Computer Engineering Commons^™

Software Development Approach For Discrete Simulators, Grzegorz Chmaj, Dawid Maksymilian Zydek

Electrical & Computer Engineering Faculty Research

Simulation is the most common approach to perform the problem research. Among several types of simulation, the most common way is the discrete simulation, which assumes the division of the time scale into fixed length time slots. Depending on investigated problem, simulation packages may be used or it could be necessary to design and create own simulation system. In this paper, we propose the complete pre-study scheme and the most commonly appearing implementation problems with suggested solutions. We also describe how to implement the exemplary simulator in C++.

Chaotic Bandgaps In Hybrid Acousto-Optic Feedback And Their Implications, Monish Ranjan Chatterjee, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

The nonlinear dynamics of a hybrid acousto-optic device was examined from the perspective of the Lyapunov exponent (LE) and bifurcation maps. The plots for LE versus system parameters and bifurcation maps have recently been examined against known simulation results including chaotic encryption experiments [1]. It is verified that the "loop gain" (feedback gain (β) times incident light amplitude (Iin) needs to be greater than one as a necessary , but not sufficient condition for the onset of chaos.

It is found that for certain combinations of β, Iin, net bias voltage (αtοt), and the initial value of the first-order scattered …

File System Simulation: Hierarchical Performance Measurement And Modeling, Hai Quang Nguyen

Graduate Theses and Dissertations

File systems are very important components in a computer system. File system simulation can help to predict the performance of new system designs. It offers the advantages of the flexibility of modeling and the cost and time savings of utilizing simulation instead of full implementation. Being able to predict end-to-end file system performance against a pre-defined workload can help system designers to make decisions that could affect their entire product line, involving several million dollars of investment. This dissertation presents detailed simulation-based performance models of the Linux ext3 file system and the PVFS parallel file system. The models are developed …

Characterizing Multi-Walled Carbon Nanotube Synthesis For Field Emission Applications, Benjamin L. Crossley, Nathan Glauvitz, Betty T. Quinton, Ronald A. Coutu Jr., Peter J. Collins

Electrical and Computer Engineering Faculty Research and Publications

No abstract provided.

Full Custom Vlsi Design Of On-Line Stability Checkers, Chris Y. Lee

Master's Theses

A stability checker is a clocked storage element, much like a flip-flop, which detects unstable and late signals in the pipeline of a digital system. The On-line stability checker operates concurrently with its associated circuit-under-test (CUT). This thesis describes the full custom very-large-scale integration (VLSI) design and testing process of On-Line Stability Checkers. The goals of this thesis are to construct and test Stability Checker designs, and to create a design template for future class projects in the EE 431 Computer-Aided Design (CAD) of VLSI Devices course at Cal Poly.

A method for concurrent fault testing called On-line Stability Checking …

Wireless Embedded Smart Cameras: Performance Analysis And Their Application To Fall Detection For Eldercare., Alvaro Pinto

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Wireless Embedded Smart Camera Networks has received a lot of attention from academia and industry because they are small in size and easy to deploy, and they offer a multitude of attractive applications. They can be used for embedded single unit applications, or can be networked for multi-camera applications.

We first analyze three different operation scenarios for a wireless vision sensor network wherein different levels of local processing is performed. A detailed quantitative comparison of three operation scenarios are presented in terms of energy consumption and latency. This quantitative analysis provides the motivation for performing high-level local processing and decision …

Networks - Ii: A High Bandwidth Covert Channel In Network Protocol, Mehdi Hussain

International Conference on Information and Communication Technologies

Covert channel is secret communication path, which existence is not expected in original system of design. It allows different users access to the same information, at the same time, but from different points-of-view. It is being more and more studying due to the grooming of internet. Always high-bandwidth network covert channel pose the significant risk of detection over network. Although the existing technique utilized the reserved bits of header, timestamp, initial sequence number, packet length etc for network covert channel, to some extend these have good temper resistance. But when increase their covert data capacity they becomes to fail to …

Enhancement Of Optical Emission From Laser-Induced Plasmas By Combined Spatial And Magnetic Confinement, L. B. Guo, W. Hu, B. Y. Zhang, X. N. He, C. M. Li, Y. S. Zhou, Z. X. Cai, X. Y. Zeng, Yongfeng Lu

Department of Electrical and Computer Engineering: Faculty Publications

Within the past decades, laser-induced breakdown spectroscopy (LIBS) has become a well-established and powerful optical emission spectroscopy (OES) analytical technique [1–5]. As a useful analytical tool, LIBS is used extensively in various areas such as remote detection, hostile environment monitoring, and cultural heritage conservation [6–10]. Researchers are paying more attention to LIBS as a diagnostic method for elemental analysis as it is characterized by fast, real-time, in situ, low invasiveness, and multi-elemental diagnosis, normally without the need for sample preparation [11,12]. However, one of its major drawbacks is its low sensitivity, which seriously hinders further improving the limit of detection …

Apparatus For Dispensing Material, Peter Werner Sutter, Eli Anguelova Sutter

Department of Electrical and Computer Engineering: Faculty Publications

An apparatus capable of dispensing drops of material with volumes on the order of Zeptoliters is described. In some embodiments of the inventive pipette the size of the droplets so dispensed is determined by the size of a hole, or channel, through a carbon shell encapsulating a reservoir that contains material to be dispensed. The channel may be formed by irradiation with an electronbeam or other high-energy beam capable of focusing to a spot size less than about 5 nanom eters. In some embodiments, the dispensed droplet remains attached to the pipette by a small thread of material, an atomic …

Super-Resolution For Imagery From Integrated Microgrid Polarimeters, Russell C. Hardie, Daniel A. Lemaster, Bradley M. Ratliff

Electrical and Computer Engineering Faculty Publications

Imagery from microgrid polarimeters is obtained by using a mosaic of pixel-wise micropolarizers on a focal plane array (FPA). Each distinct polarization image is obtained by subsampling the full FPA image. Thus, the effective pixel pitch for each polarization channel is increased and the sampling frequency is decreased. As a result, aliasing artifacts from such undersampling can corrupt the true polarization content of the scene. Here we present the first multi-channel multi-frame super-resolution (SR) algorithms designed specifically for the problem of image restoration in microgrid polarization imagers. These SR algorithms can be used to address aliasing and other degradations, without …

Cyberknife Radiation Modeling: Effects Of Relaxed Translational And Rotational Constraints On Healthy Tissue Irradiation, Sudha Bhavaroop Potineni

Electrical & Computer Engineering Theses & Dissertations

The Cyberknife system is a robotic radio surgery instrument that is used to treat cancers in different parts of the human body. Because of its accuracy and precision, it has become one of the best radio surgery systems in the world. However, even with Cyberknife the treatment time for one session takes from 30 minutes up to 120 minutes depending on the size, shape, and position of the tumor in the human body. In this research, a solution is presented to aid in reducing this long treatment time. An algorithm is developed which simulates the amount of the healthy tissue …

Calibration Of Complex System Dynamics Models: A Practioner's Report, Rod Walker, Wayne Wakeland

Complex Systems Faculty Publications and Presentations

This paper is not a typical academic paper that is solidly grounded in the literature. Instead, this paper reports practitioner’s experiences in rebuilding and calibrating a very large system dynamics model. A prior version of this model had been in use for over 10 years in an ongoing executive training simulation. That model had never worked correctly in several key areas, requiring the outputs to be manually adjusted by very experienced facilitators during the course of the simulation. The present project rebuilt the system dynamics model, redesigned the parts that weren’t working, and calibrated the resulting model to match the …

Novel Microelectromechanical Systems Image Reversal Fabrication Process Based On Robust Su-8 Masking Layers, Scott A. Ostrow Ii, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

This paper discusses a novel fabrication process that uses a combination of negative and positive photoresists with positive tone photomasks, resulting in masking layers suitable for bulk micromachining high-aspect ratio microelectromechanical systems (MEMS) devices. MicroChem's negative photoresist Nano™ SU-8 and Clariant's image reversal photoresist AZ 5214E are utilized, along with a barrier layer, to effectively convert a positive photomask into a negative image. This technique utilizes standard photolithography chemicals, equipment, and processes, and opens the door for creating complementary MEMS structures without added fabrication delay and cost. Furthermore, the SU-8 masking layer is robust enough to withstand aggressive etch chemistries …

Performance Analysis And Optimization Of The Winnow Secret Key Reconciliation Protocol, Kevin C. Lustic

Theses and Dissertations

Currently, private communications in public and government sectors rely on methods of cryptographic key distribution that will likely be rendered obsolete the moment a full-scale quantum computer is realized, or efficient classical methods of factoring are discovered. There are alternative methods for distributing secret key material in a post-quantum era. One example of a system capable of securely distributing cryptographic key material, known as Quantum Key Distribution (QKD), is secure against quantum factorization techniques as its security rests on generally accepted laws of quantum physics. QKD protocols typically include a phase called Error Reconciliation, a clear-text classical-channel discussion between legitimate …

Study Of Cellular Phone Detection Techniques, Nicholas W. Scott

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

This thesis studies techniques for detecting cellular phones.  It examines existing technology currently available on the open market, an existing design that utilizes mostly discrete components, and a design approach using a down converter in conjunction with a bandpass filter.

The existing technologies available on the open market are examined and discussed. These technologies are not adequate, because they are inaccurate and expensive.

The first signal detection technique, an existing design utilizing discrete components is difficult to implement.  They are very affordable to construct, but require precision tuning.  This design is analyzed and found to be inaccurate.

The second signal …

San Luis Obispo Transit Tracker System Back-End Server, Daryl Alan A. Dimalanta

Computer Engineering

This document gives the rationale, design process, technical implementation, testing procedures, and testing results of a back-end server used for the San Luis Obispo (SLO) Transit Tracker System. The SLO Transit Tracker System (SLOTTS) includes client software installed on mobile devices and a back-end server. The purpose of this system is to encourage SLO residents to utilize the transit system by having the client software present current bus location, navigation instructions, and bus schedule in a simple, fast, and easy to use mobile application.

Due to the limited central processing unit (CPU) and limited power supplied by the battery, route …

Programmable Household Led Light Fixture, Jordan Locano

Electrical Engineering

This report details the development and construction of a LED light fixture to be used for household lighting. This document details background information, design ideas, project specifications, production, assembly, testing, and conclusions involved with this project. The goals of this project is to design and build a cost-effective replacement for traditional room lighting that can perform better and last longer than traditional methods.

Autonomous Crash Avoidance System, Brian Ujiie, Gordon Woods, Joshua Miller

Mechanical Engineering

No abstract provided.

Project 308: Augmented Reality Mario Kart, Joseph Abad, David Allender, Joryl Calizo, Ryan Gaspar, Gavin Lee

Computer Engineering

Mario Kart is a popular go-kart racing game developed by Nintendo. The premise of the game is simple: drive a go-kart along a racetrack and reach the finish line before the other players. What makes this game unique, however, is the inclusion of weapons, traps, and other projectiles that a player can use to gain an advantage in the race. We have taken on the challenge of not only recreating this amazing game, but using the art of Augmented Reality to fully immerse the player in the full experience. Rather than play the game on a television screen with a …

Discrete Alarm Clock, Travis Moore, Collin Barth

Electrical Engineering

The standard alarm clock, as used daily by millions worldwide, has clear room for modification and improvement.  This paper documents an implementation that rectifies many of these flaws.  Improvements include adjustable snooze length, an IR remote for ease of use, and an RF headset for discrete alarm use or potential incorporation into a device much like a hearing aid.  The processes involved in creating a digital alarm clock, as well as the obstacles met in the implementation of the enhanced design, are detailed within.

Design And Implementation Of A Byzantine Fault Tolerance Framework For Non-Deterministic Applications, H. Zhang, Wenbing Zhao, Louise E. Moser, P. Michael Melliar-Smith

Electrical and Computer Engineering Faculty Publications

State-machine-based replication is an effective way to increase the availability and dependability of mission-critical applications. However, all practical applications contain some degree of non-determinism. Consequently, ensuring strong replica consistency in the presence of application non-determinism has been one of the biggest challenges in building dependable distributed systems. In this Study, the authors propose a classification of common types of application non-determinism with respect to the requirement of achieving Byzantine fault tolerance (BFT), and present the design and implementation of a BFT framework that controls these types of non-determinism in a systematic manner.

Fuzzy Robot Controller Tuning With Biogeography-Based Optimization, George Thomas, Paul Lozovyy, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

Biogeography-based optimization (BBO) is an evolutionary algorithm (EA) based upon the models of biogeography, which describe the relationship between habitat suitability and the migration of species across habitats. In this work, we apply BBO to the problem of tuning the fuzzy tracking controller of mobile robots. This is an extension of previous work, in which we used BBO to tune a proportional-derivative (PD) controller for these robots. We show that BBO can successfully tune the shape of membership functions for a fuzzy controller with both simulation and real world experimental results.

Multispectral Classification With Bias-Tunable Quantum Dots-In-A-Well Focal Plane Arrays, Biliana S. Paskaleva, Woo-Yong Jang, Yagya D. Sharma, Sanjay Krishna, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

Mid-wave and long-wave infrared (IR) quantum-dots-in-a-well (DWELL) focal plane arrays (FPAs) are promising technology for multispectral (MS) imaging and sensing. The DWELL structure design provides the detector with a unique property that allows the spectral response of the detector to be continuously, albeit coarsely, tuned with the applied bias. In this paper, a MS classification capability of the DWELL FPA is demonstrated. The approach is based upon: 1) imaging an object repeatedly using a sequence of bias voltages in the tuning range of the FPA and then 2) applying a classification algorithm to the totality of readouts, over multiple biases, …

Fault-Tolerant Technique For Δ-Connected Ac-Motor Drives, Ahmed Mohamed Sayed Ahmed, Behrooz Mirafzal, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

A fault-tolerant technique for motor-drive systems is introduced in this paper. The technique is merely presented for ac motors with Δ-connected circuits in their stator windings. In this technique, the faulty phase is isolated by solid-state switches after the occurrence of a failure in one of the stator phases. Then, the fault-tolerant technique manages current-flow in the remaining healthy phases. This technique is to significantly mitigate torque pulsations, which are caused by an open-Δ configuration in the stator windings. The performance of the fault-tolerant technique was experimentally verified using a 5-hp 460-V induction motor-drive system and the results are presented …

Ios Mobile Device Forensics: Initial Analysis, Rita M. Barrios, Michael R. Lehrfeld

Annual ADFSL Conference on Digital Forensics, Security and Law

The ability to recover forensic artifacts from mobile devices is proving to be an ever-increasing challenge for investigators. Coupling this with the ubiquity of mobile devices and the increasing complexity and processing power they contain results in a reliance on them by suspects. In investigating Apple’s iOS devices -- namely the iPhone and iPad -- an investigator’s challenges are increased due to the closed nature of the platforms. What is left is an extremely powerful and complex mobile tool that is inexpensive, small, and can be used in suspect activities. Little is known about the internal data structures of the …

Forensic Analysis Of Smartphones: The Android Data Extractor Lite (Adel), Felix Freiling, Michael Spreitzenbarth, Sven Schmitt

Annual ADFSL Conference on Digital Forensics, Security and Law

Due to the ubiquitous use of smartphones, these devices become an increasingly important source of digital evidence in forensic investigations. Thus, the recovery of digital traces from smartphones often plays an essential role for the examination and clarification of the facts in a case. Although some tools already exist regarding the examination of smartphone data, there is still a strong demand to develop further methods and tools for forensic extraction and analysis of data that is stored on smartphones. In this paper we describe specifications of smartphones running Android. We further introduce a newly developed tool – called ADEL – …

Survey On Cloud Forensics And Critical Criteria For Cloud Forensic Capability: A Preliminary Analysis, Keyun Ruan, Ibrahim Baggili, Joe Carthy, Tahar Kechadi

Annual ADFSL Conference on Digital Forensics, Security and Law

In this paper we present the current results and analysis of the survey “Cloud forensics and critical criteria for cloud forensic capability” carried out towards digital forensic experts and practitioners. This survey was created in order to gain a better understanding on some of the key questions of the new field - cloud forensics - before further research and development. We aim to understand concepts such as its definition, the most challenging issues, most valuable research directions, and the critical criteria for cloud forensic capability.

Keywords: Cloud Forensics, Cloud Computing, Digital Forensics, Survey, Cloud Forensic Capability

Kindle Forensics: Acquisition & Analysis, Peter Hannay

Annual ADFSL Conference on Digital Forensics, Security and Law

The Amazon Kindle eBook reader supports a wide range of capabilities beyond reading books. This functionality includes an inbuilt cellular data connection known as Whispernet. The Kindle provides web browsing, an application framework, eBook delivery and other services over this connection. The historic data left by user interaction with this device may be of forensic interest. Analysis of the Amazon Kindle device has resulted in a method to reliably extract and interpret data from these devices in a forensically complete manner.

Keywords: forensics, digital forensics, kindle, mobile, embedded, ebook, ereader

Aacsb‐Accredited Schools’ Adoption Of Information Security Curriculum, Linda Lau, Cheryl Davis

Annual ADFSL Conference on Digital Forensics, Security and Law

The need to professionally and successfully conduct computer forensic investigations of incidents has never been greater. This has launched an increasing demand for a skilled computer security workforce (Locasto, et al., 2011). This paper examines the extent to which AACSB-accredited universities located in Virginia, Maryland and Washington, D.C. are working towards providing courses that will meet this demand. The authors conduct an online research of the information security courses and programs offered by the 27 AACSB-accredited business schools in the selected area.

The preliminary investigation revealed that eight of the 27 participating universities did not offer any courses in cybersecurity, …

Digital Forensics Investigation In A Collegiate Environment, Robert E. Johnston

Annual ADFSL Conference on Digital Forensics, Security and Law

Creating, building, managing a cost effective digital forensics lab including a team of qualified examiners can be a challenge for colleges [1] with multiple campuses in multiple towns, counties and states. Leaving such examination responsibilities to each of the campuses results in not only disparity in the results but more than likely excessive duplication of efforts as well as the potential for compromise of evidence. Centralizing the forensic efforts results in a team that is not subject to the political pressures of a campus and virtually eliminates the possibility of examiner favoritism. Learn what it takes to create a cost …