Hardware Systems Commons^™

Hardware-In-The-Loop Evaluation Of Sensor-Source Selection For Prosthetic Locomotion Intent Recognition, Victoria Asencio-Clemens

Master's Theses

Active lower-limb prostheses use intent-recognition systems to identify a user’s locomotion mode and select an appropriate control strategy, but sensor configurations that perform well offline may be unsuitable for resource-constrained embedded hardware. Existing sensor-selection methods generally prioritize classification accuracy without directly accounting for processing latency, memory usage, or other hardware-dependent requirements. To address this limitation, this thesis develops a hardware-in-the-loop source-selection framework for embedded classification of level walking, ramp ascent, ramp descent, stair ascent, and stair descent using multimodal biomechanical data from transtibial amputee participants. Subject-specific linear support vector machine classifiers were evaluated using trial-held-out validation, and candidate configurations from …

Analyzing Energy Use In 2d & 3d Imaging Systems And Workflows, Michael J. Bennett

Published Works

This study examines energy consumption in cultural heritage imaging systems and workflows, addressing a gap in sustainability research that has to date focused primarily on data storage infrastructure estimations. Using Home Assistant edge computing and Z-Wave smart plugs, seven distinct imaging systems were monitored over 203 hours, capturing 55,211 images, and rendering 2,448 objects. Results show an average energy requirement of 11.1 Wh per object, with an annual total of 747 kWh for digitization activities. Findings highlight opportunities to reduce energy demand and improve efficiency, such as automating continuous light shutoff and optimizing postprocessing routines that support institutional sustainability goals …

Dataset To Analyzing Energy Use In 2 & 3d Imaging Systems And Workflows, Michael J. Bennett

Published Works

Analyzing Energy Use in 2D & 3D Imaging Systems and Workflows Dataset

CONTENTS: Z-WaveReportingProfiles; SessionInput; DroneFlights; SessionsComputed; Types; ByType; GrossSummaryUnweighted; WeightingSummary; Raw Sampling History Data

System Integration And Validation Of The Cal Poly Spacecraft Attitude Dynamics Simulator Mk. Iv, Bricen S. Rigby

Master's Theses

The Cal Poly Spacecraft Attitude Dynamics Simulator (SADS) is an ongoing project that seeks to enable the simulation and validation of sensors, actuators, and control logic related to spacecraft attitude control. The SADS platform rests atop a spher- ical air-bearing device which allows for nearly frictionless rotation in all three axes. The orientation of the platform is controlled by four reaction wheels arranged in a pyramidal configuration. Over the past few years, there have been significant updates to the reaction wheel subsystem, as well as requests for a more capable central com- puter. Therefore, a new system architecture for the …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …

Lora Networking Hardware Reference Designs For Terrestrial And Low-Earth-Orbit Communications, Kevin Nottberg

Master's Theses

The work presented here demonstrates a highly robust and tested LoRa networking hardware reference design to meet the needs of the embedded networking company OWL Integrations. The hardware presented integrated a unique combination of features and design choices. The detailing of its unique design is potentially of use to others for use in fielded battery powered terrestrial sensor networking hardware utilizing LoRa. Also, the terrestrial hardware presented is shown to have the capability to support command and control (C2) LoRa links in low-earth orbit beyond terrestrial systems. The design presented has a more U.S. centric component bill-of-materials (BOM), with the …

Design And Parametric Study Of A Mems-Based Reservoir Computer For Reinforcement Learning, Andrew P. Carr

Master's Theses

Single-node reservoir computing (RC) is a hardware-efficient approach to machine learning, leveraging the dynamics of physical systems. In this work, two reinforcement learning algorithms, Q-learning and Proximal Policy Optimization (PPO), are applied to a simulated micro-electro-mechanical system (MEMS)-based reservoir computer to solve both discrete and continuous control tasks. MEMS-based reservoirs are low-power, compact, and their natural frequencies (kHz to MHz) pair well with real-time control loops. To explore the relationship between reservoir dynamics and learning performance, a parametric study is conducted on two reservoir hyperparameters, reservoir size and neuron separation, using CartPole-v1 and MountainCar-v0. The RC successfully learns multiple tasks …

Retinomorphic Mid-Wave Infrared In-Sensor Processing Engine: Device-To-Architecture Co-Design, Hemalatha Nagaraju

Theses

Conventional frame-based CMOS image sensors acquire full-frame pixel data at discrete time intervals, resulting in substantial spatial redundancy and loss of temporal information between frames. The repeated conversion and transfer of redundant pixel data increases bandwidth and power consumption in machine vision systems. Retinomorphic sensing architectures address these limitations by enabling programmable, analog-domain processing directly at the sensor interface. A compact behavioral model of the PbSe device is developed in HSPICE based on calibrated TCAD simulation data to capture gate-controlled photocurrent modulation under varying illumination and gate bias conditions. Error analysis is performed to quantify the deviation between TCAD-generated photocurrent …

A Full System Co-Simulation Platform For Evaluating Edge Machine Learning Inference Using Compute-In-Memory, Belsen Lee

Electrical Engineering and Computer Science (MS) Theses

We present a full-system co-simulation platform for evaluating embedded machine learning (ML) inference using compute-in-memory (CIM). CIM architectures aim to reduce data movement overhead by performing matrix operations in memory, but end-to-end benefits depend on system-level integration costs that are difficult to assess with isolated hardware models alone. To address this gap, we develop an integrated RISC-V QEMU-SystemC co-simulation environment that allows standard embedded Linux to interact with a transaction-level CIM accelerator model via memory-mapped I/O, direct memory access (DMA), and interrupts. To evaluate performance, we benchmark an MNIST image inference workload and a synthetic fully connected neural network, comparing …

Robust Hardware Trojan Detection Leveraging Dual‑Domain Features And Stacked Ensemble Learning, Sefatun-Noor Puspa

All Theses

In Cyber-physical systems rely on sensors, communication, and computing, all powered by integrated circuits (ICs). These ICs are vulnerable to malicious hardware attacks, with hardware Trojans being one of the stealthiest threats. Trojans are malicious implants in the circuitry, which are often inserted during design or fabrication stages. This stealthy addition remains dormant until triggered and might cause functional disruptions or sensitive information leakage once triggered. Traditional IC validation methods, such as functional testing and logic analysis, usually fail to capture these subtle anomalies because hardware Trojans are intentionally designed to mimic normal circuit behavior. They often remain dormant under …

Proxyconnec: A Lora-Based Proactive Safety Communication System For Off-Grid Environments, Shruti Bhandari, Roza Shaimurat

ATU Scholars Symposium

Remote environments lacking cellular or satellite coverage present significant safety challenges. ProxyConnec was developed as a point-to-point communication system using ESP32 microcontrollers and REYAX RYLR998 LoRa modules to provide off-grid monitoring.

The system implements a proactive heartbeat model in which a beacon device transmits a signal every 1,000 milliseconds. A base station monitors this connection using a 5,000 millisecond watchdog timer. If communication is interrupted, the system immediately triggers audible and visual alerts. Unlike conventional tracking devices that depend on manual SOS activation, this design treats unexpected signal loss as a potential safety event.

The manufacturer rates the selected LoRa …

Developing A Multi-Band Gnss Remote Sensing Station To Measure Precipitable Water Vapor For Flash Flood Nowcasting, Madison Gleydura

Doctoral Dissertations and Master's Theses

Flash flood nowcasting in Central and Southern Appalachia is particularly challenging due to steep terrain, narrow valleys, highly localized rainfall patterns, and limited measurement coverage. Traditional remote sensing methods, such as Doppler radar and microwave radiometry, suffer from reduced resolution at long range and signal blockage by mountains. GNSS-meteorology offers an established alternative for measuring precipitable water vapor and is currently integrated into several numerical weather models. Recent research demonstrates that commercial-grade GNSS receivers can produce tropospheric products comparable to those from geodetic-grade equipment. The gaps in mountain coverage can be addressed by developing a low-cost, self-contained embedded system that …

Dashboard And Racing Telemetry, Cole Barach, Jacob Koshel, Ethan Zifzal, Matthew Sullivan

Williams Honors College, Honors Research Projects

The main goal of the project is to design and manufacture a combined dashboard and data logger for the vehicles produced by the Zips Racing design team. The dashboard will intuitively display real-time information to the driver and record all received information while driving. This information may be pulled off the device later for performing data analysis. This project will incorporate custom PCB design, surface mount soldering, embedded software development, and the CAN communication protocol.

Automated Pill Dispenser, Ryan Oderkirk, Connor Beaven, Rachelle Labrie, Josue Panchana

Williams Honors College, Honors Research Projects

The project we propose is an automated system for dispensing dosages of medication throughout the day. It will be able to alert a user when their pills need to be taken and give them the correct dosages of up to four different medications. These dosages are configurable as well as the scheduled time they are to be taken. In addition, the pill dispenser will alert users when they are low on medications and need to refill the machine.

Nanomagnet Based Reservoir Computing And Quantum Control, Fahim F. Chowdhury

Theses and Dissertations

Conventional CMOS scaling has driven remarkable advances in computing but faces increasing physical and energy constraints, motivating alternative computing paradigms that integrate memory and computation while improving energy efficiency. Nanoscale magnetic systems offer a promising platform for such approaches because their intrinsic nonlinear dynamics and localized magnetic fields can support both classical and quantum information processing. This thesis investigates nanomagnetic systems for physical reservoir computing and, with primary emphasis, for localized quantum control of spin qubits.

The first part explores dipole-coupled nanomagnet arrays as physical reservoirs. Micromagnetic simulations demonstrate nonlinear dynamical behavior with high short-term memory and parity-check capacity, enabling …

Rapid Prototyping Of Low-Cost Sensor Systems Towards A Platform For Upper Limb Posture Estimation, Russell Rathbun

Electrical Engineering and Computer Science Undergraduate Honors Theses

Physical therapy requires patients to perform repeated actions to achieve meaningful results in rehabilitation. This thesis explores production methods and various sensor systems by utilizing rapid prototyping, inertial measurement units (IMUs), and capacitive sensor arrays (CSAs). CSAs can be made from a wide ar- ray of materials and techniques including 3d printing and laser ablation–to rapidly create CSAs that can be custom fit to enable proximity, force, and touch detection. IMU and CSA systems individually are able to track upper limb movements, ges- tures, and positions. This combination of sensors enables accurate upper limb pos- ture estimation of patients. This …

Accelerating Gnn Inference On Multi-Core Systems, Binglin Ji

McKelvey School of Engineering Graduate Student Theses & Dissertations

Graph Neural Networks (GNNs) are becoming increasingly popular, with their applications expanding across diverse domains. As the scale of graph data continues to grow, including larger numbers of nodes, edges, and higher embedding dimensions, standardized libraries such as DGL and PyG have been developed to facilitate GNN computation. However, with the rapid increase in the number of processor cores and the evolution of multi-core architectures, these libraries often show poor scalability and fail to execute GNN inference efficiently on the latest multi-core systems, particularly those with upwards of a hundred cores. To address this limitation, we present FGI, a Fast …

Low-Level Memory Attacks On Edge Assisted Robotic Applications, William Arnold

Master of Engineering Theses

This thesis investigates how low-level memory faults can undermine edge-assisted robotic systems that rely on memory optimization. As robots are utilized in real world applications, the ability to operate safely and successfully in mission critical deployment becomes important. To help achieve these goals, developers are increasingly starting to place computation nodes at network edges to meet latency and reliability requirements. Edge nodes, however, are resource-constrained and resources conservation techniques such as Kernel Same-page Merging (KSM) are enabled to deduplicate identical pages across processes or virtual machines. This thesis shows that this optimization technique quietly widens the attack surface and can …

How’S It Growing? Tools For Observing Snow And Sea Ice In A Changing Arctic Ocean, Ian Alexander Raphael

Dartmouth College Ph.D Dissertations

September Arctic sea ice extent has diminished by roughly 50% in the 45 years since satellite observations began. The Arctic Ocean may experience ice-free summers within the next decade, with implications for habitat, resource extraction, geopolitics, and local and global climate change. To predict how Arctic sea ice will change in the future, we need to understand its behavior in the present. In situ sea ice mass balance measurements (snow accumulation, ice growth, snow and ice surface melt, and bottom melt) are essential for studying the processes driving rapid changes in the ice pack, and for validating remote sensing measurements …

Open Source Asic Design Curriculum, Francisco Wilken

Master's Theses

The ever-growing importance of Application-Specific Integrated Circuits (ASICs) in a high-compute world necessitates that college graduates entering the workforce are well prepared to design them. This thesis details the design of novel ASIC curriculum, using open source tools to teach at the undergraduate level. By moving to a higher level of abstraction than classical transistor-focused coursework, chip design material can be made accessible earlier in an undergraduate degree. Additionally, open source tools provide a powerful, free, and portable platform for students to create their own designs, solving assignments focused on industry readiness. Finally, this thesis studies the results and challenges …

Development Of Interactive Games On An Affordable Braille Display, Daniel Tsivkovski, Dylan Ravel, Maryam Etezad

Student Scholar Symposium Abstracts and Posters

Developing an affordable and STEM learning-focused Braille display addresses a significant disparity in the market for Braille displays, where most fail to provide a cost-effective, accessible, and education-oriented solution. This research aims to bridge this gap through innovative hardware and software development, offering a comprehensive learning experience to elementary school children (K-6) who are blind/visually impaired. The hardware features a piezo-electric tactile display that displays up to six Braille characters at once or a shape in an 8x8 pin array configuration. The educational software includes a user-friendly website packed with engaging STEM activities specifically designed for blind/visually impaired children. The …

Breaking New Ground: Division Directly In Memory, M. Hassan Najafi, Mehran Shoushtari Moghadam

Faculty Scholarship

In-memory computing (IMC) has emerged as a promising paradigm for overcoming the limitations of traditional von Neumann architectures by reducing data movement and enhancing computational efficiency. Despite significant advancements in this area, implementing complex arithmetic operations, such as division, directly within memory has remained an elusive challenge. This paper introduces a pioneering technique for performing division operations directly in memory, representing the first successful integration of such functionality into the IMC framework. Our approach leverages an innovative circuit based on an unconventional model of computing–stochastic computing (SC). Our technique extends the computational capabilities of IMC systems and paves the way …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Modality Distillation Using A Sam-Guided Multimodal Teacher For Unimodal Wildfire Segmentation And Temperature Prediction, Michael N. Marinaccio

All Theses

Wildfires are one of the world’s most devastating natural disasters that affect the environment, communities, and more critically, humans that live in and around those communities. Due to the threat of large-scale destruction in landscapes and human inhabited areas, it has become increasingly more important to develop wildfire detection, management, and suppression strategies to mitigate and prevent these negative outcomes. Wildfire research encompasses many different areas. Most notably, the development of communication, navigation, remote sensing, and monitoring systems. In wildfire monitoring, limitations discovered in-ground and satellite observation have shifted the focus toward Unmanned Aerial Vehicle (UAV) based wildfire research, which …

Design Considerations Of A Gpu, Nicholas M. Devilliers

Electrical Engineering and Computer Science Undergraduate Honors Theses

With the current era of AI technology, the era of single instruction multiple data has become an increasingly viable solution to accelerate training. The problem is that while software to use GPUs and other hardware accelerators, designing GPUs and ASIC devices has become increasingly more expensive and there aren’t great examples of generic GPUs that anyone can use and modify. In this thesis, there are four design considerations that will be discussed and how they affect the result of a generic GPU. The four considerations that were talked about in the thesis are, word width, arithmetic type, number of stages, …

Lightlink: Visible Light Communication For Batteryless Devices With Variable Computational Load, Charles Phillips

All Theses

Visible Light Communication (VLC) devices have been experimentally proven to work as a suitable communication medium for batteryless devices. However, the effects of practical load have yet to be fully explored. To that end, we have developed LightLink, a new MAC and PHY layer protocol for VLC within batteryless devices, and have studied various ways that computational load can affect transmission accuracy in realistic scenarios. Our key findings point us towards an adaptive VLC reception system based on inferred environmental variables.

Swvl: A Custom Ai-Powered Face Tracking Camera Gimbal, Alexander J. Anderson-Mcleod, Jakub Jerzmanowski, Michael Laitarovsky, Trevor Allison, Jagger Tanner

Senior Theses

In response to the growing demand for smarter, more responsive face tracking cameras in the post-pandemic world, our team designed SWVL, a custom AI-powered face tracking gimbal meant to address the limitations commonly encountered by the commercial models currently on the market. These commercially available gimbals come with several issues, such as frequently losing track of the person in the frame and requiring manual resets, which we sought to fix with our implementation. We designed a system with fully custom hardware and software including a 3D printed dual-axis camera gimbal driven by stepper motors, a control PCB based around an …

Design And Implementation Of Uvm-Based Verification Framework For Deep Learning Accelerators, Randa Ahmed Hussein Aboudeif

Theses and Dissertations

Recent advancements in deep learning (DL) have made hardware accelerators, known as deep learning accelerators (DLAs), a preferred solution for numerous high-performance computing (HPC) applications, including speech recognition, computer vision, and image classification. DLAs are composed of hundreds of parallel processing engines to speed up computations and can gain access to pre-trained networks from the cloud or through on-chip memory to implement the DNN inference process. DLA verification is becoming an important and challenging phase. The verification process is required to handle the complex DLA design. Moreover, the reliability of DLAs is critical for assessment as they are involved in …

Automatic Cat Caretaker, Connor Mcclenathan, Ryan Anderson, Andrew Tate

Williams Honors College, Honors Research Projects

This project will involve developing and constructing a self-cleaning litter box with feeding and watering functions attached. The machine will have a user interface for setting both the feeding and watering times, as well as how much to fill the food and water bowls at the same time. The project will involve the use of motors for the cleaning, feeding, and watering functions, sensors to detect when to perform those functions, and a microcontroller to process all the data and to tell the motors when to perform their respective functions. This project's goal is to make the task of caring …