Transportation Engineering Commons^™

Vehicle Sensing And Communications Using Led Headlights To Enhance The Performance Of Intelligent Transportation Systems: Proof Of Concept, Implementation, And Applications, Sabit Ekin, Samir Ahmed

Data

Corresponding data set for Tran-SET Project No. 18ITSOKS01. Abstract of the final report is stated below for reference:

"This project investigates the use of vehicle light-emitting diode (LED) headlamp devices for improving the accuracy and reliability of traffic (sensing and communication) data measurements required for developing effective intelligent transportation systems (ITS) technologies and solutions.

Vehicular communication and sensing technologies are mainly based on conventional radio frequency (RF) or laser technologies. These systems suffer from several issues such as RF interference and poor performance in scenarios where the incidence angle between the speed detector and the vehicle is rapidly varying. Introducing …

Smart Charging Of Future Electric Vehicles Using Roadway Infrastructure, Sara Ahmed, Ethan Ahn, Mahmoud Reda Taha, Samer Dessouky, Moneeb Genedy, Daniel Fernandez, Ann Sebestian, Patience Raby

Data

Corresponding data set for Tran-SET Project No. 18ITSTSA03. Abstract of the final report is stated below for reference:

"Inspired by the fact that there is an immense amount of renewable energy sources available on the roadways such as mechanical pressure and frictional heat, this study presented the development and implementation of an innovative charging technique for future electric vehicles (EVs) by fully utilizing the existing roadways and the state-of-the-art nanotechnology and power electronics. The project introduced a novel wireless charging system, SIC (Smart Illuminative Charging), that uses LEDs powered by piezoelectric nanomaterials as the energy transmitter source and thin film …

Smart Charging Of Future Electric Vehicles Using Roadway Infrastructure, Sara Ahmed, Ethan Ahn, Mahmoud Reda Taha, Samer Dessouky, Moneeb Genedy, Daniel Fernandez, Ann Sebestian, Patience Raby

Publications

Inspired by the fact that there is an immense amount of renewable energy sources available on the roadways such as mechanical pressure and frictional heat, this study presented the development and implementation of an innovative charging technique for future electric vehicles (EVs) by fully utilizing the existing roadways and the state-of-the-art nanotechnology and power electronics. The project introduced a novel wireless charging system, SIC (Smart Illuminative Charging), that uses LEDs powered by piezoelectric nanomaterials as the energy transmitter source and thin film solar panels placed at the bottom of the EVs as the receiver, which is then poised to deliver …

Vehicle Sensing And Communications Using Led Headlights To Enhance The Performance Of Intelligent Transportation Systems: Proof Of Concept, Implementation, And Applications, Sabit Ekin, Samir Ahmed

Publications

This project investigates the use of vehicle light-emitting diode (LED) headlamp devices for improving the accuracy and reliability of traffic (sensing and communication) data measurements required for developing effective intelligent transportation systems (ITS) technologies and solutions. Vehicular communication and sensing technologies are mainly based on conventional radio frequency (RF) or laser technologies. These systems suffer from several issues such as RF interference and poor performance in scenarios where the incidence angle between the speed detector and the vehicle is rapidly varying. Introducing a new sensing technology will add diversity to these systems and enhance the reliability of the real-time data. …

A Traffic-Aware Approach For Enabling Unmanned Aerial Vehicles (Uavs) In Smart City Scenarios, Hesham El-Sayed, Moumena Chaqfa, Sherali Zeadally, Deepak Puthal

Information Science Faculty Publications

In smart cities, vehicular applications require high computation capabilities and low-latency communication. Edge computing offers promising solutions for addressing these requirements because of several features, such as geo-distribution, mobility, low latency, heterogeneity, and support for real-time interactions. To employ network edges, existing fixed roadside units can be equipped with edge computing servers. Nevertheless, there are situations where additional infrastructure units are required to handle temporary high traffic loads during public events, unexpected weather conditions, or extreme traffic congestion. In such cases, the use of flying roadside units are carried by unmanned aerial vehicles (UAVs), which provide the required infrastructure for …

Variable Speed Limit Control At Sag Curves Through Connected Vehicles: Implications Of Alternative Communications And Sensing Technologies, Reza Vatani Nezafat

Civil & Environmental Engineering Theses & Dissertations

Connected vehicles (CVs) will enable new applications to improve traffic flow. This study’s focus is to investigate how potential implementation of variable speed limit (VSL) through different types of communication and sensing technologies on CVs may improve traffic flow at a sag curve. At sag curves, the gradient changes from negative to positive values which causes a reduction in the roadway capacity and congestion. A VSL algorithm is developed and implemented in a simulation environment for controlling the inflow of vehicles to a sag curve on a freeway to minimize delays and increase throughput. Both vehicle-to-vehicle (V2V) and infrastructure-to-vehicle (I2V) …

Ua66/9/1 Ogden College Of Science & Engineering Engineering Administration, Wku Archives

WKU Archives Collection Inventories

No abstract provided.

Modelling Transport Of Nitrogen Compounds In Geita Wetland Along Mtakuja River, Ezrael Masawe

Tanzania Journal of Engineering and Technology (TJET)

The impacts of excessive nitrogen loading to streams in a watershed occur in the receiving waters such as rivers at the outlet of the watershed. To quantify the impacts of land use and management practices on the nitrogen loading at the watershed outlet, simulation models are needed that can both predict the nitrogen loading at the edge of individual fields and predict the fate of nitrogen as it moves through the river network to the watershed outlet. This paper presents the results of a model analysis for describing the processes governing transformations and transport of nitrogen compounds (NO3-N and NH4-N) …

Designing And Testing 3-D Printed Wafer-Box With Embedded Pzt Sensors To Identify The Shape Effect On Energy Harvesting, Ahmad Jami Safayet

College of Graduate Studies: Theses & Dissertations

Piezoelectric energy has been recently paid attention in the field of alternative energy. Day by day the traditional energy sources including Coal tar and oils are becoming scarce. People are heading to an alternative energy source to meet the future energy demand. Piezoelectric energy is one of the competitive energy sources compared to the conventional renewable energy sources including solar, wind, and geothermal power and so on. This energy production method bears enormous research potential because it can be used as the roadway for a new method of power generation. This research project aimed to identify which shaped wafer-box produced …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …

Introduction To Signal Timing & Traffic Control, Sarah V. Hernandez, Mariah Crew, Karla Diaz-Corro, Taslima Akter

Civil Engineering Teaching and Learning

The purpose of these lesson plans is to introduce students to traffic signalization basics. Students will be lead through a series of mini-lectures on traffic control and signalization including a discussion on the limitations and benefits of traffic signalization. The lesson plans compliment a computer simulation “game” in which students act as manual operators for a single up to four by four gridded intersection. Students attempt to control the progression of signals to understand the relationship between signal timing and user delay. Through experimentation with the simulation, students generate a presentation discussing the benefits and drawbacks of signal timing and …

Estimating Transit Ridership Patterns Through Automated Data Collection Technology: A Case Study In San Luis Obispo, California, Ashley Kim

Master's Theses

Public transportation offers a crucial solution to the travel demand in light of national and global economic, energy, and environmental challenges. If implemented effectively, public transit offers an affordable, convenient, and sustainable transportation mode. Implementation of new technologies for information-harvesting may lead to more effective transit operations. This study examines the potential of automated data collection technologies to analyzing and understand the origin-destination flow patterns, which is essential for transit route planning and stop location placement.

This thesis investigates the collection and analysis of data of passengers onboard San Luis Obispo Transit buses in February and March 2017 using Bluetooth …

Transportation Engineering: Traffic Control Simulator, Sarah V. Hernandez, Karla Diaz-Corro, Taslima Akter, Magdalena Asborno, Fu Durandal

Civil Engineering Teaching and Learning

The purpose of these lesson plans is to introduce students to traffic signalization basics. Students will be lead through a series of mini-lectures on traffic control and signalization including a discussion on the limitations and benefits of traffic signalization. The lesson plans compliment a computer simulation “game” in which students act as manual operators for a single up to four by four gridded intersection. Students attempt to control the progression of signals to understand the relationship between signal timing and user delay. Through experimentation with the simulation, students generate a presentation discussing the benefits and drawbacks of signal timing and …

Identification, Calculation And Warning Of Horizontal Curves For Low-Volume Two-Lane Roadways Using Smartphone Sensors, Shaohu Zhang

Electronic Theses and Dissertations

Smartphones and other portable personal devices that integrate global positioning systems, Bluetooth Low Energy, and advanced computing technologies have become more accessible due to affordable prices, product innovation, and people’s desire to be connected. As more people own these devices, there are greater opportunities for data acquisition in Intelligent Transportation Systems, and for vehicle-to-infrastructure communication. Horizontal curves are a common factor in the number of observed roadway crashes. Identifying locations and geometric characteristics of the horizontal curves plays a critical role in crash prediction and prevention, and timely curve warnings save lives. However, most states in the US face a …

Development Of A Novel Kalman Filter Bank Predictor To Optimally Schedule The Renewable Energy Contribution Within A Micro-Grid, Conor Lynch

Theses

This PhD thesis presents a novel Kalman Filter Bank (KFB) methodology. The novel KFB is applied to predict and optimally schedule the operation of micro-grid energy resources with a public fixed-grid connection and an auxiliary battery storage backup facility. This methodology relies on a sliding single time step forecast projection to accurately acquire the anticipated schedule for a range of time dependent parameters, stochastic by nature, that have inherent embedded cyclical patterns. The innovative feature here consists of a novel bank of hourly adjacent Kalman Filter estimators, which operate in synchronism, for accurate parameter prediction over a selected time horizon. …

State-Of-The-Art Review Of Cathodic Protection For Reinforced Concrete Structures, Aimee Byrne, Niall Holmes, Brian Norton

Articles

Cathodic protection (CP) limits the corrosion of a metal surface by making it the cathode of an electrochemical cell. This can be achieved either by using a more active sacrificial anode to create a driving current, or by using inert anodes and impressing a current onto the cathode surface using an external direct current (DC) source. Impressed current cathodic protection (ICCP) is preferred where widespread protection is required, particularly in reinforced concrete structures. ICCP needs a constant DC power supply that is usually provided through a grid connection or independent generators. This paper presents the currently available CP systems for …

Impact Of Optimally Minimizing Delay Times On Safety At Signalized Intersections In Urban Areas, Case Study: The City Of Virginia Beach, Eugene Vida Maina, Albert Forde, R. Michael Robinson

VMASC Publications

Optimally minimizing delay times at signalized intersections can significantly improve both traffic flow and safety. However, most traffic flow optimizing tools do not measure the effect on safety. This study uses nonlinear programming (NLP) algorithms to optimally minimize delay times and employs both Safety performance functions (SPFs) and empirical Bayes (EB) before-after methodology to measure the impact on safety presented as a Crash Modification Factor (CMF). A crash modification factor (CMF) is a multiplicative factor used by transportation practitioners to compute the expected number of crashes at specific study site(s) after a countermeasure has been proposed or is implemented. Using …

Scene Projection By Non-Linear Transforms To A Geo-Referenced Map For Situational Awareness, Kevin C. Krucki, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

There are many transportation and surveillance cameras currently in use in major cities that are close to the ground and show scenes from a perspective point of view. It can be difficult to follow an object of interest across multiple cameras if many of these cameras are in the same area due to the different orientations of these cameras. This is especially true when compared to wide area aerial surveillance (WAAS).

To correct this problem, this research provides a method to non-linearly transform current camera perspective views into real world coordinates that can be placed on a map. Using a …

Counting And Classification Of Highway Vehicles By Regression Analysis, Mingpei Liang, Xinyu Huang, Chung-Hao Chen, Alade Tokuta

Electrical & Computer Engineering Faculty Publications

In this paper, we describe a novel algorithm that counts and classifies highway vehicles based on regression analysis. This algorithm requires no explicit segmentation or tracking of individual vehicles, which is usually an important part of many existing algorithms. Therefore, this algorithm is particularly useful when there are severe occlusions or vehicle resolution is low, in which extracted features are highly unreliable. There are mainly two contributions in our proposed algorithm. First, a warping method is developed to detect the foreground segments that contain unclassified vehicles. The common used modeling and tracking (e.g., Kalman filtering) of individual vehicles are not …

Camera Viewpoint Invariant Vehicular Traffic Segmentation And Classification, Jeffrey B. Flora

Electrical & Computer Engineering Theses & Dissertations

The goal of this intelligent transportation systems work is to develop a computer vision method that is view angle independent for segmenting and classifying vehicular traffic on highway systems. In order to achieve this goal, this work implements an algorithm for vehicle segmentation, feature extraction, and classification using the existing Virginia Department of Transportation (VDOT) infrastructure on networked traffic cameras. The VDOT traffic video is analyzed for vehicle detection and segmentation using an adaptive Gaussian mixture model algorithm. Speed estimation is performed using a single camera calibration. Size and shape features from morphological properties and texture features from histogram of …

Solving The Vehicle Re-Identification Problem By Using Neural Networks, Tanweer Rashid

Computational Modeling & Simulation Engineering Theses & Dissertations

Vehicle re-identification is the process by which vehicle attributes measured at one point on a road network are compared to vehicle attributes measured at another point in an effort to match vehicles without using any unique identifiers such as license plate numbers. A match is made if the two measurements are estimated to belong to the same vehicle. Vehicle attributes can be sensor readings such as loop induction signatures, or they can also be actual vehicle characteristics such as length, weight, number of axles, etc. This research makes use of vehicle length, travel time, axle spacing and axle weights for …

The Influence Of Branches In The Performance Of Power-Line Communication Systems That Use Mc-Coma With Reed Solomon Coding, Emmanuel Felix

Tanzania Journal of Engineering and Technology (TJET)

Power-line network is proposed as an infrastructure for Information and Communications Technologies (ICTs)
services provision. However, there are a number of factors that contribute greatly to power-line communication performance degradation. These include number of branches that can be added or removed from the power- line network, lengths of the branch lines, loading etc. It has been pointed out that the number of branches is one of the factors that affects power-line performance to a certain extent. In this paper the influence of number of branches on the performance of Broadband Power-line communication (BPLC) that uses MC- CDMA modulation scheme with …

Implementation Requirements For The Notice Architecture In Vehicular Communications, Dusadee Treeumnuk

Electrical & Computer Engineering Theses & Dissertations

Many studies have been focusing on Vehicular Ad-Hoc Networking (VANET) in order to increase the quality of traffic and life on the road. An important aspect in vehicular communications is maintaining the privacy and security of VANET. NOTICE is an emerging architecture promising efficient traffic notification as well as strong immunity to malicious attacks, leading to improvement of safety and reduction of traffic congestion on roadways. To enable secure traffic notification, the NOTICE system employs vehicle-to-infrastructure (V2I) communication rather than vehicle-to-vehicle (V2V) communication like in traditional VANET. The infrastructure consists of sensor belts which are embedded in the roadway and …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …