Hardware Systems Commons^™

Digital, Automated Reactive Target System, Nicholas Haas, Saipranay Vellala, Trandon Ware, Thomas Martin

Williams Honors College, Honors Research Projects

In this era, technology is woven into almost every facet of our leisure activities. Although technology has innovated hobbies ranging from chess to soccer, the art of shooting has been neglected. Unnecessary insufficiency such as bullet ricochets off of mechanical steel targets, ineffective progress tracking, and general inaccessibility to outdoor training facilities are all improvable areas of this sport. The Dynamic Automated Reactive Target (D.A.R.T) System aims to fill some of these gaps and help modernize recreational marksmanship. Modeling the system after a dueling tree will optimize the use of the system and allow for different training models to challenge …

Involuntary Signal-Based Grounding Of Civilian Unmanned Aerial Systems (Uas) In Civilian Airspace, Keith Conley

Master's Theses

This thesis investigates the involuntary signal-based grounding of civilian unmanned aerial systems (UAS) in unauthorized air spaces. The technique proposed here will forcibly land unauthorized UAS in a given area in such a way that the UAS will not be harmed, and the pilot cannot stop the landing. The technique will not involuntarily ground authorized drones which will be determined prior to the landing. Unauthorized airspaces include military bases, university campuses, areas affected by a natural disaster, and stadiums for public events. This thesis proposes an early prototype of a hardware-based signal based involuntary grounding technique to handle the problem …

Weight Controlled Electric Skateboard, Zachary Barram, Carson Bertozzi, Vishnu Dodballapur

Computer Engineering

Technology and the way that humans interact is becoming more vital and omnipresent with every passing day. However, human interface device designers suffer from the increasingly popular “designed for me or people like me” syndrome. This design philosophy inherently limits accessibility and usability of technology to those like the designer. This places severe limits of usability to those who are not fully able as well as leaves non-traditional human interface devices unexplored. This project set out to explore a previously uncharted human interface device, on an electric skateboard, and compare it send user experience with industry leading human interface devices.

Design Of Remote Datalogger Connection And Live Data Tweeting System, Zachary Wofford

Biological and Agricultural Engineering Undergraduate Honors Theses

Low-Impact Development (LID) is an attempt to sustainably respond to the potential hazards posed by urban expansion. Green roofs are an example of LID design meant to reduce the amount of runoff from storm events that are becoming more intense and less predictable while also providing insulation to buildings. LID has not yet been widely adopted as it is often a more expensive alternative to conventional infrastructure (Bowman et. al., 2009). However, its benefits are apparent. The University of Arkansas Honors College awarded a grant to research the large green roof atop Hillside Auditorium. One part of this grant is …

A Study Of Scalability And Cost-Effectiveness Of Large-Scale Scientific Applications Over Heterogeneous Computing Environment, Arghya K. Das

LSU Doctoral Dissertations

Recent advances in large-scale experimental facilities ushered in an era of data-driven science. These large-scale data increase the opportunity to answer many fundamental questions in basic science. However, these data pose new challenges to the scientific community in terms of their optimal processing and transfer. Consequently, scientists are in dire need of robust high performance computing (HPC) solutions that can scale with terabytes of data.

In this thesis, I address the challenges in three major aspects of scientific big data processing as follows: 1) Developing scalable software and algorithms for data- and compute-intensive scientific applications. 2) Proposing new cluster architectures …

The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette

Master's Theses

As wireless protocols become easier to implement, more products come with wireless connectivity. This latest push for wireless connectivity has left a gap in the development of the security and the reliability of some protocols. These wireless protocols can be used in the growing field of IoT where wireless sensors are used to share information throughout a network. IoT is being implemented in homes, agriculture, manufactory, and in the medical field. Disrupting a wireless device from proper communication could potentially result in production loss, security issues, and bodily harm. The 802.15.4/ZigBee protocol is used in low power, low data rate, …

Design Of A Machine Vision Camera For Spatial Augmented Reality, Matt Phillip Ruffner

Theses and Dissertations--Electrical and Computer Engineering

Structured Light Imaging (SLI) is a means of digital reconstruction, or Three-Dimensional (3D) scanning, and has uses that span many disciplines. A projector, camera and Personal Computer (PC) are required to perform such 3D scans. Slight variances in synchronization between these three devices can cause malfunctions in the process due to the limitations of PC graphics processors as real-time systems. Previous work used a Field Programmable Gate Array (FPGA) to both drive the projector and trigger the camera, eliminating these timing issues, but still needing an external camera. This thesis proposes the incorporation of the camera with the FPGA SLI …

University Of Maine High Altitude Ballooning Eclipse Experience, Kent Seneres, Derek Haas, William Bessette, Richard Eason

2017 Academic High Altitude Conference

The University of Maine High Altitude Ballooning (UMHAB) team launched two balloons during the August 21, 2017 total solar eclipse, producing a consistent online video stream of the eclipse to an altitude of 110,000 feet. This paper discusses the key factors that lead to a successful launch and recovery, such as thorough testing procedures, redesign of components, choice of launch site, and a touch of luck. In preparation for the event, the team tested the equipment and code over eleven balloon launches. Airplane based testing and land testing were conducted for the tracking and video stream components. The payloads and …

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

System For Workout Information Management, Mark Archual, Ethan E. Schweinsberg

Williams Honors College, Honors Research Projects

Power racks are a weight machine used by swimmers to provide resistance while they swim away from a wall toward the center of the pool. The objective of this project is to build a modular data system that can be added to these machines to record and log quantitative information during their use. This information will be stored on a web server, and made available to the user for analysis and visualization through a web application. Workout data can also be downloaded and interpreted at a later time, independent of the web application. The data system should be water resistant, …

Pinpoint: Location Beacon And Tracking, Ezequiel Lopez Iii

Computer Engineering

The purpose of Pinpoint was to create a device that can collect and transmit location information for multiple users on a wireless network. The device would be used to keep track of and communicate with other users nearby. The final design includes a touchscreen display as a graphical user interface (GUI), an XBee RF module for wireless networking, a GPS receiver for location tracking, and a Programmable System on a Chip (PSoC) to control the modules.

Human Factors In The Development Of The Mobile Extreme Environment Research Station (Meers) Mission Control System (Mcs), Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the MEERS MCS were required to develop a novel interface for their product. During the development of the MCS, analytical human factors methods and display principles were implemented to create the user interface. The methods and principles were also used so the MCS had a user centered design. The MCS went through several iterations of design. This presentation discusses the development process of the MEERS MCS from a human factors standpoint.

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen

Master's Theses

Synthetic Aperture Radar (SAR) has come into widespread use in several civilian and military applications. The focus of this paper is the military application of imaging point targets captured by an airborne SAR platform. Using the traditional SAR method of determining target motion by analyzing the difference between subsequent images takes a relatively large amount of processing resources. Using methods in this thesis, target motion can be estimated before even a single image is obtained, reducing the amount of time and power used by a significantly large amount. This thesis builds on work done by Brain Zaharri and David So. …

Disc Golf Locator, Christian Wallenfelsz, Shane Gamble, Noah Sanor, Brandon Linhart

Electrical and Computer Engineering Faculty Research

Disc golf is a game similar to traditional golf where players throw small plastic discs into chain-link nets. Disc golf courses cover several acres containing lakes, small wooded areas, large bushes, and grassy fields. It is not uncommon to accidentally throw a golf disc into the woods or bushes, so it is the goal of this project to create a device to locate the disc and make suggestions for the player to improve performance. A small device will be attached the disc which will track its location and flight characteristics. The device will contain a GPS receiver, an inertial measurement …

Comparing The Efficiency Of Heterogeneous And Homogeneous Data Center Workloads, Brandon Kimmons

College of Graduate Studies: Theses & Dissertations

Abstract

Information Technology, as an industry, is growing very quickly to keep pace with increased data storage and computing needs. Data growth, if not planned or managed correctly, can have larger efficiency implications on your data center as a whole. The long term reduction in efficiency will increase costs over time and increase operational overhead. Similarly, increases in processor efficiency have led to increased system density in data centers. This can increase cost and operational overhead in your data center infrastructure.

This paper proposes the idea that balanced data center workloads are more efficient in comparison to similar levels of …

Ultra-Fast, Autonomous, Reconfigurable Communication System, Paul Bupe Jr

College of Graduate Studies: Theses & Dissertations

The recent years have witnessed an increase in natural disasters in which the destruction of essential communication infrastructure has significantly affected the number of casualties. In 2005, Hurricane Katrina in the United States resulted in over 1,900 deaths, three million land-line phones disconnections, and more than 2000 cell sites going out of service. This incident highlighted an urgent need for a quick-deployment, efficient communication network for emergency relief purposes. In this research, a fully autonomous system to deploy Unmanned Aerial Vehicles (UAVs) as the first phase disaster recovery communication network for wide-area relief is presented. As part of this system, …

Optimizing Performance And Scalability On Hybrid Mpsocs, Hongyuan Ding

Graduate Theses and Dissertations

Hardware accelerators are capable of achieving significant performance improvement. But design- ing hardware accelerators lacks the flexibility and the productivity. Combining hardware accelerators with multiprocessor system-on-chip (MPSoC) is an alternative way to balance the flexibility, the productivity, and the performance. However, without appropriate programming model it is still a challenge to achieve parallelism on a hybrid (MPSoC) with with both general-purpose processors and dedicated accelerators. Besides, increasing computation demands with limited power budget require more energy-efficient design without performance degradation in embedded systems and mobile computing platforms. Reconfigurable computing with emerging storage technologies is an alternative to enable the optimization …

Design Of An Energy Efficient Virtual End Node Client Using Openadr2.0a And Smap, Kevin Navero

BioResource and Agricultural Engineering

Demand Response (DR) describes the set of actions taken to impose a reduction in electrical loads to stabilize the power grid and decrease costs. It is used when power grid emergencies or extremely high demand and congestion, threaten the electricity supply-demand balance. Automated Demand Response (ADR) describes a web-based control system that triggers DR events automatically by signaling other pre-programmed control systems. This project intends to use the OpenADR2.0 specifications provided by the OpenADR Alliance to construct an open source Virtual End Node (VEN) client to retrieve DR signals. The Simple Measurement and Actuation Profile (sMAP) software is also used …

Buddy: A Breathalyzer For Iphone, Douglas Blaalid, Brandon Bevans

Electrical Engineering

Buddy is a Breathalyzer for the iPhone designed to be more a product than a project. Through proprietary hardware and a custom iOS application, Buddy provides users with a previously untapped link from the alcohol in their body to the display on their phones. Buddy uses an alcohol sensor connected to an Arduino Uno to accurately detect the BAC of the user’s breath. The BAC is then transmitted to an iPhone via the headphone jack where it is displayed and logged in a captivating app. The finished prototype successfully measured the approximate BAC of intoxicated users. The product website has …

Lyfi, Kianoosh Salami, Justin Cotton, Elush Shirazpour

Electrical Engineering

This paper will cover the steps necessary to design, build, and manage networkable smart light switches over WiFi via a mobile application. It contains a microcontroller running a real time operating system, a WiFi module, a Java server with SQLite databasing, and a mobile phone application.

LyFi is designed to turn on/off and dim household lights while only requiring the same installation procedure as a less capable dimmer switch. Once installed and connected to a network, LyFi will self-discover and configure. The server automatically propogates a database of nodes where any mobile device running an application can receive an updated …

Discrete Alarm Clock, Travis Moore, Collin Barth

Electrical Engineering

The standard alarm clock, as used daily by millions worldwide, has clear room for modification and improvement.  This paper documents an implementation that rectifies many of these flaws.  Improvements include adjustable snooze length, an IR remote for ease of use, and an RF headset for discrete alarm use or potential incorporation into a device much like a hearing aid.  The processes involved in creating a digital alarm clock, as well as the obstacles met in the implementation of the enhanced design, are detailed within.

Data Routing In Multicore Processors Using Dimension Increment Method, Arpita H. Kadakia

UNLV Theses, Dissertations, Professional Papers, and Capstones

A Deadlock-free routing algorithm can be generated for arbitrary interconnection network using the concept of virtual channels but the virtual channels will lead to more complex algorithms and more demands of NOC resource.

In this thesis, we study a Torus topology for NOC application, design its structure and propose a routing algorithm exploiting the characteristics of NOC. We have chosen a typical 16 (4 by 4) routers Torus and propose the corresponding route algorithm. In our algorithm, all the channels are assigned 4 different dimensions (n0,n1,n2 & n3). By following the dimension increment method, we break the dependent route circles, …

Fault-Injection Experiment For The Statistical Characterization Of Faults In Avionics Communication System, Amy M. Yates

Electrical & Computer Engineering Theses & Dissertations

Since flight control systems perform safety-critical functions, it is important to understand the possible effects on the closed-loop dynamical system's performance caused by these faults. The purpose of this project is to design the software and hardware needed to add fault-injection and monitoring capabilities to ROBUS-2, a flight communication system. ROBUS-2 is the current version of the fault-tolerant computer communication system used by the Scalable Processor-Independent Design for Enhanced Reliability (SPIDER), a general-purpose fault-tolerant integrated modular architecture (IMA) developed at the NASA Langley Research Center. The major components of SPIDER include processing elements (PEs) to perform calculations, bus interface units …

Speech Feature Computation For Visual Speech Articulation Training, Stefan Auberg

Electrical & Computer Engineering Theses & Dissertations

A new version of the Visual Speech Articulation Training Aid was implemented which provides real-time visual feedback for speech articulation training. This version was migrated to a Windows Multimedia PC from a previous version which used a Personal Computer (PC) system and additional specialized and expensive custom hardware. This new version will make the system more available to schools and private users. A new method was developed for computing spectral/temporal features which characterize the speech sounds. In addition to the typical frame-based spectral analysis parameters, the new method represents temporal changes of the spectrum with a small number of features. …

An Inventory Of Maine's Telecommunications System, Maine State Planning Office

Maine Collection

An Inventory of Maine's Telecommunications System

Prepared for the Maine State Planning Office by Joseph M. Chaisson and Valerie Lamont of the Telecommunications Research Program at Westbrook College in Portland, Maine. July, 1985.

"The Primary purpose of this report is to provide information for Governor Brennan's Task Force on Telecommunications. The inventory also can be widely used as a reference by persons and organizations concerned with providing telecommunications services in Maine."

Contents: Introduction / Local Telephone Service / Mobile Telephone Service / Digital Termination Service / Cable Television / Paging Systems / Intra-State (Intra-LATA) Public Services / Intra-State (Intra-LATA) Private …