Computer Engineering Commons^™

Synthesis And Characterization Of Graphene, Ashok Em Sudhakar

UNLV Theses, Dissertations, Professional Papers, and Capstones

Graphene is an important nanoscale material with unique electronic and optical properties. Due to its many potential applications, grapheme was the subject of a Nobel Prize in physics 2010; Andre Geim and Kostya Novoselov of Manchester University received the Nobel Prize for demonstrating the ability to create single atom thick graphene layers from bulk graphite. Since then, many alternative synthesis techniques and device applications of graphene have been explored. An important and unique property of graphene is its excellent thermal properties. Graphene has a two dimensional structure and the thermal properties are significantly different than three dimensional bulk materials. Using …

A Backend Framework For The Efficient Management Of Power System Measurements, Benjamin Mccamish, Rich Meier, Jordan Landford, Robert B. Bass, David Chiu, Eduardo Cotilla-Sanchez

Electrical and Computer Engineering Faculty Publications and Presentations

Increased adoption and deployment of phasor measurement units (PMU) has provided valuable fine-grained data over the grid. Analysis over these data can provide insight into the health of the grid, thereby improving control over operations. Realizing this data-driven control, however, requires validating, processing and storing massive amounts of PMU data. This paper describes a PMU data management system that supports input from multiple PMU data streams, features an event-detection algorithm, and provides an efficient method for retrieving archival data. The event-detection algorithm rapidly correlates multiple PMU data streams, providing details on events occurring within the power system. The event-detection algorithm …

Design Of A Wide Area Controller Using Eigenstructure Assignment In Power Systems, Parimal Saraf

All Dissertations

Small signal stability has become a major concern for power system operators around the world. This has resulted from constantly evolving changes in the power system ranging from increased number of interconnections to ever increasing demand of power. In highly stressed operating conditions, even a small disturbance such as a load change can make the system unstable resulting in small signal instability. The main reason for small signal instability in power systems is an inter-area mode/s becoming unstable. Inter-area modes involve a group of generators oscillating against each other. Traditionally, power system stabilizers installed on the synchrous machines were used …

An Example Of Atomic Requirements - Login Screen, William L. Honig

Computer Science: Faculty Publications and Other Works

A simple example of what an atomic or individual or singular requirement statement should be. Using the example of the familiar login screen, shows the evolution from a low quality initial attempt at requirements to a complete atomic requirement statement. Introduces the idea of a system glossary to support the atomic requirement.

Atomic Requirements Quick Notes, William L. Honig, Shingo Takada

Computer Science: Faculty Publications and Other Works

Working paper on atomic requirements for systems development and the importance of singular, cohesive, individual requirements statements. Covers possible definitions of atomic requirements, and their characteristics. Atomic requirements improve many parts of the development process from requirements to testing and contracting.

Conceptual Design Of Sleeve Rotor Synchronous Reluctance Motor For Traction Applications, Patel B. Reddy, Kevin Grace, Ayman M. El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

Synchronous reluctance machines are very appealing for high speed traction motor design due to their robustness, simple structure, absence of magnets, and simple control. The absence of magnets means that synchronous reluctance (SynRel) machines are not susceptible to price variability and sustainability of rare-earth materials. Moreover, there are no concerns about demagnetisation or uncontrolled generation mode. However, the challenge of achieving a good constant power to speed ratio is dependent on the mechanical aspects of the design. Conventional SynRel designs perform poorly compared with the permanent magnet machines due to the presence of bridges and/or centre posts in absence of …

Advances In Repurposing And Recycling Of Post-Vehicle-Application Lithium-Ion Batteries, Charles R. Standridge, Lindsay Corneal, Nicholas Baine

Mineta Transportation Institute

Increased electrification of vehicles has increased the use of lithium-ion batteries for energy storage, and raised the issue of what to do with post-vehicle-application batteries. Three possibilities have been identified: 1) remanufacturing for intended reuse in vehicles; 2) repurposing for non-vehicle, stationary storage applications; and 3) recycling, extracting the precious metals, chemicals and other byproducts. Advances in repurposing and recycling are presented, along with a mathematical model that forecasts the manufacturing capacity needed for remanufacturing, repurposing, and recycling. Results obtained by simulating the model show that up to a 25% reduction in the need for new batteries can be achieved …

Prevention Of Drone Jamming Using Hardware Sandboxing, Joshua Mead

Graduate Theses and Dissertations

In this thesis, we concern ourselves with the security of drone systems under jamming-based attacks. We explore a relatively new concept we previously devised, known as hardware sandboxing, to provide runtime monitoring of boundary signals and isolation through resource virtualization for non-trusted system-on-chip (SoC) components. The focus of this thesis is the synthesis of this design and structure with the anti-jamming, security needs of drone systems. We utilize Field Programmable Gate Array (FPGA) based development and target embedded Linux for our hardware sandbox and drone hardware/software system.

We design and implement our working concept on the Digilent Zybo FPGA, which …

Achieving A Better Balance Between Productivity And Performance On Fpgas Through Heterogeneous Extensible Multiprocessor Systems, Abazar Sadeghian

Graduate Theses and Dissertations

Field Programmable Gate Arrays (FPGAs) were first introduced circa 1980, and they held the promise of delivering performance levels associated with customized circuits, but with productivity levels more closely associated with software development. Achieving both performance and productivity objectives has been a long standing challenge problem for the reconfigurable computing community and remains unsolved today. On one hand, Vendor supplied design flows have tended towards achieving the high levels of performance through gate level customization, but at the cost of very low productivity. On the other hand, FPGA densities are following Moore's law and and can now support complete multiprocessor …

Human Factors In The Development Of The Mobile Extreme Environment Research Station (Meers) Mission Control System (Mcs), Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the MEERS MCS were required to develop a novel interface for their product. During the development of the MCS, analytical human factors methods and display principles were implemented to create the user interface. The methods and principles were also used so the MCS had a user centered design. The MCS went through several iterations of design. This presentation discusses the development process of the MEERS MCS from a human factors standpoint.

Work Protecting Sensitive Data In Vanets Using Active Data Bundles, Abduljaleel M. Al Hasnawi

Research and Creative Activities Poster Day

Conclusions

• Integrating ADB with VANETs inaneffective and efficient way shouldsolvemost of the privacyissuesin VANETs
• ADB is extensible -allows adding more security and privacy protection mechanisms
• According to the sensitivity of the carried data

Future Work

• Evaluateusing ADB in VANETs via simulation
• Propose ADB routingprotocolfor VANETs
• Apply the proposed solution to diverseVANETapplications

Reconfigurable Battery Techniques And Systems: A Survey, Song Ci, Ni Lin, Dalei Wu

Department of Electrical and Computer Engineering: Faculty Publications

Battery packs with a large number of battery cells are becoming more and more widely adopted in electronic systems, such as robotics, renewable energy systems, energy storage in smart grids, and electronic vehicles. Therefore, a well-designed battery pack is essential for battery applications. In the literature, the majority of research in battery pack design focuses on battery management system, safety circuit, and cell-balancing strategies. Recently, the reconfigurable battery pack design has gained increasing attentions as a promising solution to solve the problems existing in the conventional battery packs and associated battery management systems, such as low energy efficiency, short pack …

Diffractive Propagation And Recovery Of Modulated (Including Chaotic) Electromagnetic Waves Through Uniform Atmosphere And Modified Von Karman Phase Turbulence, Monish Ranjan Chatterjee, Fathi H.A. Mohamed

Electrical and Computer Engineering Faculty Publications

In a parallel approach to recently-used transfer function formalism, a study involving diffraction of modulated electromagnetic (EM) waves through uniform and phase-turbulent atmospheres is reported in this paper. Specifically, the input wave is treated as a modulated optical carrier, represented by use of a sinusoidal phasor with a slowly timevarying envelope. Using phasors and (spatial) Fourier transforms, the complex phasor wave is transmitted across a uniform or turbulent medium using the Kirchhoff-Fresnel integral and the random phase screen.

Some preliminary results are presented comparing non-chaotic and chaotic information transmission through turbulence, outlining possible improvement in performance utilizing the robust features …

Differential Tilt Variance Effects Of Turbulence In Imagery: Comparing Simulation With Theory, Daniel A. Lemaster, Russell C. Hardie, Szymon Gladysz, Matthew D. Howard, Michael Armand Rucci, Matthew E. Trippel, Jonathan D. Power, Barry K. Karch

Electrical and Computer Engineering Faculty Publications

Differential tilt variance is a useful metric for interpreting the distorting effects of turbulence in incoherent imaging systems. In this paper, we compare the theoretical model of differential tilt variance to simulations. Simulation is based on a Monte Carlo wave optics approach with split step propagation. Results show that the simulation closely matches theory. The results also show that care must be taken when selecting a method to estimate tilts.

A Comparison Of American, Norwegian, And Russian Standards In Calculating The Wall Thickness Of Submarine Gas Pipeline, Cindy Dianita, Tatyana Vladimirovna Dmitrieva

Makara Journal of Technology

One of the key issues in the pipeline design is wall thickness calculation. This paper highlights a comparison of wall thickness calculation methods of submarine gas pipeline based on Norwegian Standard (DNV-OS-F101), Indonesian Standard SNI 3474 which refers to American Standard (ASME B31.8), and Russian Standard (VN39-1.9-005-98). A calculation of wall thickness for a submarine gas pipeline in Indonesia (pressure 12 MPa, external diameter 668 mm) gives the results of 18.2 mm (VN39-1.9-005-98), 16 mm (ASME B31.8), and 13.5 mm (DNV-OS-F101).The design formula of hoop stress due to internal pressure is interpreted in different ways for every standard. Only Norwegian …

Large-Area Object Search And Recovery Using Sector-Based Aerial Acousto-Optic Scanning And Reflection Sensing, Monish Ranjan Chatterjee, Salaheddeen G. Bugoffa

Electrical and Computer Engineering Faculty Publications

A sector-based angular scanning system intended to identify and spatially locate relatively small objects scattered over a large terrain is described in this paper. The system is modeled as a planar surface on the horizontal (XY) plane, with an acousto-optic Bragg cell on board an unmanned aerial vehicle (UAV) operating in the XZ plane.

The Bragg cell is excited by a chirped RF signal with a designed frequency ramp. As the scanning beam reflects off the horizontal surface, a detector placed strategically at a suitable altitude (in the analysis shown to be on board the UAV itself) picks up the …

Texture Analysis Using The Neutron Diffraction Method On The Non Standardized Austenitic Steel Process By Machining,Annealing, And Rolling, Tri Hardi Priyanto, Parikin Parikin, Meijuan Li

Makara Journal of Technology

Austenitic steel is one type of stainless steel which is widely used in the industry. Many studies on austenitic stainless steel have been performed to determine the physical properties using various types of equipment and methods. In this study, the neutron diffraction method is used to characterize the materials which have been made from minerals extracted from the mines in Indonesia. The materials consist of a granular ferro-scrap, nickel, ferro-chrome, ferro-manganese, and ferro-silicon added with a little titanium. Characterization of the materials was carried out in three processes, namely: machining, annealing, and rolling. Experimental results obtained from the machining process …

Thermal Properties, Crystallinity, And Oxygen Permeability Of Na-Montmorillonite Reinforced Plasticized Poly(Lactic Acid) Film, Kurniawan Yuniarto, Yohanes Aris Purwanto, Setyo Purwanto, Bruce A. Welt, Hadi Karia Purwadaria, Titi Candra Sunarti

Makara Journal of Technology

Introducing unmodified organically clay/Na-montmorillonite (Na-MMT) was applied into plasticized poly(lactic acid) PLA to produce film composites by direct casting. Film composite structure, the crystallinity degree and form, and thermal properties were carried out using X-ray diffraction and differential scanning calorimetry. The effect of Na- MMT to the tortuous path and the crystallinity degree in the plasticized film composites were calculated in oxygen barrier properties. Chromatogram film composites resulted in an intercalated structure that showed peak diffraction angle shift at about 0.2o. Then, a peak diffraction pattern was indicated in α-form crystal structure. Plasticized PLA has a crystallinity degree at 34%, …

Residual Strength Analysisof Asymmetrically Damaged Ship Hull Girderusing Beam Finite Element Method, Muhammad Zubair Muis Alie

Makara Journal of Technology

The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method is used for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4) and a three-cargo-hold model of a single-side Panamax Bulk Carrier in hogging and sagging conditions. The Smith’s method is adopted and implemented into Beam Finite Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the cross section and three-cargo-hold model. As …

Maneuverability Of Ships With Small Draught In Steady Wind, Daeng Paroka, Andi Haris Muhammad, Syamsul Asri

Makara Journal of Technology

Wind force and moment may force a ship to drastically decrease its speed and use a large drift angle as well as a large rudder angle in order to maintain its course. Ships with a small draught might have more risk in maneuvering to its point of view compared with a ship with a larger draught. This paper discusses maneuverability of a ship with a small draught in steady wind. The effect of wind on ship speed, drift angle, and rudder angle are investigated in a steady state condition. Five different ratios of wind velocity to ship speed from 1.0 …

Discrete Power Control In Heterogenous Networks, Yuanyuan Wang, Wibowo Hardjawana, Branka Vucetic

Makara Journal of Technology

In heterogeneous networks (HetNets) where femtocell base stations (FBSs) are deployed within the radio coverage of macrocell base stations (MBSs) to increase network capacity, co-channel interference limits overall system performance with universal frequency reuse. This paper investigates new distributed downlink discrete power control scheme for FBSs in HetNets with FBSs cooperation. The objective of the proposed power control scheme is to maximize the number of simultaneous FBSs transmissions in a single transmission wireless channel where each FBS is allowed to transmit only if the signal-to-interference-noise ratio (SINR) requirements for both FBSs and MBS users are satisfied. We apply a stochastic …

Multi-Project Scheduling Cost Optimization In A Machine Manufacturer Engineer-To-Order, Farizal Farizal, Amar Rachman, Tifani Tandean, Sumarsono Sudarto, Katsuhiko Takahashi

Makara Journal of Technology

This paper discusses the utilization of mixed integer linear programming (MILP) model to optimize cost for multiproject scheduling in a machine maker company. The objective is to minimize total project’s penalty cost and labor cost. The model formulated shows how to achieve the objective i.e. whether to use outsourcing or overtime to finish all projects. The model of multi-project scheduling was solved by Branch & Bound algorithm coded in Lingo 14.0 software. The case study shows that if a company wants to minimize lateness, it should use overtime instead of outsourcing, which minimize total lateness of projects by 144 days …

Analysis Of Arm Movement Prediction By Using The Electroencephalography Signal, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko, Lidwina Ayu Andarini, Achmad Furqon Idrus

Makara Journal of Technology

Various technological approaches have been developed in order to help those people who are unfortunate enough to be afflicted with different types of paralysis which limit them in performing their daily life activities independently. One of the proposed technologies is the Brain-Computer Interface (BCI). The BCI system uses electroencephalography (EEG) which is generated by the subject’s mental activity as input, and converts it into commands. Some previous experiments have shown the capability of the BCI system to predict the movement intention before the actual movement is onset. Thus research has predicted the movement by discriminating between data in the “rest” …

Introduction To Atomic Requirements, William L. Honig

Computer Science: Faculty Publications and Other Works

An introduction to requirements and the importance of making single atomic requirements statements. Atomic requirements have advantages and improve the requirements process, support requirement verification and validation, enable traceability, support testability of systems, and provide management advantages.

Why has there been so little emphasis on atomic requirements?

Deformable Contour Models For Digitizing A Printed Brainstem Atlas, Nirmal J. Patel

Electrical & Computer Engineering Theses & Dissertations

The brainstem is a part of the brain that is connected to the cerebrum and the spinal cord. Ten out of twelve pairs of cranial nerves emerge from the brainstem. The cranial nerves transmit information between the brain and various parts of the body. Due to its anatomical and physiological relevance, a descriptive digital brainstem is important for neurosurgery planning and simulation. For both of these neurosurgical applications, the complexity of the brainstem requires a digital atlas approach to segmentation that maps intensities to tissues rather than less descriptive voxel or surface-based approaches. However, a descriptive brainstem atlas with adequate …

Integrating Nanosphere Lithography In Device Fabrication, Tod V. Laurvick, Ronald A. Coutu Jr., Robert A. Lake

Electrical and Computer Engineering Faculty Research and Publications

This paper discusses the integration of nanosphere lithography (NSL) with other fabrication techniques, allowing for nano-scaled features to be realized within larger microelectromechanical system (MEMS) based devices. Nanosphere self-patterning methods have been researched for over three decades, but typically not for use as a lithography process. Only recently has progress been made towards integrating many of the best practices from these publications and determining a process that yields large areas of coverage, with repeatability and enabled a process for precise placement of nanospheres relative to other features. Discussed are two of the more common self-patterning methods used in NSL (i.e. …

A New Architecture For Application-Aware Cognitive Multihop Wireless Networks, Trenton Evans, Kossivi Tossou, Feng Ye, Zhihui Shu, Yi Qian, Yaoqing Yang, Hamid Sharif

Electrical and Computer Engineering Faculty Publications

In this article, we propose a new architecture for AC-MWN. Cognitive radio is a technique to adaptively use the spectrum so that the resource can be used more efficiently in a low-cost way. A multihop wireless network can be deployed quickly and flexibly without fixed infrastructure. In our proposed new architecture, we study backbone routing schemes with network cognition, and a routing scheme with network coding and spectrum adaptation. A testbed is implemented to test the proposed schemes for AC-MWN. In addition to basic measurements, we implement a video streaming application based on the proposed AC-MWN architecture using cognitive radios. …

A Cyber Forensics Needs Analysis Survey: Revisiting The Domain's Needs A Decade Later, Vikram S. Harichandran, Frank Breitinger, Ibrahim Baggili, Andrew Marrington

Electrical & Computer Engineering and Computer Science Faculty Publications

The number of successful cyber attacks continues to increase, threatening financial and personal security worldwide. Cyber/digital forensics is undergoing a paradigm shift in which evidence is frequently massive in size, demands live acquisition, and may be insufficient to convict a criminal residing in another legal jurisdiction. This paper presents the findings of the first broad needs analysis survey in cyber forensics in nearly a decade, aimed at obtaining an updated consensus of professional attitudes in order to optimize resource allocation and to prioritize problems and possible solutions more efficiently. Results from the 99 respondents gave compelling testimony that the following …

Requirements Quick Notes, William L. Honig, Shingo Takada

Computer Science: Faculty Publications and Other Works

A short introduction to requirements and their role in system development. Includes industry definition of requirements, overview of basic requirements process including numbering of requirements, ties to testing, and traceability. An introduction to requirements quality attributes (correct, unambiguous, etc.) Includes references to requirements process, numbering, and quality papers.

Requirements Metrics - Definitions Of A Working List Of Possible Metrics For Requirements Quality, William L. Honig

Computer Science: Faculty Publications and Other Works

A work in progress to define a metrics set for requirements. Metrics are defined that apply to either the entire requirements set (requirements document as a whole) or individual atomic (or singular, individual) requirements statements. Requirements are identified with standard names and a identification scheme and include both subjective and objective measures.

An example metric for the full set of requirements: Rd2 - Requirements Consistency, Is the set of atomic requirements internally consistent, with no contradictions, no duplication between individual requirements? An example of a metric for a single requirement: Ra4 - Requirement Verifiability, How adequately can this requirement be …