Computer Engineering Commons^™

Effects Of Surface Noise On Printing Artifacts: An Artistic Approach To Hiding Print Artifacts, Samuel New

All Theses

This research focuses on improving the quality of Fused Filament Fabrication (FFF) 3D printing by using fractal noise to mask certain print artifacts (e.g. layer lines and stair-stepping). The use of textures is quite common in digital sculpting for aesthetic reasons. This study focuses on finding specific textures that minimize visible 3D print artifacts.

Sequential Frame-Interpolation And Dct-Based Video Compression Framework, Yeganeh Jalalpour, Wu-Chi Feng, Feng Liu

Computer Science Faculty Publications and Presentations

Video data is ubiquitous; capturing, transferring, and storing even compressed video data is challenging because it requires substantial resources. With the large amount of video traffic being transmitted on the internet, any improvement in compressing such data, even small, can drastically impact resource consumption. In this paper, we present a hybrid video compression framework that unites the advantages of both DCT-based and interpolation-based video compression methods in a single framework. We show that our work can deliver the same visual quality or, in some cases, improve visual quality while reducing the bandwidth by 10--20%.

A Mechanically Intelligent Hosing-Drone, Blake Hament

UNLV Theses, Dissertations, Professional Papers, and Capstones

This manuscript presents a ”mechanically intelligent” approach to designing a Hosing-Drone for heavy-duty pressure washing. Spraying a hose creates strong reaction forces and torques. Previously demonstrated spraying robots are over-engineered to be very massive with huge inertias. These high inertias ”wash out” the reaction from the spraying. In the proposed approach, the contributions from all observable fluid dynamics, fluid structure interactions, and aerodynamics are studied individually and for the coupled system. Experimental data is collected and fit to dynamic models. These models are used to design a smaller, lighter, more agile vehicle than has been previously demonstrated. An impedance controller …

Scalable Data-Driven Predictive Modeling And Analytics For Cho Process Development Optimization, Sarah Mbiki

All Dissertations

In 1982, the FDA approved the first recombinant therapeutic protein, and since then, the biopharmaceutical industry has continued to develop innovative and highly effective biological drugs for various illnesses¹. These drugs are produced using host organisms that are modified to hold the genetic encoding of the targeted protein¹. Of the many host organisms, Chinese hamster ovary (CHO) cells are often used due to capability to perform posttranslational modification (PTM): which allows human-like synthesis of proteins unlikely to invoke immunogenicity in humans ^1,2.

Despite all the positive attributes, many challenges are associated with CHO cell cultures, …

Digital Forensics For Investigating Control-Logic Attacks In Industrial Control Systems, Nauman Zubair

LSU New Orleans Theses and Dissertations

Programmable logic controllers (PLC) are required to handle physical processes and thus crucial in critical infrastructures like power grids, nuclear facilities, and gas pipelines. Attacks on PLCs can have disastrous consequences, considering attacks like Stuxnet and TRISIS. Those attacks are examples of exploits where the attacker aims to inject into a target PLC malicious control logic, which engineering software compiles as a reliable code. When investigating a security incident, acquiring memory can provide valuable insight such as runtime system activities and memory-based artifacts which may contain the attacker's footprints. The existing memory acquisition tools for PLCs require a hardware-level debugging …

Towards Orchestration In The Cloud-Fog Continuum, Xavier Jesus Merino Aguilera

Theses and Dissertations

The proliferation of the Internet-of-Things has raised demand for computing, storage, and network resources. The cloud model is ill-equipped to handle the volume and variety of data travelling to and from the cloud’s core as more data is generated and consumed at the network’s edge. Some applications necessitate low-latency connectivity and geographical awareness, highlighting the cloud’s centralization shortcomings. By localizing resources, minimizing bandwidth utilization, and lowering latency, the fog and edge layers are proposed to circumvent these limitations. At these layers, resource orchestration is crucial because poor resource management has an impact on service delivery. The aim of this study …

Nigeria’S Budding Digital Economy: Coping With Disruptive Technology, Olugbenga Agboola

Economic and Financial Review

For a thriving and inclusive digital economy, African countries such as Nigeria need to build the critical foundations of the digital economy (World Bank Group, 2019). These foundations are interdependent and require public and private sector solutions.

Low Power Multi-Channel Interface For Charge Based Tactile Sensors, Samuel Hansen

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Analog front end electronics are designed in 65 nm CMOS technology to process charge pulses arriving from a tactile sensor array. This is accomplished through the use of charge sensitive amplifiers and discrete time filters with tunable clock signals located in each of the analog front ends. Sensors were emulated using Gaussian pulses during simulation. The digital side of the system uses SAR (successive approximation register) ADCs for sampling of the processed sensor signals.

Adviser: Sina Balkır

A Low-Power, Low-Area 10-Bit Sar Adc With Length-Based Capacitive Dac, Zhili Pan

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A 2.5 V single-ended 10-bit successive-approximation-register analog-to-digital converter (SAR ADC) based on the TSMC 65 nm CMOS process is designed with the goal of achieving low power consumption (33.63 pJ/sample) and small area (2874 µm^2 ). It utilizes a novel length-based capacitive digital-to-analog converter (CDAC) layout to achieve low total capacitance for power efficiency, and a custom static asynchronous logic to free the dependence on a high-frequency external clock source. Two test chips have been designed and the problems found through testing the first chip are analyzed. Multiple improved versions of the ADC with minor variations are implemented on the …

Learnfca: A Fuzzy Fca And Probability Based Approach For Learning And Classification, Suraj Ketan Samal

School of Computing: Dissertations, Theses, and Student Research

Formal concept analysis(FCA) is a mathematical theory based on lattice and order theory used for data analysis and knowledge representation. Over the past several years, many of its extensions have been proposed and applied in several domains including data mining, machine learning, knowledge management, semantic web, software development, chemistry ,biology, medicine, data analytics, biology and ontology engineering.

This thesis reviews the state-of-the-art of theory of Formal Concept Analysis(FCA) and its various extensions that have been developed and well-studied in the past several years. We discuss their historical roots, reproduce the original definitions and derivations with illustrative examples. Further, we provide …

Sequence-Based Bioinformatics Approaches To Predict Virus–Host Relationships In Archaea And Eukaryotes, Yingshan Li

School of Computing: Dissertations, Theses, and Student Research

Viral metagenomics is independent of lab culturing and capable of investigating viromes of virtually any given environmental niches. While numerous sequences of viral genomes have been assembled from metagenomic studies over the past years, the natural hosts for the majority of these viral contigs have not been determined. Different computational approaches have been developed to predict hosts of bacteria phages. Nevertheless, little progress has been made in the virus-host prediction, especially for viruses that infect eukaryotes and archaea. In this study, by analyzing all documented viruses with known eukaryotic and archaeal hosts, we assessed the predictive power of four computational …

Attention In The Faithful Self-Explanatory Nlp Models, Mostafa Rafaiejokandan

School of Computing: Dissertations, Theses, and Student Research

Deep neural networks (DNNs) can perform impressively in many natural language processing (NLP) tasks, but their black-box nature makes them inherently challenging to explain or interpret. Self-Explanatory models are a new approach to overcoming this challenge, generating explanations in human-readable languages besides task objectives like answering questions. The main focus of this thesis is the explainability of NLP tasks, as well as how attention methods can help enhance performance. Three different attention modules are proposed, SimpleAttention, CrossSelfAttention, and CrossModality. It also includes a new dataset transformation method called Two-Documents that converts every dataset into two separate documents required by the …

Modeling, Control And Estimation Of Reconfigurable Cable Driven Parallel Robots, Adhiti Raman Thothathri

All Dissertations

The motivation for this thesis was to develop a cable-driven parallel robot (CDPR) as part of a two-part robotic device for concrete 3D printing. This research addresses specific research questions in this domain, chiefly, to present advantages offered by the addition of kinematic redundancies to CDPRs. Due to the natural actuation redundancy present in a fully constrained CDPR, the addition of internal mobility offers complex challenges in modeling and control that are not often encountered in literature.

This work presents a systematic analysis of modeling such kinematic redundancies through the application of reciprocal screw theory (RST) and Lie algebra while …

The Effects Of Virtual Reality On Mental Health Software User Satisfaction And Retention, William Hooten

Honors Theses

Mental health issues have become increasingly important in today's society. With that being said, researchers and consumers are looking for new ways to manage and treat mental health using new technologies in labs and the consumer space. This innovation has led to the presence of mobile self-help mental health applications, applications for peoples’ phones that are used to manage symptoms of mental health problems, such as depression and anxiety, track goals, meditate, and more. However, mobile mental health applications, and mobile applications in general, have a problem concerning user satisfaction and overall user retention – studies have shown that 95% …

Modeling, Verification, And Simulation Of A Uav Swarm Consensus Protocol, Rohit Martin Menghani

Theses and Dissertations

Unmanned Aerial Vehicles (UAVs), particularly electrically powered multi-rotors, are becoming increasingly popular in the entertainment, transportation, logistics, and military sectors. One of the main drawbacks presented by these vehicles at the time of writing is the limited range achieved as a consequence of the limits of battery technology. One common method used to overcome such limitations, is the use of multiple vehicles in cooperation to achieve a certain goal. This application of UAVs is called swarming, where multiple agents can coordinate their actions to fly in a certain formation, to access a certain challenging area, or to fly further. As …

Optimized Learning Using Fuzzy-Inference-Assisted Algorithms For Deep Learning, Miroslava Barua

Open Access Theses & Dissertations

For years, researchers in Artificial Intelligence (AI) and Deep Learning (DL) observed that performance of a Deep Learning Network (DLN) could be improved by using larger and larger datasets coupled with complex network architectures. Although these strategies yield remarkable results, they have limits, dictated by data quantity and quality, rising costs by the increased computational power, or, more frequently, by long training times on networks that are very large. Training DLN requires laborious work involving multiple layers of densely connected neurons, updates to millions of network parameters, while potentially iterating thousands of times through millions of entries in a big …

Online/Incremental Learning To Mitigate Concept Drift In Network Traffic Classification, Alberto R. De La Rosa

Open Access Theses & Dissertations

Communication networks play a large role in our everyday lives. COVID19 pandemic in 2020 highlighted their importance as most jobs had to be moved to remote work environments. It is possible that the spread of the virus, the death toll, and the economic consequences would have been much worse without communication networks. To remove sole dependence on one equipment vendor, networks are heterogeneous by design. Due to this, as well as their increasing size, network management has become overwhelming for network managers. For this reason, automating network management will have a significant positive impact. Machine learning and software defined networking …

Intelligent Autonomous Inspections Using Deep Learning And Detection Markers, Alejandro Martinez Acosta

Open Access Theses & Dissertations

Inspection of industrial and scientific facilities is a crucial task that must be performed regularly. These inspections tasks ensure that the facilityâ??s structure is in safe operational conditions for humans. Furthermore,the safe operation of industrial machinery, is dependent on the conditions of the environment. For safety reasons, inspections for both structural integrity and equipment is often manually performed by operators or technicians. Naturally, this is often a tedious and laborious task. Additionally, buildings and structures frequently contain hard to reach or dangerous areas, which leads to the harm, injury or death of humans. Autonomous robotic systems offer an attractive solution …

Security Analysis And Implementation Of Dnp3 Multilayer Protocol For Secure And Safe Communication In Scada Systems, Isaac Monroy

Open Access Theses & Dissertations

When SCADA systems were first introduced into society, a lot of manpower was required for monitoring and controlling devices within critical infrastructures. With the increasing demand for services and growing systems, a need arose to automate the monitoring and controlling tasks. This led to introduction of networks into SCADA systems to enhance monitoring and control capabilities, that can scale with system size and requirements. But this introduction of network layer along with its advantages, also introduced a new threat surface which exposed multiple vulnerabilities within the system that can exploited to launch attacks, that led to the integration of security …

An Overview Of Bidirectional Electric Vehicles Charging System As A Vehicle To Anything (V2x) Under Cyber–Physical Power System (Cpps), Onur Elma, Umit Cali, Murat Kuzlu

Engineering Technology Faculty Publications

Nowadays, EVs are rapidly increasing in popularity, and are accepted as the vehicles of the future all over the world. The most important components are their battery and charging systems. The energy capacity of EVs’ batteries has a significant potential to supply different energy requirements. Therefore, EVs must be designed in accordance with bidirectional power flow, and Electric Vehicle Supply Equipment (EVSE) should be upgraded as Electric Vehicle Power Exchange Equipment (EVPE). This power exchange infrastructure can be called Vehicle-to-Anything (V2X). V2X will also be the key solution for energy grids of the future that will turn into a much …

Productivity And Quality Evaluation In Assembly Using Collaborative Robots, Carlos F. Manzanares Vega

Open Access Theses & Dissertations

In Industry 4.0, various technologies have been applied to achieve automation for traditional manufacturing and practices. For this reason, Smart Manufacturing (SM) environments utilize collaborative robots for process optimization by integrating the Internet of Things (IoT). Cobots are equipped with sensors and/or other devices to be able to transmit data in real-time while performing their tasks. Consequently, such SM implementations improves the decision making and business development, such as supply chain and operations, by sharing real-time data from a plant operational level. The collaborative robots are also designed to safely interact and collaborate with humans to perform tasks and optimize …

Lung Cancer Type Classification, Mohit Ramajibhai Ankoliya

Electronic Theses, Projects, and Dissertations

Lung cancer is the third most common cancer in the U.S. This research focuses on classifying lung cancer cells based on their tumor cell, shape, and biological traits in images automatically obtained by passing through the

convolutional layers. Additionally, I classify whether the lung cell is adenocarcinoma, large cell carcinoma, squamous cell carcinoma, or normal cell carcinoma. The benefit of this classification is an accurate prognosis, leading to patients receiving proper therapy. The Lung Cancer CT(Computed Tomography) image dataset from Kaggle has been drawn with 1000 CT images of various types of lung cancer. Two state-of-the-art convolutional neural networks (CNNs) …

A Study Of Heart Disease Diagnosis Using Machine Learning And Data Mining, Intisar Ahmed

Electronic Theses, Projects, and Dissertations

Heart disease is the leading cause of death for people around the world today. Diagnosis for various forms of heart disease can be detected with numerous medical tests, however, predicting heart disease without such tests is very difficult. Machine learning can help process medical big data and provide hidden knowledge which otherwise would not be possible with the naked eye. The aim of this project is to explore how machine learning algorithms can be used in predicting heart disease by building an optimized model. The research questions are; 1) What Machine learning algorithms are used in the diagnosis of heart …

Transforming Character Faces Based On Perceived Personality Traits, Kara Porter

All Theses

The ability to read other human's faces is a crucial part of everyday life. Subconsciously, the human brain analyzes someone's face within the first few seconds of seeing it, making a variety of conclusions ~\cite{FacePerp} such as gathering information about emotional state and assuming character traits this person might possess. The purpose of this thesis is to create a tool that allows a user to alter features of a character's three dimensional (3D) face mesh to look increasingly or decreasingly like the character possesses certain personality traits. Using a sample set of randomly generated faces, a survey is conducted to …

Mitigating Popularity Bias In Recommendation With Unbalanced Interactions: A Gradient Perspective, Weijieying Ren, Lei Wang, Kunpeng Liu, Ruocheng Guo, Ee-Peng Lim, Yanjie Fu

Research Collection School Of Computing and Information Systems

Recommender systems learn from historical user-item interactions to identify preferred items for target users. These observed interactions are usually unbalanced following a long-tailed distribution. Such long-tailed data lead to popularity bias to recommend popular but not personalized items to users. We present a gradient perspective to understand two negative impacts of popularity bias in recommendation model optimization: (i) the gradient direction of popular item embeddings is closer to that of positive interactions, and (ii) the magnitude of positive gradient for popular items are much greater than that of unpopular items. To address these issues, we propose a simple yet efficient …

Dual-Band Circularly Polarized Shared Aperture Antenna For Cubesat Communication System, Syed Salman Kabir

Graduate Theses and Dissertations (2019 - present)

For space exploration, a special class of small satellite known as CubeSat, has become popular in academia and industry in recent years. Due to its low cost and short development time, researchers prefer CubeSat over large-scale satellites wherever possible. In academia, CubeSat has major applications in the field of space atmosphere, space-to-ground communication, weather forecasting, etc. Like other spacecrafts, CubeSat uses multiple antennas in different frequency bands to establish a communication link with ground stations. Recent CubeSat missions are generating a large amount of data which cannot be downlinked using conventional antennas. The demand for a compact antenna system that …

Iot In Smart Communities, Technologies And Applications., Muhammad Zaigham Abbas Shah Syed

Electronic Theses and Dissertations

Internet of Things is a system that integrates different devices and technologies, removing the necessity of human intervention. This enables the capacity of having smart (or smarter) cities around the world. By hosting different technologies and allowing interactions between them, the internet of things has spearheaded the development of smart city systems for sustainable living, increased comfort and productivity for citizens. The Internet of Things (IoT) for Smart Cities has many different domains and draws upon various underlying systems for its operation, in this work, we provide a holistic coverage of the Internet of Things in Smart Cities by discussing …

Guitar Note Analyzer - Picking Patterns & Scales, Tamara Lynn Houalla

Electrical Engineering

The Guitar Note Analyzer helps beginner-to-intermediate guitar players advance their playing skills. The project detects the successive picks of guitar strings in real time at a rate of two notes per second. The device detects the frequency of notes played within the range of 50Hz – 1.5KHz. The hardware – microphone sensor, amplification circuitry, and microcontroller - is secured inside the sound hole of the user’s guitar. The hardware extends out of the guitar and connects to the user’s laptop via a USB cable. This allows relevant information to be displayed live to the user on their monitor, and to …

Identification Of Factors Contributing To Traffic Crashes By Analysis Of Text Narratives, Cristian D. Arteaga-Sanchez

UNLV Theses, Dissertations, Professional Papers, and Capstones

The fatalities, injuries, and property damage that result from traffic crashes impose a significant burden on society. Current research and practice in traffic safety rely on analysis of quantitative data from crash reports to understand crash severity contributors and develop countermeasures. Despite advances from this effort, quantitative crash data suffers from drawbacks, such as the limited ability to capture all the information relevant to the crashes and the potential errors introduced during data collection. Crash narratives can help address these limitations, as they contain detailed descriptions of the context and sequence of events of the crash. However, the unstructured nature …

Infrastructure Development For Personalized Risk Prediction To Reduce Cardiovascular Disease In Childhood Cancer Survivors, Suman Shrestha

Dissertations and Theses (Open Access)

Although childhood cancer survivors have lengthy life expectancies, they run the risk of experiencing long-term health issues as a result of their treatment. The most frequent non-cancerous cause of morbidity and mortality for these survivors is cardiac disease. Radiation therapy (RT) has been linked in numerous cohort studies to a higher chance of developing a late cardiac disease in these survivors, and this risk rises with higher mean heart doses and increased RT exposure to larger cardiac volumes. Since, the heart is a heterogeneous organ made up of several distinct substructures, RT dose received by the entire heart does not …