Transportation Engineering Commons^™

Workforce Development Symposiums For Uhpc, Brad Weldon, Craig Newtson, Grace Mcmurry, Leticia Davila

Publications

Ultra-high performance concrete (UHPC) is a cementitious material with a dense microstructure that contributes to high compressive strengths as well as enhanced durability properties. UHPC also possesses significant post-cracking strength and ductility due to the addition of fibers. These characteristics produce a material that provides advantages over conventional concrete; however, high costs attributed to materials and production, lack of industry familiarity and knowledge, and the absence of standardized design procedures have impeded its widespread use. To help disseminate knowledge on UHPC, two workforce development symposiums on UHPC were held in Las Cruces, New Mexico. The symposiums consisted of presentations and …

Evaluation And Enhancement Of Carbon Sequestration Potential Of Existing Vegetation Along Roadsides, Vikram Kapoor, Jeffrey Hutchinson, Samer Dessouky

Publications

The objectives of this study were to evaluate the vegetative composition and carbon sequestration potential of vegetation along a major roadway in Texas. Soil and vegetation were evaluated along IH-35 within Bexar County for composition and carbon content. Three 20 m transects were placed at each site and percent vegetative cover was estimated and above ground plant biomass, and soil was collected from three 0.25 m2 subplots along each transect. Plant and soil samples were analyzed for carbon content. Two non-native grasses, bermudagrass and King Ranch bluestem, were the dominant cover at all sites accounting for > 90% coverage at several …

Development Of Metals Corrosion Maps Of Arkansas And Maintenance Of Cross-Drains, Zahid Hossain, Ashraf Elsayed, Mdariful Hasan

Publications

Corrosion potential of metallic structures in alluvial soils is governed by chemical and electromagnetic properties of the soils. Geotechnical engineers are generally more concerned about different types of soils and their physical and mechanical properties than the chemical aspects. The main objective of this study is to analyze the geotechnical, electrochemical and electromagnetic properties of soils in Arkansas. Important parameters (e.g., soil resistivity) related to corrosion potential of metal culverts have been predicted through neural network (NN) models. The developed NN models have been trained and verified by using laboratory test results of soil samples collected from Arkansas Department of …

Assessing The Impacts Of Super Storm Flooding In The Transportation Infrastructure – Case Study: San Antonio, Texas, Marcio Giacomoni, Francisco Olivera, Cesar Do Lago

Publications

Flooding are likely to increase worldwide due to climate change. Large storms, referred here as superstorms, defined as events with return period equal or larger than 100 years, can lead to an increase of property damages and loss of life. The ability to predict and plan for the impacts of superstorms on transportation infrastructure is key to mitigate future damages and losses. This study analyzed 51 combinations of future projections for representative concentration pathways (RCP) 4.5 and 8.5 scenarios, which were used to calculate future 1st and 3rd quartiles, median, minimum and maximum intensity-duration-frequency curves (IDF). A HEC-HMS and GSSHA …

Use Of Bagasse Ash As A Concrete Additive For Road Pavement Application, Gabriel Arce, Marwa Hassan, Maria Gutierrez, Michele Barbato

Publications

The objective of this study was to evaluate the use of sugarcane bagasse ash (SCBA) as a partial replacement of cement in concrete for road pavement application. The study explored the pozzolanic activity of SCBA produced from three different processing methodologies (i.e., raw SCBA, controlled SCBA and post-processed SCBA). The experimental results revealed that SCBA produced by the controlled burning of sugarcane bagasse fiber (SBF) at 650°C and grinding (C-650), presented the maximum pozzolanic activity. However, this SCBA production process was deemed challenging for large-scale industrial application due to low SCBA yield (i.e., 3 to 6%). On the other hand, …

Developing Implementable Climatic Input Data And Moisture Boundary Conditions For Pavement Analysis And Design, Rifat Bulut, Amir Hossein Javid

Publications

The main objective of this study is to develop a practical and implementable numerical model for predicting the moisture (suction) regime within the pavement subgrade system. The research quality and uniformly-dispersed climate data over short distances from Oklahoma Mesonet and the Mitchell based moisture (suction) prediction methods establish the main background of the research study. The study involved numerical modeling and statistical analysis of climatic weather data. The proposed moisture variation model predicts the suction distribution throughout the soil subgrade by solving the diffusion equation and incorporates the measured suction from the Oklahoma Mesonet to estimate the diffusion coefficient. The …

A Comprehensive Framework For Life-Cycle Cost Assessment Of Reinforced Concrete Bridge Decks, Mohamed Soliman, Samir Ahmed, Ligang Shen

Publications

Various environmental and mechanical stressors cause deterioration of concrete bridge decks. Normal wear and tear, freeze and thaw cycles, and chloride penetration due to deicing salts can cause aggressive deterioration that usually require frequent interventions during the life-cycle of the bridge. These interventions include deck maintenance and repairs (e.g., application of sealers or overlay placement) as well as bridge deck replacement. The quantification of the life-cycle cost of bridge decks considering maintenance and repair activities represents a significant challenge facing local and state transportation agencies. The life-cycle maintenance activities not only increase the direct life-cycle cost of the bridge, but …

Portable Roadway High Water Detection System For Driver Safety And Infrastructure Assessment, Hatim Sharif, Samer Dessouky

Publications

The state of Texas, local governments, and community groups are adopting several initiatives to address this problem. The main goal of this project is to develop an approach to enhance prediction and detection of roadway flooding and help efforts to prevent driving into flood roadways. The motivation of this work was initiated by the alarming number of vehicle related flood fatalities in Texas, mostly at low-water crossings. Texas leads the nation in the number of flood fatalities and about 77% of flood fatalities in Texas are motor vehicle-related. This percentage is much higher than the national percentage reported in several …

Disaster Resilient And Self-Assessing Multifunctional Transportation Structures, Ibrahim Karaman, Darren Hartl

Publications

This research designs and characterizes multifunctional materials, in particular inexpensive shape memory alloys, for transportation structures that possess excellent mechanical properties and self-sensing capabilities for strengthening and health monitoring. The properties are the Fe-SMAs are sensitive to part size in that the grain size of the material, which can be grown to several inches, should exceed the smallest dimension of the part. In the current work, maximum part size of the large dimension Fe-SMA rods were determined through detailed microstructural investigations. Samples were subjected to abnormal grain growth heat treatments and found out that part size be increased up to …

Structural Vulnerability Of Coastal Bridges Under Extreme Hurricane Conditions, Arturo Montoya, Adolfo Matamoros, Firat Testik, Reza Nasouri, Adnan Shahriar, Arsalan Majlesi

Publications

This work presents the results of a numerical study evaluating the response of coastal bridges due to hurricane-induced waves. The analyses were conducted using the Coupled Eulerian-Lagrangian (CEL) approach, available on the commercial finite element software Abaqus, which allows modeling the interaction between water and the bridge. The work concentrated on (1) establishing an approach for modeling the desired wave characteristics (i.e., wave height, and frequency) within the CEL simulation, (2) conducting simulations using actual bridge dimensions of historically damaged bridges, (3) analyzing a range of foundation flexibilities to determine its effect on the uplift and shear forces acting on …

Is Transportation Planning Effective? A Critical Review Of Long-Range Regional Transportation Planning In The United States, Razieh Nadafianshahamabadi

Civil Engineering ETDs

The Federal-Aid Highway Act requires urban areas with a population greater than 50,000 to create Metropolitan Planning Organizations (MPOs) to ensure that funding for transportation projects and programs are based on a continuing, cooperative, and comprehensive planning process. A major responsibility of each MPO is the creation of a long-range transportation plan (LRTP) that addresses the transportation needs of a metropolitan region over the next twenty years or more. While long-range regional transportation planning goals have grown to include a wide range of concerns and technical methods for evaluating planning scenarios have advanced substantially over the past 50 years, there …

Field Performance And Cost Effectiveness Of Crack Sealing In Flexible And Composite Pavements, Momen Ragab Mousa

LSU Doctoral Dissertations

Surface cracking is one of the major surface distresses in asphalt concrete (AC) pavement, allowing water infiltration through the cracks, causing stripping in asphalt pavement layers, and weakening and deteriorating the base and/or subgrade. Its treatment, therefore, is one of the major activities in pavement preservation for many state DOTs. Among the various treatment methods currently available to preserve AC pavement with existing surface cracking are various forms of crack sealing. Crack sealing is not a common practice to Louisiana highways since the benefit of such treatment appears to be affected by the elevation of the ground water table. Studies …

Analysis Of The Effects Of Adaptive Ramp Metering On Measures Of Efficiency With A Proposed Framework For Safety Evaluation, Jacky Loh

Master's Theses

Adaptive ramp metering (ARM) is a widely popular intelligent transportation system (ITS) tool that boasts the ability to reduce congestion and streamline traffic flow during peak hour periods while maintaining a lower implementation cost than traditional methods such as freeway widening. This thesis explores the effectiveness of ARM implementation on an 18 mile segment of the Interstate 80 (I-80) corridor in the Bay Area residing in northern California. Smaller segments of this particular segment were analyzed to determine the effective length of ARM on efficiency at various lengths originating from a known bottleneck location. Efficiency values were also compared against …

Development Of Traffic Live Load Models For Bridge Superstructure Rating With Rbdo And Best Selection Approach, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Reliability-based design optimization (RBDO) is frequently used to determine optimal structural geometry and material characteristics that can best meet performance goals while considering uncertainties. In this study, the effectiveness of RBDO to develop a rating load model for a set of bridge structures is explored, as well as the use of an alternate Best Selection procedure that requires substantially less computational effort. The specific problem investigated is the development of a vehicular load model for use in bridge rating, where the objective of the optimization is to minimize the variation in reliability index across different girder types and bridge geometries. …

A Comparative Study Of Insertion Loss Of Traffic Noise Barriers In Georgia, Pablo Giraldo, Jidong Yang

Master of Science in Civil Engineering Theses

In this paper, three types of traffic noise barriers, interlocking steel panels, precast concrete panels, and Paragon panel 23-T, were evaluated in terms of insertion loss. Field test was conducted for the noise barriers recently installed as part of the Northwest Express Project in Georgia. The noise insertion loss was measured as noise difference in A-weighted decibels (dBA) immediately before and after the barriers. The insertion loss was then evaluated by correlating with noise barrier types and other influential variables, including the separation distance of barriers from traffic, the level of traffic, wind speed, and pavement types. The results showed …

2019 05 6 Asce Golden Spike Ces W Eicholtz.Pdf, Michael Oconnor

Department of Civil and Environmental Engineering Faculty Publications

...

Applications Of Deep Learning Models For Traffic Prediction Problems, Rezaur Rahman

Electronic Theses and Dissertations

Deep learning coupled with existing sensors based multiresolution traffic data and future connected technologies has immense potential to improve traffic operation and management. But to deal with complex transportation problems, we need efficient modeling frameworks for deep learning models. In this study, we propose two different modeling frameworks using Deep Long Short-Term Memory Neural Network (LSTM NN) model to predict future traffic state (speed and signal queue length). In our first problem, we present a modeling framework using deep LSTM NN model to predict traffic speeds in freeways during regular traffic condition as well as under extreme traffic demand, such …

Structural Design Guidelines For Pervious Concrete Pavements, April Smith

Civil Engineering Undergraduate Honors Theses

Pervious pavements have gained popularity in recent years as the transportation industry focuses on sustainability and environmental impact. This research investigated the structural design of pervious concrete pavements. There is no standard design method; therefore, the goal was to lessen ambiguity surrounding the use of pervious concrete for pavement structures. By characterization of the rigid pavement design equation from the 1993 AASHTO Structural Design Guide for Design of Pavement Structures through laboratory exploration and review of existing literature, a guide was created to assist engineers in the design of pervious concrete pavements.

Restricted Crossing U-Turns At Rural Intersections, Timothy Adams

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This study examines the potential for replacing the standard intersection design at two-way stop control (TWSC) and all-way stop control (AWSC) intersections along rural highways with a roundabout or a restricted crossing u-turn (RCUT) facility. The geometry of the RCUT design prohibits left and through movements from the side road, and provides a u-turn location downstream from the main crossing. This type of facility has been implemented for rural highways extensively in other states and has the potential to serve as a cost-effective solution to improve roadway safety within Nebraska.

Comparative analysis is conducted for three site locations (Humphrey, Madison, …

Unl-Cc Outdoor Education Center Master Plan, Marie Wagner

Honors Program: Senior Projects (Public)

The following report contains the work done by the group Griswold Engineering in completion of the Senior Design requirements for Civil Engineering and the Honors Requirements of the Project Manager. As the project manager, my job was to organize the project as a whole and to work alongside the Structural Engineer on the project. One of the main problems to overcome was the division of labor amongst the group. The project was originally conceived as a group project with one project manager and five other students to serve as the project engineers in each subdiscipline. Since this group only had …

Laboratory Evaluation And Neural Network Modeling For Rotational Viscosity Of Reacted And Activated Rubber Modified Binders, Mayzan Isied

Civil Engineering Theses

Crumb rubber surface activation and pretreatment are considered as one of the promising newly introduced methods for asphalt rubber production. Reacted and Activated Rubber (RAR) is an elastomeric asphalt extender produced by the hot blending and activation of crumb rubber with asphalt and Activated Mineral Binder Stabilizer (AMBS). Besides RAR ability in enhancing the performance of asphaltic mixtures, its dry granulate industrial form enabled its addition directly into the mixture utilizing pugmill or the dryer drum with very minimal to no modification required on the plant level.

This study aims to evaluate the rotational viscosity of RAR modified binders and …

Save Our Sound Obx, Inc. V. North Carolina Department Of Transportation, Mitch L. Werbell V

Public Land & Resources Law Review

The Fourth Circuit Court of Appeals recently ruled in favor of several governmental agencies seeking to construct a new bridge in the Pamlico Sound adjacent to North Carolina’s Outer Banks. For years, state and federal agencies have put forth a massive coordinated effort to address the constant weather damage and erosion which occurs to a section of North Carolina Highway 12. The court found the agencies properly cleared NEPA’s environmental review requirements for the bridge’s construction. Additionally, the opponent-litigants’ efforts to add claims challenging the project, based on new information about a shipwreck in the bridge’s path, were futile.

Impacts Of Freight Consolidation And Truck Sharing On Freight Mobility, Tieming Liu, Chaoyue Zhao

Data

Corresponding data set for Tran-SET Project No. 17ITSOKS02. Abstract of the final report is stated below for reference:

"The trucking industry is an important sector of the U.S. economy. However, it is quite fragmented, hindering the efficiency of cargo transportation and the ability for small carriers to identify demands to fill full truck loads. The focus of this research is to study models and algorithms in order to aid online freight marketplaces to identify efficient consolidation strategies. To accomplish this aim, a new mixed integer programming model for the pickup and delivery problem has been developed. The model is geared …

Civil Engineering Design Of Cornhusker Council's Outdoor Education Center, Kelly Weiler

Honors Program: Senior Projects (Public)

A team of geotechnical, structural, hydraulic, environmental, and transportation experts collaborated to provide engineering solutions to the Cornhusker Council in an effort to solve the current problems facing their Outdoor Education Center. This results of this project provided the structural design of three bridges on the property, transportation plans for two parking lots and roadway design, geotechnical recommendations for soil testing and erosion prevention, and an environmental and hydraulic analysis of the property. A major challenge in the design of this project is the consideration of the dangers and regulations that accompany the floodway and floodplain regions on site. Various …

Impacts Of Freight Consolidation And Truck Sharing On Freight Mobility, Tieming Liu, Chaoyue Zhao

Publications

The trucking industry is an important sector of the U.S. economy. However, it is quite fragmented, hindering the efficiency of cargo transportation and the ability for small carriers to identify demands to fill full truck loads. The focus of this research is to study models and algorithms in order to aid online freight marketplaces to identify efficient consolidation strategies. To accomplish this aim, a new mixed integer programming model for the pickup and delivery problem has been developed. The model is geared towards identifying effective freight consolidation opportunities. A branch-and-cut algorithm to solve the model was also developed. The model …

Variable Speed Limit Control At Sag Curves Through Connected Vehicles: Implications Of Alternative Communications And Sensing Technologies, Reza Vatani Nezafat

Civil & Environmental Engineering Theses & Dissertations

Connected vehicles (CVs) will enable new applications to improve traffic flow. This study’s focus is to investigate how potential implementation of variable speed limit (VSL) through different types of communication and sensing technologies on CVs may improve traffic flow at a sag curve. At sag curves, the gradient changes from negative to positive values which causes a reduction in the roadway capacity and congestion. A VSL algorithm is developed and implemented in a simulation environment for controlling the inflow of vehicles to a sag curve on a freeway to minimize delays and increase throughput. Both vehicle-to-vehicle (V2V) and infrastructure-to-vehicle (I2V) …

Reliability-Based Shear Rating Of Prestressed Concrete Bridge Girders Considering Capacity Adjustment Factor, Alaa I. Chehab, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

In this study, the reliability of prestressed concrete (PC) bridge girders in the shear rating process is quantified, where the use of a simple procedure to enhance the accuracy of shear capacity evaluation for rating is evaluated. It was found that the approximate methods used in code-based procedures to develop shear resistance used for reliability calibration of the AASHTO Bridge Design Specifications and the Manual for Bridge Evaluation result in larger discrepancies in reliability than previously assumed, as well as substantially conservative shear capacity evaluation in most cases. To examine the effects of using a more accurate shear rating process, …

High Friction Surface Treatment Initiatives By Indot: Spec Development, Joseph Bruno

Purdue Road School

In-House Project Design, Special Provision Specification, and Initial Test Results—Highfriction surface treatment (HFST) has been proactively utilized as a cost-effective solution to reducing vehicle crashes at curves across the country. As an initiative, INDOT is currently installing HFST at 26 locations statewide, mainly horizontal curves with high crash rates. This session consists of two presentations to share the information on the development, expected benefits, project design, and initial test results based on the HFST at these locations.

Rough Roads Ahead!?, Sarah Reed, Brooke Thomas, Jim Hellmann

Purdue Road School

Have you ever found yourself in the public's cross-hairs when it is time to implement a few roadway improvements? Are you handicapped in your ability to describe the true value of community planning and economic development planning? Come hear from one dynamic trio with the ability to identify issues and opportunities that others might not see and work to uncover even more ways tin which we are better together.

Safety Improvements At Horizontal Curves, Joseph Bruno

Purdue Road School

This presentation highlights the progress INDOT has made in improving safety at horizontal curves by upgrading the signing and delineation and by applying high friction surface treatments at some locations. We will also discuss the MUTCD (Manual on Uniform Traffic Control Devices) requirements for signing horizontal curves and the approaching (December 31, 2019) FHWA target date for compliance.