Transportation Engineering Commons^™

Lime Stabilization Of Pavement Subgrade Soils Of Section Aa-19 Of The Alexandria-Ashland Highway, Tommy C. Hopkins, David L. Allen

Kentucky Transportation Center Research Report

The purposes of this study were to evaluate the effects of hydrated lime on the soils from Section AA-19 of the Alexandria-Ashland Highway and determine if the engineering properties of the soils from Section AA-19 could be improved by lime stabilization. Soil samples used in the study were obtained by· the Kentucky Transportation Research Program on March 25, 1986. Three bag samples were collected from Section AA-19 (Lewis County, Kentucky) of the Alexandria-Ashland Highway, Stations 1630 (Sample A), 1495 (Sample B), and 1675+50 (Sample C), respectively. Based on a review of the geology of Section AA-19, the three sampling sites …

Manual On Bridge/Culvert Maintenance, Gary W. Sharpe, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

The basic objective of this course is to provide background (introductory) technical information that will aid the manager of bridge/culvert installations. In most instances, information presented may not be sufficiently complete for the student to perform the required work. However, the intent is more to familiarize than to instruct In many instances, professional engineering and experienced labor are necessary to ensure successful completion of tasks. Once the local official responsible for bridges and culverts has completed this workshop, he should have a basic understanding of

• the most common bridges/culverts encountered in counties and municipalities,
• the major components of common bridge/culvert …

Thickness Design Curves For Asphaltic Concrete On A 4-Inch Layer Of Dense-Graded Aggregate, Or On 6, 9, Or 12 Inches Of Stabilized Soil, Or For Maximum Utilization Of Dense-Graded Aggregate, Herbert F. Southgate

Kentucky Transportation Center Research Report

No abstract provided.

Effects Of Load Distributions And Axle And Tire Configurations On Pavement Fatigue, Herbert F. Southgate, Robert C. Deen

Kentucky Transportation Center Research Report

Damage factor relationships for axle and tire configurations are presented. Adjustment factors are provided to account for variations in load distributions within axle groups, distances between axles of a tandem, and variations in tire pressure for both dual and flotation tires.

Properly accounting for accumulated fatigue of a pavement requires a traffic volume, proportions of vehicle styles (classifications) within the of service, estimate of the average damage factor for each classification, reasonable measure of traffic stream, dates and estimates of tire contact pressures.

All adjustment factors presented are based on analyses of a limited number of structures and should be …

Use Of Nondestructive Testing To Prevent Failures Of In-Service Metal Bridges, Theodore Hopwood Ii, Robert C. Deen

Kentucky Transportation Center Research Report

The failure of metal bridges, subject to in-service fracture problems mainly caused by fatigue, may be prevented or minimized by performance of periodic nondestructive testing. Attendant factors that justify funding for such inspections include the potential for bridge failure, the consequences of bridge collapse, risk analyses, and inspection strategies. Factors that affect structural integrity include structural design, construction quality, and service loadings.

Details of a computer/strain-gage system capable of obtaining strain-gage data from critical structural elements are described. Data are processed to determine the stress-range distribution, number of stress cycles, resolved mean stress range, need for structural inspection, critical crack …

Documentation For 1986 Weight-Distance Tax Analyses Using Lotus 1-2-3, Herbert F. Southgate

Kentucky Transportation Center Research Report

No abstract provided.

Evaluation Of A Full-Depth Asphaltic Concrete Pavement, Herbert F. Southgate, Gary W. Sharpe, Mark Anderson

Kentucky Transportation Center Research Report

This study was initiated to verify a newly-developed set of design curves for full-depth asphaltic concrete pavements. Quality control during construction was checked using nuclear density testers, Benkelman beams, and a Road Rater. During the course of this study, an analysis system (predicated upon the elastic theory model) was developed to interpret the dynamic deflections as measured by the Road Rater. The thickness design curves were verified by elastic theory and deflection testing within the accuracy of construction variations.

Measured rut depths were analyzed in terms of potential rut depth resulting from consolidation under traffic due to lack of obtaining …

Workshop On Roadway And Street Drainage, Ronald D. Hughes, David L. Allen

Kentucky Transportation Center Research Report

No abstract provided.

Comparison Of Contained Rock Asphalt Mat (Cram) With Conventional Asphaltic Concrete Pavements, Herbert F. Southgate, David L. Allen, Robert C. Deen

Kentucky Transportation Center Research Report

A brochure proposing the use of "Contained Rock Asphalt Mat" (CRAM) provided a comparison of stress distributions throughout a CRAM structure (Figure 1) as compared to a conventional pavement (Figure 2). Experience has indicated that stress distributions do not always present the most sensitive or appropriate analysis of a pavement structure. Distributions of strains, and more particularly "work", are better indicators of load distributions throughout a pavement structure and subsequent performance.

Nondestructive Evaluation Of Rigid Pavements Using Road Rater Deflections [1984], Gary W. Sharpe, Mark Anderson, Robert C. Deen, Herbert F. Southgate

Kentucky Transportation Center Research Report

Road Rater deflections have been used to determine in-place structural conditions of rigid and composite pavements, based on modifications of principles and experience with the structural evaluation of flexible pavements. Details of the use of elastic layer theory to simulate deflection measurements associated with loadings for the Kentucky Road Rater are presented. Included is an illustration of the use of field deflection measurements to "back calculate'" in-place moduli. The procedures are generally iterative and involve matching measured deflections with theoretical deflections. Elastic layer principles have been used to simulate deflections only at the midslab position. Relationships regarding deflections at other …

Pavement Thickness Designs Utilizing Low-Strength (Pozzolanic) Base And Subbase Materials, Gary W. Sharpe, Robert C. Deen, Herbert F. Southgate, Mark Anderson

Kentucky Transportation Center Research Report

This paper presents information whereby laboratory test data for pozzolanic base and subbase materials may be combined with elastic layer theory and a limiting strain criterion to determine thickness designs equivalent to conventional asphaltic concrete and crushed stone pavement structures. A summary of laboratory testing in Kentucky also is presented. An example thickness design determination is presented and includes an economic comparison of alternative designs with the conventional asphaltic – crushed stone thickness design.

An Evaluation Of Pavement Drainage Interstate 64, Rowan-Carter Counties, David L. Allen, Herbert F. Southgate

Kentucky Transportation Center Research Report

No abstract provided.

An Evaluation Of Elastizell Concrete As A Lightweight Fill Material, David L. Allen, Bobby W. Meade

Kentucky Transportation Center Research Report

Near Northern Kentucky University in Campbell County, Kentucky, access ramps connecting I 275 and 3-Mile Road (shown in Figure 1) were constructed. During construction of those ramps, additional embankments were to be placed on an existing 6-foot by 5-foot box culvert. Both ramps, hereafter referred to as NKU-1 (the exit ramp from I 275) and NKU-2 (the entrance ramp to I 275), cross the culvert. The new embankments would result in fill heights, over the culvert of 30 feet at Station 39+14 of NKU-1 (Figure 2) and 47 feet at Station 11+68 of NKU-2 (Figure 3). The original fill height …

Thickness Design Procedure For Portland Cement Concrete Pavements, Herbert F. Southgate, Robert C. Deen

Kentucky Transportation Center Research Report

Past experience in Kentucky indicated that thickness designs using portland cement concrete best agreed with criterion used in the Portland Cement Association's design method for 2 or 3 million EAL's or less. For EAL's greater than 3 million, past experience best agreed with criterion developed from the AASHO Road Test.

Research reported herein indicates the two criteria become asymptotic at approximately 2.5 million EAL's. The merger of the criteria is presented, and the combined criterion is coupled with the principal of equal work as defined in classical physics to produce thickness design curves for portland cement concrete pavements. Research has …

A Field And Laboratory Compaction Study Of A Mixture Of Retorted And Raw Oil Shale From The Means Project In Montgomery County, David L. Allen, Bobby W. Meade

Kentucky Transportation Center Research Report

The oil shale retorting process will produce large volumes of spent shale and some raw oil shale that cannot he used in the retorting process. Consequently, it is anticipated that on-site disposal embankments will be constructed using these materials A report by Drnevich, et al. (1) has recommended that site-specific compaction studies be done at the start up of a mining and disposal operation. Holtz 12) has reported on a detailed study of the compaction characteristics of a western oil shale that had been retorted by the Paraho vertical retort process.

This study was performed to develop background data on …

Rutting, A Case Study (Us 23, 1.5 Miles North Of Louisa), James H. Havens, Gary W. Sharpe, David L. Allen, Herbert F. Southgate

Kentucky Transportation Center Research Report

This case study of rutting in an asphaltic concrete pavement makes recourse to trenching full width and full depth to expose and observe the entire cross section of the structure. Rutting occurred in the vicinity of Station 59+00 on US 23, 1.5 miles north of Louisa, during August and September 1983 when traffic was diverted onto newly constructed northbound lanes (without final surface and shouldering) while excavation into the hillside was completed for the southbound lanes. Earth movers crossed the northbound lanes going to and from a waste area. Coal trucks (Figures 1 and 2) slowed, stopped, and crept where …

Engineering Properties Of Overburden Materials For The Means Project, Vincent P. Drnevich, David L. Allen, Tommy C. Hopkins

Kentucky Transportation Center Research Report

A geotechnical investigation was performed to determine the physical properties (classification) and engineering properties of the overburden material from a proposed oil shale mining site in Montgomery County (Means Project). Three overburden materials were received in sealed meal drums and were labeled Nancy Member, Borden Formation; Clay City Bed, Farmers Member, Borden Formation; and Henley bed, Farmers Member, Borden Formation. Hereafter, they will be referred to as the Nancy, Clay City and Henley, respectively. the various types of geotechnical laboratory tests performed on these materials are listed in Table 1.

Review Of Pertinent Contract Documents Tennessee-Tombigbee Waterway Divide Cut Section 3a, Ronald D. Hughes, Robert C. Deen, David L. Allen, Tommy C. Hopkins

Kentucky Transportation Center Research Report

During construction of a portion of the Tombigbee Canal near Corinth, Mississippi, southward from Pickwick Lake (Station 13,118+00 to 13,337+50), the Contractor reported various problems, which he termed "differing site conditions." Some of the items considered as problems by the Contractor were: the amount of cherty Paleozoic material was far less than he expected or anticipated, there were deep deposits of bluish muck, the alluvial was not sufficiently stable to place in 1-foot lifts, excessively wet materials made it necessary to shift equipment frequently, the equipment had to travel over bad roads, and the materials had no bearing strength.

Strain Energy Analysis Of Pavement Designs For Heavy Trucks, Herbert F. Southgate, Robert C. Deen, Jesse G. Mayes

Kentucky Transportation Center Research Report

The first portion of this paper summarizes classical concepts of work, or strain energy, as applied to the analysis of stresses, strains, and deflections under various vehicular load configurations on pavement systems. Controlling equations for strain energy density are presented. When considering strain energy density, strain energy, or work, all components of stresses or strains must be taken into account so that total internal behavior can be evaluated. Previously, pavement thickness design systems have been developed using only a single component of strain, typically at the bottom of the asphaltic concrete layer or at the top of the subgrade. Strain …

Effects Of Construction Variations Upon Dynamic Moduli Of Asphaltic Concrete, Herbert F. Southgate

Kentucky Transportation Center Research Report

The two variables that most influence the behavior of asphaltic concrete pavements are subgrade modulus and thickness of the asphaltic concrete. Other significant variables are: temperature of the asphaltic concrete, asphaltic concrete modulus, frequency of the dynamic loading, asphalt content by weight in mix, and voids in the asphaltic concrete mix.

During a series of Road Rater tests on a experimental pavement in Kentucky, deflection test data varied widely from expected values. Test data reported by Kallas and Riley permitted the development of an equation relating asphaltic concrete modulus to its temperature and to the frequency of loading. However, after …

Mechanical Properties Of Kentucky Oil Shales As Related To Mine Design Application, Tom F. Fudge Jr., David L. Allen, Tommy C. Hopkins

Kentucky Transportation Center Research Report

To develop oil shales as an alternate energy resource, it will be necessary to develop appropriate mining techniques. In this regard, the mechanical properties of the ore must be determined. Section I of this paper presents data from a laboratory study to determine these properties. Uniaxial compression tests, longitudinal frequency tests, indirect tensile tests, and triaxial tests were performed. Section II uses data from section I to design an example underground mine. Strength properties are considered in the design of roof spans and pillars. It is concluded that underground mining of Kentucky oil shale is feasible with a possible extraction …

Engineering Properties Of Kentucky Oil Shales, Vincent P. Drnevich, Tommy C. Hopkins, David L. Allen, Samuel S. Hale

Kentucky Transportation Center Research Report

Excavation, handling, and the environmentally safe disposal of spent oil shale and overburden materials require a knowledge of their geotechnical engineering properties. To determine these properties a laboratory investigation of the physical and geotechnical engineering properties was made. The physical tests consisted of mechanical analyses, Atterberg Limits, and specific gravity determinations. Geotechnical properties were determined by moisture-density analyses, triaxial compression, permeability tests, slake-durability, one-dimensional compression tests, and Los Angeles abrasion. A one-dimensional compression test was devised to address the problem of placement, loading, and saturation of the spent shales and overburden materials. The compacted, unprocessed oil shales were more susceptible …

Warrants For Left-Turn Lanes, Kenneth R. Agent

Kentucky Transportation Center Research Report

Warrants for the installation of separate left-turn lanes were developed. Literature was reviewed, and policies and practices in other states were surveyed. Accident analyses of locations with and without separate left-turn lanes were conducted. Computer simulation was used to determine relationships among traffic delay, load factor, traffic volume, percent left-turns, cycle length, and cycle split. The relationship between left-turn accidents and conflicts was investigated.

Warrants were developed involving the following three general areas:

1. accident experience,
2. volumes (based on delay), and
3. traffic conflicts.

Deflection And Evaluation Of Flexible Pavements For Design Of Overlays, Herbert F. Southgate, Gary W. Sharpe, Robert C. Deen

Kentucky Transportation Center Research Report

Personnel from the University of Kentucky Transportation Research Program (KTRP) were requested by the Tennessee Transportation Center to conduct a demonstration project concerning the collection and use of deflection data (Road Rater) for evaluation of the existing condition of flexible pavements for use in overlay design. The demonstration project involved using the Road Rater to collect deflection data on specific pavement sections selected by the Tennessee Department of Transportation (TDOT). Deflection data were evaluated in a way that provides input parameters for an overlay design procedure (see Appendix A). The Kentucky overlay design procedure was used to make recommendations concerning …

Mechanical & Engineering Properties Of A Cherty Paleozoic Material, Robert C. Deen, David L. Allen, Tommy C. Hopkins

Kentucky Transportation Center Research Report

The Divide Cut Section 3A of the Tennessee-Tombigbee Waterway is located in Tishomingo County, Mississippi. Construction of this portion of the canal required the excavation of a cherty residuum. This material (hereafter referred to as cherty Paleozoic material) is a member of the Fort Payne Formation, of the Mississippian Period, of the Paleozoic era. The purpose of this study was to determine the mechanical and engineering properties of the material, including its abrasiveness. Also, the mineralogy of the material was to be determined and a particular effort was made to determine if the material could be classified as Tripoli.

On …

Triaxial Compression And Permeability Tests On Dense Graded Aggregate, David L. Allen

Kentucky Transportation Center Research Report

Fifty-six dense-graded aggregate samples of crushed limestone were received from the Division of Materials. Triaxial tests and permeability tests were to be performed.

The samples were obtained from seven sources with four gradations (fine, medium, coarse, and gap) from each source and two samples of each gradation. One of the samples of each gradation was to be compacted by standard compactive effort (AASHTO T-99) and the other at modified compactive effort (AASHTO T-180). The seven sources and their identification codes are as follows:

1. Martin - Marietta (59)
2. Hopkinsville Stone (150)
3. Nally - Hayden (112)
4. Harrod - Carter (51)
5. Reed Crushed …

Correlation Of Road Rater And Benkelman Beam Deflections, Robert C. Deen, Gary W. Sharpe, Herbert F. Southgate

Kentucky Transportation Center Research Report

The Benkelman beam is commonly used to measure surace deflections of highway and airfield pavements. The Benkelman beam is based on a simple lever-arm principal and uses dial guages to measure surface deflections under an applied axleload. The Road Rater is an electro-hydraulic testing device that applies a sinusoidal force to the pavement at a fixed amplitude and frequency: surface wave velocities are measured and electronically integrated to obtain surface deflections. Road Rater and Benkelman beam deflections have been successfully simulated using elastic theory and the Chevron N-layer computer program. The analyses presented in this paper illustrate relationships between Road …

Pavement Testing -- Before And After An Overlay, Herbert F. Southgate, Gary W. Sharpe, Robert C. Deen

Kentucky Transportation Center Research Report

A pavement scheduled for an overlay of 76 mm (3 inches) of asphaltic concrete on one half the project and 178 mm (7 inches) on the other half was tested and evaluated at two sites for each thickness of overlay. Precise elevations were obtained on 0.305-m (1-foot) intervals across the pavement. The Road Rater and Benkelman beam were used to determine the in-place behavior of the pavement before and after construction of the overlay. Prior to placement of the overlay, the pavements were cured to determine actual layer thicknesses, and in-place CBR tests were performed to determine actual subgrade conditions. …

Implementation Of Road Rater Deflection Testing For Pavement Evaluation And Overlay Design, Gary W. Sharpe, Herbert F. Southgate, Robert C. Deen

Kentucky Transportation Center Research Report

Road Rater deflection data were used to estimate the in-place subgrade strength and the in-place structural capacity of existing pavements. Pavement behavior can be expressed in terms of a reduced thickness of "reference" quality paving materials or as a reduced modulus of elasticity for the constructed thickness of asphaltic concrete. Mathematical relationships were developed making it possible to "program" the evaluation procedure (in modular form) for use with small hand calculators or minicomputers.

The pavement evaluation method has been successfully implemented in making recommendations for overlay designs for several pavement sections. Road Rater deflection data were used to estimate the …

Interstate Safety Improvement Program, Jerry G. Pigman, Kenneth R. Agent, Charles V. Zegeer

Kentucky Transportation Center Research Report

The purpose of this paper was to prepare prioritized rankings of recommended improvements which could implemented for the Interstate Safety Improvement Program in Kentucky. Considerable detail is presented which documents analysis procedures used to determine sites, sections, and elements of the roadway in need of improvement. The average number of accidents per interchange, bridge, 1.6-km (1.0-mile) section, and 0.48-km (0.3-mile) spots were summarized for large urban, medium urban, and rural sections of the interstate system. At specified levels of statistical significance, critical numbers of accidents and critical accident rates were calculated to assist in identifying high-accident locations. A limited field …