project, Ashley Grover

Computer Engineering

No abstract provided.

Teaching The Internet Of Things: Bridging A Path From Cpe329, Steven Han, Rafael Lopez

Computer Engineering

“The ability to connect, communicate with, and remotely manage an incalculable number of networked, automated devices via the Internet is becoming pervasive, from the commercial kitchen to the residential basement room to the arm of the fitness buff.” - WSO2

In this report, we will investigate procedures and technologies used in IoT. A variety of cloud platforms will be described to demonstrate its strengths and usage on IoT applications. Furthermore, demonstrate the most popular hardware being used in several of these applications. This report is aimed to give a good understanding on what it takes to put together an IoT …

Robostock: Autonomous Inventory Tracking, Drew Christian Balthazor

Computer Engineering

No abstract provided.

Android Drone: Remote Quadcopter Control With A Phone, Aubrey John Russell

Computer Engineering

The purpose of the “Android Drone” project was to create a quadcopter that can be controlled by user input sent over the phone’s Wi-Fi connection or 4G internet connection. Furthermore, the purpose was also to be able to receive live video feedback over the internet connection, thus making the drone an inexpensive option compared to other, equivalent drones that might cost thousands of dollars. Not only that, but the Android phone also has a host of other useful features that could be utilized by the drone: this includes GPS, pathing, picture taking, data storage, networking and TCP/IP, a Java software …