Structural Engineering Commons^™

Piazza Di Ulivo: Arce Patio Redesign, Sophia Kim-Oanh Ha, David Colman

Architectural Engineering

Piazza de Ulivo was Phase 1 of a multi-quarter initiative to redesign and bring life to a patio space adjacent to Engineering West (Building 21) in Spring of 2020. Located within the central courtyard of Engineering West (Hasslein Garden), the patio space previously contained a senior project pergola that collapsed and has been removed. The remaining elements from this previous structure were an inverted moment frame consisting of five concrete columns and beams joining them. Additionally, a wooden bench with concrete pedestals remained under the shade of the existing olive tree. Desire within the Architectural Engineering (ARCE) department for the …

Comparison Of Different Power System Resilience Assessment Methods, Jian How Sam Chan

Student Works (2020-2029)

Climate change has been given significant attention in recent times, calling for more ideas to address issues stemming from extreme weather events. Until climate change can be slowed down and ultimately be reversed, it is an imminent objective to find solutions for the mitigation and prevention of the effects of catastrophic weather events. History has a record of the devastation caused by such events on electrical power infrastructures. While electrical power systems have conventionally been designed and built to weather everyday conditions, confronting cataclysmic high-impact, low-probability events will require more resilient attributes. Power systems are often deemed as the backbone …

Computational Modeling Of Recycled Aggregate Concrete Systems, Anuruddha Jayasuriya

Dissertations

Using recycled concrete aggregates (RCA) as a substitution in concrete materials is an excellent way to improve the sustainability of concrete production. However, due to a lack of globally accepted technical guidance, and high material variability, the usage of recycled aggregate concrete (RAC) systems is not readily practiced within most structural engineering applications.

To date, the majority of the experimental findings in the literature indicate that RAC is a weaker composite material when compared to a natural aggregate concrete system in terms of mechanical properties such as compressive strength, elastic modulus, tensile strength, flexural strength, fracture energy, and toughness. However, …

Reliability Analysis Of Concrete Gravity Dams Under Earthquake Loads, Anu Abraham

LSU Master's Theses

Dams are infrastructure assets of extreme importance; the failure of which can have catastrophic consequences on adjacent communities. Therefore, it is prudent for authorities to evaluate the safety of existing dams in seismically active regions. This thesis focuses on carrying out a reliability analysis of concrete gravity dams under earthquake loads using an enhanced finite element model. For many years, reliability studies on concrete gravity dams were performed using a finite element model that considered a massless foundation and assumed that water is incompressible. Moreover, the design ground motion was applied without any modification either at the bottom fixed boundary …

2-D Non-Linear Finite Element Analysis Of Folsom Dam: Seismically Induced Separation And Pore Pressure Along The Soil-Concrete Interface, Grace Amoussou

Master of Science in Civil Engineering Theses

The seismic soil-concrete interface stability of composite dams has been an area of interest to many researchers. However, the true interface behavior during a seismic event has not been well understood. During a ground shaking, bonding and de-bonding action along the interface may cause significant separation of soil and concrete surfaces, and such a separation may take place at any depth along the interface creating a stability concern for the overall dam. Moreover, the repetitive nature of bonding/debonding behavior may induce excess pore pressure along the interface, which in turn, may trigger a liquefaction failure or a hydraulic fracture in …

Experimental And Numerical Comparison Of Flexural Capacity Of Light Gage Cold Formed Steel Roof Deck, Christopher H. Raeel, Dawid Gwozdz

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This paper presents an analysis of experimental data and compares it to two numerical analysis methods of light gage cold formed steel roof deck. The flexural capacity was determined upon the first failure mode of the light gage cold formed steel roof deck. A comparison of the experimental data was made to both the effective width method and the direct strength method. The objective of the comparison was to have a physical test provide the actual behavior of the light gage cold formed steel roof deck and grade how well the numerical analysis, effective width and direct strength methods, compare …

On The Seismic Performance Of Skewed Special Moment Frame Reduced Beam Section Connections, Damaso Daniel Dominguez

Graduate Theses and Dissertations

Special Moment Frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs, as they provide lateral system stiffness without the use of braces which often obstruct views and architectural features. Reduced beam section (RBS) connections are popular SMF connection details developed following the Northridge earthquake to limit brittle fractures within connection welds. Current American Institute of Steel Construction (ASIC) provisions (i.e. AISC 341-16) provide prequalified SMF RBS connection details (including welding requirements); however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF RBS connections …

Numerical Simulations Of Spread Foundations Supported On Stone Columns Using The Discrete Element Method, Anibal Enrique Santos Marin

Graduate Theses and Dissertations

The implementation of stone columns as a ground improvement technique has become more popular in geotechnical construction practice as a result of their ability to improve strength, stiffness and permeability characteristics of weak clayey soil deposits. There are several analytical and empirical approaches to estimate the bearing capacity of stone column foundation systems; however, there is notable variation in the performance of these existing methods when compared with full-scale experimental results. For very weak cohesive soils (i.e., undrained shear strength less than 15 kPa), the use of conventional stone columns becomes restricted because of the insufficient confinement that these types …

Extremely Low Cycle Fatigue Behavior Of Additively Manufactured 17-4ph Stainless Steel, Kaley Collins

Civil Engineering Undergraduate Honors Theses

Steel structures survive seismic loading thanks to components capable of dissipating large amounts of energy through large deformations. Future optimizations of these components include complex free-form geometries that are difficult to fabricate with traditional casting processes. Additive manufacturing (AM) is an alternative for producing optimized free-form geometries. AM material contains significant differences in microstructural characteristics and mechanical behavior compared to its wrought counterparts. Research has been conducted to understand the effect of microscopic features in the high cycle fatigue (HCF) and low cycle fatigue (LCF) regimes. This study focuses on the behavior of 17-4 Precipitation Hardening (PH) stainless steel in …

Multiaxial Fatigue Of Notched Steel Plates And Investigation Of Cfrp Retrofits For Crack Initiation Prevention, Ayumi Fujii

Civil Engineering Undergraduate Honors Theses

Fatigue cracks are cracks that result from repeated loading over time, often following millions of loading cycles. Fatigue cracks occur even if the applied load is not large enough to cause material yield. Once a fatigue crack initiates, resulting stress concentrations at the crack tip often make it difficult to arrest the growth of the crack. In order to prevent growth and propagation of fatigue cracks within structural components, it is necessary to alter the stress condition at the crack tip. Fatigue cracks in steel structures resulting from multiaxial loading and or geometry conditions that result in complex states of …

Preliminary Investigation Of Required Bsca Amount For Soil Cement Mixtures, Mariel Mayori Rivero

Civil Engineering Undergraduate Honors Theses

The recent increase of flooding in the United States and the high expenses related to the damage that these floods have caused to waterway structures suggests a potential interest in rapid setting soil cement to make effective repairs. For this thesis, mix designs of soil only at three different sand-clay proportions were prepared and tested for moisture content and maximum dry density. Due to the early closing of the laboratory and research activities, reliable results were collected from the 70% sand and 30% clay proportions. At those proportions of soil, the optimum moisture content was found to be 8.88% with …

Understanding Workability In Belitic Calcium Sulfoaluminate Concrete Mixtures, Caleb W. Chesnut

Civil Engineering Undergraduate Honors Theses

Belitic Calcium Sulfoaluminate cement (BCSA) is an emerging technology in the concrete industry. BCSA has similar hardened properties to portland cement (PC) but can set in under 20 minutes and reach 4,000 psi in less than 2 hours. Portland cement accounts for 8% of the world’s CO2 emissions, BCSA cements require less energy to produce. Studies have shown that 40% less CO2 is emitted during the production of BCSA cement than portland cement. This environmental benefit also makes it a very promising PC alternative. Before a new material can be used, designers need to understand the material’s properties. The goal …

Quantitative Resistance Assessment Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The blast resistance of a typical reinforced concrete bridge pier column design was modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. While varying concrete strength, amount of longitudinal reinforcing steel, and gravity load, the effect of applying an externally bonded steel fiber reinforced polymer (SFRP) wrapping was assessed. The presented approach uniquely quantifies column blast resistance in terms of charge weight. It was found that blast capacity was roughly linearly related to concrete strength and steel reinforcement ratio, the former of which is most influential. It was further found that a single layer of …

Final Report - In-Line Long Period Grating And Brillouin Scattering Fiber Optic Sensors For Strain, Temperature, Chloride Concentration, And Steel Mass Loss Measurement In Bridge Applications, Genda Chen, Chuanrai Guo

Project SN-3

This project developed an in-line grating and scattering fiber optic sensing system for strain, temperature, and steel mass loss measurement in bridge applications. Long period fiber gratings (LPFG) sensors are responsive to thermal and mechanical deformation, and the refractive index change of their surrounding medium. Brillouin scattering sensors are responsive to temperature and strain along an optical fiber. A CO2 laser aided fiber grating system was assembled for LPFG fabrication. To enable mass loss measurement, a low pressure chemical vapor deposition (LPCVD) system was built to synthesize a graphene/silver nanowire composite film as flexible transparent electrode for the electroplating of …

Final Report - Uav-Enabled Measurement For Spatial Magnetic Field Of Smart Rocks In Bridge Scour Monitoring, Genda Chen, Haibin Zhang, Zhaochao Li

Project SN-1

This project proposed an unmanned aerial vehicle (UAV)-based method to measure the change in magnetic field as a result of the movement of a smart rock to monitor the maximum depth of bridge scour. A high resolution 3-axis magnetometer and global positioning system (GPS) unit were installed on the UAV to obtain the magnetic field intensity and its corresponding coordinate. The optimization algorithm for the localization of smart rock was demonstrated and adopted. The impact factors on accurate smart rock positioning were experimentally investigated. Utilizing finite element method, the influence of steel reinforcing bars on the distribution of ambient magnetic …

A Prescriptive Criterion For Amphibious Foundation Design, Erin Hughes

Master of Science in Civil Engineering Theses

Flooding is the most frequently occurring natural disaster in the United States and worldwide (FEMA, 2004). Each year, when major flooding ravishes communities, residents are put in danger and often displaced from their homes and jobs for several weeks or months, if not more. The use of amphibious structures as a flood risk mitigation technique has currently only been implemented in individual or small-scale development. Information on the structural design of such buildings is limited and most of the current knowledge regarding amphibious structures is presented in architectural applications. The primary objective of this research is to develop a prescriptive …

The Challenge Of Calculating U-Factors For Cold-Formed Steel C-Shape Wall Assemblies Using Framing Factors, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Development Of A U-Factor Calculation Procedure For Cold-Formed Steel C-Shaped Clear Wall Assemblies, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Classification Of Seismic Vulnerability Based On Machine Learning Techniques For Rc Frames, Seyed Hooman Ghasemi, Hossein Bahrami, Mahdi Akbari

Henry M. Rowan College of Engineering Departmental Research

Seismic vulnerability means the inability of historical and monumental buildings to withstand the effects of seismic forces. This article presents a classification model to specify the damage state of the Reinforced Concrete (RC) frames based on a collection of datasets from the damaged buildings in Bingol earthquake of Turkey for use in the learning process of the algorithm. The proposed model uses two classifiers including the redundancy and also the construction quality of the buildings to estimate the class of damage from four categories including none, light, moderate and severe. The available database of the considered earthquake includes the information …

Structural Design Of Pool House In The City Of Columbia, Nathan F. Gates

Senior Theses

This report presents a structural design for a one-story pool house in the City of Columbia. The most important part of the project was determining critical horizontal and vertical loads, and designing each member in accordance to those governing loads. The loads we analyzed were dynamic, dead, live and seismic. By means of the LRFD method, the greatest possible load combination was calculated, combining the previously mentioned loads. These load combinations were different for each analysis, as the loading pressures will change depending on what structural system is being analyzed. This comprises the large part of the report and of …

Effects Of Collision Damage On The Ultimate Strength Of Fpso Vessels, Muhammad Zubair Muis Alie, Dian Ramasari, Taufiqur Rachman, Ristiyanto Adiputra

Makara Journal of Technology

Floating production storage offloading (FPSO) vessels are movable offshore structures. These structures are designed with large dimensions, and their decks are loaded with several types of equipment. During collision damage, the hull and deck parts loaded with equipment are severely affected. Therefore, the ultimate strength of FPSO vessels should be thoroughly checked and evaluated. The objective of the present study is to analyze the ultimate strength of FPSO vessels against collision damage characterized by hogging and sagging under longitudinal bending. The cross section of an FPSO vessel is modeled with elements composed of stiffened and unstiffened plates. The vessel length …

Synthesis Of Epoxy Monoethanolamide From Bauhinia Monandra Seed Oil, Adewale Adewuyi, Rotimi A. Oderinde

Makara Journal of Technology

In this study, we synthesized epoxidised monoethanolamide (EMA) from Bauhinia monandra seed oil (BMO) via a simple reaction route. In this process, BMO was transesterified to obtain a mixture of methyl esters, which was subjected to a urea adduct complexation reaction. The unsaturated methyl esters (BME) from the urea adduct complexation reaction were then epoxidised using performic acid produced in situ in a one-pot reaction system. The epoxidised methyl esters were converted to EMA by reacting them with monoethanolamine (1:10). The progression of the reaction was monitored using Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy, and the …

Ethylene Carbonate And Polyethylene Glycol As Efficient Plasticizers In Cmc-Pva-Nh4no3-Based Polymer Electrolyte, Noor Saadiah Mohd Ali, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

This study investigated the influence of plasticizers (polyethylene glycol [PEG] and ethylene carbonate [EC]) on the ionic conduction of CMC-PVA-NH4NO3. Blended biopolymer electrolytes (BBEs) based on carboxymethyl cellulose–polyvinyl alcohol (CMC-PVA) doped with ammonium nitrate (NH4NO3) were obtained via casting solution technique incorporated with PEG and EC, which acted as plasticizers. Electrical impedance spectroscopy (EIS) was conducted to evaluate the effect of plasticization on the ionic conduction properties. The ionic conductivity improved from 1.70 × 10−3 S/cm for un-plasticized BBEs to 3.92 × 10−3 S/cm for plasticized BBEs with EC and 3.00 × 10−3 S/cm for plasticized BBEs with PEG. The …

Liquefaction Potential Analysis Based On Nonlinear Ground Response On The Coastline Of Bengkulu City, Indonesia, Lindung Zalbuin Mase

Makara Journal of Technology

This paper presents the study of the seismic response and liquefaction potential of the coastal area of Bengkulu City during the September 2007 Sumatra earthquake. The study is conducted by collecting site investigation data (standard penetration test) and applying input motion to observe soil response. Synthetic ground motion is generated by considering the important aspects of earthquakes, including focal depth, epicenter, earthquake source, and site classification. The synthetized ground motion is then used as the input motion in the seismic response analysis. The results of this analysis are spectral acceleration and peak ground acceleration at each depth. The resulting spectral …

Comparison Of Phytoremediation And Filtration For Diamond-Mine-Tailings Water Treatment, M. Hafidhuddin Noor, Mijani Rahman, Akhmad Gazali, Nia Kania, Aulia Rahma, Erdina L.A. Rampun, Amalia E. Pratiwi, Muthia Elma

Makara Journal of Technology

The water pollution caused by diamond mine activities can kill aquatic life. In this work, we used phytoremediation and filtration to treat pond water polluted by the tailings of a diamond mine located in South Kalimantan, Indonesia. Einchhornia crassipes (water hyacinth) was utilized as the biomass for the phytoremediation process. Gravel (10–15 mm) and sand (0.1–1 mm) were used as filter media in the simple filtration setup, using an up-flow system (bottom to top). In the experiment, 16 L of diamond tailing water was poured into five phytoremediation reactors (each 60 L in volume), which were then tested over seven …

Seismic Evaluation And Optimization Of Reinforced Concrete Multistory Building, Ahmed Abdallah

Morehead State Theses and Dissertations

A thesis presented to the faculty of the Elmer R. Smith College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ahmed Abdallah in April of 2020.

Lateral-Torsional Instability And Biaxial Flexure Of Continuous Gfrp Beams Including Warping And Shear Deformations, Waverly G. Hampton

Civil & Environmental Engineering Theses & Dissertations

This dissertation presents an experimental and theoretical study of the lateral-torsional instability and biaxial flexure of Glass Fiber Reinforced Polymer (GFRP) beams including warping and shear deformation effects. The theoretical analysis is based on three simultaneous differential equations of equilibrium with new terms added to account for shear deformation effects. To solve these equations, algorithms based upon a central finite-difference approach are then developed. The experimental study is conducted on a series of single- and multi-span beams subjected to concentrated loads. The predicted beam behavior agreed well with that observed experimentally. The investigation revealed that the ASCE-LRFD Prestandard for pultruded …

Ionic Conductivity And Electrochemical Properties Of Alginate–Nn4no3-Based Biopolymer Electrolytes For Edlc Application, Norfatihah Binti Mazuki, Nur Muhitul Jalilah Rasali, Bouchta Sahraoui, Ahmad Salihin Samsudin

Makara Journal of Technology

In this work, alginate doped with various contents of ammonium nitrate (NH4NO3) as a solid biopolymer electrolyte (SBE) was prepared via casting by using distilled water as a solvent. Impedance studies on alginate–NH4NO3 SBE films were conducted via impedance spectroscopy. The lowest bulk resistance (Rb) showed that the maximum ionic conductivity of the sample containing 25 wt.% NH4NO3 at ambient temperature (303 K) was 5.56 × 10−5 S cm−1. The temperature dependence of ionic conductivity was evaluated, and results confirmed that electrolytes followed an Arrhenius behavior. The highest conducting sample was fabricated into an electrical double-layer capacitor and characterized in …

Current Status Of Hydrothermal Treatment For Energy And Material Recovery Toward A Sustainable Post-Consumer Material Cycle, Baskoro Lokahita, Muhammad Aziz, Fumitake Takahashi

Makara Journal of Technology

The demand for energy-efficient and environmentally friendly municipal solid waste (MSW) processing has increased in developing countries. The thermochemical process offers a fast and reliable solution to reutilize or reduce the volume of MSW. Hydrothermal treatment is a novel MSW treatment technology that is compatible with high-moisture-content feedstock. It involves the thermal degradation of MSW in pressurized water or steam, which promotes the disintegration of cellulosic and polymer materials. Recent advances have shown effective MSW conversion into homogenous solid hydrochar with higher energy density. Alkali and chlorine content, which causes issues in combustors, was successfully removed due to the washing …

Correction To: Recommendations Of Rilem Tc 260-Rsc For Using Superabsorbent Polymers (Sap) For Improving Freeze–Thaw Resistance Of Cement-Based Materials (Materials And Structures, (2019), 52, 4, (75), 10.1617/S11527-019-1375-4), Viktor Mechtcherine, Christof Schröfl, Michaela Reichardt, Agnieszka J. Klemm, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Agnieszka J. Klemm is affiliated to Glasgow Caledonian University, Glasgow, UK.