Computer Engineering Commons^™

A Computationally Efficient Method For Calculation Of Strand Eddy Current Losses In Electric Machines, Alireza Fatemi, Dan M. Ionel, Nabeel Demerdash, Dave A. Staton, Rafal Wrobel, Yew Chuan Chong

Electrical and Computer Engineering Faculty Research and Publications

In this paper, a fast finite element (FE)-based method for the calculation of eddy current losses in the stator windings of randomly wound electric machines with a focus on fractional slot concentrated winding (FSCW) permanent magnet (PM) machines will be presented. The method is particularly suitable for implementation in large-scale design optimization algorithms where a qualitative characterization of such losses at higher speeds is most beneficial for identification of the design solutions which exhibit the lowest overall losses including the ac losses in the stator windings. Unlike the common practice of assuming a constant slot fill factor, sf, for all …

Detection And Quantification Of Aromatic Hydrocarbon Compounds In Water Using Sh-Saw Sensors And Estimation-Theory-Based Signal Processing, Karthick Sothivelr, Florian Bender, Fabien Josse, Antonio J. Ricco, Edwin E. Yaz, Rachel E. Mohler, Ravi Kolhatkar

Electrical and Computer Engineering Faculty Research and Publications

This work investigates a sensor system for direct groundwater monitoring, capable of aqueous-phase measurement of aromatic hydrocarbons at low concentrations (about 100 parts per billion (ppb)). The system is designed to speciate and quantify benzene, toluene, and ethylbenzene/xylenes (BTEX) in the presence of potential interferents. The system makes use of polymer-coated shear-horizontal surface acoustic wave devices and a signal processing method based on estimation theory, specifically a bank of extended Kalman filters (EKFs). This approach permits estimation of BTEX concentrations even from noisy data, well before the sensor response reaches equilibrium. To utilize estimation theory, an analytical model for the …

Sensor-Based Estimation Of Btex Concentrations In Water Samples Using Recursive Least Squares And Kalman Filter Techniques, Karthick Sothivelr, Florian Bender, Fabien Josse, Edwin E. Yaz, Antonio J. Ricco

Electrical and Computer Engineering Faculty Research and Publications

This work investigates sensor signal processing approaches that can be used with a sensor system for direct on-site monitoring of groundwater, enabling detection and quantification of BTEX (benzene, toluene, ethylbenzene and xylene) compounds at μg/L (ppb) concentrations in the presence of interferents commonly found in groundwater. A model for the sensor response to water samples containing multiple analytes was first formulated based on experimental results. The first signal processing approach utilizes only RLSE (recursive least squares estimation) whereas the second, a two-step processing technique, utilizes both RLSE and bank of Kalman filters for the estimation process. The estimation techniques were …

Robust Multi-Criteria Optimal Fuzzy Control Of Continuous-Time Nonlinear Systems, Xin Wang, Edwin E. Yaz

Electrical and Computer Engineering Faculty Research and Publications

This paper presents a novel fuzzy control design of continuous-time nonlinear systems with multiple performance criteria. The purpose behind this work is to improve the traditional fuzzy controller performance to satisfy several performance criteria simultaneously to secure quadratic optimality with inherent stability property together with dissipativity type of disturbance reduction. The Takagi– Sugeno fuzzy model is used in our control system design. By solving the linear matrix inequality at each time step, the control solution can be found to satisfy the mixed performance criteria. The effectiveness of the proposed technique is demonstrated by simulation of the control of the inverted …

Plasmonic Field Confinement For Separate Absorption-Multiplication In Ingaas Nanopillar Avalanche Photodiodes, Alan C. Farrell, Pradeep Senanayake, Chung-Hong Hung, George El-Howayek, Abhejit Rajagopal, Marc Currie, Majeed M. Hayat, Diana L. Huffaker

Electrical and Computer Engineering Faculty Research and Publications

Avalanche photodiodes (APDs) are essential components in quantum key distribution systems and active imaging systems requiring both ultrafast response time to measure photon time of flight and high gain to detect low photon flux. The internal gain of an APD can improve system signal-to-noise ratio (SNR). Excess noise is typically kept low through the selection of material with intrinsically low excess noise, using separate-absorption-multiplication (SAM) heterostructures, or taking advantage of the dead-space effect using thin multiplication regions. In this work we demonstrate the first measurement of excess noise and gain-bandwidth product in III–V nanopillars exhibiting substantially lower excess noise factors …

Forecasting Design Day Demand Using Extremal Quantile Regression, David Joseph Kaftan, Jarrett L. Smalley, George F. Corliss, Ronald H. Brown, Richard J. Povinelli

Electrical and Computer Engineering Faculty Research and Publications

Extreme events occur rarely, making them difficult to predict. Extreme cold events strain natural gas systems to their limits. Natural gas distribution companies need to be prepared to satisfy demand on any given day that is at or warmer than an extreme cold threshold. The hypothetical day with temperature at this threshold is called the Design Day. To guarantee Design Day demand is satisfied, distribution companies need to determine the demand that is unlikely to be exceeded on the Design Day.

We approach determining this demand as an extremal quantile regression problem. We review current methods for extremal quantile regression. …

Error Probabilities For Optical Receivers That Employ Dynamically Biased Avalanche Photodiodes, Georges El-Howayek, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

A novel theory was recently reported for the avalanche multiplication process in avalanche photodiodes (APDs) under dynamic reverse-biasing conditions. It has been shown theoretically that the bit-synchronized, periodic modulation of the electric field in the multiplication region can offer improvements in the gain-bandwidth product by reducing intersymbol interference in optical receivers. This paper reports a rigorous formulation of the sensitivity of optical receivers that employ dynamically biased APDs. To enable the sensitivity analysis, a recurrence theory is developed to calculate the joint probability distribution function (PDF) of the stochastic gain and avalanche buildup time in APDs that are operated under …

Survivable Cloud Network Mapping For Disaster Recovery Support, Feng Gu, Khaled B. Shaban, Nasir Ghani, Samee Khan, Mahshid R. Naeini, Majeed M. Hayat, Chadi Assi

Electrical and Computer Engineering Faculty Research and Publications

Network virtualization is a key provision for improving the scalability and reliability of cloud computing services. In recent years, various mapping schemes have been developed to reserve VN resources over substrate networks. However, many cloud providers are very concerned about improving service reliability under catastrophic disaster conditions yielding multiple system failures. To address this challenge, this work presents a novel failure region-disjoint VN mapping scheme to improve VN mapping survivability. The problem is first formulated as a mixed integer linear programming problem and then two heuristic solutions are proposed to compute a pair of failure region-disjoint VN mappings. The solution …

Improved Terahertz Modulation Using Germanium Telluride (Gete) Chalcogenide Thin Films, A. H. Gwin, C. H. Kodama, T. Laurvick, Ronald A. Coutu Jr., P. F. Taday

Electrical and Computer Engineering Faculty Research and Publications

We demonstrate improved terahertz (THz) modulation using thermally crystallized germanium telluride (GeTe) thin films. GeTe is a chalcogenidematerial that exhibits a nonvolatile, amorphous to crystalline phase change at approximately 200 °C, as well as six orders of magnitude decreased electrical resistivity. In this study, amorphous GeTe thin filmswere sputtered on sapphire substrates and then tested using THz time-domain spectroscopy (THz-TDS). The test samples, heated in-situ while collecting THz-TDS measurements, exhibited a gradual absorbance increase, an abrupt nonvolatile reduction at the transition temperature, followed by another gradual increase in absorbance. The transition temperature was verified by conducting similar thermal tests while …

Vocal Classification Of Vocalizations Of A Pair Of Asian Small-Clawed Otters To Determine Stress, Peter M. Scheifele, Michael T. Johnson, Michelle Fry, Benjamin Hamel, Kathryn Laclede

Electrical and Computer Engineering Faculty Research and Publications

Asian Small-Clawed Otters (Aonyx cinerea) are a small, protected but threatened species living in freshwater. They are gregarious and live in monogamous pairs for their lifetimes, communicating via scent and acoustic vocalizations. This study utilized a hidden Markov model (HMM) to classify stress versus non-stress calls from a sibling pair under professional care. Vocalizations were expertly annotated by keepers into seven contextual categories. Four of these—aggression, separation anxiety, pain, and prefeeding—were identified as stressful contexts, and three of them—feeding, training, and play—were identified as non-stressful contexts. The vocalizations were segmented, manually categorized into broad vocal type call types, and analyzed …

Establishing The Relative Merits Of Interior And Spoke-Type Permanent-Magnet Machines With Ferrite Or Ndfeb Through Systematic Design Optimization, Peng Zhang, Gennadi Y. Sizov, Dan M. Ionel, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

In this paper, a multiobjective design optimization method combining design-of-experiments techniques and differential-evolution algorithms is presented. The method was implemented and utilized in order to provide practical engineering insights for the optimal design of interior and spoke-type permanent-magnet machines. Two combinations with 12 slots and 8 poles and 12 slots and 10 poles, respectively, have been studied in conjunction with rare-earth neodymium-iron-boron (NdFeB) and ferrites. As part of the optimization process, a computationally efficient finite-element electromagnetic analysis was employed for estimating the performance of thousands of candidate designs. Three optimization objectives were concurrently considered for minimum total material cost, power …

Relating The Experimental Ionization Coefficients In Semiconductors To The Nonlocal Ionization Coefficients, Jeng Shiuh Cheong, Majeed M. Hayat, Xinxin Zhou, John P.R. David

Electrical and Computer Engineering Faculty Research and Publications

The experimentally determined impact ionization coefficients, , include intrinsically the presence of a dead-space, where carriers cannot impact ionize as they do not have sufficient energy. These, therefore, cannot be used by nonlocal ionization models, which require the enabled ionization coefficients, which describe the ionization probability after the dead-space. A relatively simple relationship is shown to exist between α'(β') and , which requires only the knowledge of the carrier threshold energies. This allows conventionally limited to the local model framework, to be used to give a very good prediction of the avalanche multiplication and excess noise for a wide range …

Investigation Of The Surface Adhesion Phenomena And Mechanism Of Gold-Plated Contacts At Superlow Making/Breaking Speed, Wanbin Ren, Cheng Chang, Yu Chen, Shengjun Xue, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Surface adhesion phenomena of gold-plated copper contact materials are studied in conditions of nonarc load (5/15/25 V and 0.2/0.5/1 A) and superlow speed (25 and 50 nm/s) realized by a piezoactuator during the making and breaking processes. It is shown that softening and melting of local asperities leads to interface adhesion, which results from the joule heat generated by the contact resistance; it is determined that the change of contact force with time obeys the negative exponential distribution and the time constant is associated with the adhesion force directly. Based on the fitting experimental data, the relationship between the adhesion …

Using Cross-Linked Su-8 To Flip-Chip Bond, Assemble, And Package Mems Devices, Robert A. Lake, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

This paper investigates using an SU-8 photoresist as an adhesive material for flip-chip bonding, assembling, and packaging microelectromechanical systems devices. An important factor, when using SU-8 as an adhesive material is to control ultraviolet (UV) exposure during fabrication to maximize bond strength due to material cross linking. This approach is much improved over previous efforts where SU-8 bake times and temperatures where changed to alter material cross-linking. In this paper, bake times and temperatures were maintained constant and total UV exposure energy was varied. Once fabricated, bond strength was systematically tested to determine the tensile loads needed to separate bonded …

Breaking The Buildup-Time Limit Of Sensitivity In Avalanche Photodiodes By Dynamic Biasing, Majeed M. Hayat, Payman Zarkesh-Ha, George El-Howayek, Robert Efroymson, Joe C. Campbell

Electrical and Computer Engineering Faculty Research and Publications

Avalanche photodiodes (APDs) are the preferred photodetectors for direct-detection, high data-rate long-haul optical telecommunications. APDs can detect low-level optical signals due to their internal amplification of the photon-generated electrical current, which is attributable to the avalanche of electron and hole impact ionizations. Despite recent advances in APDs aimed at reducing the average avalanche-buildup time, which causes intersymbol interference and compromises receiver sensitivity at high data rates, operable speeds of commercially available APDs have been limited to 10Gbps. We report the first demonstration of a dynamically biased APD that breaks the traditional sensitivity-versus-speed limit by employing a data-synchronous sinusoidal reverse-bias that …

Predicting Scenarios For Successful Autodissemination Of Pyriproxyfen By Malaria Vectors From Their Resting Sites To Aquatic Habitats; Description And Simulation Analysis Of A Field-Parameterizable Model, Samson Sifael Kiware, George F. Corliss, Stephen Merrill, Dickson W. Lwetoijera, Gregor J. Devine, Silas Majambere, Gerry F. Killeen

Electrical and Computer Engineering Faculty Research and Publications

Background

Large-cage experiments indicate pyriproxifen (PPF) can be transferred from resting sites to aquatic habitats by Anopheles arabiensis - malaria vector mosquitoes to inhibit emergence of their own offspring. PPF coverage is amplified twice: (1) partial coverage of resting sites with PPF contamination results in far higher contamination coverage of adult mosquitoes because they are mobile and use numerous resting sites per gonotrophic cycle, and (2) even greater contamination coverage of aquatic habitats results from accumulation of PPF from multiple oviposition events.

Methods and Findings

Deterministic mathematical models are described that use only field-measurable input parameters and capture the biological …

Homogenous Ensemble Phonotactic Language Recognition Based On Svm Supervector Reconstruction, Wei-Wei Liu, Wei-Qiang Zhang, Michael T. Johnson, Jia Liu

Electrical and Computer Engineering Faculty Research and Publications

Currently, acoustic spoken language recognition (SLR) and phonotactic SLR systems are widely used language recognition systems. To achieve better performance, researchers combine multiple subsystems with the results often much better than a single SLR system. Phonotactic SLR subsystems may vary in the acoustic features vectors or include multiple language-specific phone recognizers and different acoustic models. These methods achieve good performance but usually compute at high computational cost. In this paper, a new diversification for phonotactic language recognition systems is proposed using vector space models by support vector machine (SVM) supervector reconstruction (SSR). In this architecture, the subsystems share the same …

A Microfluidic Device For Thermal Particle Detection, Ashwin Kumar Vutha, Benyamin Davaji, Chung-Hoon Lee, Glenn M. Walker

Electrical and Computer Engineering Faculty Research and Publications

We demonstrate the use of heat to count microscopic particles. A thermal particle detector (TPD) was fabricated by combining a 500-nm-thick silicon nitride membrane containing a thin-film resistive temperature detector with a silicone elastomer microchannel. Particles with diameters of 90 and 200 μm created relative temperature changes of 0.11 and −0.44 K, respectively, as they flowed by the sensor. A first-order lumped thermal model was developed to predict the temperature changes. Multiple particles were counted in series to demonstrate the utility of the TPD as a particle counter.

A Microsoft Vba Application For Generating Heat Maps, Mark Polczynski, Michael Polczynski

Electrical and Computer Engineering Faculty Research and Publications

A choropleth map is a form of thematic map used to portray the structural characteristics of some particular geographical distribution not apparent in data presented in tabular form. Preparation of a choropleth map starts with the assignment of map features to classes based on the value of a specific feature attribute followed by the association of classes of features with appropriate map colors or symbols. Map features are often geographical regions with naturally or artificially defined boundaries, but choropleth maps can also be prepared by segmenting the area to be mapped into a regular grid of regions. Maps prepared with …

A Paper-Based Calorimetric Microfluidics Platform For Bio-Chemical Sensing, Benyamin Davaji, Chung Hoon Lee

Electrical and Computer Engineering Faculty Research and Publications

In this report, a paper-based micro-calorimetric biochemical detection method is presented. Calorimetric detection of biochemical reactions is demonstrated as an extension of current colorimetric and electrochemical detection mechanisms of paper-based biochemical analytical systems. Reaction and/or binding temperature of glucose/glucose oxidase, DNA/hydrogen peroxide, and biotin/streptavidin, are measured by the paper-based micro-calorimeter. Commercially available glucose calibration samples of 0.05, 0.15 and 0.3% wt/vol concentration are used for comparing the device performance with a commercially available glucose meter (electrochemical detection). The calorimetric glucose detection demonstrates a measurement error less than 2%. The calorimetric detection results of DNA concentrations from 0.9 to 7.3 mg/mL …

Applying Data Mining Tools To Archaeological "Big Data", Michael Polczynski, Mark Polczynski

Electrical and Computer Engineering Faculty Research and Publications

No abstract provided.

Application Of Information And Communication Technologies For Historical Research, Michael Polczynski, Mark Polczynski

Electrical and Computer Engineering Faculty Research and Publications

No abstract provided.

Generalized Approach Of Stator Shifting In Interior Permanent-Magnet Machines Equipped With Fractional-Slot Concentrated Windings, Patel B. Reddy, Kum-Kang Huh, Ayman M. El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

Electrical drive systems, which include electrical machines and power electronics, are a key enabling technology for advanced vehicle propulsion systems that reduce the petroleum dependence of the ground transportation sector. To have significant effect, electric drive technologies must be economical in terms of cost, weight, and size while meeting performance and reliability expectations. Interior permanent magnet machines with fractional-slot concentrated windings have been shown to be good candidates for hybrid traction applications. One of the key challenges is the additional stator magnetomotive force sub- and superharmonic components that lead to higher losses in the rotor as well as saturation effects. …

Multi-Objective Tradeoffs In The Design Optimization Of A Brushless Permanent-Magnet Machine With Fractional-Slot Concentrated Windings, Peng Zhang, Gennadi Y. Sizov, Muyang Li, Dan M. Ionel, Nabeel Demerdash, Steven J. Stretz, Alan W. Yeadon

Electrical and Computer Engineering Faculty Research and Publications

In this paper, a robust parametric model of a brushless permanent magnet machine with fractional-slot concentrated windings, which was developed for automated design optimization is presented. A computationally efficient finite-element analysis method was employed to estimate the dq-axes inductances, the induced voltage and torque ripple waveforms, and losses of the machine. A method for minimum effort calculation of the torque angle corresponding to the maximum torque per ampere load condition was developed. A differential evolution algorithm was implemented for the global design optimization with two concurrent objectives of minimum losses and minimum material cost. An engineering decision process based on …

Comparative Assessment Of Diverse Strategies For Malaria Vector Population Control Based On Measured Rates At Which Mosquitoes Utilize Targeted Resource Subsets, Gerry F. Killeen, Samson Sifael Kiware, Aklilu Seyoum, John E. Gimnig, George Corliss, Jennifer Stevenson, Christopher J. Drakeley, Nakul Chitnis

Electrical and Computer Engineering Faculty Research and Publications

Background

Eliminating malaria requires vector control interventions that dramatically reduce adult mosquito population densities and survival rates. Indoor applications of insecticidal nets and sprays are effective against an important minority of mosquito species that rely heavily upon human blood and habitations for survival. However, complementary approaches are needed to tackle a broader diversity of less human-specialized vectors by killing them at other resource targets.

Methods

Impacts of strategies that target insecticides to humans or animals can be rationalized in terms of biological coverage of blood resources, quantified as proportional coverage of all blood resources mosquito vectors utilize. Here, this concept …

Deterministic And Stochastic Resilience Analysis Of Minimum-Time-Controlled Discrete-Time Systems, Jennifer L. Bonniwell, Susan C. Schneider Phd, Edwin E. Yaz

Electrical and Computer Engineering Faculty Research and Publications

The resilience of discrete-time systems subject to minimum-time control is analysed for both deterministic and stochastic control gain perturbations. Lyapunov analysis is used to determine a tight upper bound on the control gain perturbations to maintain asymptotic stability.

Stochastic Analysis Of Cascading-Failure Dynamics In Power Grids, Mahshid Rahnamay-Naeini, Zhuoyao Wang, Nasir Ghani, Andrea Mammoli, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

A scalable and analytically tractable probabilistic model for the cascading failure dynamics in power grids is constructed while retaining key physical attributes and operating characteristics of the power grid. The approach is based upon extracting a reduced abstraction of large-scale power grids using a small number of aggregate state variables while modeling the system dynamics using a continuous-time Markov chain. The aggregate state variables represent critical power-grid attributes, which have been shown, from prior simulation-based and historical-data-based analysis, to strongly influence the cascading behavior. The transition rates among states are formulated in terms of certain parameters that capture grid's operating …

Terahertz Photoacoustic Spectroscopy Using An Mems Cantilever Sensor, Nathan E. Giauvitz, Ronald A. Coutu Jr., Ivan R. Medvedev, Douglas T. Petkie

Electrical and Computer Engineering Faculty Research and Publications

In this paper, a microelectromechanical systems cantilever sensor was designed, modeled, and fabricated to measure the photoacoustic (PA) response of gases under very low vacuum conditions. The micromachined devices were fabricated using silicon-on-insulator wafers and then tested in a custom-built, miniature, vacuum chamber during this first-ever demonstration. Terahertz radiation was amplitude modulated to excite the gas under test and perform PA molecular spectroscopy. Experimental data show a predominantly linear response that directly correlates measured cantilever deflection to PA signals. Excellent low pressure (i.e., 2-40 mTorr) methyl cyanide PA spectral data were collected resulting in a system sensitivity of 1.97 × …

Reduction Of Vibration-Induced Artifacts In Synthetic Aperture Radar Imagery, Qi Wang, Matthew Pepin, Aleck Wright, Ralf Dunkel, Tom Atwood, Balu Santhanam, Walter Gerstle, Armin W. Doerry, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

Target vibrations introduce nonstationary phase modulation, which is termed the micro-Doppler effect, into returned synthetic aperture radar (SAR) signals. This causes artifacts, or ghost targets, which appear near vibrating targets in reconstructed SAR images. Recently, a vibration estimation method based on the discrete fractional Fourier transform (DFrFT) has been developed. This method is capable of estimating the instantaneous vibration accelerations and vibration frequencies. In this paper, a deghosting method for vibrating targets in SAR images is proposed. For single-component vibrations, this method first exploits the estimation results provided by the DFrFT-based vibration estimation method to reconstruct the instantaneous vibration displacements. …

Electrical Machine Topologies: Hottest Topics In The Electrical Machine Research Community, Aldo Boglietti, Ayman M. El-Refaie, Oliver Drubel, Avoki M. Omekanda, Nicola Bianchi, Emmanuel B. Agamloh, Mircea Popescu, Antonino Di Gerlando, James Borg Bartolo

Electrical and Computer Engineering Faculty Research and Publications

In this article, the state of the art in electrical machine design is outlined underlining the problems and challenges to be solved by engineers. As highlighted in this article, even if electrical machine design is often considered a mature issue from the technical and technological point of view, every year, new progresses and steps forward are made. New and more sophisticated design tools can be used worldwide, and innovative manufacturing processes, new insulation materials, and higher performance magnetic materials are available on the market. In addition, the evolution of the hardware used in digital control and new powerful power electronic …