Computer Engineering Commons^™

Deep Sea Underwater Robotic Exploration In The Ice-Covered Arctic Ocean With Auvs, Clayton Kunz, Chris Murphy, Richard Camilli, Hanumant Singh, John Bailey, Ryan M. Eustice, Chris Roman, Michael Jakuba, Claire Willis, Taichi Sato, Ko-Ichi Nakamura, Robert A. Sohn

Graduate School of Oceanography Faculty Publications

The Arctic seafloor remains one of the last unexplored areas on Earth. Exploration of this unique environment using standard remotely operated oceanographic tools has been obstructed by the dense Arctic ice cover. In the summer of 2007 the Arctic Gakkel Vents Expedition (AGAVE) was conducted with the express intention of understanding aspects of the marine biology, chemistry and geology associated with hydrothermal venting on the section of the mid-ocean ridge known as the Gakkel Ridge. Unlike previous research expeditions to the Arctic the focus was on high resolution imaging and sampling of the deep seafloor. To accomplish our goals we …

Analysis And Experiments For Tendril-Type Robots, Lara Cowan

All Theses

New models for the Tendril continuous backbone robot, and other similarly constructed robots, are introduced and expanded upon in this thesis. The ability of the application of geometric models to result in more precise control of the Tendril manipulator is evaluated on a Tendril prototype. We examine key issues underlying the design and operation of 'soft' robots featuring continuous body ('continuum') elements. Inspiration from nature is used to develop new methods of operation for continuum robots. These new methods of operation are tested in experiments to evaluate their effectiveness and potential.

Comparing Discrimination And Cfa For Selecting Tracking Features, Damian M. Lyons, D. Frank Hsu

Faculty Publications

The ability of a tracker to isolate the foreground target from the background of an image is crucially dependent on the set of features selected for tracking. Collins & Liu [2] propose an on-line, adaptive approach to selecting the set of features based on the insight that the set of features that best discriminate between target and background classes is the best set to use for tracking. In previous work [10], we have proposed an approach based on Combinatorial Fusion Analysis for selecting features for Real-Time tracking. We discuss the relative merits of the two methods and motivate their combination …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Byzantium Beneath The Black Sea, Bridget Buxton, Robert Ballard, Michael Brennan, Dwight Coleman, Katy Croff, Christopher Roman, Dan Davis, Dennis Piechota, Sergiy Voronov

Graduate School of Oceanography Faculty Publications

This poster reports on the August 2007 Black Sea Expedition of the Institute for Archaeological Oceanography at the University of Rhode Island (IAO) and the Institute for Exploration (IFE), in collaboration with the Department of the Underwater Heritage of Ukraine. This year’s work marks a new phase in a multi-year (2000–2012) archaeological and oceanographic survey of the Black Sea. 2007 fieldwork focuses on two Byzantine shipwrecks. The 10th century C.E. shipwreck Chersonesos A (discovered in 2006) lies at 140 m depth in the suboxic zone off the Crimean peninsula. The ship carried a cargo of one-handled jars of a widely …

Odometry Correction Of A Mobile Robot Using A Range-Finding Laser, Thomas Epton

All Theses

Two methods for improving odometry using a pan-tilt range-finding laser is considered. The first method is a one-dimensional model that uses the laser with a sliding platform. The laser is used to determine how far the platform has moved along a rail. The second method is a two-dimensional model that mounts the laser to a mobile robot. In this model, the laser is used to improve the odometry of the robot. Our results show that the one-dimensional model proves our basic geometry is correct, while the two-dimensional model improves the odometry, but does not completely correct it.

Operational Strategies For Continuum Manipulators, Matt Csencsits

All Theses

We introduce a novel, intuitive user interface for continuum manipulators through the use of various joystick mappings. This user interface allows for the effective use of continuum manipulators in the lab and in the field. A novel geometric approach is developed to produce a more intuitive understanding of continuum manipulator kinematics. Using this geometric approach we derive the first closed-form solution to the inverse kinematics problem for continuum robots. Using the derived inverse kinematics to convert from workspace coordinates to configuration space coordinates we develop a potential-field path planner for continuum manipulators.

Evaluation Of Robocode As A Teaching Tool For Computer Programming, Arnold Hensman

Conference Papers

Robocode began as an educational tool to aid in learning Java programming. It has since evolved into something of a phenomenon, as the prospect of creating simple to complex virtual tanks appears to pose an attractive challenge to both novice and expert programmers alike. What started out as a teaching tool has grown into a worldwide network of competitors, all keen to prove that their ‘bot’ stands out from the crowd. Competitions are well organised and many Robocode events are a PR dream for the computing companies that sponsor them. Without a doubt, this easy to use application has sparked …

Extended Abstract Rotopod: A Novel Approach To Efficient Legged Locomotion, Damian M. Lyons

Faculty Publications

A number of attempts have been made to integrate the efficiency of wheeled locomotion with the terrain versatility of legged locomotion, e.g., Univ.Michigan’s Rhex platform and Case Western’s Whegs. Those platforms cast legs as rotating spokes placed traditionally at the corners of a rectangular platform. In this paper, we present an alternate approach, with three legs radiating down from a central hub. The energy to move the platform is generated by a rotating reaction mass mounted at the hub and, at rest, rotating parallel to the ground plane.

Our approach is to construct a platform whose natural, uncontrolled motion is …

Evaluation Of A Parallel Architecture And Algorithm For Mapping And Localization, Damian M. Lyons, Giselle R. Isner

Faculty Publications

The Beowulf cluster approach to parallel computation offers a potentially cheap and robust source of computational power for high complexity algorithms in robotics. The challenge is to integrate this approach with the mobility and time critical response constraints of many robotic algorithms. The key contributions of this paper are: (1) introduction of a computational architecture for integrating a cluster into the control architecture of one or more robots, (2) a cluster implementation of Thrun et al’s Concurrent Localization and Mapping (CML) algorithm, and (3) presentation of results to illustrate the performance of the implemented CML algorithm and validate the architectural …

Combinatorial Fusion Criteria For Robot Mapping, Damian M. Lyons, D. Frank Hsu, Qiang Ma, Liang Wang

Faculty Publications

We address the problem of sensor fusion for stereo and ultrasound depth measurements for map building for a robot operating in a cluttered environment. In such a situation it’s difficult to make useful and realistic assumpt ions about the sensor or environment statistics. Combinatorial Fusion Analysis is used to develop an approach to fusion with unknown sensor and environment statistics. A metric is proposed that shows when fusion from a set of fusion alternatives will produ ce a more accurate estimation of depth than either sonar or stereo alone and when not. The metric consists of two crit eria: (a) …

An Emotional Mimicking Humanoid Biped Robot And Its Quantum Control Based On The Constraint Satisfaction Model, Quay Williams, Scott Bogner, Michael Kelley, Carolina Castillo, Martin Lukac, Dong Hwa Kim, Jeff S. Allen, Mathias I. Sunardi, Sazzad Hossain, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

The paper presents a humanoid robot that responds to human gestures seen by a camera. The behavior of the robot can be completely deterministic as specified by a Finite State Machine that maps the sensor signals to the effector signals. This model is further extended to the constraints-satisfaction based model that links robots vision, motion, emotional behavior and planning. One way of implementing this model is to use adiabatic quantum computer which quadratically speeds-up every constraint problem and will be thus necessary to solve large problems of this type. We propose to use the remotely-connected Orion system by DWAVE Corporation.

Selection Of Fusion Operations Using Rank-Score Diversity For Robot Mapping And Localization, Damian M. Lyons, D. Frank Hsu, Qiang Ma, Liang Wang

Faculty Publications

In this paper, we evaluate the use of a rank-score diversity measure for selecting sensory fusion operations for a robot localization and mapping application. Our current application involves robot mapping and navigation in an outdoor urban search and rescue situation in which we have many similar and mutually occluding landmarks. The robot is a 4- wheel direct drive platform equipped with visual, stereo depth and ultrasound sensors. In such an application it’s difficult to make useful and realistic assumptions about the sensor or environment statistics. Combinatorial Fusion Analysis(CFA) is used to develop an approach to fusion with unknown sensor and …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

A Cognitive Robotics Approach To Comprehending Human Language And Behaviors, Deryle W. Lonsdale, D. Paul Benjamin, Damian Lyons

Faculty Publications

The ADAPT project is a collaboration of researchers in linguistics, robotics and artificial intelligence at three universities. We are building a complete robotic cognitive architecture for a mobile robot designed to interact with humans in a range of environments, and which uses natural language and models human behavior. This paper concentrates on the HRI aspects of ADAPT, and especially on how ADAPT models and interacts with humans.

A Fuzzy Logic Controller For Autonomous Wheeled Vehicles, Mohamed Trabia, Linda Z. Shi, Neil Eugene Hodge

Mechanical Engineering Faculty Research

Autonomous vehicles have potential applications in many fields, such as replacing humans in hazardous environments, conducting military missions, and performing routine tasks for industry. Driving ground vehicles is an area where human performance has proven to be reliable. Drivers typically respond quickly to sudden changes in their environment. While other control techniques may be used to control a vehicle, fuzzy logic has certain advantages in this area; one of them is its ability to incorporate human knowledge and experience, via language, into relationships among the given quantities. Fuzzy logic controllers for autonomous vehicles have been successfully applied to address various …

Combining Multiple Scoring Systems For Video Target Tracking Based On Rank-Score Function Variation, D. Frank Hsu, Damian M. Lyons, Jizhou Ai

Faculty Publications

Tracking of video targets is the process of estimating the current and predicting the future state of a target from a sequence of video sensor measurements. Multitarget video tracking is complicated by the fact that targets can occlude one another and affect video feature measurements in a highly non-linear and difficult to model fashion., Tracking multiple targets that undergo repeated mutual occlusions is a challenging problem with several issues to be addressed. In this paper we propose a multisensory fusion approach to the problem of multitarget video tracking with occlusion. Each sensory cue is treated as a scoring system on …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing: Quarterly Progress Report #6, Kamalakar Alluri, Georg F. Mauer

Fuels Campaign (TRP)

Project Milestones

• Completed a systematic study seeking to arrive at an optimized plant configuration, using value engineering techniques in January 2006.

• Vision-based robot serving and automated plant safety monitoring is currently in progress.

Combinatorial Fusion Criteria For Real-Time Tracking, D. Frank Hsu, Damian M. Lyons, Jizhou Ai

Faculty Publications

We address the problem of automated video tracking of targets when targets undergo multiple mutual occlusions. Our approach is based on the idea that as targets are occluded, selection of feature subsets and combinations of those features are effective in identifying the target and improving tracking performance. We use Combinatorial Fusion Analysis to develop a metric to select which subset of features will produce the most accurate tracking. In particular we show that the combination of a pair of features A and B will improve the accuracy only if (a) A and B have relative high performance, and (b) A …

Feature Selection For Real-Time Tracking, D. Frank Hsu, Damian M. Lyons, Jizhou Ai

Faculty Publications

We address the problem of selecting features to improve automated video tracking of targets that undergo multiple mutual occlusions. As targets are occluded, different feature subsets and combinations of those features are effective in identifying the target and improving tracking performance. We use Combinatorial Fusion Analysis to develop a metric to dynamically select which subset of features will produce the most accurate tracking. In particular we show that the combination of a pair of features A and B will improve the accuracy only if (a) A and B have relative high performance, and (b) A and B are diverse. We …

Mobius: An Omnidirectional Robotic Platform And Software Architecture For Network Teleoperation, Samuel Aaron Miller

Electrical & Computer Engineering Theses & Dissertations

The following thesis presents the results of a project to develop and test an omnidirectional robotic system (hardware and software) at NASA Langley Research Center's Robotics and Intelligent Machines Lab. The impetus for the project was the unique capabilities of omnidirectional systems. Some of the many potential benefits these systems have include improved material-handling capabilities in constrained environments (such as might be found in extraterrestrial manned habitats), efficient camera-based vehicle teleoperation, and simplified route planning for autonomous robot operations.

The project's focus was to design, build, and test a system that used Mecanum wheels to achieve omnidirectional motion. In addition …

Power-Scavenging Mems Robots, Daniel J. Denninghoff

Theses and Dissertations

This thesis includes the design, modeling, and testing of novel, power-scavenging, biologically inspired MEMS microrobots. Over one hundred 500-μm and 990-μm microrobots with two, four, and eight wings were designed, fabricated, characterized. These microrobots constitute the smallest documented attempt at powered flight. Each microrobot wing is comprised of downward-deflecting, laser-powered thermal actuators made of gold and polysilicon; the microrobots were fabricated in PolyMUMPs® (Polysilicon Multi-User MEMS Processes). Characterization results of the microrobots illustrate how wing-tip deflection can be maximized by optimizing the gold-topolysilicon ratio as well as the dimensions of the actuator-wings. From these results, an optimum actuator-wing configuration was …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Analysis Of Gaits For A Rotating Tripedal Robot, Damian M. Lyons, Kiran Pamnany

Faculty Publications

A goal of robotics has been to develop mechanisms that have the efficiency and speed of wheeled robots with the terrain flexibility of legged robots. In previous work, we have proposed a unique three-legged mechanism, the rotopod, designed to integrate these two useful approaches to locomotion. In this paper, we present an analysis of the variety of gaits that can be exhibited by the rotopod. We present examples of many of these gaits and discuss their potential use. A trajectory generation algorithm is presented that can be used to generate point to point trajectories using one of three different styles …

Rotational Legged Locomotion, Damian M. Lyons, Kiran Pamnany

Faculty Publications

In this paper we presented a novel, agile robot mechanism, which we call a rotopod, which combines aspects of wheeled and legged locomotion. A general description of how a tripedal rotopod can be made to step, rotating the mechanism about one leg, and moving the center of the mechanism, is presented. The concept of a gait for this mechanism is defined, and is used to show how extremely agile the mechanism can be. Specific resistance is employed as a way to explore the relative efficiency of this mechanism versus a wheel. Finally, we describe our first prototype rotopod and report …

Rank-Based Multisensory Fusion In Multitarget Video Tracking, Damian M. Lyons, D. Frank Hsu

Faculty Publications

An attractive approach to improve tracking performance for visual surveillance is to use information from multiple visual sensory cues such as position, color, shape, etc. Previous work in fusion for tracking has tended to focus on fusion by numerically combining the scores assigned by each cue. We argue that for video scenes with many targets in a crowded situation, the splitting and merging of regions associated with targets, and the subsequent dramatic changes in cue values and reliabilities, renders this form of fusion less effective. In this paper we present experimental results showing that use of cue rank information in …

A Dynamic Pruning And Feature Selection Strategy For Real-Time Tracking, D. Frank Hsu, Damian M. Lyons

Faculty Publications

Automated video tracking is useful in a number of applications such as surveillance, multisensor networks, robotics and virtual reality. In this paper we investigate an approach to tracking based on fusing the output of a collection of video trackers, each attending to a different feature or cue on the target. We show both theoretically and experimentally that the method used to prune the growth of target hypotheses can have a great impact on the trackers performance, and indirectly, change the benefit of using linear score combination as opposed to a non-linear rank combination for fusion. We also show that the …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing: Quarterly Progress Report #1, Jamil M. Renno, Georg F. Mauer

Fuels Campaign (TRP)

A Hot Cell robotic assembly: Pick and place dynamic simulation, including feedback control with Matlab, was developed for dispersion fuel manufacture.

The deployment of remote manufacturing of transmuter fuel is a necessity for the transmutation applications. In the reporting period, a virtual hot cell for the manufacturing of dispersion fuel was designed using MSC.visualNastran^©, ProEngineer^© and MATLAB^©. Atypical events were successfully simulated. Relevant physical quantities arising during such events were monitored as well.

Physical Intelligent Sensors, Pavan Bandhil, Sanjeevi Chitikeshi, Ajay Mohan Mahajan, Fernando Figueroa

Mechanical Engineering Faculty Research

This paper proposes the development of intelligent sensors as part of an integrated systems approach, i.e. one treats the sensors as a complete system with its own sensing hardware (the traditional sensor), A/D converters, processing and storage capabilities, software drivers, self-assessment algorithms, communication protocols and evolutionary methodologies that allow them to get better with time. Under a project being undertaken at the NASA s Stennis Space Center, an integrated framework is being developed for the intelligent monitoring of smart elements. These smart elements can be sensors, actuators or other devices. The immediate application is the monitoring of the rocket test …

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project was to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models were developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment were also developed. Combined, these two models allow the assessment …