Structural Engineering Commons^™

Inspire Newsletter Spring 2020, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Progressive Collapse Assessment Of Post-Tensioned Reinforced Concrete Flat Slab Structures Using Aem, Amgad Mahrous, Mariam Ehab, Hamed Hadhoud

Civil Engineering

Progressive collapse is defined as the failure of a primary vertical element of a structure, which may result in the failure of adjoining elements, consequently, leads to a partial or total collapse of the structure. Unified Facilities Criteria (UFC) and General Services Administration (GSA) guidelines used to assess the behavior of structures subjected to progressive collapse as a result of the loss of primary vertical support. For the current case study, numerical analysis is carried out for a typical ten-story reinforced concrete post-tensioned flat slab structure subjected to primary vertical element loss (corner column, edge column, internal column, edge shear …

Effects Of Supplementary Cementitious Materials On Early-Age Tensile Creep And Shrinkage Of Concrete, Lucas James Bucklen

Graduate Theses, Dissertations, and Problem Reports (ETD)

Determination of early-age tensile creep properties is critical for the performance of mass concrete structures at an early age. Due to the stress relaxation that tensile creep induces in concrete structures, accurate quantification of creep deformation is needed to determine the stress profile of the structure. Conventional methods of measuring tensile creep include the direct tension test where the concrete is subject to constant tensile stress. This method requires large quantities of concrete with embedded strain gauges which can only be used once. In this paper, the tensile creep parameters of concrete are found by using the restrained concrete ring …

Field Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder In An Application That Includes Skew And Superelevation, Adam D. Roh

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140’-0” in length. A technical working group from within the SSSBA developed the notion for the modular shallow press-brake-formed steel tub girder as a solution for the short span steel bridge market.

After extensive testing at West Virginia University and multiple successful field demonstrations, members of …

Internet Of Things For Sustainable Mining, Abdul Salam

Computer Information Technology Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Final Report - A Training Framework Of Robotic Operation And Image Analysis For Decision-Making In Bridge Inspection And Preservation, Ruwen Qin, Genda Chen, Zhaozheng Yin, Muhammad Monjurul Karim, Tianyi Zhao, Suzanna Long, Sushil J. Louis

Project WD-1

This project aims to create a framework of training engineers and policy makers on robotic operation and image analysis for the inspection and preservation of transportation infrastructure. This framework includes a method for camera-based bridge inspection data collection, algorithms for data processing and pattern recognitions, and tools for inspection and preservation decision-making. Specifically, a Siamese Neural Network was developed to support bridge engineers in analyzing big video data. The network was initially trained by one-shot learning and fine-tuned iteratively with human in the loop. The neural network algorithm retrieved all related regions from the video based on the regions of …

Comparision Of Fillet-Welded Base Plate Fatigue Design For Highway Support Structures With Laboratory Research Tests, William Shea

Williams Honors College, Honors Research Projects

There are many types of vertical structures along highways that serve unique purposes. These structures include traffic signs for directing, warning, or regulating traffic, luminaires for distributing and directing light, traffic signals supporting equipment such as traffic lights, and combination structures including any combination of the aforementioned structures. Highway support structures are typically fabricated from steel or aluminum and are designed to the guidelines and specifications of the AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals. The structures are connected to a foundation by anchor bolts through a welded base plate. Often a cause …

Applications Of Ultra-High Performance Concrete, Zachary Plevny

Williams Honors College, Honors Research Projects

The main objective of this research paper is to determine the current applications of ultra-high performance concrete (UHPC). A second objective is to determine the reason UHPC is used in various applications. More than 17 bridges in the United States have been built with UHPC components. A handful of state departments of transportation have deployed UHPC components within their infrastructure, and many more are actively doing research and considering the use of UHPC. So, this is a relatively new material that is becoming more widely used. The following seven projects, which include UHPC components are discussed in detail: Mars Hill …

Compressibility Of Fine-Grained Soil In Central Florida, Andre Kruk

Electronic Theses and Dissertations, 2020-2023

Fine-grained soils are responsible for most site settlements through a time dependent process known as consolidation. The magnitude of consolidation is quantified with three terms: the recompression and compression indices, referred to as the soil's compressibility indices, and preconsolidation pressure. The ideal methods to estimate these parameters are direct measurements from lab or in-situ field tests, other method include estimation from experience or from correlations to soil parameters. This study refines correlations between compressibility indices and index properties as previously researchers and soil mechanics suggest a strong correlation exists. This study also suggests a correlation to CPT parameters as this …

Steel Bridge Truss Analysis, Alastair Seed

Williams Honors College, Honors Research Projects

The purpose of this project is to conduct a study comparing the effectiveness of different cross frame orientations in lowering the deflection of the main stringers of a bridge. Three different orientations of cross frames were researched; vertical, angled with the superstructure webbing, and halfway-angled. All of these were studied when the stringers were placed directly under the superstructure and when the superstructure was placed outside of the stringers. Analysis was performed in a program called SAP 2000 to find the deflections along the stringers under different loading conditions. The results showed that when the superstructure was oriented over the …

Can The Integration Of Bim And Gis Enhance Information Management For Large Scale Linear Infrastructure Projects?, Bim Tudublin, Brendan Kennedy

Capstone Reports

The integration of BIM and GIS is the subject of considerable research, particularly as the two coalesce for the purpose of information management. Large scale infrastructure projects require best practice in terms of how information is managed given the volume of information generated throughout the project lifecycle and the numerous parties requiring access to project content. This paper investigates whether the integration of BIM and GIS can enhance information management on large scale linear infrastructure projects. The research comprised a literature review and interviews with a number of BIM/GIS professionals actively working on linear infrastructure projects across the world. Some …

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Binary Particle Swarm Optimization Algorithm For Optimization Of Steel Structure, Atitaya Chaiwongnoi

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research studies on the performance of Binary Particle Swarm Optimization (BPSO) algorithm. The first part is finding the best inertia weight of BPSO from various types of inertia weight. The second part is optimizing the cross-sectional area of steel structures and topology of bracing system under vertical and lateral load. The structures studied in the research include unbraced frames and X-braced frames. Moreover, the braced frame also investigates the influence of the classification groups of elements. The elements are classified into finer groups than the original group. The design of the structure follows the AISC code. From the investigation …

Macro - And Microstructure Evaluation And Field Applications Of Concrete With Recycled Glass Pozzolan, Marija Krstic

Dissertations and Theses

Concrete is the most used material in the world, second only to water. Conventional concrete is produced with Portland cement (PC). The production of cement is an energy intensive operation that has raised significant environmental concerns, since one ton of cement generates an equal ton of CO₂. In the USA about 90 million tons of cement are used annually, with 3 million tons used in New York. Most contemporary concrete applications for buildings and infrastructure use high-performance concrete (HPC) mixtures which are produced by replacing a percentage of cement with supplementary cementitious materials (SCMs), consisting mainly of fly-ash …

Decision-Making In Reuse Of Highway Bridge Foundations, Ehssan Hoomaan

Dissertations and Theses

According to the 2019 National Bridge Inventory data from Federal Highway Administration, the average age of highway bridges in the U.S.A. is 45 years, with almost 43% of existing highway bridges being older than 50 years, and eight percent of all U.S. national highway bridges being in poor condition. Foundation and substructure of existing highway bridges (over land and water) may have significant functional values even after being under service for decades. Reusing an existing bridge foundation during the reconstruction of a bridge (e.g., major rehabilitation, retrofitting, replacement of superstructure and substructure, and addition/removal of a span) has the potential …

Computational Fluid Dynamics Simulation Of Rain-Wind-Induced Vibration Of Stay Cables, Hongfan Wang

Dissertations and Theses

Due to the large amplitude, frequent occurrence and severe consequences, the rain-wind induced vibration (RWIV) of stay cables in cable-stayed bridges has been investigated extensively by researchers around the world. However, the underlying excitation mechanism is still unclear. Recently, computational fluid dynamics (CFD) simulation has been widely applied in the research on structure vibrations due to dynamic wind loads, with great potential as an alternative tool for wind tunnel testing. It has also been adopted to investigate the RWIV, but only a few studies have been conducted so far. Furthermore, most of the CFD simulations reported in literatures are two-dimensional, …

Slender Frp Elements As Discrete Reinforcement For Concrete, Yuan Tian

Dissertations and Theses

This dissertation presents a study that led to the development of slender elements that look like fibers used for reinforcing concrete but with a very different reinforcing mechanism. These elements, referred to as “Needles” are very rigid and strong; when intersected by growing cracks in concrete under heavy and increasing loads, they do not break and deform minimally. In the present work major steps were taken to understand the reinforcing mechanism of Needles. In addition, to investigate the influence of Needles on the mechanical performance of concrete incorporating Needles, at both material and structural levels, a series of laboratory experiments …

Control Of Energy Storage Utilisation For A Building Integrated Microgrid Using Multi-Objective Metaheuristic Optimisation Methods, Quang An Phan

Theses

The aim of this thesis was to develop and analyse optimisation strategies for commercial buildings with integrated microgrids, in order to find optimal trade-offs between maximising profitability and facilitating renewable energy from the national power grid. The continued proliferation of microgrids, as well as the increase in electricity produced by renewable energy sources on the Irish national grid has necessitated the requirement for these strategies. Models to simulate the performance of a photovoltaic system, wind turbine and battery bank were developed and validated. The most suitable optimisation algorithm to generate an optimal charge/discharge rate schedule for a battery bank was …

A Review Of The Second Level Construction Studies Syllabus In Ireland: In Response To A Changing Technological Environment Promoting Digital Construction, Bim Tudublin, Nigel Wearen

Capstone Reports

The zeitgeist of Construction Studies ought to adopt digital construction and work practises. However, legacy is slow to change/adapt, and a lack of awareness persists. From the perspective of the continuing legacy (vocational training) of Construction Studies being linked with industry, this research explores how the subject could evolve to deliver new digital skill sets and to meet the demands of the Architecture, Engineering, and Construction (AEC) sector.A pilot study was undertaken with 24 Transition Year students. The method and content of the study was based on an existing model from the Design Engineering Construction in the UK and was …

A Critical Examination Of The Use Of Business Intelligence (Bi) In The Optioneering Of Generative Design Models: A Case Study., Bim Tudublin, Davitt Lamon

Capstone Reports

This research outlines the development of a generative des ign workflow for the architectural space planning of a 1,200 sq.m office located in Dublin, Ireland, and the application of statistical analysis and data visualisation for the optioneering of gen erated models. First, the paper defines a computational desig n model with the potential to generate a variety of office layouts, including circulation routes and desk locations. It then identifies three unique performance metrics that evaluate each design option. Finally, the study applies a multi objective genetic algorithm (MOGA) to explore the high dimensional design space of all potential options and …

Tire-Chip Reinforced Foundation As Liquefaction Countermeasure For Residential Buildings, Hemanta Hazarika, Siavash Manafi Khajeh Pasha, Isao Ishibashi, Norimasa Yoshimoto, Tota Kinoshita, Shigeki Endo, Ashoke Kumar Karmokar, Takuto Hitosugi

Civil & Environmental Engineering Faculty Publications

To prevent vibration-induced and liquefaction-induced damage to residential buildings during earthquakes, a low-cost technique has been developed and described here. It utilizes a mixture of tire chips and gravel as the horizontal reinforcing inclusion under the foundation of residential houses. The horizontal reinforcing inclusion refers to a layer of tire chips and gravel which is placed horizontally beneath the foundation. This mixture of tire chips and gravel provides sufficient bearing capacity to the foundation. In this research, a series of small-scale 1 g model shaking table tests was performed to evaluate the effectiveness of the technique. In addition, cyclic undrained …

Final Report - Microwave Camera For Concrete Delamination And Steel Corrosion Detection, Chao Liu, Mohammad T. Al Qaseer, Reza Zoughi

Project SN-4

This project studied the capability of microwave methods to detect thickness of induced corrosion byproduct on rebars embedded into concrete, and also similarly embedded delamination. Three microwave methods used or investigated included microwave synthetic aperture radar (SAR) imaging method, microwave resonance method, and microwave nonlinear measurement. Wideband, low-frequency antennas including a double-ridged horn and a Vivaldi antenna were designed for achieving reasonable spatial resolution while being able to penetrate lossy concrete. Simulations and experiments were conducted for all of these investigations. For the rebar samples use, the results showed that the corrosion thickness was very small (~50 m) which seemed …

A Training Framework Of Robotic Operation And Image Analysis For Decision-Making In Bridge Inspection And Preservation, Ruwen Qin, Genda Chen, Suzanna Long, Zhaozheng Yin, Sushil Louis, Muhammad Monjurul Karim, Tianyi Zhao

Project WD-1

This project aims to create a framework of training engineers and policy makers on robotic operation and image analysis for the inspection and preservation of transportation infrastructure. Specifically, it develops the method for collecting camera-based bridge inspection data and the algorithms for data processing and pattern recognitions; and it creates tools for assisting users on visually analyzing the processed image data and recognized patterns for inspection and preservation decision-making.

The project first developed a Siamese Neural Network to support bridge engineers in analyzing big video data. The network was initially trained by one-shot learning and is fine-tuned iteratively with human …

3d Printing Reinforced Concrete Structures, Bryce Tyler Tafolla

Masters Theses

"This study aims to investigate a 3D printing method to directly incorporate continuous reinforcement into concrete structures. The ability to design and produce complex structures with optimized topographical configuration can be used to reduce potential material waste while maintaining the required structural strength. Furthermore, the ability to actively incorporate reinforcement into printed members substantially reduces potential labor requirements and eliminates the need to set up formwork.

The study began its initial approach with a manual extrusion process containing reinforcement to observe the necessary constraints required to achieve a printing system with this functionality. The second stage of development was designing …

Bridge Resilience Assessment With Inspire Data, Iris Tien, Yijian Zhang

Project RR-1

This project proposed a methodology to assess the impact of corrosion on the performance of bridges. The combined analytical and numerical modeling of shear-critical and lap-spliced columns is detailed, and outcomes are verified with previous experimental test data. The impact of corrosion on risk is assessed through conducting fragility analyses. Results quantify the increase in failure probabilities of these structures, measured by increasing probabilities of exceeding defined damage states, with increasing levels of corrosion. Corrosion is found to have a larger impact on increasing probabilities of exceeding more severe damage states. Twenty percent mass loss of reinforcement increases the probability …

Final Report - Battery-Free Antenna Sensors For Strain And Crack Monitoring Of Bridge Structures, Yang Wang, Dan Li

Project SN-2

This project studies a wireless patch antenna as a novel strain/crack sensing technique for structural health monitoring (SHM). The strain/crack induced resonance frequency shift of the antenna can be wirelessly detected and utilized to estimate the surface strain and crack propagation. However, temperature fluctuation can generate some unwanted changes in resonance frequency and introduce significant noises in measurement. This project studies a thermally stable patch antenna sensor through both numerical simulations and laboratory experiments. Using a substrate material with a steady dielectric constant, a patch antenna sensor is designed to perform reliably under temperature fluctuations. In addition, a dual-mode patch …

Time-Dependent Reliability Framework For Durability Design Of Frp Composites, Rajneesh Kumar Bharil

Graduate Theses, Dissertations, and Problem Reports (ETD)

The life-cycle performance, durability, and aging characteristics of Fiber Reinforced Polymer (FRP or Structural Composites) have been of keen interest to the engineers engaged in the FRP design, construction, and manufacturing. Unlike conventional construction materials such as steel and concrete, the design guidelines to account for the aging of FRP are somewhat scattered or not available in an approved or consistent format. Loss of strength over time or aging of any structural material should be of concern to engineers as the in-service lifespan of many engineering structures is expected to exceed 100 years. Use of durability strength-reduction factors or factors …

Experimental And Field Evaluation Of Frp Pedestrian Bridge Decks, Kalrav Singh Tomer

Graduate Theses, Dissertations, and Problem Reports (ETD)

Traditional materials such as steel, timber, and concrete have continued to dominate their usage in civil infrastructure. They offer great advantages like strength and stiffness but at the same time they pose major issues in terms of durability and maintenance. Fiber reinforced polymer (FRP) exhibits outstanding properties like lightness, excellent corrosion and wear resistance along with superior thermo-mechanical properties. Glass FRPs (GFRPs) have emerged as one of the best alternatives in the field of civil infrastructure. It has been more than four decades since fiber reinforced polymer (FRP) composites have gained notable applications in civil infrastructure industry. However, FRPs have …

Monotonic Response Of Rc Exterior Beam-Column Joints Reinforced With Filler-Modules And Frp Composite Wraps/Gussets, Praveen Kumar Reddy Majjigapu

Graduate Theses, Dissertations, and Problem Reports (ETD)

A review of post-earthquake reconnaissance studies revealed that reinforced concrete (RC) structures, designed and built before the development of Uniform Building Code (UBC) seismic design guidelines in 1976, have suffered complete collapse or severe damages due to the brittle failure of exterior beam-column joints. Over the past 50 years, several studies were conducted to strengthen exterior joints of in-service structures, with limited emphasis on developing simple, economic and durable repair strategies to improve energy absorption through large inelastic joint deformations. Even less emphasis was devoted to developing repair procedures that minimize stress-concentrations at joint corners and enhancing the strength, ductility, …

Thermal Analysis And Post Construction Verification, Cormac Flood, Lloyd Scott

Articles

Purpose – The residential sector in Ireland accounted for 25 per cent of energy related CO2 emissions in 2016 through burning fossil fuels, a major contributor to climate change. In support of Ireland’s CO2 reduction targets, the existing housing stock could contribute greatly to the reduction of space-heating energy demand through retrofit. Approximately 50 per cent of Ireland’s 2m dwellings pre-date building regulations and are predominantly of cavity and solid wall construction, the performance of which has not been extensively investigated at present. Although commitment to thermal upgrade/retrofit of existing buildings may increase under future government policies, the poor characterisation …