Hardware Systems Commons^™

Analyzing Energy Use In 2d & 3d Imaging Systems And Workflows, Michael J. Bennett

Published Works

This study examines energy consumption in cultural heritage imaging systems and workflows, addressing a gap in sustainability research that has to date focused primarily on data storage infrastructure estimations. Using Home Assistant edge computing and Z-Wave smart plugs, seven distinct imaging systems were monitored over 203 hours, capturing 55,211 images, and rendering 2,448 objects. Results show an average energy requirement of 11.1 Wh per object, with an annual total of 747 kWh for digitization activities. Findings highlight opportunities to reduce energy demand and improve efficiency, such as automating continuous light shutoff and optimizing postprocessing routines that support institutional sustainability goals …

Dataset To Analyzing Energy Use In 2 & 3d Imaging Systems And Workflows, Michael J. Bennett

Published Works

Analyzing Energy Use in 2D & 3D Imaging Systems and Workflows Dataset

CONTENTS: Z-WaveReportingProfiles; SessionInput; DroneFlights; SessionsComputed; Types; ByType; GrossSummaryUnweighted; WeightingSummary; Raw Sampling History Data

Retinomorphic Mid-Wave Infrared In-Sensor Processing Engine: Device-To-Architecture Co-Design, Hemalatha Nagaraju

Theses

Conventional frame-based CMOS image sensors acquire full-frame pixel data at discrete time intervals, resulting in substantial spatial redundancy and loss of temporal information between frames. The repeated conversion and transfer of redundant pixel data increases bandwidth and power consumption in machine vision systems. Retinomorphic sensing architectures address these limitations by enabling programmable, analog-domain processing directly at the sensor interface. A compact behavioral model of the PbSe device is developed in HSPICE based on calibrated TCAD simulation data to capture gate-controlled photocurrent modulation under varying illumination and gate bias conditions. Error analysis is performed to quantify the deviation between TCAD-generated photocurrent …

Developing A Multi-Band Gnss Remote Sensing Station To Measure Precipitable Water Vapor For Flash Flood Nowcasting, Madison Gleydura

Doctoral Dissertations and Master's Theses

Flash flood nowcasting in Central and Southern Appalachia is particularly challenging due to steep terrain, narrow valleys, highly localized rainfall patterns, and limited measurement coverage. Traditional remote sensing methods, such as Doppler radar and microwave radiometry, suffer from reduced resolution at long range and signal blockage by mountains. GNSS-meteorology offers an established alternative for measuring precipitable water vapor and is currently integrated into several numerical weather models. Recent research demonstrates that commercial-grade GNSS receivers can produce tropospheric products comparable to those from geodetic-grade equipment. The gaps in mountain coverage can be addressed by developing a low-cost, self-contained embedded system that …

How’S It Growing? Tools For Observing Snow And Sea Ice In A Changing Arctic Ocean, Ian Alexander Raphael

Dartmouth College Ph.D Dissertations

September Arctic sea ice extent has diminished by roughly 50% in the 45 years since satellite observations began. The Arctic Ocean may experience ice-free summers within the next decade, with implications for habitat, resource extraction, geopolitics, and local and global climate change. To predict how Arctic sea ice will change in the future, we need to understand its behavior in the present. In situ sea ice mass balance measurements (snow accumulation, ice growth, snow and ice surface melt, and bottom melt) are essential for studying the processes driving rapid changes in the ice pack, and for validating remote sensing measurements …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Modality Distillation Using A Sam-Guided Multimodal Teacher For Unimodal Wildfire Segmentation And Temperature Prediction, Michael N. Marinaccio

All Theses

Wildfires are one of the world’s most devastating natural disasters that affect the environment, communities, and more critically, humans that live in and around those communities. Due to the threat of large-scale destruction in landscapes and human inhabited areas, it has become increasingly more important to develop wildfire detection, management, and suppression strategies to mitigate and prevent these negative outcomes. Wildfire research encompasses many different areas. Most notably, the development of communication, navigation, remote sensing, and monitoring systems. In wildfire monitoring, limitations discovered in-ground and satellite observation have shifted the focus toward Unmanned Aerial Vehicle (UAV) based wildfire research, which …

Lightlink: Visible Light Communication For Batteryless Devices With Variable Computational Load, Charles Phillips

All Theses

Visible Light Communication (VLC) devices have been experimentally proven to work as a suitable communication medium for batteryless devices. However, the effects of practical load have yet to be fully explored. To that end, we have developed LightLink, a new MAC and PHY layer protocol for VLC within batteryless devices, and have studied various ways that computational load can affect transmission accuracy in realistic scenarios. Our key findings point us towards an adaptive VLC reception system based on inferred environmental variables.

Leveraging P4 Programmable-Hardware Switches For In-Network Pmu Packet Recovery, Evan Michael Bonar

Electrical Engineering and Computer Science Undergraduate Honors Theses

Phasor Measurement Unit (PMU) systems are essential for real-time power grid monitor- ing but often face data loss due to network delays, equipment malfunctions, or transmis- sion errors. Traditional centralized recovery solutions introduce significant latency and scalability challenges. This thesis presents a P4-based in-network recovery mechanism that embeds detection and recovery directly into the data plane of P4-enabled programmable switches, significantly reducing recovery time and infrastructure complexity. Using the Aurora 610 switch, the system detects missing packets via sequence number analysis and recovers magnitudes with an efficient register-based algorithm.

Evaluation demonstrates high accuracy and low latency, achieving a mean absolute …

Building A Wireless Electronic Control Unit For An Electric Vehicle, Hector S. Sosa

2024 Spring Honors Capstone Projects - Archive

Modern vehicles have a variety of features such remote start systems, advance drive assist systems, smart suspension systems, and a feature rich infotainment system. With all this technology in the car, there exists a complex network of computers working together in conjunction to deliver the modern driving experience that many people have today. To be competitive in the market, auto manufacturers are tasked to add additional features to vehicles by adding additional or modifying electronic control units (ECUs). In this study, an ECU will be designed for a mock electric vehicle which contains an already established network of ECU’s. The …

Summonable Construction Delivery Robot, Kevin M. Lewis

Honors Capstones

In many different construction industries, there is a need for tools, parts, and other necessary items to be transported quickly and efficiently over various types of terrain. Human resources have often been used to address these needs, which can become very time and cost inefficient over long periods. The design proposal here is aimed at addressing this need by developing an autonomous outdoor mobile robot based on a quadrupedal robot design. This approach differs by incorporating a wheeled and quadrupedal hybrid actuation system that provides terrain negotiation and speed at the appropriate times. The team uses Robot Operating System (ROS) …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Electronic Note-String Detector, Gavin Garcia-Rossi, Tommy Smail

Electrical Engineering

As the virtual space has become a dominant part of everyone’s day-to-day lives, many normal face-to-face interactions and services have not yet been facilitated by adapting technology. One of these prevailing areas is music lessons. Over Zoom meetings, or other virtual platforms, it is tremendously challenging to teach students. These challenges include recognizing student mistakes audibly and visually, and being able to give confident feedback on the incorrect notes played by learning musicians. Without having to delve into improving the complex systems that would be required to improve audio, video, and connection quality of these connections, we have another solution …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Watch: A Distributed Clock Time Offset Estimation Tool On The Platform For Open Wireless Data-Driven Experimental Research, Cassie Jeng

McKelvey School of Engineering Graduate Student Theses & Dissertations

The synchronization of the clocks used at different devices across space is of critical importance in wireless communications networks. Each device’s local clock differs slightly, affecting the times at which packets are transmitted from different nodes in the network. This thesis provides experimentation and software development on POWDER, the Platform for Open, Wireless Data-driven Experimental Research, an open wireless testbed across the University of Utah campus. We build upon Shout, a suite of Python scripts that allow devices to iteratively transmit and receive with each other and save the collected data. We introduce WATCH, an experimental method to estimate clock …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Wifi Sensing At The Edge Towards Scalable On-Device Wireless Sensing Systems, Steven M. Hernandez

Theses and Dissertations

WiFi sensing offers a powerful method for tracking physical activities using the radio-frequency signals already found throughout our homes and offices. This novel sensing modality offers continuous and non-intrusive activity tracking since sensing can be performed (i) without requiring wearable sensors, (ii) outside the line-of-sight, and even (iii) through the wall. Furthermore, WiFi has become a ubiquitous technology in our computers, our smartphones, and even in low-cost Internet of Things devices. In this work, we consider how the ubiquity of these low-cost WiFi devices offer an unparalleled opportunity for improving the scalability of wireless sensing systems. Thus far, WiFi sensing …

A Memory-Centric Customizable Domain-Specific Fpga Overlay For Accelerating Machine Learning Applications, Atiyehsadat Panahi

Graduate Theses and Dissertations

Low latency inferencing is of paramount importance to a wide range of real time and userfacing Machine Learning (ML) applications. Field Programmable Gate Arrays (FPGAs) offer unique advantages in delivering low latency as well as energy efficient accelertors for low latency inferencing. Unfortunately, creating machine learning accelerators in FPGAs is not easy, requiring the use of vendor specific CAD tools and low level digital and hardware microarchitecture design knowledge that the majority of ML researchers do not possess. The continued refinement of High Level Synthesis (HLS) tools can reduce but not eliminate the need for hardware-specific design knowledge. The designs …

Barrier Knockdown Test Control System For The Cal Poly Kinesiology Department, Regina M. Chapuis

Computer Engineering

The goal of this project is to design and implement a new control system for the LEDs and buttons on an existing Barrier Knockdown setup in the Cal Poly Kinesiology department. The Barrier Knockdown test is a testing apparatus in which subjects knock down a series of mechanical barriers in one of three patterns. The computer system times their reaction and movement time, and the test as a whole provides students with data to study the phenomenon of Contextual Interference. This system was previously controlled by an old computer setup that ultimately crashed. This project recreates the logic and user …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Structural Checking Tool Restructure And Matching Improvements, Derek Taylor

Graduate Theses and Dissertations

With the rising complexity and size of hardware designs, saving development time and cost by employing third-party intellectual property (IP) into various first-party designs has become a necessity. However, using third-party IPs introduces the risk of adding malicious behavior to the design, including hardware Trojans. Different from software Trojan detection, the detection of hardware Trojans in an efficient and cost-effective manner is an ongoing area of study and has significant complexities depending on the development stage where Trojan detection is leveraged. Therefore, this thesis research proposes improvements to various components of the soft IP analysis methodology utilized by the Structural …

Cognality Vr: Exploring A Mobile Vr App With Multiple Stakeholders To Reduce Meltdowns In Autistic Children, Louanne E. Boyd, Espen Garner, Ian Kim, Gianna Valencia

Engineering Faculty Articles and Research

Many autistic children can have difficulty communicating, understanding others, and interacting with new and unfamiliar environments. At times they may suffer from a meltdown. The major contributing factor to meltdowns is sensory overwhelm. Technological solutions have shown promise in improving the quality of life for autistic children-however little exists to manage meltdowns. In this work with stakeholders, we design and deploy a low cost, mobile VR application to provide relief during sensory discomfort. Through the analysis of surveys from 88 stakeholders from a variety of groups (i.e., autistic adults, children with autism, parents of autistic individuals, and medical practitioners), we …

A Low-Cost, Arduino-Based Platform For Emulating Energy Harvesting In Wireless Sensor Networks, Braden A. Miller

ONU Student Research Colloquium

This paper presents an Arduino-based platform for emulating energy harvesting in Wireless Sensor Networks (WSNs) as a form of hardware-in-the-loop simulation. The platform makes use of a battery monitoring circuit and code implemented on the Arduino as an alternative to using significantly more expensive fully equipped energy harvesting nodes. Using embedded code to emulate the energy harvesting process allows for various energy harvesting models and processes to be tested using the same platform. The main contributions of this paper are the experimental data and analyses demonstrating the energy use characterization of the Arduino-based platform in a three-node relay network using …

Adapting Deep Learning For Underwater Acoustic Communication Channel Modeling, Li Wei

Dissertations, Master's Theses and Master's Reports

The recent emerging applications of novel underwater systems lead to increasing demand for underwater acoustic (UWA) communication and networking techniques. However, due to the challenging UWA channel characteristics, conventional wireless techniques are rarely applicable to UWA communication and networking. The cognitive and software-defined communication and networking are considered promising architecture of a novel UWA system design. As an essential component of a cognitive communication system, the modeling and prediction of the UWA channel impulse response (CIR) with deep generative models are studied in this work.

Firstly, an underwater acoustic communication and networking testbed is developed for conducting various simulations and …

Design Project: Smart Headband, John Michel, Jack Durkin, Noah Lewis

Williams Honors College, Honors Research Projects

Concussion in sports is a prevalent medical issue. It can be difficult for medical professionals to diagnose concussions. With the fast pace nature of many sports, and the damaging effects of concussions, it is important that any concussion risks are assessed immediately. There is a growing trend of wearable technology that collects data such as steps and provides the wearer with in-depth information regarding their performance. The Smart Headband project created a wearable that can record impact data and provide the wearer with a detailed analysis on their risk of sustaining a concussion. The Smart Headband uses accelerometers and gyroscopes …

A General Framework For Characterizing And Evaluating Attacker Models For Cps Security Assessment, Christopher S. Deloglos, Christopher Deloglos

Theses and Dissertations

Characterizing the attacker’s perspective is essential to assessing the security posture and resilience of cyber-physical systems. The attacker’s perspective is most often achieved by cyber-security experts (e.g., red teams) who critically challenge and analyze the system from an adversarial stance. Unfortunately, the knowledge and experience of cyber-security experts can be inconsistent leading to situations where there are gaps in the security assessment of a given system. Structured security review processes (such as TAM, Mission Aware, STPA-SEC, and STPA-SafeSec) attempt to standardize the review processes to impart consistency across an organization or application domain. However, with most security review processes, the …

Integration Of Robotic And Electro-Pneumatic Systems Using Advanced Control And Communication Schemes, Chinmay Kondekar

Dissertations, Master's Theses and Master's Reports

Modern industrial automation systems are designed by interconnecting various subsystems which work together to perform a process. The thesis project aims to integrate fragmented subsystems into a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems.

The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication and hardwired connections. The interconnected system works together to perform machining of a workpiece using advanced control methods of CAD to robot path generation, central control through a PLC, and process control through HMI.

Standardized programming blocks …

Polyone Smartphone, Joshua Zalmanowitz, Chi Nguyen, Gerome Cacho, Chris Lim

Electrical Engineering

The Poly One Smartphone is a student designed smartphone built to explore the implementation of 5G, provide a hardware solution to ensure personal information security and privacy, and provide longer battery life. The key features of this smartphone include but are not limited to a main cpu, some form of network connectivity in the form of Wi-fi or Cellular Data, calling functionality, a rechargeable battery that works with common power connection protocols, and compatibility with popular applications.

Side-Channel Power Resistance For Encryption Algorithms Using Implementation Diversity, Ivan M. Bow

Electrical and Computer Engineering ETDs

This thesis paper investigates countermeasures to hardware side-channel attacks and proposes a new solution to this ever growing threat against data integrity and security. The side-channel attack methods, differential power analysis and correlation power analysis, are both very powerful techniques and are used to gain access to secrets inside of a field programmable gate array that are otherwise inaccessible, in particular the cryptographic key for the Advanced Encryption Standard algorithm. To counter these attacks, we propose a method of changing the internal hardware configuration of the field programmable gate array using dynamic partial reconfiguration. Using this method, we change the …

Nonlinear Least Squares 3-D Geolocation Solutions Using Time Differences Of Arrival, Michael V. Bredemann

Mathematics & Statistics ETDs

This thesis uses a geometric approach to derive and solve nonlinear least squares minimization problems to geolocate a signal source in three dimensions using time differences of arrival at multiple sensor locations. There is no restriction on the maximum number of sensors used. Residual errors reach the numerical limits of machine precision. Symmetric sensor orientations are found that prevent closed form solutions of source locations lying within the null space. Maximum uncertainties in relative sensor positions and time difference of arrivals, required to locate a source within a maximum specified error, are found from these results. Examples illustrate potential requirements …