Hardware Systems Commons^™

Trace Flight Computer, Zachary Stratton, Vandad Mossavand Varkaneh, Nicholas Ely

Williams Honors College, Honors Research Projects

In the world of collegiate rocketry, there are currently no commercial-off-the-shelf flight computers capable of being fitted to liquid engine rockets with thrust vectoring control. Currently, amateur rocketeers utilize unreliable Arduino-based systems or expensive drone computers. The objective of this project is to design a flight computer capable of data collection and filtering, telemetry transmission, and real-time controls of critical safety systems using readily available commercial-off-the-shelf components to allow rocketeers to complete their designs within a reasonable budget. The system will collect data from two IMUs, a barometric altimeter, and a magnetometer, then filter the collected data using custom Kalman …

Fail-Safe Logic Design Strategies Within Modern Fpga Architectures, Priya A. Bhakta

Electrical and Computer Engineering ETDs

Field Programmable Gate Arrays (FPGAs) are vulnerable to radiation-induced single event upsets (SEUs) and fault injection attacks, requiring the use of redundancy techniques such as fail-safe computing. Fail-safe computing refers to computing systems that revert to a non-operational safe state when a fault occurs. This work investigates circuit-level techniques and implements fail-safe computing processes as mitigation for SEUs and fault injection attacks on FPGAs. The analysis reveals vulnerabilities that exist in FPGAs over those in application-specific integrated circuits (ASIC); thus, requiring a more elaborate network of redundant circuits and checking logic. The reconfiguration capability of FPGAs adds complexity to fail-safe …

Exploring Smart Thermostat, Don P. Dang

2024 Fall Honors Capstone Projects - Archive

This study examines the security, privacy, and compatibility challenges associated with smart thermostats in smart home systems. Smart thermostats, as part of the growing Internet of Things (IoT) ecosystem, face vulnerabilities such as unauthorized access, data breaches, and inconsistent security protocols. Using a mixed-methods approach, this research evaluates encryption techniques, communication protocols (Zigbee, Z-Wave, Wi Fi), and user behaviors that impact system security and efficiency. Key findings indicate that 35% of users are concerned about hacking risks, while 25% express data privacy concerns. Many users lack awareness of security measures, such as firmware updates and password management, which increases vulnerabilities. …

Leveraging P4 Programmable-Hardware Switches For In-Network Pmu Packet Recovery, Evan Michael Bonar

Electrical Engineering and Computer Science Undergraduate Honors Theses

Phasor Measurement Unit (PMU) systems are essential for real-time power grid monitor- ing but often face data loss due to network delays, equipment malfunctions, or transmis- sion errors. Traditional centralized recovery solutions introduce significant latency and scalability challenges. This thesis presents a P4-based in-network recovery mechanism that embeds detection and recovery directly into the data plane of P4-enabled programmable switches, significantly reducing recovery time and infrastructure complexity. Using the Aurora 610 switch, the system detects missing packets via sequence number analysis and recovers magnitudes with an efficient register-based algorithm.

Evaluation demonstrates high accuracy and low latency, achieving a mean absolute …

Building A Wireless Electronic Control Unit For An Electric Vehicle, Hector S. Sosa

2024 Spring Honors Capstone Projects - Archive

Modern vehicles have a variety of features such remote start systems, advance drive assist systems, smart suspension systems, and a feature rich infotainment system. With all this technology in the car, there exists a complex network of computers working together in conjunction to deliver the modern driving experience that many people have today. To be competitive in the market, auto manufacturers are tasked to add additional features to vehicles by adding additional or modifying electronic control units (ECUs). In this study, an ECU will be designed for a mock electric vehicle which contains an already established network of ECU’s. The …

Development Of A Multi-Use Modular Microfluidic Platform Using 3d Printing, Carson Emeigh

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Microfluidic lab-on-a-chip (LoC) technology has driven numerous innovations due to their ability to perform laboratory-scale experiments on a single chip using microchannels. Although LoC technology has been innovative, it still suffers from limitations related to its fabrication and design flexibility. Typical LoC fabrication, with photolithography, is time consuming, expensive, and inflexible. To overcome the limitations of LoC devices, modular microfluidic platforms have been developed where multiple microfluidic modules, each with a specific function or group of functions, can be combined on a single platform. Modular microfluidics have overcome some of the limitations of LoC devices, but currently, their fabrication is …

Summonable Construction Delivery Robot, Kevin M. Lewis

Honors Capstones

In many different construction industries, there is a need for tools, parts, and other necessary items to be transported quickly and efficiently over various types of terrain. Human resources have often been used to address these needs, which can become very time and cost inefficient over long periods. The design proposal here is aimed at addressing this need by developing an autonomous outdoor mobile robot based on a quadrupedal robot design. This approach differs by incorporating a wheeled and quadrupedal hybrid actuation system that provides terrain negotiation and speed at the appropriate times. The team uses Robot Operating System (ROS) …

Towards A Wearable Device For Measuring Impedance Plethysmography Of The Radial Artery, Pritom Chowdhury

Dartmouth College Master’s Theses

Recent advancements in bioimpedance technology have demonstrated significant promise in the application of cardiac health monitoring. This research explores the design and development of a forearm-based wearable bioimpedance device for non-invasive measurement of heart rate and respiratory rate at an accuracy level comparable to medical-grade monitors. It utilizes a tetrapolar electrode configuration to analyze bioimpedance changes in the radial artery due to blood flow.

An ongoing aspect of this work involves the preliminary development of an embedded framework intended to integrate signal generation, acquisition, and processing within the device to achieve compact and efficient system design, anticipated to contribute to …

Exploring Machine Learning Techniques For Embedded Hardware, Neel R. Vora

Computer Science and Engineering Theses - Archive

This thesis delves into the intricate symbiosis between machine learning (ML) methodologies and embedded hardware systems, with a primary focus on augmenting efficiency and real-time processing capabilities across diverse application domains. It confronts the formidable challenge of deploying sophisticated ML algorithms on resource-constrained embedded hardware, aiming not only to optimize performance but also to minimize energy consumption. Innovative strategies are explored to tailor ML models for streamlined execution on embedded platforms, with validation conducted across various real-world application domains. Notable contributions include the development of a deep-learning framework leveraging a variational autoencoder (VAE) for compressing physiological signals from wearables while …

Reinventing Integrated Photonic Devices And Circuits For High Performance Communication And Computing Applications, Venkata Sai Praneeth Karempudi

Theses and Dissertations--Electrical and Computer Engineering

The long-standing technological pillars for computing systems evolution, namely Moore's law and Von Neumann architecture, are breaking down under the pressure of meeting the capacity and energy efficiency demands of computing and communication architectures that are designed to process modern data-centric applications related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In response, both industry and academia have turned to 'more-than-Moore' technologies for realizing hardware architectures for communication and computing. Fortunately, Silicon Photonics (SiPh) has emerged as one highly promising ‘more-than-Moore’ technology. Recent progress has enabled SiPh-based interconnects to outperform traditional electrical interconnects, offering advantages like high bandwidth density, …

Autonomous Basketball Court Creation Robot, Bryce Haldeman, Tyler Gray, Dalon Vura

Williams Honors College, Honors Research Projects

The Autonomous Basketball Court Outlining System presents a comprehensive solution for precision court marking. Powered by a 24V lithium-ion battery and driven by a single ST microcontroller, the system autonomously marks the outline of a half basketball court using predefined algorithms. User-friendly features include easy loading of marking material, actuated by gravity or a small servo motor depending on material of choice, ensuring intuitive operation. Safety is prioritized, with the servo motor eliminating high-pressure concerns, and the system maintains a controlled speed accounting for user well-being. Two step and direction servo motors enable accurate linear displacement, facilitating straight lines, and …

A Novel Processor Architecture Implementing The Stacked Error Diffusion Algorithm And Its Zynq-Based Realization, Qishi Hu

Theses and Dissertations--Electrical and Computer Engineering

Digital halftoning reproduces continuous-tone images using patterns of black and white dots, while multitoning extends this concept by incorporating inks with intermediate intensities. These techniques are extensively utilized in the printing industry to accommodate the limited range of inks available in printers. Stacked error diffusion is a high-quality multitoning algorithm that adheres to the blue-noise dithering standard. This thesis research studies the potential parallelism inherent in the algorithm and introduces the design of a novel processor architecture optimized for efficient execution. The architecture is realized on an FPGA development board featuring a Zynq SoC. Additionally, the hardware prototype can also …

The Integration Of Neuromorphic Computing In Autonomous Robotic Systems, Md Abu Bakr Siddique

Dissertations, Master's Theses and Master's Reports

Deep Neural Networks (DNNs) have come a long way in many cognitive tasks by training on large, labeled datasets. However, this method has problems in places with limited data and energy, like when planetary robots are used or when edge computing is used [1]. In contrast to this data-heavy approach, animals demonstrate an innate ability to learn by communicating with their environment and forming associative memories among events and entities, a process known as associative learning [2-4]. For instance, rats in a T-maze learn to associate different stimuli with outcomes through exploration without needing labeled data [5]. This learning paradigm …

Implementing Associative Learning Using Neuromorphic Robot, Vinay Kumar Pillalamarri

Dissertations, Master's Theses and Master's Reports

Associative learning, a key cognitive process seen across the animal kingdom, enables organisms to form connections between stimuli and adapt their behaviors based on past experiences. A particularly powerful example is fear conditioning, where animals learn to associate a neutral stimulus with an aversive one, allowing them to predict and avoid potential threats. Inspired by this mechanism, this project implements associative learning on an unmanned ground vehicle (UGV) to develop adaptive behavior through neuromorphic principles. Utilizing Nengo for neural modeling, the UGV learns to associate visual (red color) and tactile (vibration) stimuli through Hebbian learning, a biologically inspired synaptic adaptation …

An Fpga-Based Eit System For Deep Space Medical Imaging, Kendall R. Farnham

Dartmouth College Ph.D Dissertations

Dangers associated with high radiation and microgravity exposure in space are critical challenges inhibiting us from exploring deep space and pursuing long-duration missions, as current medical systems are unable to monitor, diagnose, or treat tissue injury within physical spacecraft constraints and communication limits. Ultrasound (US) is the current imaging system used on the International Space Station, but this technology relies on telemedical support (or onboard artificial intelligence/autonomous capabilities) for both operation and diagnosis, posing challenges for crews isolated in deep space. Electrical impedance tomography (EIT) is a non-invasive, non-ionizing technology that produces images of the electrical properties of tissues and …

Adaptive Traction, Power And Torque Control Strategies And Optimization In An All-Electric Powertrain, Aymane Hidara

Theses and Dissertations

Electric and hybrid-electric vehicles lean heavily on intricate control algorithms to provide smooth, reliable, and secure operations under any driving conditions. Three distinct supervisory control strategies have been developed, each aiming to improve reliability and vehicle performance of a dual-motor electric vehicle equipped with an all-wheel-drive, fully electric powertrain. These algorithms are adept at dynamically modulating and constraining the torque provided to the wheels, leveraging two autonomous permanent magnet electric drive units. This study utilizes a vehicle model jointly provided by MathWorks and General Motors in partnership with industry sponsors. The these strategies were implemented in the model and enhanced …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Electronic Note-String Detector, Gavin Garcia-Rossi, Tommy Smail

Electrical Engineering

As the virtual space has become a dominant part of everyone’s day-to-day lives, many normal face-to-face interactions and services have not yet been facilitated by adapting technology. One of these prevailing areas is music lessons. Over Zoom meetings, or other virtual platforms, it is tremendously challenging to teach students. These challenges include recognizing student mistakes audibly and visually, and being able to give confident feedback on the incorrect notes played by learning musicians. Without having to delve into improving the complex systems that would be required to improve audio, video, and connection quality of these connections, we have another solution …

Qasm-To-Hls: A Framework For Accelerating Quantum Circuit Emulation On High-Performance Reconfigurable Computers, Anshul Maurya

Theses and Dissertations

High-performance reconfigurable computers (HPRCs) make use of Field-Programmable Gate Arrays (FPGAs) for efficient emulation of quantum algorithms. Generally, algorithm-specific architectures are implemented on the FPGAs and there is very little flexibility. Moreover, mapping a quantum algorithm onto its equivalent FPGA emulation architecture is challenging. In this work, we present an automation framework for converting quantum circuits to their equivalent FPGA emulation architectures. The framework processes quantum circuits represented in Quantum Assembly Language (QASM) and derives high-level descriptions of the hardware emulation architectures for High-Level Synthesis (HLS) on HPRCs. The framework generates the code for a heterogeneous architecture consisting of a …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

The Roadmap To An Improved Braille Display Design, Emma Garofalo, Trey Alexander, Luke Shankland, Michael Smith, Michael Cheng, Michael Bishai, Lauren Sun

Student Scholar Symposium Abstracts and Posters

Our innovative braille display, focused on affordability and education, fills a notable void in the market of refreshable braille displays, which are typically costly and not designed primarily for educational use. This product stands out as an economical educational aid for people with visual impairments. It features a system where pressing a keyboard alphabet key corresponds to specific braille pins, allowing for the display of letters or characters. Additionally, our design can represent simple geometric shapes, like circles or squares, using the braille pins. When these pins are raised, the user can feel the braille representation of the character or …

Custom Led Dashboard Integration For The Cal Poly Racing Team, Josue Hernandez

Computer Engineering

The Custom LED Dashboard Integration was made for the Cal Poly Racing Team, specifically the BAJA division. The dashboard was made as a way to combat the current limitations endured from the past methods used to display critical information of the vehicle to the car. The display was made to combat issues of limited quantity of data being able to be displayed to the driver and its small readability was an issue, the display helped combat that by providing a greater quantity of data being able to be sent and displayed on the display and the information being displayed having …

Watch: A Distributed Clock Time Offset Estimation Tool On The Platform For Open Wireless Data-Driven Experimental Research, Cassie Jeng

McKelvey School of Engineering Graduate Student Theses & Dissertations

The synchronization of the clocks used at different devices across space is of critical importance in wireless communications networks. Each device’s local clock differs slightly, affecting the times at which packets are transmitted from different nodes in the network. This thesis provides experimentation and software development on POWDER, the Platform for Open, Wireless Data-driven Experimental Research, an open wireless testbed across the University of Utah campus. We build upon Shout, a suite of Python scripts that allow devices to iteratively transmit and receive with each other and save the collected data. We introduce WATCH, an experimental method to estimate clock …

Sel4 On Risc-V - Developing High Assurance Platforms With Modular Open-Source Architectures, Michael A. Doran Jr

Masters Theses

Virtualization is now becoming an industry standard for modern embedded systems. Modern embedded systems can now support multiple applications on a single hardware platform while meeting power and cost requirements. Virtualization on an embedded system is achieved through the design of the hardware-software interface. Instruction set architecture, ISA, defines the hardware-software interface for an embedded system. At the hardware level the ISA, provides extensions to support virtualization.

In addition to an ISA that supports hypervisor extensions it is equally important to provide a hypervisor completely capable of exploiting the benefits of virtualization for securing modern embedded systems. Currently there does …

Virtual Prototyping Of Pebb Based Power Electronics System For Ground Vehicles, Yi Li

All Theses

Power electronics are heavily involved in power and energy systems in plenty of applications nowadays. The increase of demand brings more challenges into simulations for development. Considering the complexity of the systems and high frequency operational conditions, this paper presents comprehensive research on modeling, simulating, and validation on ground vehicle propulsion system applications.

To reduce the computational burden, the Power Electronics Building Blocks concept is utilized to simplify the structure of modeling under different conversion scenarios in ground vehicle systems. In addition, the Average and Switching versions models are included. To speedup the simulation, the engagement of advanced computing technique …

Characterization And Estimation Of Musculoskeletal Pain Using Machine Learning, Boluwatife Faremi

Master's Theses

Traditional scales utilized for recording pain are known to be highly subjective and biased due to inaccuracies in recollecting actual pain intensities. As a result, machine learning (ML) models that are trained using these scores as ground truth are reported to have low performance for objective pain classification because of the huge disparity between what was felt in moments of pain and the scores recorded afterward.

In the present study, two devices were designed for gathering real-time, continuous in-session subjective pain scores and the recording of the autonomic nervous system (ANS) altered endodermal (EDA) activity. 24 participants were recruited to …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Phone Microwave, Khanh Kim Hoang, Emily Zhou

Computer Engineering

This project involves the installation of remote-control capabilities in an antique 1980s microwave, effectively turning the microwave into a “smart” device. While preserving the original functionality of the microwave, a combination of software and hardware components allows for remote microwave operations. The microwave can be remotely operated by calling the built-in number, and more advanced settings and options can be utilized by texting. The microwave is also secured against unauthorized use with the addition of a PIN code that is required to operate the device.

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Imitation Learning For Swarm Control Using Variational Inference, Hafeez Olafisayo Jimoh

Graduate Theses, Dissertations, and Problem Reports (ETD)

Swarms are groups of robots that can coordinate, cooperate, and communicate to achieve tasks that may be impossible for a single robot. These systems exhibit complex dynamical behavior, similar to those observed in physics, neuroscience, finance, biology, social and communication networks, etc. For instance, in Biology, schools of fish, swarm of bacteria, colony of termites exhibit flocking behavior to achieve simple and complex tasks. Modeling the dynamics of flocking in animals is challenging as we usually do not have full knowledge of the dynamics of the system and how individual agent interact. The environment of swarms is also very noisy …