Structural Engineering Commons^™

Analysis Of Electric Vehicle Charging Behavior Patterns With Function Principal Component Analysis Approach, Chenxi Chen, Yang Song, Xianbiao Hu, Ivan G. Guardiola

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This manuscript focused on analyzing electric vehicles’ (EV) charging behavior patterns with a functional data analysis (FDA) approach, with the goal of providing theoretical support to the EV infrastructure planning and regulation, as well as the power grid load management. 5-year real-world charging log data from a total of 455 charging stations in Kansas City, Missouri, was used. The focuses were placed on analyzing the daily usage occupancy variability, daily energy consumption variability, and station-level usage variability. Compared with the traditional discrete-based analysis models, the proposed FDA modeling approach had unique advantages in preserving the smooth function behavior of the …

Investigation Of Bolted Connections In Cold-Formed Steel Members Using Sae J429 Bolts, Babak Yeganeh, Cheng Yu

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The report presents a research project aimed at comparing ASTM and SAE J429 bolts. The research includes comparison of those two bolt standards in terms of tensile strength, chemical and mechanical properties, shanks length, head size, thread profile and bolt styles. The research shows that the overall dimension, tensile strength, head and shank size for both standards are the same and no considerable difference is observed.

Real Records Scaling Factors Optimization To Fit The Syrian Design Spectra Using Genetic Algorithm, Seraj Jdyd

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

After selecting real seismic records it is necessary to scale these records to match the intensity of the earthquake expected for the site. Generally, scaling can be made by ground motions uniform scaling in time domain which is simply scaled up or down the ground motions uniformly to best match (in average) the target spectrum within a period range of interest. It’s an engineer’s job to find the best scaling factors to best match the target spectrum, which is a complex task, so we employed the Genetic Algorithm (GA) in finding those scaling factors to achieve the best results.

Genetic …

The Provision Of Educational Needs Of The Old City Of Sana'a According To The Concept Of Sustainable Preservation, Ali Amer

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

The idea of sustainable development begun in the eighties of the 20th century, soon after, this concepts started to be use in different fields, including the preservation of historical cities, which known as sustainable preservation. Sustainable preservation cares about using the valuable cultural heritage to meet the modern needs of the historical cities as a way of continuously preserving the heritage, and to bring it to the next generations as good as possible.

The current lack of educational environment in the old city of Sanaa is one of the main dangers to preserve the authentically of the ancient city, especially …

Effect Of Pvdf-Ca Ratio On Electrospun Membrane For Water–Oil Filtration Application, Mohamad Haziq Alias, Izan Izwan Misnon, Rajan Jose

Makara Journal of Technology

Oil spillage and generation of industrial water–oil wastewater mixture ignite a focus on filtration technology. Electrospinning technique provides a versatile route in producing tunable diameter and pores in nanofiber filtration membrane development. In this work, polyvinylidene difluoride (PVDF) and cellulose acetate (CA) electrospun membrane at different concentration ratios were synthesized for water–oil filtration application. The polymeric solutions were characterized using viscometer and conductivity testing, whereas the membranes were analyzed using contact angle, tensile test, scanning electron microscopy (SEM), and filtration testing of oil (dichloromethane). Conductivity test showed a decreased conductivity along with decrement of CA ratio in the polymeric solution. …

Effect Of Landfill Leachates On Some Water Quality Indicators Of Selected Surface Water And Groundwater At Ilokun, Ado-Ekiti, Nigeria, Olorunwa Omofunmi, Adesola Satimehin, Abraham Oloye, Okwunna Umego

Makara Journal of Technology

This study was conducted to examine the impact of dumpsites on the quality of groundwater and surface water. The water samples and leachates were collected from dumpsites in respective zones. The physicochemical properties of the samples were examined and determined in accordance with the standards of the American Public Health Association. Results indicated that the groundwater and surface water that are close to the dumpsites have an electrical conductivity of 385 and 245 Sd/cm, total dissolved solids of 168 and 128 mg/L, a turbidity of 4.6 and 22 NTU, a total alkalinity of 103 and 50 mg/L, a total hardness …

Effect Of Catholyte Concentration On Current Production During Chocolate Industry Wastewater Treatment By A Microbial Fuel Cell, Diana Rahayuning Wulan, Suprihanto Notodarmojo

Makara Journal of Technology

Microbial fuel cells (MFCs) use bacteria as a catalyst to oxidize organic and/or inorganic substrates and produce electric currents. Wastewater could function as an electron donor in the anode chamber and, thus, represents a very promising energy source. Catholytes, as electron acceptors, influence power production in MFCs by increasing the availability of electrons. The present research aims to determine the influence of catholyte concentration on current production in an aerobic two-chamber MFC. Aerobic treatment was carried out in the two-chamber MFC operated in an incubator at 37  1 °C with and without aeration in the cathode chamber. Wastewater from …

Evaluation Of Il-17a And Il-17f Gene Expression In Peripheral Blood Mononuclear Cells In Different Clinical Stages Of Chronic Hepatitis B Infection In An Iranian Population, Tannaz Akbari Kolagar, Seyed Reza Mohebbi, Fatemeh Ashrafi, Shahrzad Shoraka, Hamid Asadzadeh Aghdaei, Mohammad Reza Zali

Makara Journal of Technology

Hepatitis B virus (HBV) infection is one of the main causes of liver damage, which can also lead to chronic hepatitis B (CHB) infection. More than 240 million individuals worldwide are chronic carriers of HBV. Among individuals with CHB who are untreated, approximately 15% – 40% will progress to liver cirrhosis or cancer. The interactions between HBV and host immune response play significant roles in the progression of CHB. CHB can be generally divided into four different clinical phases: immune tolerance (IT), immune clearance, inactive carrier, and Hepatitis B surface antigen (HBsAg)-negative reactivation phase (ENEG). Many studies showed that interleukins …

Redesign Of Product Packaging With Kansei Engineering: Empirical Study On Small-Medium Enterprises In Indonesia, Amalia Suzianti, A. Aldianto

Makara Journal of Technology

Small-medium enterprises (SMEs) in Indonesia have been proven to be one of the important pillars of the national economy. Unfortunately, some problems hinder their development, and one of the critical problems is the quality of product packaging. The packages of SME products are considered poor, dirty, and unattractive. Packaging problem is one of the factors why consumers are less interested in buying and why SME products always lose in the competition with other products. This study discusses how to employ Kansei engineering to design better SME product packaging with a focus on psychological (affective) aspects. This research concludes that there …

Microstrip Filters: A Review Of Different Filter Designs Used In Ultrawide Band Technology, Hussain Bohra, Giriraj Prajapati

Makara Journal of Technology

In this study, optimization techniques applied in designing microstrip bandpass ultra-wideband (UWB) filters are presented. Optimization based on various defected ground structure techniques, resonator designs, and type of dielectric materials is discussed. Microstrip bandpass filters implemented at UWB frequency bands used in wireless communication systems have key features to control frequency response in passband and stopband. Optimization techniques are studied to attain optimum performance of bandpass microstrip filters to ensure minimum insertion loss, high selectivity, compactness, sharp transitions at cut-off frequencies, high return loss, and excellent linearity. Extensive study shows that proper selection of fabrication techniques and type of material …

Performance-Shaping Factors Of Personnel Performing Evacuation And Escape On Offshore Installations In Tropical, Norafneeza Norazahar, Nur Azizah Arryanie Morshidi, Arshad Ahmad, Wijayanuddin Mohd Ali

Makara Journal of Technology

Performance-shaping factors (PSFs) are used to address the strengths and weaknesses of workers performing escape and evacuation activities. These PSFs are time, environmental factors as stressors, complexity of activities, experiences and training, interaction between workers and emergency equipment, workers’ physical conditions, and procedures. This paper presents a survey work on fitness for the duty of workers performing basic offshore survival and emergency response training. The training provides credible scenarios of escape and evacuation in case of an emergency of offshore installations in tropical waters. The survey is conducted among participants of the tropical basic offshore safety induction & emergency training …

Evaluation Of Anti-Aging Performance Of Biochar Modified Asphalt Binder, Wenhao Dong, Feng Ma, Chen Li, Zhen Fu, Yue Huang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As a renewable biomass resource, biochar is new to modify or replace asphalt binder in pavement engineering. This paper focuses on the effect of biochar on the anti-aging performance of asphalt binder. The short-and long-term aging properties of biochar modified asphalt binder were investigated using dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests. The modification mechanism was investigated through the Fourier-transform infrared spectroscopy (FTIR) test. The aging tests and viscosity analysis showed that the softening point of biochar modified asphalt binder was higher than base asphalt binder, while the aging index and aging viscosity ratio were lower than …

Risk Assessment Of Water Inrush Caused By Karst Cave In Tunnels Based On Reliability And Ga-Bp Neural Network, Zhaoyang Li, Yingchao Wang, C. Guney Olgun, Shengqi Yang, Qinglei Jiao, Mitian Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In order to evaluate the risk level of water inrush caused by karst cave accurately and effectively, a novel quantitative assessment model was established based on the reliability theory and genetic algorithm-back propagation (GA-BP) neural network. First, the reliability theory and the calculation formula of the minimum safe thickness were used to calculate the water inrush probability. Second, the GA-BP neural network was applied to predict the disaster consequence caused by water inrush. Six factors, including water pressure, hydraulic supply, type of gap, filling situation, degree of water enrichment and reserves of cave, were selected as the input layer of …

Detection Of Corrosion-Indicating Oxidation Product Colors In Steel Bridges Under Varying Illuminations, Shadows, And Wetting Conditions, Dayakar L. Naik, Hizb Ullah Sajid, Ravi Kiran, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Early detection of corrosion in steel bridges is essential for strategizing the mitigation of further corrosion damage. Although various image-based approaches are available in the literature for corrosion detection, most of these approaches are tested on images acquired under uniform natural daylight illuminations i.e., inherent variations in the ambient lighting conditions are ignored. Owing to the fact that varying natural daylight illuminations, shadows, water wetting, and oil wetting are unavoidable in real-world scenarios, it is important to devise a robust technique for corrosion identification. In the current study, four different color spaces namely ‘RGB’, ‘rgb’, ‘HSV’ and ‘CIE La*b*’ along …

Failure Sampling With Optimized Ensemble Approach For The Structural Reliability Analysis Of Complex Problems, Christopher Eamon, Kapil Patki, Ahmad Alsendi

Civil and Environmental Engineering Faculty Research Publications

Failure sampling is a structural reliability method based on modified conditional expectation suitable for complex problems for which reliability index-based approaches are inapplicable and simulation is needed. Such problems tend to have non-smooth limit state boundaries or are otherwise highly nonlinear. Previous studies recommended implementation of failure sampling with an extrapolation technique using Johnson's distribution or the generalized lambda distribution. However, what implementation method works best is problem dependent. The uncertainty of which approach provides best results for a particular problem limits the potential effectiveness of the method. In this study, a solution is proposed to this issue that eliminates …

Semi-Annual Progress Report #7, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Flexural Behaviour Of Over-Reinforced Concrete Beam Using External Steel Plate, Shatha Sahib Kareem

Student Works (2020-2029)

Over-reinforced concrete beam fails by crushing of the concrete compression zone before the yielding of steel reinforcement in the tension zone. An over-reinforced concrete beam may failed suddenly without warning before failure as the failure is instantaneous. Therefore, numerous codes of practices recommended a beam design to avoid brittle failure. However, in some situations, due to the limitation of spaces, using over-reinforced concrete beam is not avoidable. Previous researches showed that it is possible to design an over-reinforced concrete beam without brittle failure using the methods such as helical-reinforcement, short-stirrups, and hybrid-system. This study is an effort to investigate the …

Online Implementation Of Structural Analysis Tool For Remote Learning, Ghada El-Mahdy, Amany Micheal

Civil Engineering

The delivery of a structural analysis module to architectural or civil engineering students needs the visualization of certain diagrams, such as the internal force diagrams and the elastic line. These diagrams are difficult to grasp for students new to structural analysis and need a lot of practice to become proficient in drawing them. Current structural analysis textbooks with electronic platforms do not include tools to draw the internal force diagrams or deflection. This has led to the initiative of creating an online structural analysis tool to enable the student to easily apply different loadings on different statical systems to draw …

The Application Of Fuzzy Analytic Hierarchy Process In Sustainable Project Selection, Rakan Alyamani, Suzanna Long

Engineering Management and Systems Engineering Faculty Research & Creative Works

The project selection process is a crucial step in sustainable development. Effective sustainable development depends on the ability to select the appropriate sustainable project to implement to ensure that the desired goals are met. Some of the most common characteristics or criteria used in evaluating sustainable projects include novelty, uncertainty, skill and experience, technology information transfer, and project cost. Prioritizing these criteria based on relative importance helps project managers and decision makers identify elements that require additional attention, better allocate resources, as well as improve the selection process when evaluating different sustainable project alternatives. The aim of this research is …

Quantitative Evaluation Of Asphalt Binder Extraction From Hot Mix Asphalt Pavement Using Ashing And Centrifuge Methods, Ahmed Hemida, Magdy Abdelrahman, Eslam Deef-Allah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binder requires more investigation to be accurately and precisely extracted since it is a significant procedure for quality control quality assurance (QC/QA) and subsequent binder characterization. In this research, the authors provided a hands-on experience with binder extraction to deliver recommendations concerning the sensitive steps that may affect the outcomes (extracted binder content, P_be %). Based on the extraction by the centrifuge method, two mineral matter determination methods (ashing and centrifuge) were addressed. Field cores were investigated with comparing the P_be % to the actual binder content, P_ba %. Analysis of variance (ANOVA) and Tukey Post-Hoc …

Rheological And Component Characterization Of An Innovative Bio-Binder Using Guayule Resin In Partial And Entire Asphalt Replacement, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt cement will not last for a long time as the world encounters a diminishment in the crude oil. For sustainable, flexible pavement development, new resources can provide a contribution to replace it partially or entirely. In this study, asphalt was partially and entirely replaced by guayule resin as a bioresource by-product, extracted during the guayule natural rubber production. Crumb rubber modifier (CRM) was used as an asphalt enhancer. The Superpave grading system was followed at high, intermediate, and low temperatures to evaluate such innovative binder for rutting, fatigue, and thermal cracking, respectively, in addition to viscosity. Therefore, the original, …

Wind Hazard Resilient Construction Mitigation Decision-Making Using A Multi-Objective Optimization, Erin Gregory

Masters Theses & Specialist Projects

While storms worsen and damage to homes increases, limited information is available about mitigations that are effective in lessening damage to homes and/or buildings. Information on past storms exists within FEMA’s Hazus-MH application, but the information provided by the data within the Hazus-MH application, while very informative on its own, was decidedly more precise and useful when optimized to provide defined information to those responsible for determining building codes or regulations for homes.

The research available from Hazus-MH details results from past storms categorized by building type, mitigations, and intensity of disaster. The data can be used to simulate storm …

Utilization Of Lidar Technology To Assess Vertical Clearances Of Civil Infrastructure, Daniel Levi Mcintosh

Masters Theses & Specialist Projects

The issue of vertical clearances along highway systems impact the functionality of the road network. Extracting current routing clearances for each structure can be a challenging and hazardous task. Pavement changes and roadway rehabilitation projects can alter roadway geometry, complicating efforts to maintain accurate clearance databases. Vertical clearance measurements may vary from one lane to another beneath overhead structures and are often difficult to obtain due to high traffic volumes. Inherently, traditional methods that are used to obtain the measurements routinely impede the flow of traffic and subject workers to dangerous environments. This study will examine the use of a …

Dual Target Optimization Of Two-Dimensional Truss Using Cost Efficiency And Structural Reliability Sufficiency, Mohammad Rezaee, Seyed Hooman Ghasemi, Mansoureh Rezaee

Henry M. Rowan College of Engineering Departmental Research

The main contribution of this study is to open a discussion regarding the structural optimization associated with the cost efficiency and structural reliability sufficiency consideration. To do so, several various optimization approaches are investigated to deliberate both cost and reliability concerns. Particularly, particle swarm optimization is highlighted as a reliable optimization approach. Accordingly, an illustrative example is rendered to compare the feasibility of the considered optimization approaches. The feasibility of the investigated approaches is evaluated using the cost and reliability analysis. For the considered example, it was observed that the PSO optimization algorithm has multiple advantages such as easy realization, …

Rapid Repair Of Seismically Vulnerable Bridge Columns Following Earthquake Induced Damage, Gregory H. Norton

Civil and Environmental Engineering Master's Project Reports

The Cascadia Subduction Zone (CSZ) earthquake has a high probability of occurrence within our lifetime, threatening bridges across the Pacific Northwest. Damage is expected to be geographically spread throughout the region and will have a nearly simultaneous impact on transportation through several important corridors. While bridge repair and replacement will ultimately be needed, priority will be placed on resuming mobility such that repairs will need to be implemented quickly. In an effort to anticipate this need, a repair method is being developed for rapid repair with the goal of achieving semi-permanent installation that also considers the different bridge damage states …

Measuring Three-Dimensional Temperature Distributions In Steel-Concrete Composite Slabs Subjected To Fire Using Distributed Fiber Optic Sensors, Yi Bao, Matthew S. Hoehler, Christopher M. Smith, Matthew Bundy, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Detailed information about temperature distribution can be important to understand structural behavior in fire. This study develops a method to image three-dimensional temperature distributions in steel–concrete composite slabs using distributed fiber optic sensors. The feasibility of the method is explored using six 1.2 m × 0.9 m steel–concrete composite slabs instrumented with distributed sensors and thermocouples subjected to fire for over 3 h. Dense point clouds of temperature in the slabs were measured using the distributed sensors. The results show that the distributed sensors operated at material temperatures up to 960◦C with acceptable accuracy for many structural fire applications. The …

Benefits Of Including Sae Bolts, Nuts, And Washers In The Aisi Standard S100, Patrick Bodwell, Perry S. Green

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The addition of SAE J429 bolts along with their associated nuts and washers into the AISI STANDARD S100, North American Specification for the Design of Cold-Formed Members, would be a significant enhancement to the specification by providing practitioners the opportunity to use a broader range of fasteners for the design of cold-formed steel structures. The design of bolted connections using SAE J429 bolts would be advantageous for many types of structures including mechanical support structures, storage rack systems, photovoltaic support structures, carport structures, and conventional repetitive frame structures that all utilize cold-formed steel members. These structures would benefit by having …

Uav-Enabled Measurement For Spatial Magnetic Field Of Smart Rocks In Bridge Scour Monitoring, Genda Chen

INSPIRE Archived Webinars

This lecture will present an overview of the research, development, validation, and implementation of 'smart' rocks as in-situ agents to assist in remote monitoring of bridge scour in real time. It will start with a brief review of fundamental concepts such as magnet, polarization, magnetic field, and field measurement principle. It will then introduce the concept of ‘smart’ rocks, demonstrate it through small-scale laboratory tests, and design and fabricate gravity-controlled ‘smart’ rocks for field implementation based on river hydrodynamics and riverbed conditions. Next, a ‘smart’ rock localization optimization algorithm will be formulated analytically and validated experimentally in open fields. It …

Heterogenous Trip Distance-Based Route Choice Behavior Analysis Using Real-World Large-Scale Taxi Trajectory Data, Yajuan Deng, Meiye Li, Qing Tang, Renjie He, Xianbiao Hu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Most early research on route choice behavior analysis relied on the data collected from the stated preference survey or through small-scale experiments. This manuscript focused on the understanding of commuters' route choice behavior based on the massive amount of trajectory data collected from occupied taxicabs. The underlying assumption was that travel behavior of occupied taxi drivers can be considered as no different than the well-experienced commuters. To this end, the DBSCAN algorithm and Akaike information criterion (AIC) were first used to classify trips into different categories based on the trip length. Next, a total of 9 explanatory variables were defined …

Component Analysis Of Bio-Asphalt Binder Using Crumb Rubber Modifier And Guayule Resin As An Innovative Asphalt Replacer, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This research seeks to interpret the component analysis of an innovative bio-asphalt binder using guayule resin in addition to crumb rubber modifier (CRM) at high concentrations. Such asphalt modification aims to minimize the dependency on virgin asphalt binder and provide new solutions concerning sustainable, flexible pavement industry. Guayule resin is a promising bioresource for asphalt binder replacement. By now, it could be considered a no value byproduct extracted during the guayule natural rubber production. CRM is a recycled material derived from scrap tires. The provided interpretation could help in understanding the asphalt-rubber-guayule interaction mechanism. Fourier transform infrared spectroscopy (FTIR), supported …