Computer Engineering Commons^™

Packmule, Jared M. Alexander, Jared J. Ford, Timothy J. Griffiths, Andray Pennington

Williams Honors College, Honors Research Projects

People face demands of hauling equipment and belongings with them every day, whether it be for work or leisure. This design report discusses and details a product that would allow people to overcome the struggles of this. The Packmule is an autonomous following robot that has the capability of carrying a load up to 30 pounds. The design involves two independently controlled motors operating two drive wheels so that the Packmule will be flexible in the directions it can move. There are also two more steering wheels for support of the base and the load inside. The way in which …

Intelligent Ground Vehicle Competition, Austin R. Tyler, Chris R. Estock, Johnathan P. Johenning, Garrett W. Chonko, Allen C. Gilleland

Williams Honors College, Honors Research Projects

The Intelligent Ground Vehicle Competition (IGVC) draws teams from various universities to compete in the annual autonomous vehicle challenge at the Oakland University campus. To compete, a vehicle must be fully autonomous and can navigate a course designated by various obstacles and painted white lines. Some design challenges are motor control, navigation, environment sensing and safety. A complex navigation system will utilize several tools including a high-precision differential GPS. The vehicle’s surroundings will be mapped using a combination of Light Detection and Ranging (LiDAR) and computer-vision enabled imaging. To comply with IGVC rules, the vehicle must also follow several safety …

System Identification Of A Circulation Control Unmanned Aerial Vehicle, Mohammed Agha

Electronic Theses and Dissertations

The advancement in automation and sensory systems in recent years has led to an increase the demand of UAV missions. Due to this increase in demand, the research community has gained interest in investigating UAV performance enhancing systems. Circulation Control (CC), which is an active control flow method used to enhance UAV lift, is a performance enhancing system currently studied. In prior research, experimental studies have shown that Circulation Control wings (CCW) implemented on class-I UAVs can reduce take-off distance by 54%. Wind tunnel tests reveal that CC improves aircraft payload capabilities through lift enhancement. Increasing aircraft payload capabilities causes …

Heterogeneous Multi-Sensor Fusion For 2d And 3d Pose Estimation, Hanieh Deilamsalehy

Dissertations, Master's Theses and Master's Reports

Sensor fusion is a process in which data from different sensors is combined to acquire an output that cannot be obtained from individual sensors. This dissertation first considers a 2D image level real world problem from rail industry and proposes a novel solution using sensor fusion, then proceeds further to the more complicated 3D problem of multi sensor fusion for UAV pose estimation.

One of the most important safety-related tasks in the rail industry is an early detection of defective rolling stock components. Railway wheels and wheel bearings are two components prone to damage due to their interactions with the …

Using Lower Extremity Muscle Activations To Estimate Human Ankle Impedance In The External-Internal Direction, Lauren N. Knop

Dissertations, Master's Theses and Master's Reports

For millions of people, mobility has been afflicted by lower limb amputation. Lower extremity prostheses have been used to improve the mobility of an amputee; however, they often require additional compensation from other joints and do not allow for natural maneuverability. To improve upon the functionality of ankle-foot prostheses, it is necessary to understand the role of different muscle activations in the modulation of mechanical impedance of a healthy human ankle. This report presents the results of using artificial neural networks (ANN) to determine the functional relationship between lower extremity electromyography (EMG) signals and ankle impedance in the transverse plane. …

Hands-On Learning Environment And Educational Curriculum On Collaborative Robotics, Ana Djuric, Jeremy L. Rickli, Vukica M. Jovanovic, Daniel Foster

Engineering Technology Faculty Publications

The objective of this paper is to describe teaching modules developed at Wayne State University integrate collaborative robots into existing industrial automation curricula. This is in alignment with Oakland Community College and WSU’s desire to create the first industry-relevant learning program for the use of emerging collaborative robotics technology in advanced manufacturing systems. The various learning program components will prepare a career-ready workforce, train industry professionals, and educate academicians on new technologies. Preparing future engineers to work in highly automated production, requires proper education and training in CoBot theory and applications. Engineering and Engineering Technology at Wayne State University offer …

2d Vector Map And Database Design For Indoor Assisted Navigation, Luciano Caraciolo Albuquerque

Dissertations and Theses

In this paper we implemented a 2D Vector Map, map editor and Database design intended to provide an efficient way to convert cad files from indoor environments to a set of vectors representing hallways, doors, exits, elevators, and other entities embedded in a floor plan, and save them in a database for use by other applications, such as assisted navigation for blind people.

A graphical application as developed in C++ to allow the user to input a CAD DXF file, process the file to automatically obtain nodes and edges, and save the nodes and edges to a database for posterior …

Evaluating Intention To Use Remote Robotics Experimentation In Programming Courses, Pericles Leng Cheng

Walden Dissertations and Doctoral Studies

The Digital Agenda for Europe (2015) states that there will be 825,000 unfilled vacancies for Information and Communications Technology by 2020. This lack of IT professionals stems from the small number of students graduating in computer science. To retain more students in the field, teachers can use remote robotic experiments to explain difficult concepts. This correlational study used the unified theory of acceptance and use of technology (UTAUT) to examine if performance expectancy, effort expectancy, social influence, and facilitating conditions can predict the intention of high school computer science teachers in Cyprus, to use remote robotic experiments in their classes. …

Omni-Directional Infrared 3d Reconstruction And Tracking Of Human Targets, Emrah Benli

Theses and Dissertations

Omni-directional (O-D) infrared (IR) vision is an effective capability for mobile systems in robotics, due to its advantages: illumination invariance, wide field-of-view, ease of identifying heat-emitting objects, and long term tracking without interruption. Unfortunately, O-D IR sensors have low resolution, low frame rates, high cost, sensor noise, and an increase in tracking time. In order to overcome these disadvantages, we propose an autonomous system application in indoor scenarios including 1) Dynamic 3D Reconstruction (D3DR) of the target view in real time images, 2) Human Behavior-based Target Tracking from O-D thermal images, 3) Thermal Multisensor Fusion (TMF), and 4) Visual Perception …

A Hierarchical Architectural Framework For Securing Unmanned Aerial Systems, Matthew Leccadito

Theses and Dissertations

Unmanned Aerial Systems (UAS) are becoming more widely used in the new era of evolving technology; increasing performance while decreasing size, weight, and cost. A UAS equipped with a Flight Control System (FCS) that can be used to fly semi- or fully-autonomous is a prime example of a Cyber Physical and Safety Critical system. Current Cyber-Physical defenses against malicious attacks are structured around security standards for best practices involving the development of protocols and the digital software implementation. Thus far, few attempts have been made to embed security into the architecture of the system considering security as a holistic problem. …

Single Propeller Drone (Singrone): Inovasi Rancang Bangun Drone Single Propeller Sebagai Wahana Pemetaan Lahan Berbasis Unmaned Aerial Vehicle (Uav), Mohammad Giffari Anta Pradana

Elinvo (Electronics, Informatics, and Vocational Education)

Dewasa ini, teknologi sebagai faktor memberikan kontribusi yang signifikan dalam peningkatan
kualitas hidup manusia. Salah satu teknologi yang berkembang saat ini adalah drone. Drone adalah
pesawat tanpa awak yang dikendalikan dengan sebuah remote control , di lengkapi dengan GPS sebagai
navigasi, dan lock position. Pada umumnya drone digunakan untuk berbagai hal, seperti pemantauan lalu
lintas, pemetaan lahan, investigasi dan sebagainya. Namun penggunaan drone dengan menggunakan
banyak propeller merupakan salah satu masalah penggunaan drone. Semakin banyak propeller yang
digunakan, maka masa hidup drone di udara juga akan semakin berkurang. Hal ini diarenakan baterai
yang digunakan oleh wahana tersebut banyak digunakan untuk …

Robostock: Autonomous Inventory Tracking, Drew Christian Balthazor

Computer Engineering

No abstract provided.

Android Drone: Remote Quadcopter Control With A Phone, Aubrey John Russell

Computer Engineering

The purpose of the “Android Drone” project was to create a quadcopter that can be controlled by user input sent over the phone’s Wi-Fi connection or 4G internet connection. Furthermore, the purpose was also to be able to receive live video feedback over the internet connection, thus making the drone an inexpensive option compared to other, equivalent drones that might cost thousands of dollars. Not only that, but the Android phone also has a host of other useful features that could be utilized by the drone: this includes GPS, pathing, picture taking, data storage, networking and TCP/IP, a Java software …

Autonomous Golf Cart Firmware, Gerik Kubiak

Computer Engineering

The Autonomous Golf Cart Project is a project sponsored by the Cal Poly Robotics Club. The multidisciplinary team is adding sensors and electronics to a regular golf cart with the goal to drive the golf cart around campus without and human input. This task requires a plethora of hardware and firmware to control that hardware. The firmware provides an interface for higher level software to then control the hardware and therefore drive the golf cart. This report is focused on the hardware modifications and the firmware used in order to drive the golf cart from a computer.

Electronic Deer Warning System, David Zhuo, Anlang Lu

Computer Engineering

Deer-vehicle collisions (DVCs) are extremely dangerous, often injuring or even killing drivers. Unfortunately, this form of automotive accident is commonplace in the United States. According to the NHTSA, DVCs result in 200 human deaths a year.2

Despite these deadly incidents, there currently are no deployed federal or state systems for preventing DVCs. There are many consumer electronic deer deterrent products, but their long-term effectiveness is questionable.3 In fact, there does not appear to be much research into electronic deer deterrent systems. Aside from constant audio output and electric shock, no other means of electronic deterrent exist. Even if fixed deterrents …

Liquid Metal Particle Popping: Nanoscale To Macroscale, Trevor R. Lear

Open Access Theses

Liquid metal nanoparticles can be used to produce stretchable electronic devices. Understanding the mechanical properties of liquid metal nanoparticles is crucial to optimizing their use in various applications, especially printing of flexible, stretchable electronics. Smaller nanoparticles are desired for high-resolution printing and compatibility with existing scalable manufacturing methods; however, they contain less liquid metal and are more difficult to rupture than larger particles, making them less desirable for post-processing functionality. This study investigates the mechanics of liquid metal particle rupture as a function of particle size. We employ compression of particle films to characterize the composition of the particle core …

Psychophysiological Analysis Of A Pedagogical Agent And Robotic Peer For Individuals With Autism Spectrum Disorders., Mohammad Nasser Saadatzi

Electronic Theses and Dissertations

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by ongoing problems in social interaction and communication, and engagement in repetitive behaviors. According to Centers for Disease Control and Prevention, an estimated 1 in 68 children in the United States has ASD. Mounting evidence shows that many of these individuals display an interest in social interaction with computers and robots and, in general, feel comfortable spending time in such environments. It is known that the subtlety and unpredictability of people’s social behavior are intimidating and confusing for many individuals with ASD. Computerized learning environments and robots, however, prepare a predictable, …

Design Of A Flexible Control Platform And Miniature In Vivo Robots For Laparo-Endoscopic Single-Site Surgeries, Lou P. Cubrich

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Minimally-invasive laparoscopic procedures have proven efficacy for a wide range of surgical procedures as well as benefits such as reducing scarring, infection, recovery time, and post-operative pain. While the procedures have many advantages, there are significant shortcomings such as limited instrument motion and reduced dexterity. In recent years, robotic surgical technology has overcome some of these limitations and has become an effective tool for many types of surgeries. These robotic platforms typically have an increased workspace, greater dexterity, improved ergonomics, and finer control than traditional laparoscopic methods. This thesis presents the designs of both a four degree-of-freedom (DOF) and 5-DOF …

Mesh Addition Based On The Depth Image (Mabdi), Lucas E. Chavez

Mechanical Engineering ETDs

Many robotic applications utilize a detailed map of the world and the algorithm used to produce such a map must take into consideration real-world constraints such as computational and memory costs. Traditional mesh-based environmental mapping algorithms receive data from the sensor, create a mesh surface from the data, and then append the surface to a growing global mesh. These algorithms do not provide a computationally efficient mechanism for reducing redundancies in the global mesh. MABDI is able to leverage the knowledge contained in the global mesh to find the difference between what we expect our sensor to see and what …

Formal Performance Guarantees For Behavior-Based Localization Missions, Damian Lyons, Ron Arkin, Shu Jiang, Matt O'Brien, Feng Tang, Peng Tang

Faculty Publications

Abstract— Localization and mapping algorithms can allow a robot to navigate well in an unknown environment. However, whether such algorithms enhance any specific robot mission is currently a matter for empirical validation. In this paper we apply our MissionLab/VIPARS mission design and verification approach to an autonomous robot mission that uses probabilistic localization software.

Two approaches to modeling probabilistic localization for verification are presented: a high-level approach, and a sample-based approach which allows run-time code to be embedded in verification. Verification and experimental validation results are presented for two different missions, each using each method, demonstrating the accuracy …

Studying The Effects Of Serpentine Soil On Adapted And Non-Adapted Species Using Arduino Technology, Kiana Saniee, Edward Himelblau, Brian Paavo

STAR Program Research Presentations

Abstract: Serpentine soils are formed from ultramafic rocks and are represent an extreme environment for plants. Serpentine soils are unique in that they carry high concentrations of heavy metals, are nutrient deficient, particularly in calcium, and have poor water retention capabilities. Although these soils constitute harsh conditions for plant growth, there are a number of species that are adapted and even endemic to serpentine soil. Water retention by commercial potting mix was compared with serpentine soil. Also, serpentine adapted and non-adapted species were grown in both soil treatments and physiological data were collected. We used the Arduino electronic platform to …

Data Fusion For Vision-Based Robotic Platform Navigation, Andrés F. Echeverri

Master's Theses (2009 -)

Data fusion has become an active research topic in recent years. Growing computational performance has allowed the use of redundant sensors to measure a single phenomenon. While Bayesian fusion approaches are common in general applications, the computer vision community has largely relegated this approach. Most object following algorithms have gone towards pure machine learning fusion techniques that tend to lack flexibility. Consequently, a more general data fusion scheme is needed. The motivation for this work is to propose methods that allow for the development of simple and cost effective, yet robust visual following robots capable of tracking a general object …

Landmark Detection With Surprise Saliency Using Convolutional Neural Networks, Feng Tang, Damian Lyons, Daniel Leeds

Faculty Publications

Abstract—Landmarks can be used as reference to enable people or robots to localize themselves or to navigate in their environment. Automatic definition and extraction of appropriate landmarks from the environment has proven to be a challenging task when pre-defined landmarks are not present. We propose a novel computational model of automatic landmark detection from a single image without any pre-defined landmark database. The hypothesis is that if an object looks abnormal due to its atypical scene context (what we call surprise saliency), it then may be considered as a good landmark because it is unique and easy to spot by …

Mechanical Design And Optimization Of An Interactive Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Animatronics is a specialized sub-category of mechatronics, a fusion of mechanical and electrical engineering. The field has grown from small, individual projects into a major industry. As animatronics progress, mechanical engineers are pushed to design internal structures which occupy ever-decreasing spaces and to ensure designs can undergo maintenance and modifications smoothly. This research investigates methods of reducing space required for mechanisms and several other beneficial methods of development as well as varying satisfactions for audiences when exposed to actor-controlled systems rather than pre-scripted functions. The mechanical systems are designed using CAD software available at Georgia Southern. On-campus, resources are used …

Analysis Of Feedback Control Applied With Command Shaping To Minimize Residual Vibration, Nicholas L. Jacobs

Open Access Theses

Joint flexibility is a physical trait that affects all robotic systems to some degree. This characteristic has been shown to be very detrimental to the performance of these robotic systems when implementing fast point-to-point motion. During such motion, the robot will induce vibrations in its structure that will extend past the completion of the move. Many techniques have been applied over the years in order to minimize these residual vibrations. One such method is known as command shaping, which will construct the input profile so as to avoid exciting the natural frequencies of the system. This work seeks to extend …

Command Shaping With Constrained Peak Input Acceleration To Minimize Residual Vibration In A Flexible-Joint Robot, Yumeng Wu

Open Access Theses

Rapid point-to-point motion is limited when flexibilities exist in the system. In order to minimize the vibrations related to joint flexibilities, much work has been done, including modifying the system so that vibrations can be damped out more quickly, calculating the inverse dynamics of the system and constructing shaped input profiles that avoid system natural frequencies. In this work, the earlier fixed-time command shaping method has been extended to a peak-acceleration-constrained approach with two basis functions, the ramped sinusoid function and the versine function, such that the maximum acceleration is guaranteed without overconstraining the input profiles. The approach is developed …

Algorithms For Lidar Based Traffic Tracking: Development And Demonstration, Vamsi K. Bandaru

Open Access Theses

The current state of the art of traffic tracking is based on the use of video, and requires extensive manual intervention for it to work, including hours of painstaking human examination of videos frame by frame which also make the acquisition of data extremely expensive. Fundamentally, this is because we do not have observability of the actual scene from a camera which captures a 2D projection of the 3D world. Even if video were to be automated, it would involve such algorithms as RANSACK for outlier elimination while matching features across frames or across multiple cameras. This results in algorithms …

Vision-Based Motion For A Humanoid Robot, Khalid Abdullah Alkhulayfi

Dissertations and Theses

The overall objective of this thesis is to build an integrated, inexpensive, human-sized humanoid robot from scratch that looks and behaves like a human. More specifically, my goal is to build an android robot called Marie Curie robot that can act like a human actor in the Portland Cyber Theater in the play Quantum Debate with a known script of every robot behavior. In order to achieve this goal, the humanoid robot need to has degrees of freedom (DOF) similar to human DOFs. Each part of the Curie robot was built to achieve the goal of building a complete humanoid …

Pythagorean Combinations For Lego Robot Building., Ronald I. Greenberg

Computer Science: Faculty Publications and Other Works

This paper provides tips for LEGO robot construction involving bracing or gear meshing along a diagonal using standard Botball kits.

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …