Computer Engineering Commons^™

Is Tech M&A Value-Additive?, Ani Deshmukh

Undergraduate Economic Review

Given rising M&A deal volume across all high-tech subsectors, the ability to measure post-acquisition performance becomes critical. Despite this growth, the relevant academic literature is severely lacking (Kohers and Kohers 2000). Using an event-study approach, I find that acquirers and targets both realize statistically significant day-0 abnormal returns (1.23% [p<0.1] and 8.1% [p<0.01], respectively). As positive stock returns signal positive growth prospects in a semi-strong efficient market, AR regressions found that firms' technological relatedness, deal financing, purchase price premiums, and the relative book to market ratio, explained most variance. Overall, high-tech transactions are value-additive for both targets and acquirers.

Physico-Chemical, And Sensory Properties Of Soy Based Gouda Cheese Analog Made From Different Concentration Of Fat, Sodium Citrate And Various Cheese Starter Cultures, Abu Amar, Ingrid Suryanti Surono

Makara Journal of Technology

Gouda cheese analog (GCA) was made using soy protein isolate (SPI), skim milk powder (SMP), fat (palm fat and butter fat), and water (W) at optimal ratio of SPI : SMP : F : W = 14 : 6 : 20 : 60. The effects of butter fat, sodium citrate, and cheese starter culture on the sensory properties of ripened product were assessed by preference test, hedonic test, and the texture profile analysis (TPA) of GCA. The free fatty acids, water-soluble nitrogen, and reduction in pH value of progel were also measured. The use of 100% butter fat (BF) produced …

Effects Of Deposition Parameters And Oxygen Addition On Properties Of Sputtered Indium Tin Oxide Films, Badrul Munir, Rachmat Adhi Wibowo, Kim Kyoo Ho

Makara Journal of Technology

Indium tin oxide (ITO) films were sputtered on corning glass substrate. Oxygen admixture and sputtering deposition parameters were optimized to obtain the highest transparency as well as lowest resistivity. Structural, electrical and optical properties of the films were then examined. Increasing deposition rate and film thickness changed the crystallographic orientation from (222) to (400) and (440), as well as higher surface roughness. It was necessary to apply substrate heating during reposition to get films with better crystallinity. The lowest resistivity of 5.36 x 10-4 Ω•cm was obtained at 750 nm film thickness. The films’ resistivity was increased by addition of …

The Effect Of Rubber Mixing Process On The Curing Characteristics Of Natural Rubber, Abu Hasan, Rochmadi Rochmadi, Hary Sulistyo, Suharto Honggokusumo

Makara Journal of Technology

This research is aimed at studying the relationship between rubber mixing processes and curing characteristics of natural rubber. The curing characteristic analysis was carried out through a natural rubber formula having been masticated and mixed, followed by curing. As many as four mastication methods were finely applied; each respected four sequences of rubber mixing process. In the first method, rubber was masticated for 5 minutes and then rubber chemicals and carbon black N 330 were simultaneously added. In the second and the third methods, rubber was masticated for 1 minute and then carbon blacks and rubber chemicals were also simultaneously …

Observation Of Center Disaster Damage On Pariaman And Wasior Using Differential Sar Interferometry (Dinsar), Dodi Sudiana, Mia Rizkinia

Makara Journal of Technology

This study focuses on disaster observations in Pariaman (West Sumatera) and Wasior (Papua) using remote sensing techniques (differential SAR interferometry). Differential interferometry (DInSAR) method was performed on two PALSAR data sets with different acquisition months, i.e. about a month after and before disaster, respectively. The center damage of Pariaman earthquake and Wasior flood can be determined by deriving Land Subsidence using DInSAR method.

Coastal Physical Vulnerability Of Surabaya And Its Surrounding Area To Sea Level Rise, Sayidah Sulma, Eko Kusratmoko, Ratna Saraswati

Makara Journal of Technology

The study for coastal vulnerability to sea level rise was carried out in Surabaya and its surrounding area, it has focused on calculations of the physical vulnerability index were used coastal vulnerability index (CVI) methods. It was standardized by the multi criteria analysis (MCA) approach according to the study area. The score of each physical variable derived from remote sensing satellite data and the results of studies that have been done, such as modeling results and thematic maps, and then integrated into geographic information systems (GIS). Result of this study shows that the coastal areas of Gresik, Surabaya, and Sidoarjo …

The Effect Of Size And Crumb Rubber Composition As A Filler With Compatibilizer Pp-G-Ma In Polypropylene Blends And Sir-20 Compound On Mechanical And Thermal Properties, Erna Frida

Makara Journal of Technology

Having been researched the development of thermoplastic elastomer material of polypropylene and natural rubber SIR- 20 compound with Crumb Rubber as the filler. Reinforced polypropylene with size 60 mesh with 1 mm, and the composition of the Crumb rubber (30, 40, and 50) wt%. Observed mechanical properties are tensile strength, fracture elongation, Young's modulus, tear strength and impact strength. Thermal properties are analyzed by DSC and DTA/TGA. It is acquired that for the size of 60 mesh crumb rubber tensile strength, fracture elongation, Young’s modulus, tear strength and impact strength are bigger than 1mm size. The addition of 60 mesh …

Development Of Local-Economic-Development Small And Medium Industries (Led-Sme) In East Java, Rachmad Hidayat, Sabarudin Akhmad

Makara Journal of Technology

This paper presents the effects of Indonesian government’s developmental efforts of assistance and training performed on the growth of LED-SME business units and business performance. Both parameters of the government’s assistance and training were used to analyze the impact to the growth and performance of business unit. To achieve a comprehensive result, samples acquired in this research were about 190 entrepreneurs and managers of LED-SME from East Java. Based on the parameters above, there are five hypotheses made to prove the relationship of the assistance and training to the growth and performance of business units. The structural equation modeling (SEM) …

Cdm Potential In Palm Solid Waste Cogeneration As An Alternative Energy In Aceh Province, Mahidin Mahidin, Izarul Machdar, Muhammad Faisal, Muhammad Nizar

Makara Journal of Technology

Empty Fruit Bunch (EFB) as a solid waste in Crude Palm Oil (CPO) industry does not utilized yet as an alternative energy source to generate electricity. It is well known that use of solid wate (biomass) as an energy source is part of the Clean Development Mechanism (CDM) scheme due to direct reduction of Green House Gases (GHGs) emission and provide a direct contribution to sustainable development. Utilization of EFB as a source of energy is very potential to be implemented in Aceh since this province has 25 CPO Mills at the moment which actively produce about 870,000 ton EFB …

Small Scale Experiment: Thermal Performance Comparison Between Fiber-Cement Roof And Photovoltaic Roof In Malang, Indonesia, Nurhamdoko Bonifacius, Sri Nastiti Nugrahani Ekasiwi

Makara Journal of Technology

Irradiation on the surface of photovoltaic module heats up the photovoltaic module itself and the room underneath the roof of integrated photovoltaic building in the tropics area. Room heating reduces thermal condition and photovoltaic module surface heating reduces its performance in generating electricity. This paper discusses an experiment of measuring the surface temperature of photovoltaic modules and fiber-cement roof surface as a comparison. This experiment also measures the impact of rising temperatures in each space underneath. It used small-scale mock-ups exposed to direct sunlight. The result of the experiment shows that photovoltaic roof surface temperature is lower than fiber-cement roof …

Improved Optical Probe For Measuring Phytoplankton Suspension Concentrations Based On Optical Fluoresensce And Absorption, Retno Wigajatri Purnamaningsih, Nining Betawati Prihantini

Makara Journal of Technology

This paper discusses the results of improved optical probe that works according to optical fluorescence and absorption phenomena for measuring the phytoplankton suspension concentrations. Measurements are made on the Scenedesmus sp. culture. The laboratory test has shown that range of concentration from 104 up to around 1 x 106 cells/mL; fluorescence intensity at λ = 685 nm; and logarithmic of transmission intensity at λ = 405 nm are proportional to the cell concentration linear with proportional constant γ = 4 × 10-5 and β = –2 × 10-7 mL/cell respectively.

Mechanical And Thermal Properties Of Polypropylene Reinforced By Calcined And Uncalcined Zeolite, Nurdin Bukit

Makara Journal of Technology

This study was carried out to compare mechanical and thermal properties of polypropylene (PP) reinforced with uncalcined and calcined zeolites. The PP samples were reinforced with zeolites at various quantities of 2, 4, and 6 (wt %). The comparison of the two types of zeolite was based on mechanical properties, including tensile strength, elongation at break, and Young’s modulus, and thermal characteristics analyzed using DSC, and DTA/TGA technique. The results obtained clearly revealed that both zeolites were able to significantly increase tensile strength and Young’s modulus of the samples, with calcined zeolite was found to work better. Addition of calcined …

Benchmark For Country-Level Earthquake Strong-Motion Instrumentation Program, Widjojo Adi Prakoso, I Nyoman Sukanta

Makara Journal of Technology

An empirical study to develop benchmark models at country-level to assess the suggested number of earthquake strongmotion stations based on a framework encompassing geographic, demographic, and socio-economic parameters is reported. The models are to provide a working estimate of the required number of stations for improving the strongmotion instrumentation program of Indonesia. National earthquake strong-motion networks of New Zealand, Japan, Taiwan, Iran, Turkey, and Italy were used as the references. The parameter proposed is the number of stations in land area of 1,000 km2, and three models based on the exponential regression analysis are presented as functions of population density, …

Worst Case Of Relative Disturbance Gain Array For Uncertain Distillation System, Rudy Agustriyanto, Jie Zhang

Makara Journal of Technology

This article discusses the constrained nonlinear optimization formulation for calculating the worst case of lower and upper bounds of relative disturbance gain array (RDGA) for uncertain process models. The proposed approach seeks the minimum and maximum values of the relative disturbance gains subject to the constraints in which the process and disturbance gains are within their uncertainty ranges. RDGA ranges are useful for control structure determination and the related robustness, as they provide information regarding the sensitivity to gain uncertainties. The proposed method is demonstrated by ternary distillation column case study. Closed loop simulation results support the analysis based on …

Biodiesel Production From Waste Cooking Oil Using Hydrodinamic Cavitation, Muhammad Dani Supardan, Satriana Satriana, Mahlinda Mahlinda

Makara Journal of Technology

The aim of this research was to study biodiesel production from low cost feedstock of waste cooking oil (WCO) using hydrodynamic cavitation apparatus. A two-step processes esterification process and transesterification process using hydrodynamic cavitation for the production of biodiesel from WCO is presented. The first step is acid-catalyzed esterification process for reducing free fatty acid (FFA) content of WCO and followed by base-catalyzed transesterification process for converting WCO to biodiesel as the second step. The result of esterification process with methanol to oil molar ratio of 5 and temperature of 60 oC showed that the initial acid value of WCO …

Knowledge Dictionary For Information Extraction On The Arabic Text Data, Wahyu Syaifullah Jauharis Saputra, Agus Zainal Arifin, Anny Yuniarti

Makara Journal of Technology

Information extraction is an early stage of a process of textual data analysis. Information extraction is required to get information from textual data that can be used for process analysis, such as classification and categorization. A textual data is strongly influenced by the language. Arabic is gaining a significant attention in many studies because Arabic language is very different from others, and in contrast to other languages, tools and research on the Arabic language is still lacking. The information extracted using the knowledge dictionary is a concept of expression. A knowledge dictionary is usually constructed manually by an expert and …

Temporal Data Mining Of Uncertain Water Reservoir Data, Abhinaya Mohan, Peter Revesz

School of Computing: Conference and Workshop Papers

This paper describes the challenges of data mining uncertain water reservoir data based on past human operations in order to learn from them reservoir policies that can be automated for the future operation of the water reservoirs. Records of human operations of water reservoirs often contain uncertain data. For example, the recorded amounts of water released and retained in the water reservoirs are typically uncertain, i.e., they are bounded by some minimum and maximum values. Moreover, the time of release is also uncertain, i.e., typically only monthly or weekly amounts are recorded. To increase the effectiveness of data mining of …

Stress Monitoring Of Post-Processed Mems Silicon Microbridge Structures Using Raman Spectroscopy, Lavern A. Starman, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Inherent residual stresses during material deposition can have profound effects on the functionality and reliability of fabricated Micro-Electro-Mechanical Systems (MEMS) devices. Residual stress often causes device failure due to curling, buckling, or fracture. Typically, the material properties of thin films used in surface micromachining are not well controlled during deposition. The residual stress; for example, tends to vary significantly for different deposition methods. Currently, few nondestructive techniques are available to measure residual stress in MEMS devices prior to the final release etch. In this research, micro-Raman spectroscopy is used to measure the residual stresses in polysilicon MEMS microbridge devices. This …

[Accepted Article Manuscript Version (Postprint)] Track Me To Track Us: Leveraging Short Range Wireless Technologies For Enabling Energy Efficient Wi-Fi-Based Localization, Mohamed Abdellatif, Abderrahmen Mtibaa, Khaled Harras

Computer Science Faculty Works

Given the success of outdoor tracking via GPS and the rise of real-time context-aware services, users will soon rely on applications that require higher granularity indoor localization. This need is further manifested in countries like Qatar, where various social and business activities occur indoors. Wi-Fi-based indoor localization is one of the most researched techniques due to its ubiquitous deployment and acceptable accuracy for a wide range of applications. However, we do not witness such techniques widely deployed mainly due to their high demand on energy, which is a precious commodity in mobile devices. We propose an energy-efficient indoor localization system …

Wireless Networks-On-Chips: Architecture, Wireless Channel, And Devices, David W. Matolak, Avinash Kodi, Savas Kaya, Dominic Ditomaso, Soumyasanta Laha, William Rayess

Faculty Publications

Wireless networks-on-chips (WINoCs) hold substantial promise for enhancing multicore integrated circuit performance, by augmenting conventional wired interconnects. As the number of cores per IC grows, intercore communication requirements will also grow, and WINoCs can be used to both save power and reduce latency. In this article, we briefly describe some of the key challenges with WINoC implementation, and also describe our example design, iWISE, which is a scalable wireless interconnect design. We show that the integration of wireless interconnects with wired interconnects in NoCs can reduce overall network power by 34 percent while achieving a speedup of 2.54 on real …

Fabrication Process Comparison And Dynamics Evaluation Of Electrothermal Actuators For A Prototype Mems Safe And Arming Devices, Scott A. Ostrow Ii, Robert A. Lake, J. P. Lombardi Iii, Ronald A. Coutu Jr., Lavern A. Starman

Electrical and Computer Engineering Faculty Research and Publications

Electrothermal actuators fabricated using the Polysilicon Multi-User MEMS Process (PolyMUMPs) and the Sandia Ultra-Planar, Multi-Level MEMS Technology 5 (SUMMiT V) have been investigated for use in integrated microelectromechanical systems (MEMS) safe and arming devices. The fabricated electrothermal actuators have been dynamically tested to determine and compare the responses of devices from both processes. Furthermore, the integration of these devices into a safe and arming device were tested and investigated for each process. Initial results indicate that the SUMMiT devices provide the most optimum results based on consistency of operation and reliability.

Sar-Based Vibration Estimation Using The Discrete Fractional Fourier Transform, Qi Wang, Matthew Pepin, Ryan J. Beach, Ralf Dunkel, Tom Atwood, Balu Santhanam, Walter Gerstle, Armin W. Doerry, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

A vibration estimation method for synthetic aperture radar (SAR) is presented based on a novel application of the discrete fractional Fourier transform (DFRFT). Small vibrations of ground targets introduce phase modulation in the SAR returned signals. With standard preprocessing of the returned signals, followed by the application of the DFRFT, the time-varying accelerations, frequencies, and displacements associated with vibrating objects can be extracted by successively estimating the quasi-instantaneous chirp rate in the phase-modulated signal in each subaperture. The performance of the proposed method is investigated quantitatively, and the measurable vibration frequencies and displacements are determined. Simulation results show that the …

Subwavelength Ripples Adjustment Based On Electron Dynamics Control By Using Shaped Ultrafast Laser Pulse Trains, Lan Jiang, Xuesong Shi, Xin Li, Yanping Yuan, Cong Wang, Yongfeng Lu

Department of Electrical and Computer Engineering: Faculty Publications

This study reveals that the periods, ablation areas and orientations of periodic surface structures (ripples) in fused silica can be adjusted by using designed femtosecond (fs) laser pulse trains to control transient localized electron dynamics and corresponding material properties. By increasing the pulse delays from 0 to 100fs, the ripple periods are changed from ~550nm to ~255nm and the orientation is rotated by 90°. The nearwavelength/subwavelength ripple periods are close to the fundamental/second-harmonic wavelengths in fused silica respectively. The subsequent subpulse of the train significantly impacts free electron distributions generated by the previous subpulse(s), which might influence the formation mechanism …

Fast Super-Resolution Using An Adaptive Wiener Filter With Robustness To Local Motion, Russell C. Hardie, Kenneth J. Barnard

Electrical and Computer Engineering Faculty Publications

We present a new adaptive Wiener filter (AWF) super-resolution (SR) algorithm that employs a global background motion model but is also robust to limited local motion. The AWF relies on registration to populate a common high resolution (HR) grid with samples from several frames. A weighted sum of local samples is then used to perform nonuniform interpolation and image restoration simultaneously. To achieve accurate subpixel registration, we employ a global background motion model with relatively few parameters that can be estimated accurately. However, local motion may be present that includes moving objects, motion parallax, or other deviations from the background …

Heuristic Algorithms For Optimization Of Task Allocation And Result Distribution In Peer-To-Peer Computing Systems, Grzegorz Chmaj, Krzysztof Walkowiak, Michal Tarnawski, Michal Kucharzak

Electrical & Computer Engineering Faculty Research

Recently, distributed computing system have been gaining much attention due to a growing demand for various kinds of effective computations in both industry and academia. In this paper, we focus on Peer-to-Peer (P2P) computing systems, also called public-resource computing systems or global computing systems. P2P computing systems, contrary to grids, use personal computers and other relatively simple electronic equipment (e.g., the PlayStation console) to process sophisticated computational projects. A significant example of the P2P computing idea is the BOINC (Berkeley Open Infrastructure for Network Computing) project. To improve the performance of the computing system, we propose to use the P2P …

Noise Impacts From Professional Dog Grooming Forced-Air Dryers, Peter M. Scheifele, Michael T. Johnson, David C. Byrne, John G. Clark, Ashley Vandlik, Laura W. Kretschmer, Kristine E. Sonstrom

Electrical and Computer Engineering Faculty Research and Publications

This study was designed to measure the sound output of four commonly used brands of forced-air dryers used by dog groomers in the United States. Many dog groomers have questions about the effect of this exposure on their hearing, as well as on the hearing of the dogs that are being groomed. Readings taken from each dryer at 1 meter (the likely distance of the dryer from the groomer and the dog) showed average levels ranging from 105.5 to 108.3 dB SPL or 94.8 to 108.0 dBA. Using the 90 dBA criterion required by the US Occupational Safety and Health …

Bayesian Speaker Adaptation Based On A New Hierarchical Probabilistic Model, Wen-Lin Zhang, Wei-Qiang Zhang, Bi-Cheng Li, Dan Qu, Michael T. Johnson

Electrical and Computer Engineering Faculty Research and Publications

In this paper, a new hierarchical Bayesian speaker adaptation method called HMAP is proposed that combines the advantages of three conventional algorithms, maximum a posteriori (MAP), maximum-likelihood linear regression (MLLR), and eigenvoice, resulting in excellent performance across a wide range of adaptation conditions. The new method efficiently utilizes intra-speaker and inter-speaker correlation information through modeling phone and speaker subspaces in a consistent hierarchical Bayesian way. The phone variations for a specific speaker are assumed to be located in a low-dimensional subspace. The phone coordinate, which is shared among different speakers, implicitly contains the intra-speaker correlation information. For a specific speaker, …

Active Storage And Ssd Caching In An Object Storage Environment, Michael T. Runde

Master's Theses

The advancing performance and lowering costs required to implement additional processing power on system peripherals such as disk drives are increasingly allowing additional computing ability to be located directly on individual drives. Active Storage attempts to take advantage of this excess by moving some computationally intensive applications directly to the disk drives. This can remove the bottlenecks seen through interconnects between the drives and the CPU of an initiating system as well as remove the need for systems to handle these applications.

The contributions of this thesis are in two areas. The first is the development of a framework designed …

Analyzing The Non-Functional Requirements In The Desharnais Dataset For Software Effort Estimation, Ali Bou Nassif, Luiz Fernando Capretz, Danny Ho

Electrical and Computer Engineering Publications

Studying the quality requirements (aka Non-Functional Requirements (NFR)) of a system is crucial in Requirements Engineering. Many software projects fail because of neglecting or failing to incorporate the NFR during the software life development cycle. This paper focuses on analyzing the importance of the quality requirements attributes in software effort estimation models based on the Desharnais dataset. The Desharnais dataset is a collection of eighty one software projects of twelve attributes developed by a Canadian software house. The analysis includes studying the influence of each of the quality requirements attributes, as well as the influence of all quality requirements attributes …

Spectral Analysis Of Encrypted Chaotic Signals Using Fast Fourier Transforms And Laboratory Spectral Analyzers, Monish Ranjan Chatterjee, Abhinay Kundur

Electrical and Computer Engineering Faculty Publications

The use of acousto-optic chaos, as manifested via first-order feedback in an acousto-optic Bragg cell, in encrypting a message wave and subsequently recovering the message in the receiver using a chaotic heterodyne strategy, has been reported recently [1-3]. In examining the dynamical system analytically using computer simulation, (expected) modulated chaos waveforms are obtained within specified observation windows.

Because of the relatively random nature inherent in chaos waveforms, it is essentially impossible to ascertain from the visual display of the chaotic wave whether a given message signal has in fact modulated the chaotic "carrier". In fact, it has been observed from …