Computer Engineering Commons^™

Qtsac: An Energy-Efficient Mac Protocol For Delay Minimization In Wireless Sensor Networks, Yuxin Liu, Kaoru Ota, Kuan Zhang, Ming Ma, Naixue Xiong, Anfeng Liu, Jun Long

Department of Electrical and Computer Engineering: Faculty Publications

Millions of sensors are deployed to monitor the smart grid. They consume huge amounts of energy in the communication infrastructure. Therefore, the establishment of an energy-efficient medium access control (MAC) protocol for sensor nodes is challenging and urgently needed. The Quorum-based MAC protocol independently and adaptively schedules nodes’ wake-up times and decreases idle listening and collisions, thereby increasing the network throughput and extending the network lifetime. A novel Quorum time slot adaptive condensing (QTSAC)-based MAC protocol is proposed for achieving delay minimization and energy efficiency for the wireless sensor networks (WSNs). Compared to previous protocols, the QTSAC-based MAC protocol has …

Electron Effective Mass In In0.33ga0.67n Determined By Mid- Infrared Optical Hall Effect, Nerijus Armakavicius, Vallery Stanishev, Sean Knight, Mathias Schubert, Vanya Darakchieva

Department of Electrical and Computer Engineering: Faculty Publications

Mid-infrared optical Hall effect measurements are used to determine the free charge carrier parameters of an unintentionally doped wurtzite-structure c-plane oriented In_0.33Ga_0.67N epitaxial layer. Room temperature electron effective mass parameters of m_ ¼ ð0:20560:013Þm0 andm_k ¼ ð0:20460:016Þm0 for polarization perpendicular and parallel to the c-axis, respectively,were determined. The free electron concentration was obtained as (1.760.2)_1019 cm^-3. Within our uncertainty limits, we detect no anisotropy for the electron effective mass parameter and we estimate the upper limit of the possible effective mass anisotropy as 7%. We discuss the influence of conduction band nonparabolicity on …

Condensation And Subsequent Freezing Delays As A Result Of Using Femtosecond Laser Functionalized Surfaces, Chongji Huang, Ryan Bell, Alfred Tsubaki, Craig Zuhlke, Dennis Alexander

Department of Electrical and Computer Engineering: Faculty Publications

In this paper, the authors report on the use of femtosecond laser surface processing (FLSP) to enhance the anti-icing properties of a commonly used aircraft alloy, Al 7075-O Clad. By changing the surface morphology through FLSP and the surface chemistry through siloxane vapor deposition, the wettability of Al 7075-O Clad was altered. Tall mound and short mound FLSP functionalized surfaces were created through two sets of laser parameters. Condensation and the subsequent freezing of condensates on FLSP Al 7075-O Clad was studied. Both structure height and surface wettability were shown to play a role in the delay of freezing. Freezing …

Internet Of Underground Things: Sensing And Communications On The Field For Precision Agriculture, Mehmet C. Vuran, Abdul Salam, Rigoberto Wong, Suat Irmak

School of Computing: Conference and Workshop Papers

The projected increases in World population and need for food have recently motivated adoption of information technology solutions in crop fields within precision agriculture approaches. Internet of underground things (IOUT), which consists of sensors and communication devices, partly or completely buried underground for real-time soil sensing and monitoring, emerge from this need. This new paradigm facilitates seamless integration of underground sensors, machinery, and irrigation systems with the complex social network of growers, agronomists, crop consultants, and advisors. In this paper, state-of-the-art communication architectures are reviewed, and underlying sensing technology and communication mechanisms for IOUT are presented. Recent advances in the …

Scheduling In Mapreduce Clusters, Chen He

School of Computing: Dissertations, Theses, and Student Research

MapReduce is a framework proposed by Google for processing huge amounts of data in a distributed environment. The simplicity of the programming model and the fault-tolerance feature of the framework make it very popular in Big Data processing.

As MapReduce clusters get popular, their scheduling becomes increasingly important. On one hand, many MapReduce applications have high performance requirements, for example, on response time and/or throughput. On the other hand, with the increasing size of MapReduce clusters, the energy-efficient scheduling of MapReduce clusters becomes inevitable. These scheduling challenges, however, have not been systematically studied.

The objective of this dissertation is to …

Electron Effective Mass In Sn-Doped Monoclinic Single Crystal B-Gallium Oxide Determined By Mid-Infrared Optical Hall Effect, Sean Knight, Alyssa Mock, Rafal Korlacki, Vanya Darakchieva, Bo Monemar, Yoshinao Kumagai, Ken Goto, Masataka Higashiwaki, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

The isotropic average conduction band minimum electron effective mass in Sn-doped monoclinic single crystal B-Ga₂O₃ is experimentally determined by the mid-infrared optical Hall effect to be (0.28460.013)m₀ combining investigations on (010) and (_201) surface cuts. This result falls within the broad range of values predicted by theoretical calculations for undoped B-Ga₂O₃. The result is also comparable to recent density functional calculations using the Gaussian-attenuation- Perdew-Burke-Ernzerhof hybrid density functional, which predict an average effective mass of 0.267m₀. Within our uncertainty limits, we detect no anisotropy for the electron effective mass, which …

Vehicle-To-Barrier Communication During Real-World Vehicle Crash Tests, Samil Temel, Mehmet C. Vuran, Mohammad M.R. Lunar, Zhongyuan Zhao, Abdul Salam, Ronald K. Faller, Cody S. Stolle

School of Computing: Faculty Publications

Vehicle-to-barrier (V2B) communication is expected to facilitate wireless interactions between vehicles and roadside barriers in next-generation intelligent transportation systems. V2B systems will help mitigate single-vehicle, run-off-road crashes, which account for more than 50% of roadside crash fatalities. In this work, the characteristics of the wireless channel prior to and during a crash are analyzed using orthogonal frequency division multiplexing (OFDM) techniques, which has been used in existing vehicular communication systems. More specifically, the performance of OFDM-based V2B links are measured in real-world crash tests for the first time. Three crash tests conducted at the Midwest Roadside Safety Facility, Lincoln, Nebraska, …

Uneven-Layered Coding Metamaterial Tile For Ultrawideband Rcs Reduction And Diffuse Scattering, Jianxun Su, Huan He, Zengrui Li, Yaoqing Lamar Yang, Hongcheng Yin, Junhong Wang

Department of Electrical and Computer Engineering: Faculty Publications

In this paper, a novel uneven-layered coding metamaterial tile is proposed for ultra-wideband radar cross section (RCS) reduction and diffuse scattering. The metamaterial tile is composed of two kinds of square ring unit cells with different layer thickness. The reflection phase difference of 180° (±37°) between two unit cells covers an ultra-wide frequency range. Due to the phase cancellation between two unit cells, the metamaterial tile has the scattering pattern of four strong lobes deviating from normal direction. The metamaterial tile and its 90-degree rotation can be encoded as the ‘0’ and ‘1’ elements to cover an object, and diffuse …

Ultraviolet Laser Photolysis Of Hydrocarbons For Nondiamond Carbon Suppression In Chemical Vapor Deposition Of Diamond Films, Li-Sha Fan, Loic Constantin, Da-Wei Li, Lei Liu, Kamran Keramatnejad, Clio Azina, Xi Huang, Hossein Rabiee Golgir, Yao Lu, Zahra Ahmadi, Fei Wang, Jeffrey E. Shield, Bai Cui, Jean-Francois Silvain, Yong-Feng Lu

Department of Electrical and Computer Engineering: Faculty Publications

In this work, we demonstrate that ultraviolet (UV) laser photolysis of hydrocarbon species alters the flame chemistry such that it promotes the diamond growth rate and film quality. Optical emission spectroscopy and laser-induced fluorescence demonstrate that direct UV laser irradiation of a diamond-forming combustion flame produces a large amount of reactive species that play critical roles in diamond growth, thereby leading to enhanced diamond growth. The diamond growth rate is more than doubled, and diamond quality is improved by 4.2%. Investigation of the diamond nucleation process suggests that the diamond nucleation time is significantly shortened and nondiamond carbon accumulation is …

Optimal Computational Power Allocation In Multi-Access Mobile Edge Computing For Blockchain, Yuan Wu, Xiangxu Chen, Jiajun Shi, Kejie Ni, Liping Qian, Liang Huang, Kuan Zhang

Department of Electrical and Computer Engineering: Faculty Publications

Blockchain has emerged as a decentralized and trustable ledger for recording and storing digital transactions. The mining process of Blockchain, however, incurs a heavy computational workload for miners to solve the proof-of-work puzzle (i.e., a series of the hashing computation), which is prohibitive from the perspective of the mobile terminals (MTs). The advanced multi-access mobile edge computing (MEC), which enables the MTs to offload part of the computational workloads (for solving the proof-of-work) to the nearby edge-servers (ESs), provides a promising approach to address this issue. By offloading the computational workloads via multi-access MEC, the MTs can effectively increase their …

Structure-Mediated Excitation Of Air Plasma And Silicon Plasma Expansion In Femtosecond Laser Pulses Ablation, Qingsong Wang, Lan Jiang, Jingya Sun, Changji Pan, Weina Han, Guoyan Wang, Feifei Wang, Kaihu Zhang, Ming Li, Yongfeng Lu

Department of Electrical and Computer Engineering: Faculty Publications

Femtosecond laser-induced surface structures upon multiple pulses irradiation are strongly correlated with the pulse number,which in turn significantly affects successive laser-material interactions. By recording the dynamics of femtosecond laser ablation of silicon using time-resolved shadowgraphy, here we present direct visualization of the excitation of air plasma induced by the reflected laser during the second pulse irradiation.The interaction of the air plasma and silicon plasma is found to enhance the shockwave expansion induced by silicon ablation in the longitudinal direction, showing anisotropic expansion dynamics in different directions. We further demonstrate the vanishing of air plasma as the pulse number increases because …

Deformation Behavior Of Foam Laser Targets Fabricated By Two-Photon Polymerization, Ying Liu, John H. Campbell, Ori Stein, Lijia Jiang, Jared Hund, Yongfeng Lu

Department of Electrical and Computer Engineering: Faculty Publications

Two-photon polymerization (2PP), which is a three-dimensional micro/nano-scale additive manufacturing process, is used to fabricate component for small custom experimental packages (“targets”) to support laser-driven, high-energy-density physics research. Of particular interest is the use of 2PP to deterministically print millimeter-scale, low-density, and low atomic number (CHO) polymer matrices (“foams”). Deformation during development and drying of the foam structures remains a challenge when using certain commercial acrylic photo-resins. Acrylic resins were chosen in order to meet the low atomic number requirement for the foam; that requirement precludes the use of low-shrinkage organic/inorganic hybrid resins. Here, we compare the use of acrylic …

Bias-Dependent Scanning Tunneling Microscopy Signature Of Bridging-Oxygen Vacancies On Rutile Tio2(110), Willie B. Maddox, Danda P. Acharya, G. Jeremy Leong, Peter Sutter, Cristian V. Ciobanu

Department of Electrical and Computer Engineering: Faculty Publications

The rutile TiO₂(110) surface has long-served as a wellcharacterized, prototypical transition-metal oxide surface used in heterogeneous catalysis and photocatalytic water splitting. Naturally occurring defects on this surface, called bridging-oxygen (BO) vacancies, are important as they determine the overall reactivity of the surface. Herein, we report a bias-dependent, scanning tunneling microscopy (STM) signature of the BO vacancies on TiO₂(110): for sample bias voltages past a threshold of +3 V, the bright vacancies are flanked on either side (along the oxygen row) by two dark spots approximately shaped like half-moons. The BO vacancies have a bright aspect below …

Experimental Analyses On Multiscale Structural And Mechanical Properties Of Ε-Si/Gesi/C-Si Materials, Wei Qiu, Lu-Lu Ma, Hong-Tao Wang, Ren-Rong Liang, Yu-Cheng Zhao, Yun-Shen Zhou

Department of Electrical and Computer Engineering: Faculty Publications

Strained silicon (ε-Si) is a promising material that could extend Moore’s law by enhancing electron mobility. A ε-Si material is usually composed of multiscale, multilayer heterostructures, where the strained-silicon film or strap is tens-of-nanometers thick, and its buffer layers are of the micrometer scale. The structural properties determine the electrical performance and reliability of ε-Si-based devices. Inhomogeneous residual stress is induced during the preparation, which induces ε-Si structure failure. In this work, biaxial strained-silicon films that contain graded and relaxed germanium-silicon buffer layers were prepared on monocrystalline silicon wafers through reduced-pressure chemical-vapor epitaxy. The layer components and thicknesses were measured …

Adaptive Transmission Range Based Topology Control Scheme For Fast And Reliable Data Collection, Haojun Teng, Kuan Zhang, Mianxiong Dong, Kaoru Ota, Anfeng Liu, Ming Zhao, Tian Wang

Department of Electrical and Computer Engineering: Faculty Publications

An Adaptive Transmission Range Based Topology Control (ATRTC) scheme is proposed to reduce delay and improve reliability for data collection in delay and loss sensitive wireless sensor network. The core idea of the ATRTC scheme is to extend the transmission range to speed up data collection and improve the reliability of data collection.The main innovations of our work are as follows: (1) an adaptive transmission range adjustment method is proposed to improve data collection reliability and reduce data collection delay. The expansion of the transmission range will allow the data packet to be received by more receivers, thus improving the …

Information Theory And Cognition: A Review, Khalid Sayood

Department of Electrical and Computer Engineering: Faculty Publications

We examine how information theory has been used to study cognition over the last seven decades. After an initial burst of activity in the 1950s, the backlash that followed stopped most work in this area. The last couple of decades has seen both a revival of interest, and a more firmly grounded, experimentally justified use of information theory. We can view cognition as the process of transforming perceptions into information—where we use information in the colloquial sense of the word. This last clarification is one of the problems we run into when trying to use information theoretic principles to understand …

Integrated Vacuum-Ultraviolet, Mid And Near-Ultraviolet, Visible, Near, Mid And Far Infrared And Terahertz Optical Hall Effect (Ohe) Instrument, And Method Of Use, Tino Hofmann, Mathias M. Schubert, Stefan Schoeche, Philipp Kuehne, Craig M. Herzinger, John A. Woollam, Gregory K. Pribil, Thomas E. Tiwald, Sean R. Knight

Department of Electrical and Computer Engineering: Faculty Publications

Optical Hall Effect (OHE) method for evaluating such as free charge carrier effective mass, concentration, mobility and free charge carrier type in a sample utilizing a permanent magnet at room temperature.

Fiber - Optic Temperature And Flow Sensor System And Methods, Ming Han, Guigen Liu, Weilin Hou

Department of Electrical and Computer Engineering: Faculty Publications

A fiber optic sensor, a process for utilizing a fiber optic sensor, and a process for fabricating a fiber optic sensor are described, where a double-side-polished silicon pillar is attached to an optical fiber tip and forms a Fabry-Perot cavity. In an implementation, a fiber optic sensor in accordance with an exemplary embodiment includes an optical fiber configured to be coupled to a light source and a spectrometer; and a single silicon layer or multiple silicon layers disposed on an end face of the optical fiber, where each of the silicon layer(s) defines a Fabry-Perot interferometer, and where the sensor …

Non-Vacuum Preparation Of Wse2 Thin Films Via The Selenization Of Hydrated Tungsten Oxide Prepared Using Chemical Solution Methods, Christopher L. Exstrom, Scott A. Darveau, Megan E. Falconer, Jessica R. Blum, Whitney M. Colling, Natale J. Ianno

Department of Electrical and Computer Engineering: Faculty Publications

It is known that tungsten oxide may be reacted with selenium sources to form WSe₂ but literature reports include processing steps that involve high temperatures, reducing atmospheres, and/or oxidative pre-treatments of tungsten oxide. In this work, we report a non-vacuum process for the fabrication of compositionally high quality WSe₂ thin films via the selenization of tungsten oxide under milder conditions. Tungsten source materials were various hydrated WO₃ and WO_2.9 compounds that were prepared using chemical solution techniques. Resulting films were selenized using a two-stage heating profile (250 °C for 15 minutes and 550 °C for 30 …

Non-Vacuum Preparation Of Wse2 Thin Films Via The Selenization Of Hydrated Tungsten Oxide Prepared Using Chemical Solution Methods, Christopher L. Exstrom, Scott A. Darveau, Megan E. Flaconer, Jessica R. Blum, Whitney M. Colling, Natale J. Ianno

Department of Electrical and Computer Engineering: Faculty Publications

It is known that tungsten oxide may be reacted with selenium sources to form WSe2 but literature reports include processing steps that involve high temperatures, reducing atmospheres, and/or oxidative pre-treatments of tungsten oxide. In this work, we report a non-vacuum process for the fabrication of compositionally high quality WSe2 thin films via the selenization of tungsten oxide under milder conditions. Tungsten source materials were various hydrated WO3 and WO2.9 compounds that were prepared using chemical solution techniques. Resulting films were selenized using a two-stage heating profile (250 oC for 15 minutes and 550 oC for 30 minutes) under a static …

Cyber Security And Risk Society: Estonian Discourse On Cyber Risk And Security Strategy, Lauren Kook

Copyright, Fair Use, Scholarly Communication, etc.

The main aim of this thesis is to call for a new analysis of cyber security which departs from the traditional security theory. I argue that the cyber domain is inherently different in nature, in that it is lacking in traditional boundaries and is reflexive in nature. Policy-makers are aware of these characteristics, and in turn this awareness changes the way that national cyber security strategy is handled and understood. These changes cannot be adequately understood through traditional understanding of security, as they often are, without missing significant details. Rather, examining these changes through the lens of Ulrich Beck’s risk …

Using Virtual Reality And Photogrammetry To Enrich 3d Object Identity, Cole Juckette, Heather Richards-Rissetto, Hector Eluid Guerra Aldana, Norman Martinez

Department of Anthropology: Faculty Publications

The creation of digital 3D models for cultural heritage is commonplace. With the advent of efficient and cost effective technologies archaeologists are making a plethora of digital assets. This paper evaluates the identity of 3D digital assets and explores how to enhance or expand that identity by integrating photogrammetric models into VR. We propose that when a digital object acquires spatial context from its virtual surroundings, it gains an identity in relation to that virtual space, the same way that embedding the object with metadata gives it a specific identity through its relationship to other information. We explore this concept …

The Rhetoric Of Science Education And Technology, Iwasan D. Kejawa

School of Computing: Faculty Publications

Nearly thousands of science experiments are performed both on humans and animals every year in the United States (Gregory, 1999). Does Science enormously play a role in the well-beings of individual in the society? Research has found that science education is through motivation and satisfying the needs of humans. The scientific world is part of an elongated human development. This can be substantiated with the use and evolution of TECHNOLOGY and SCIENCE (Minton, 2004). Education of the entities that comprise the need to achieve the goal of TECHNOLOGY and SCIENCE which are important issues of today. Research has shown that …

Crop Height Estimation With Unmanned Aerial Vehicles, Carrick Detweiler, David Anthony, Sebastian Elbaum

School of Computing: Faculty Publications

An unmanned aerial vehicle (UAV) can be configured for crop height estimation. In some examples, the UAV includes an aerial propulsion system, a laser scanner configured to face downwards while the UAV is in flight, and a control system. The laser scanner is configured to scan through a two-dimensional scan angle and is characterized by a maxi mum range. The control system causes the UAV to fly over an agricultural field and maintain, using the aerial propulsion system and the laser scanner, a distance between the UAV and a top of crops in the agricultural field to within a programmed …

Internet Of Underground Things In Precision Agriculture: Architecture And Technology Aspects, Mehmet C. Vuran, Abdul Salam, Rigoberto Wong, Suat Irmak

School of Computing: Faculty Publications

The projected increases in World population and need for food have recently motivated adoption of information technology solutions in crop fields within precision agriculture approaches. Internet Of Underground Things (IOUT), which consists of sensors and communication devices, partly or completely buried underground for real-time soil sensing and monitoring, emerge from this need. This new paradigm facilitates seamless integration of underground sensors, machinery, and irrigation systems with the complex social network of growers, agronomists, crop consultants, and advisors. In this paper, state-of-the-art communication architectures are reviewed, and underlying sensing technology and communication mechanisms for IOUT are presented. Moreover, recent advances in …

Electrons Dynamics Control By Shaping Femtosecond Laser Pulses In Micro/Nanofabrication: Modeling, Method, Measurement And Application, Lan Jiang, An-Dong Wang, Bo Li, Tian-Hong Cui, Yong-Feng Lu

Department of Electrical and Computer Engineering: Faculty Publications

During femtosecond laser fabrication, photons are mainly absorbed by electrons, and the subsequent energy transfer from electrons to ions is of picosecond order. Hence, lattice motion is negligible within the femtosecond pulse duration, whereas femtosecond photon-electron interactions dominate the entire fabrication process. Therefore, femtosecond laser fabrication must be improved by controlling localized transient electron dynamics, which poses a challenge for measuring and controlling at the electron level during fabrication processes. Pump-probe spectroscopy presents a viable solution, which can be used to observe electron dynamics during a chemical reaction. In fact, femtosecond pulse durations are shorter than many physical/chemical characteristic times, …

Ears-Dm: Efficient Auto Correction Retrieval Scheme For Data Management In Edge Computing, Kai Fan, Jie Yin, Kuan Zhang, Hui Li, Yintang Wang

Department of Electrical and Computer Engineering: Faculty Publications

Edge computing is an extension of cloud computing that enables messages to be acquired and processed at low cost. Many terminal devices are being deployed in the edge network to sense and deal with the massive data. By migrating part of the computing tasks from the original cloud computing model to the edge device, the message is running on computing resources close to the data source. The edge computing model can effectively reduce the pressure on the cloud computing center and lower the network bandwidth consumption. However, the security and privacy issues in edge computing are worth noting. In this …

Optimal Computational Power Allocation In Multi-Access Mobile Edge Computing For Blockchain, Yuan Wu, Xiangxu Chen, Jiajun Shi, Kejie Ni, Liping Qian, Liang Huang, Kuan Zhang

Department of Electrical and Computer Engineering: Faculty Publications

Blockchain has emerged as a decentralized and trustable ledger for recording and storing digital transactions. The mining process of Blockchain, however, incurs a heavy computational workload for miners to solve the proof-of-work puzzle (i.e., a series of the hashing computation), which is prohibitive from the perspective of the mobile terminals (MTs). The advanced multi-access mobile edge computing (MEC), which enables the MTs to offload part of the computational workloads (for solving the proof-of-work) to the nearby edge-servers (ESs), provides a promising approach to address this issue. By offloading the computational workloads via multi-access MEC, the MTs can effectively increase their …

Effect Of Weld Nugget Size On Failure Mode And Mechanical Properties Of Microscale Resistance Spot Welds On Ti–1al–1mn Ultrathin Foils, Feng Chen, Shiding Sun, Zhenwu Ma, G Q. Tong, Xiang Huang

Department of Electrical and Computer Engineering: Faculty Publications

We use tensile–shear tests to investigate the failure modes of Ti–1Al–1Mn microscale resistance spot welds and to determine how the failure mode affects the microstructure, microhardness profile, and mechanical performance. Two different failure modes were revealed: interfacial failure mode and pullout failure mode. The welds that fail by pullout failure mode have much better mechanical properties than those that fail by interfacial failure mode. The results show that weld nugget size is also a principal factor that determines the failure mode of microscale resistance spot welds. A minimum weld nugget size exists above which all specimens fail by pullout failure …

Metasurface Base On Uneven Layered Fractal Elements For Ultra-Wideband Rcs Reduction, Jianxun Su, Yueyang Cui, Zengrui Li, Yaoqing (Lamar) Yang, Yongxing Che, Hongcheng Yin

Department of Electrical and Computer Engineering: Faculty Publications

A novel metasurface based on uneven layered fractal elements is designed and fabricated for ultra-wideband radar cross section (RCS) reduction in this paper. The proposed metasurface consists of two fractal subwavelength elements with different layer thickness. The reflection phase difference of 180^◦ (±37^◦) between two unit cells covers an ultra-wide frequency range. Ultra-wideband RCS reduction results from the phase cancellation between two local waves produced by these two unit cells. The diffuse scattering of electromagnetic (EM) waves is caused by the randomized phase distribution, leading to a low monostatic and bistatic RCS simultaneously. This metasurface can achieve …