Hardware Systems Commons^™

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …

Retinomorphic Mid-Wave Infrared In-Sensor Processing Engine: Device-To-Architecture Co-Design, Hemalatha Nagaraju

Theses

Conventional frame-based CMOS image sensors acquire full-frame pixel data at discrete time intervals, resulting in substantial spatial redundancy and loss of temporal information between frames. The repeated conversion and transfer of redundant pixel data increases bandwidth and power consumption in machine vision systems. Retinomorphic sensing architectures address these limitations by enabling programmable, analog-domain processing directly at the sensor interface. A compact behavioral model of the PbSe device is developed in HSPICE based on calibrated TCAD simulation data to capture gate-controlled photocurrent modulation under varying illumination and gate bias conditions. Error analysis is performed to quantify the deviation between TCAD-generated photocurrent …

A Full System Co-Simulation Platform For Evaluating Edge Machine Learning Inference Using Compute-In-Memory, Belsen Lee

Electrical Engineering and Computer Science (MS) Theses

We present a full-system co-simulation platform for evaluating embedded machine learning (ML) inference using compute-in-memory (CIM). CIM architectures aim to reduce data movement overhead by performing matrix operations in memory, but end-to-end benefits depend on system-level integration costs that are difficult to assess with isolated hardware models alone. To address this gap, we develop an integrated RISC-V QEMU-SystemC co-simulation environment that allows standard embedded Linux to interact with a transaction-level CIM accelerator model via memory-mapped I/O, direct memory access (DMA), and interrupts. To evaluate performance, we benchmark an MNIST image inference workload and a synthetic fully connected neural network, comparing …

Robust Hardware Trojan Detection Leveraging Dual‑Domain Features And Stacked Ensemble Learning, Sefatun-Noor Puspa

All Theses

In Cyber-physical systems rely on sensors, communication, and computing, all powered by integrated circuits (ICs). These ICs are vulnerable to malicious hardware attacks, with hardware Trojans being one of the stealthiest threats. Trojans are malicious implants in the circuitry, which are often inserted during design or fabrication stages. This stealthy addition remains dormant until triggered and might cause functional disruptions or sensitive information leakage once triggered. Traditional IC validation methods, such as functional testing and logic analysis, usually fail to capture these subtle anomalies because hardware Trojans are intentionally designed to mimic normal circuit behavior. They often remain dormant under …

Proxyconnec: A Lora-Based Proactive Safety Communication System For Off-Grid Environments, Shruti Bhandari, Roza Shaimurat

ATU Scholars Symposium

Remote environments lacking cellular or satellite coverage present significant safety challenges. ProxyConnec was developed as a point-to-point communication system using ESP32 microcontrollers and REYAX RYLR998 LoRa modules to provide off-grid monitoring.

The system implements a proactive heartbeat model in which a beacon device transmits a signal every 1,000 milliseconds. A base station monitors this connection using a 5,000 millisecond watchdog timer. If communication is interrupted, the system immediately triggers audible and visual alerts. Unlike conventional tracking devices that depend on manual SOS activation, this design treats unexpected signal loss as a potential safety event.

The manufacturer rates the selected LoRa …

Dashboard And Racing Telemetry, Cole Barach, Jacob Koshel, Ethan Zifzal, Matthew Sullivan

Williams Honors College, Honors Research Projects

The main goal of the project is to design and manufacture a combined dashboard and data logger for the vehicles produced by the Zips Racing design team. The dashboard will intuitively display real-time information to the driver and record all received information while driving. This information may be pulled off the device later for performing data analysis. This project will incorporate custom PCB design, surface mount soldering, embedded software development, and the CAN communication protocol.

Open Source Asic Design Curriculum, Francisco Wilken

Master's Theses

The ever-growing importance of Application-Specific Integrated Circuits (ASICs) in a high-compute world necessitates that college graduates entering the workforce are well prepared to design them. This thesis details the design of novel ASIC curriculum, using open source tools to teach at the undergraduate level. By moving to a higher level of abstraction than classical transistor-focused coursework, chip design material can be made accessible earlier in an undergraduate degree. Additionally, open source tools provide a powerful, free, and portable platform for students to create their own designs, solving assignments focused on industry readiness. Finally, this thesis studies the results and challenges …

Development Of Interactive Games On An Affordable Braille Display, Daniel Tsivkovski, Dylan Ravel, Maryam Etezad

Student Scholar Symposium Abstracts and Posters

Developing an affordable and STEM learning-focused Braille display addresses a significant disparity in the market for Braille displays, where most fail to provide a cost-effective, accessible, and education-oriented solution. This research aims to bridge this gap through innovative hardware and software development, offering a comprehensive learning experience to elementary school children (K-6) who are blind/visually impaired. The hardware features a piezo-electric tactile display that displays up to six Braille characters at once or a shape in an 8x8 pin array configuration. The educational software includes a user-friendly website packed with engaging STEM activities specifically designed for blind/visually impaired children. The …

Breaking New Ground: Division Directly In Memory, M. Hassan Najafi, Mehran Shoushtari Moghadam

Faculty Scholarship

In-memory computing (IMC) has emerged as a promising paradigm for overcoming the limitations of traditional von Neumann architectures by reducing data movement and enhancing computational efficiency. Despite significant advancements in this area, implementing complex arithmetic operations, such as division, directly within memory has remained an elusive challenge. This paper introduces a pioneering technique for performing division operations directly in memory, representing the first successful integration of such functionality into the IMC framework. Our approach leverages an innovative circuit based on an unconventional model of computing–stochastic computing (SC). Our technique extends the computational capabilities of IMC systems and paves the way …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Design Considerations Of A Gpu, Nicholas M. Devilliers

Electrical Engineering and Computer Science Undergraduate Honors Theses

With the current era of AI technology, the era of single instruction multiple data has become an increasingly viable solution to accelerate training. The problem is that while software to use GPUs and other hardware accelerators, designing GPUs and ASIC devices has become increasingly more expensive and there aren’t great examples of generic GPUs that anyone can use and modify. In this thesis, there are four design considerations that will be discussed and how they affect the result of a generic GPU. The four considerations that were talked about in the thesis are, word width, arithmetic type, number of stages, …

Lightlink: Visible Light Communication For Batteryless Devices With Variable Computational Load, Charles Phillips

All Theses

Visible Light Communication (VLC) devices have been experimentally proven to work as a suitable communication medium for batteryless devices. However, the effects of practical load have yet to be fully explored. To that end, we have developed LightLink, a new MAC and PHY layer protocol for VLC within batteryless devices, and have studied various ways that computational load can affect transmission accuracy in realistic scenarios. Our key findings point us towards an adaptive VLC reception system based on inferred environmental variables.

Automatic Cat Caretaker, Connor Mcclenathan, Ryan Anderson, Andrew Tate

Williams Honors College, Honors Research Projects

This project will involve developing and constructing a self-cleaning litter box with feeding and watering functions attached. The machine will have a user interface for setting both the feeding and watering times, as well as how much to fill the food and water bowls at the same time. The project will involve the use of motors for the cleaning, feeding, and watering functions, sensors to detect when to perform those functions, and a microcontroller to process all the data and to tell the motors when to perform their respective functions. This project's goal is to make the task of caring …

Trace Flight Computer, Zachary Stratton, Vandad Mossavand Varkaneh, Nicholas Ely

Williams Honors College, Honors Research Projects

In the world of collegiate rocketry, there are currently no commercial-off-the-shelf flight computers capable of being fitted to liquid engine rockets with thrust vectoring control. Currently, amateur rocketeers utilize unreliable Arduino-based systems or expensive drone computers. The objective of this project is to design a flight computer capable of data collection and filtering, telemetry transmission, and real-time controls of critical safety systems using readily available commercial-off-the-shelf components to allow rocketeers to complete their designs within a reasonable budget. The system will collect data from two IMUs, a barometric altimeter, and a magnetometer, then filter the collected data using custom Kalman …

Fail-Safe Logic Design Strategies Within Modern Fpga Architectures, Priya A. Bhakta

Electrical and Computer Engineering ETDs

Field Programmable Gate Arrays (FPGAs) are vulnerable to radiation-induced single event upsets (SEUs) and fault injection attacks, requiring the use of redundancy techniques such as fail-safe computing. Fail-safe computing refers to computing systems that revert to a non-operational safe state when a fault occurs. This work investigates circuit-level techniques and implements fail-safe computing processes as mitigation for SEUs and fault injection attacks on FPGAs. The analysis reveals vulnerabilities that exist in FPGAs over those in application-specific integrated circuits (ASIC); thus, requiring a more elaborate network of redundant circuits and checking logic. The reconfiguration capability of FPGAs adds complexity to fail-safe …

Building A Wireless Electronic Control Unit For An Electric Vehicle, Hector S. Sosa

2024 Spring Honors Capstone Projects - Archive

Modern vehicles have a variety of features such remote start systems, advance drive assist systems, smart suspension systems, and a feature rich infotainment system. With all this technology in the car, there exists a complex network of computers working together in conjunction to deliver the modern driving experience that many people have today. To be competitive in the market, auto manufacturers are tasked to add additional features to vehicles by adding additional or modifying electronic control units (ECUs). In this study, an ECU will be designed for a mock electric vehicle which contains an already established network of ECU’s. The …

Development Of A Multi-Use Modular Microfluidic Platform Using 3d Printing, Carson Emeigh

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Microfluidic lab-on-a-chip (LoC) technology has driven numerous innovations due to their ability to perform laboratory-scale experiments on a single chip using microchannels. Although LoC technology has been innovative, it still suffers from limitations related to its fabrication and design flexibility. Typical LoC fabrication, with photolithography, is time consuming, expensive, and inflexible. To overcome the limitations of LoC devices, modular microfluidic platforms have been developed where multiple microfluidic modules, each with a specific function or group of functions, can be combined on a single platform. Modular microfluidics have overcome some of the limitations of LoC devices, but currently, their fabrication is …

Towards A Wearable Device For Measuring Impedance Plethysmography Of The Radial Artery, Pritom Chowdhury

Dartmouth College Master’s Theses

Recent advancements in bioimpedance technology have demonstrated significant promise in the application of cardiac health monitoring. This research explores the design and development of a forearm-based wearable bioimpedance device for non-invasive measurement of heart rate and respiratory rate at an accuracy level comparable to medical-grade monitors. It utilizes a tetrapolar electrode configuration to analyze bioimpedance changes in the radial artery due to blood flow.

An ongoing aspect of this work involves the preliminary development of an embedded framework intended to integrate signal generation, acquisition, and processing within the device to achieve compact and efficient system design, anticipated to contribute to …

Exploring Machine Learning Techniques For Embedded Hardware, Neel R. Vora

Computer Science and Engineering Theses - Archive

This thesis delves into the intricate symbiosis between machine learning (ML) methodologies and embedded hardware systems, with a primary focus on augmenting efficiency and real-time processing capabilities across diverse application domains. It confronts the formidable challenge of deploying sophisticated ML algorithms on resource-constrained embedded hardware, aiming not only to optimize performance but also to minimize energy consumption. Innovative strategies are explored to tailor ML models for streamlined execution on embedded platforms, with validation conducted across various real-world application domains. Notable contributions include the development of a deep-learning framework leveraging a variational autoencoder (VAE) for compressing physiological signals from wearables while …

Reinventing Integrated Photonic Devices And Circuits For High Performance Communication And Computing Applications, Venkata Sai Praneeth Karempudi

Theses and Dissertations--Electrical and Computer Engineering

The long-standing technological pillars for computing systems evolution, namely Moore's law and Von Neumann architecture, are breaking down under the pressure of meeting the capacity and energy efficiency demands of computing and communication architectures that are designed to process modern data-centric applications related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In response, both industry and academia have turned to 'more-than-Moore' technologies for realizing hardware architectures for communication and computing. Fortunately, Silicon Photonics (SiPh) has emerged as one highly promising ‘more-than-Moore’ technology. Recent progress has enabled SiPh-based interconnects to outperform traditional electrical interconnects, offering advantages like high bandwidth density, …

A Novel Processor Architecture Implementing The Stacked Error Diffusion Algorithm And Its Zynq-Based Realization, Qishi Hu

Theses and Dissertations--Electrical and Computer Engineering

Digital halftoning reproduces continuous-tone images using patterns of black and white dots, while multitoning extends this concept by incorporating inks with intermediate intensities. These techniques are extensively utilized in the printing industry to accommodate the limited range of inks available in printers. Stacked error diffusion is a high-quality multitoning algorithm that adheres to the blue-noise dithering standard. This thesis research studies the potential parallelism inherent in the algorithm and introduces the design of a novel processor architecture optimized for efficient execution. The architecture is realized on an FPGA development board featuring a Zynq SoC. Additionally, the hardware prototype can also …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Electronic Note-String Detector, Gavin Garcia-Rossi, Tommy Smail

Electrical Engineering

As the virtual space has become a dominant part of everyone’s day-to-day lives, many normal face-to-face interactions and services have not yet been facilitated by adapting technology. One of these prevailing areas is music lessons. Over Zoom meetings, or other virtual platforms, it is tremendously challenging to teach students. These challenges include recognizing student mistakes audibly and visually, and being able to give confident feedback on the incorrect notes played by learning musicians. Without having to delve into improving the complex systems that would be required to improve audio, video, and connection quality of these connections, we have another solution …

Qasm-To-Hls: A Framework For Accelerating Quantum Circuit Emulation On High-Performance Reconfigurable Computers, Anshul Maurya

Theses and Dissertations

High-performance reconfigurable computers (HPRCs) make use of Field-Programmable Gate Arrays (FPGAs) for efficient emulation of quantum algorithms. Generally, algorithm-specific architectures are implemented on the FPGAs and there is very little flexibility. Moreover, mapping a quantum algorithm onto its equivalent FPGA emulation architecture is challenging. In this work, we present an automation framework for converting quantum circuits to their equivalent FPGA emulation architectures. The framework processes quantum circuits represented in Quantum Assembly Language (QASM) and derives high-level descriptions of the hardware emulation architectures for High-Level Synthesis (HLS) on HPRCs. The framework generates the code for a heterogeneous architecture consisting of a …

Custom Led Dashboard Integration For The Cal Poly Racing Team, Josue Hernandez

Computer Engineering

The Custom LED Dashboard Integration was made for the Cal Poly Racing Team, specifically the BAJA division. The dashboard was made as a way to combat the current limitations endured from the past methods used to display critical information of the vehicle to the car. The display was made to combat issues of limited quantity of data being able to be displayed to the driver and its small readability was an issue, the display helped combat that by providing a greater quantity of data being able to be sent and displayed on the display and the information being displayed having …

Sel4 On Risc-V - Developing High Assurance Platforms With Modular Open-Source Architectures, Michael A. Doran Jr

Masters Theses

Virtualization is now becoming an industry standard for modern embedded systems. Modern embedded systems can now support multiple applications on a single hardware platform while meeting power and cost requirements. Virtualization on an embedded system is achieved through the design of the hardware-software interface. Instruction set architecture, ISA, defines the hardware-software interface for an embedded system. At the hardware level the ISA, provides extensions to support virtualization.

In addition to an ISA that supports hypervisor extensions it is equally important to provide a hypervisor completely capable of exploiting the benefits of virtualization for securing modern embedded systems. Currently there does …

Phone Microwave, Khanh Kim Hoang, Emily Zhou

Computer Engineering

This project involves the installation of remote-control capabilities in an antique 1980s microwave, effectively turning the microwave into a “smart” device. While preserving the original functionality of the microwave, a combination of software and hardware components allows for remote microwave operations. The microwave can be remotely operated by calling the built-in number, and more advanced settings and options can be utilized by texting. The microwave is also secured against unauthorized use with the addition of a PIN code that is required to operate the device.

Towards Multipronged On-Chip Memory And Data Protection From Verification To Design And Test, Senwen Kan, Jennifer Dworak

Computer Science and Engineering Theses and Dissertations

Modern System on Chips (SoCs) generally include embedded memories, and these memories may be vulnerable to malicious attacks such as hardware trojan horses (HTHs), test access port exploitation, and malicious software. This dissertation contributes verification as well as design obfuscation solutions aimed at design level detection of memory HTH circuits as well as obfuscation to prevent HTH triggering for embedded memory during functional operation. For malicious attack vectors stemming from test/debug interfaces, this dissertation presents novel solutions that enhance design verification and securitization of an IJTAG based test access interface. Such solutions can enhance SoC protection by preventing memory test …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …