Transportation Engineering Commons^™

Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew Mckenna, David Woodward

Research and Innovation - Articles

A problem increasingly faced by airport authorities is the maintenance of runways. Due to their large aircraft loadings associated with take-off and landing operations, runways experience surface deterioration. Poor quality runway surfaces cannot be tolerated in such an environment. Maintenance issues must be carried out to maximise safety and minimise the risk of aircraft damage. A recent development has been the introduction of self-healing technologies such as rejuvenator encapsulation, induction and microwave heating to address these issues. This paper summarises a laboratory investigation to determine the effectiveness of microwave self-healing for crack repair of Porous Friction Course (PFC) used for …

Final Design Review: Mascoma River Greenway Extension, Sebastian Strong, Sarah Atac, Eleanor Dowd, David Ruiz, Isalys Quiñones

ENGS 89/90 Reports

This report outlines current conditions surrounding the extension of the Mascoma River Greenway (MRG) to downtown West Lebanon, NH and recommends a route to completion. Included in the report are maps detailing potential route alignments and recommendations based on outside research and interviews with numerous stakeholders, Lebanon City officials, and community members. The report is intended to provide context and updated insight into the present and future of the MRG, following in the spirit of the 2010 MRG Action Plan, a document that created a vision for redevelopment of the Northern rail corridor and motivated stakeholders to move the project …

The Influence Of Asphalt Ageing On Induction Healing Effect On Porous Asphalt Concrete, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Induction healing is a proven technology which is able to improve the self‐healing capacity of asphalt concrete. Healing is achieved via electromagnetic current produced by passing induction machine, where steel asphalt constituents heat up which in turn soften the bitumen in the asphalt layer, allowing it to flow and close cracks, repairing the damage. This paper reports on the study which investigated the influence of ageing on the healing capacity of Porous Asphalt (PA) concrete. Porous Asphalt concrete mix was prepared first, then subjected to an accelerated (laboratory) ageing process using a ventilated oven. In order to further evaluate the …

Optimization Of The Calcium Alginate Capsules For Self-Healing Asphalt, Shi Xu, Amir Tabakovic, Xueyan Liu, Damian Palin, Erik Schlangen

Research and Innovation - Articles

Featured Application: This self-healing technology for asphalt pavements has the potential to greatly disrupt asphalt production methods (which have been stable over the past 100 years).This paper presents a development process of ‘calcium-alginate microcapsules encapsulating an asphalt bitumen rejuvenator’. The encapsulated rejuvenator is released when required (on demand) which rejuvenates the aged binder. Once crack is initiated and starts propagating it encounters a microcapsule, energy at tip of the crack opens the microcapsule, releasing the rejuvenator (healing agent). The rejuvenator will infuse into the aged binder soften it, allowing to flow, two broken edges to get into a contact and …

Long-Term Durability Of Frp Bond In The Midwest United States For Externally-Strengthened Bridge Components, Sasan Siavashi, Christopher D. Eamon, Abdel A. Makkawy, Hwai-Chung Wu

Civil and Environmental Engineering Faculty Research Publications

In this study, the bond strength of a typical FRP system subjected to long-term natural weathering in the Midwest United States is experimentally investigated, and the rate of degradation is estimated. To do this, the bond strength of an FRP system exposed to over fifteen years of weathering is determined with pull-off testing, and a relationship between strength reduction and exposure time is developed using regression analysis. For unweathered specimens, it was found that the attachment strength of the FRP system was governed by the concrete substrate, while for weathered specimens, the FRP system could detach by either a failure …

Improving Traffic Safety At School Zones By Engineering And Operational Countermeasures, Md Hasibur Rahman

Electronic Theses and Dissertations

Safety issues at school zone areas have been one of the most important topics in the traffic safety field. Although many studies have evaluated the effectiveness of various traffic control devices (e.g., sign, flashing beacon, speed monitoring display), there is a lack of studies exploring different roadway countermeasures and the relationship between school-related factors and crashes. In this study, the most crash-prone school zone was identified in Orange and Seminole Counties, Florida, based on crash rate. Afterward, a microsimulation network was built in VISSIM environment to test different roadway countermeasures in the school zones. Three different countermeasures: two-step speed reduction …

Arterial-Level Real-Time Safety Evaluation In The Context Of Proactive Traffic Management, Jinghui Yuan

Electronic Theses and Dissertations

In the context of pro-active traffic management, real-time safety evaluation is one of the most important components. Previous studies on real-time safety analysis mainly focused on freeways, seldom on arterials. With the advancement of sensing technologies and smart city initiative, more and more real-time traffic data sources are available on arterials, which enables us to evaluate the real-time crash risk on arterials. However, there exist substantial differences between arterials and freeways in terms of traffic flow characteristics, data availability, and even crash mechanism. Therefore, this study aims to deeply evaluate the real-time crash risk on arterials from multiple aspects by …

Assessing Pedestrian Safety Conditions On Campus, Morgan Morris

Electronic Theses and Dissertations

Pedestrian-related crashes are a significant safety issue in the United States and cause considerable amounts of deaths and economic cost. Pedestrian safety is an issue that must be uniquely evaluated in a college campus, where pedestrian volumes are dense. The objective of this research is to identify issues at specific locations around UCF and suggest solutions for improvement. To address this problem, a survey that identifies pedestrian safety issues and locations is distributed to UCF students and staff, and an evaluation of drivers reactions to pedestrian to vehicle (P2V) warning systems is studied through the use of a NADS MiniSim …

Assessing The Safety And Operational Benefits Of Connected And Automated Vehicles: Application On Different Roadways, Weather, And Traffic Conditions, Md Sharikur Rahman

Electronic Theses and Dissertations

Connected and automated vehicle (CAV) technologies have recently drawn an increasing attention from governments, vehicle manufacturers, and researchers. Connected vehicle (CV) technologies provide real-time information about the surrounding traffic condition (i.e., position, speed, acceleration) and the traffic management center's decisions. The CV technologies improve the safety by increasing driver situational awareness and reducing crashes through vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I). Vehicle platooning with CV technologies is another key element of the future transportation systems which helps to simultaneously enhance traffic operations and safety. CV technologies can also further increase the efficiency and reliability of automated vehicles (AV) by collecting real-time …

E-Construction Technologies For Efficient Highway Construction Inspections, Dhaivat Patel

Theses and Dissertations--Civil Engineering

Over recent years, organizations such as the Federal Highway Administration and Departments of Transportation across the United States have showed interest in automating highway construction processes. The addition of e-Construction and other advanced technologies can significantly improve the efficiency and safety of highway paving operations, specifically paving inspections. Activities such as collecting load tickets, tracking pavement lay-down temperatures, and monitoring roller movement are antiquated practices that DOT inspectors perform during paving operations. E-Ticketing, Paver Mounted Thermal Profiling, and Intelligent Compaction were proposed to automate paving inspections and were recently tested in two resurfacing pilot projects in the state of Kentucky. …

Basic Turbo Roundabouts As An Alternative To Conventional Double-Lane Roundabouts: Operational Performance Evaluation, Zuhair Elhassy

Electronic Theses and Dissertations

Conventional roundabouts have been prevalent worldwide since the emergence of modern roundabouts in 1966. An innovative design of multilane roundabouts known as turbo roundabouts, however, has been recently introduced as an alternative to conventional multilane roundabouts. Due to several reasons, there has been no general consensus on the operational performance of turbo roundabouts throughout the world. Nationwide, turbo roundabouts have yet to be part of roadway systems, but there is an ongoing project expected to be finished in early 2020. Therefore, this dissertation aims to evaluate the operational performance of a widespread variant of turbo roundabouts, namely basic turbo roundabouts, …

Synthesis Of Fault Traces In Se Louisiana Relative To Infrastructure, David Culpepper, Elizabeth Chinn Mcdade, Nancye Dawers, Mark Kulp, Rui Zhang

Data

Corresponding data set for Tran-SET Project No. 17GTLSU12. Abstract of the final report is stated below for reference:

"Geological faulting has been implicated as a contributor to subsidence, coastal land-loss and submergence of marshlands in southern Louisiana. This report reviews whether fault motion, either by slow creep or more sudden slip, can cause deformation of engineered structures resulting in increased infrastructure maintenance and repair costs. The impact of surface, or near-surface, geologic faulting on critical infrastructure is insufficiently documented in southeastern Louisiana, but the state has a vast amount of energy-sector subsurface data that to date has been under-utilized for …

Field And Numerical Study For Deteriorating Precast Double-Tee Girder Bridges, Brian Kidd

Electronic Theses and Dissertations

Two deteriorating DT bridges in South Dakota, both over 30-years old, were field tested with a static and dynamic load. From the recorded strain values, the liveload distribution factors (LLDFs) and dynamic load allowance (IM) factors were calculated. The AASHTO LRFD and AASHTO Standard Specifications were compared with the field LLDFs and IMs. It was determined that the AASHTO LRFD Specifications were conservative for deteriorating DT girder bridges, with two exceptions. The AASHTO Standard codified LLDFs were significantly higher than the field LLDFs in all cases. The AASHTO LRFD and AASHTO Standard specifications were conservative when calculating the IM factors …

Validation Of The Highway Capacity Manual Urban Street Travel Time Reliability Methodology Using Empirical Data, Ernest Tufuor, Laurence Rilett

Mid-America Transportation Center: Final Reports and Technical Briefs

The 6th edition of the Highway Capacity Manual (HCM-6) includes the concept of travel time reliability (TTR), which attempts to determine the distribution of average trip travel times over an extended period. TTR is an inherent part of travelers’ route choice decisions and is used by traffic managers to better quantify operations rather than simply using average travel times. The focus of this paper is on the HCM-6 urban street TTR methodology contained in Chapter 17. The approach uses historical data (e.g., weather and volume fluctuations) and simple empirical data (e.g., 1-day volume count) to provide the user with average …

Redefining Construction “As-Built” Plans To Meet Current Kentucky Transportation Cabinet Needs, Victoria Lynn Lasley

Theses and Dissertations--Civil Engineering

As-built drawings are the traditional method used by the construction industry to record changes made during construction. As-builts provide valuable information for new design projects as well as rehabilitation and remediation projects. The completeness and accuracy of these plans are essential for transportation industries and their success. While the importance of as-builts is widely recognized, the process of creating them has proven to be difficult. It is a time consuming process and entities often lack the resources necessary to complete accurate and detailed as-builts. After an investigation of current as-built operations within State Transportation Agencies, recommendations have been made to …

An Assessment Of Historical Traffic Forecast Accuracy And Sources Of Forecast Error, Jawad Mahmud Hoque

Theses and Dissertations--Civil Engineering

Transportation infrastructure improvement projects are typically huge and have significant economic and environmental effects. Forecasts of demand of the facility in the form of traffic level help size the project as well as choose between several alternatives. Inaccuracy in these forecasts can thus have a great impact on the efficiency of the operational design and the benefits accrued from the project against the cost. Despite this understanding, evaluation of traffic forecast inaccuracy has been too few, especially for un-tolled roads in the United States. This study, part of a National Cooperative Highway Research Program (NCHRP) funded project, bridges this gap …

Adapting Crash Modification Factors For The Connected And Autonomous Vehicle Environment, Federico Valentin Lause Iii

Theses and Dissertations--Civil Engineering

The Crash Modification Factor (CMF) clearinghouse can be used to estimate benefits for specific highway safety countermeasures. It assists safety professionals in the allocation of investments. The clearinghouse contains over 7000 entries of which only 446 are categorized as intelligent transportation systems or advanced technology, but none directly address connected or autonomous vehicles (CAVs). Further, the effectiveness of highway safety countermeasures is assumed to remain constant over time, an assumption that is particularly problematic as new technologies are introduced. For example, for the existing fleet of human-driven vehicles, installation of rumble strip can potentially reduce “run-off-road” crashes by 40%. If …

Improving Bicycle Infrastructure With The Use Of Bicycle Share Travel Data, Jennifer Mintao Weast

Theses and Dissertations--Civil Engineering

Bicycling as a mode of transportation has been increasing in recent years due to its environmental and health benefits. The availability of bicycles through bicycle share programs has made bicycling a more viable option. With this increase, there is a need for complementary improvements of bicycle infrastructure. Many local and regional transportation agencies are recognizing this need and developing a master plan or safety action plan to improve the city’s bicycle and walking facilities. This study examines bicycle travel demands and travel patterns in Lexington, Kentucky as generated by SPIN bicycle share users. It is hypothesized that the SPIN users …

Investigation Of The Effect Of Vehicle Color On Safety, Deogratias Eustace, Fayez Khalaf Alanazi, Peter W. Hovey

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

No abstract provided.

Safety, Operational, And Design Analyses Of Managed Toll And Connected Vehicles' Lanes, Moatz Saad

Electronic Theses and Dissertations

Managed lanes (MLs) have been implemented as a vital strategy for traffic management and traffic safety improvement. The majority of previous studies involving MLs have explored a limited scope of the impact of the MLs segments as a whole, without considering the safety and operational effects of the access design. Also, there are limited studies that investigated the effect of connected vehicles (CVs) on managed lanes. Hence, this study has two main objectives: (1) the first objective is achieved by determining the optimal managed lanes access design, including accessibility level and weaving distance for an at-grade access design. (2) the …

Development Of Decision Support System For Active Traffic Management Systems Considering Travel Time Reliability, Whoibin Chung

Electronic Theses and Dissertations

As traffic problems on roadways have been increasing, active traffic management systems (ATM) using proactive traffic management concept have been deployed on freeways and arterials. The ATM aims to integrate and automate various traffic control strategies such as variable speed limits, queue warning, and ramp metering through a decision support system (DSS). Over the past decade, there have been many efforts to integrate freeways and arterials for the efficient operation of roadway networks. It has been required that these systems should prove their effectiveness in terms of travel time reliability. Therefore, this study aims to develop a new concept of …

A System Dynamics Approach On Sustainability Assessment Of The United States Urban Commuter Transportation, Tolga Ercan

Electronic Theses and Dissertations

Transportation sector is one of the largest emission sources and is a cause for human health concern due to the high dependency on personal vehicle in the U.S. Transportation mode choice studies are currently limited to micro- and regional-level boundaries, lacking of presenting a complete picture of the issues, and the root causes associated with urban passenger transportation choices in the U.S. Hence, system dynamics modeling approach is utilized to capture complex causal relationships among the critical system parameters affecting alternative transportation mode choices in the U.S. as well as to identify possible policy areas to improve alternative transportation mode …

Developing A Traffic Safety Diagnostics System For Unmanned Aerial Vehicles Usingdeep Learning Algorithms, Ou Zheng

Electronic Theses and Dissertations

This thesis presents an automated traffic safety diagnostics solution using deep learning techniques to process traffic videos by Unmanned Aerial Vehicle (UAV). Mask R-CNN is employed to better detect vehicles in UAV videos after video stabilization. The vehicle trajectories are generated when tracking the detected vehicle by Channel and Spatial Reliability Tracking (CSRT) algorithm. During the detection process, missing vehicles could be tracked by the process of identifying stopped vehicles and comparing Intersect of Union (IOU) between the tracking results and the detection results. In addition, rotated bounding rectangles based on the pixel-to- pixel manner masks that are generated by …

Synthesis Of Fault Traces In Se Louisiana Relative To Infrastructure, David Culpepper, Elizabeth Chinn Mcdade, Nancye Dawers, Mark Kulp, Rui Zhang

Publications

Geological faulting has been implicated as a contributor to subsidence, coastal land-loss and submergence of marshlands in southern Louisiana. This report reviews whether fault motion, either by slow creep or more sudden slip, can cause deformation of engineered structures resulting in increased infrastructure maintenance and repair costs. The impact of surface, or near-surface, geologic faulting on critical infrastructure is insufficiently documented in southeastern Louisiana, but the state has a vast amount of energy-sector subsurface data that to date has been under-utilized for transportation and other near-surface engineering applications. Recent and on-going work by research groups at Tulane University, University of …

The Operational And Safety Effects Of Heavy Duty Vehicles Platooning, Ahmed Alzahrani

UNF Graduate Theses and Dissertations

Abstract

Although researchers have studied the effects of platooning, most of the work done so far has focused on fuel consumption. There are a few studies that have targeted the impact of platooning on the highway operations and safety. This thesis focuses on the impact of heavy-duty vehicles (HDVs) platooning on highway characteristics. Specifically, this study aims at evaluating the effects of platooning of HDVs on capacity, safety, and CO₂ emissions.

This study is based on a hypothetical model that was created using the VISSIM software. VISSIM is a powerful simulation software designed to mimic the field traffic flow …

An Analysis Of Hydroacoustic Transmission Loss Associated With Marine Pile Driving, Jonathan Paul Berube

UNF Graduate Theses and Dissertations

There has been a growing concern in recent years about the effects of anthropogenic noise due to marine pile driving on underwater wildlife. Current guidelines for mitigating hydroacoustic effects associated with these events are based upon relatively simple transmission loss formulations. The advantage to these guidelines is that computing transmission loss using their prescribed methods is not labor intensive, but their disadvantage is that they may not take all variables into account. Because of this, it may be possible to improve transmission loss computations. To better-characterize marine pile driving sound transmission loss, a unique in-water instrumentation system was developed. This …

Evaluating The Performance Of Cooperative Merging Assistance System For Aging Drivers, Flavius Matata

UNF Graduate Theses and Dissertations

Freeway merging maneuvers demand considerable attention by drivers and are among the more complex operations drivers must perform on freeways. Aging drivers, a growing population in the United States, face added challenges when merging. This study utilized Vissim models created in a previous study that modeled the behavior of aging drivers during freeway merging. An algorithm for Cooperative Merging Assistance System (CMAS) that utilizes Connected Vehicle (CV) technology was developed in this study. The Vissim models were created for two interchanges on I-75 in Fort Myers, Florida, each with different geometric characteristics. Acceleration lane lengths of 1000ft and 1500ft were …

Simulation Exploration Of The Potential Of Connected Vehicles In Mitigating Secondary Crashes, Mike Alvin Soloka

UNF Graduate Theses and Dissertations

Secondary crashes (SCs) on freeways are a major concern for traffic incident management systems. Studies have shown that their occurrence is significant and can lead to deterioration of traffic flow conditions on freeways in addition to injury and fatalities, albeit their magnitudes are relatively low when compared to primary crashes. Due to the limited nature of crash data in analyzing freeway SCs, surrogate measures provide an alternative for safety analysis for freeway analysis using conflict analysis. Connected Vehicles (CVs) have seen compelling technological advancements since the concept was introduced in the 1990s. In recent years, CVs have emerged as a …

Development Of Anti-Icing Airfield Heated Pavement Systems Using Solar Energy, Joseph Daniels

Graduate Theses and Dissertations

This dissertation analyzes developing and assessing the viability of an anti-icing airfield heated pavement system using solar energy. This study includes two components, a field experimentation component and a numerical analysis component. Field experimentation investigates two systems: (1) an electrical heated pavement system with a photovoltaic energy system as its power source, and (2) a hydronic heated pavement system with a solar water-heating system as its heating source. The systems operate under an automated thermostat heating sequence for operation optimization and energy conservation. Study results found the solar systems capable of supplying enough energy to maintain pavement surface temperature above …

Early Life Flexural Performance And Behavior Of Reinforced Bcsa Concrete Beams, Gabriel Cook

Graduate Theses and Dissertations

Belitic calcium sulfoaluminate cement (BCSA) is a hydraulic, rapid setting alternative to ordinary portland cement (OPC) with reduced energy demands and CO2 emissions. BCSA cement has numerous current and potential applications including transportation repair and precast manufacturing. Currently, limited research exists regarding the structural performance of CSA cements, restricting its potential implementation. Thus, the purpose of this research is to provide insight into the flexural performance and behavior of reinforced BCSA concrete beams. Overall, BCSA concrete had similar cracking and loading behavior to the OPC beams, with increased moment capacity for compression controlled specimens. Furthermore, BCSA concrete showed increased tensile …