Structural Engineering Commons^™

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Housing Prefabrication And Resource Optimization, Megan Scherpereel

Honors Theses

Enclosure during construction is often time-consuming, expensive, and at the mercy of the weather. By introducing methods for manufacturing prefabricated enclosure components such as wall panels and roof sections, the impact of the three major variables is reduced. Designs for trusses, roof sections, wall sections, and foundations were developed and selected using civil engineering principles; and manufacturing and logistical processes were optimized using engineering and project management skill sets. These multi-disciplinary efforts were combined to create an accessible and versatile set of designs and instructions that can improve the effectiveness of both a skilled and non-skilled volunteer workforce. By creating …

Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic

Articles

The global road network spans 16.3 million km [1], of which 5 million km is in the EU. These road networks fulfil major economic and social goals by facilitating the movement of goods and people throughout the EU, and are therefore of the utmost importance to the economic and social life of the EU [2]. National governments invest heavily in their road networks, e.g., in 2014, EUR 53.33 billion was invested in the development and maintenance of the EU road network [3]. Each year, the world produces 1.6 trillion tonnes of asphalt [4], of which 218 million tonnes is produced …

Mechanical Alloying-Assisted Coating Of Fe–Al Powders On Steel Substrate, Alfian Noviyanto, Sri Harjanto, Wahyu Bambang Widayatno, Agus Sukarto Wismogroho, Muhamad Ikhlasul Amal, Nurul Taufiqu Rochman

Makara Journal of Technology

The coating layer of Fe–Al powders on the steel substrate was prepared by mechanical alloying at room temperature. Fe, Al, and the steel substrates were milled with high-energy ball milling for 32 h with a ball-to-powder ratio of 8 in an argon atmosphere to prevent oxidation during milling. Although mechanical alloying was performed for 32 h, no new phases were observed after mechanical alloying, as analyzed by X-ray diffraction. However, the crystallite size of the milled powders for 32 h decreased by factor two compared with the initial powders. Scanning electron micrographs showed that the coating layers formed >8 h …

Performance Of Free-Space Optical Communication Systems Using Optical Amplifiers Under Amplify-Forward And Amplify-Received Configurations, Ucuk Darusalam, Arockia Bazil Raj, Fitri Yuli Zulkifli, Purnomo Sidi Priambodo, Eko Tjipto Rahardjo

Makara Journal of Technology

With the growth of digital technology in the stage of industrial revolution 4.0, the demand for broadcasting large amounts of information to last mile users has increased. Free-space optical (FSO) communication is one of the telecommunication platforms that has shown immense potential in meeting the demand for information broadcasting. In this work, the performance of FSO communication based on wavelength division multiplexing with a data rate of 80 Gbps is investigated through simulations. The configuration of optical amplifiers in the FSO system is set up on the basis of the amplify-forward and amplify-received configurations to expand the network. The investigation …

Iso 9001:2015 Risk-Based Thinking: A Framework Using Fuzzy-Support Vector Machine, Ralph Sherwin A. Corpuz

Makara Journal of Technology

Risk-based thinking (RBT) is one of the distinct new features of the International Organization for Standardization 9001:2015. Interestingly, the standard does not prescribe any tools. Hence, organizations are puzzled as to the extent of conformance. Some organizations have adopted formal tools. However, these tools seem insufficient in linking the standard into an evidence-based decision support system. To resolve gaps in RBT implementation, this paper proposes a framework based on fuzzy inference system (FIS) and support vector machine (SVM) to automate risk analysis and evaluation, proposal and verification of action plans, and prediction of the feasibility of risks and opportunities according …

Influence Of The Shaping Process On The Tensile Properties Of Steel Reinforcement Bars Carbon Steel Grades Bjtp24 And Bjts40, Nuraziz Handika, Ridha Amalia Idhar, Jessica Sjah, Essy Arijoeni, Elly Tjahjono

Makara Journal of Technology

According to the current applicable national standard in Indonesia, i.e. SNI 07 2529 1991, in addition to the limitation on the loading rate, the steel bar must be reduced, formed, or lathed, as part of the shaping process of samples. This study determined and compared the effect of the shaping process on the yield strength, ultimate strength, and percent elongation by conducting tensile tests of steel bar grade BJTS40, i.e. deformed bar type of steel, and grade BJTP24, i.e., plain bar type of steel. Three diameters of the deformed bar (BJTS40) and one diameter of the plain bar (BJTP24) were …

Ionic Conductiviy Of Alginate-Nh4cl Polymer Electrolyte, Nurhasniza Mamajan Khan, Noor Saadiah Mohd Ali, Ahmad Faizrin Ahmad Fuzlin, Ahmad Salihin Samsudin

Makara Journal of Technology

This study aims to produce a solid biopolymer electrolyte (SBE) by doping ammonium chloride (NH4Cl) into alginate. Solution casting was used to prepare the alginate–NH4Cl SBE system. Electrical impedance spectroscopy was performed to analyze the electrical properties of the SBE under the applied frequency range of 50 Hz–1 MHz. The incorporation of 8 wt.% NH4Cl enhances the ionic conductivity of the SBE up to 3.18 × 10-7 S/cm at ambient room temperature. Fourier transform infrared spectroscopy shows that complexation occurs between the hydroxyl (-OH), carboxylate (COO-) and ether linkage (C-O-C) functional groups due to the formation of inter- and intra-molecular …

A Density Functional Theory Study On Using Montmorillonite To Reduce Air Pollution, Triati Dewi Kencana Wungu, Meqorry Yusfi, Suprijadi Suprijadi

Makara Journal of Technology

In this study, density functional theory (DFT) method is used to investigate the possibility of using a smectite clay mineral called montmorillonite (MMT) in reducing heavy metals, such as Cd, through Cd adsorption. The mechanism of Cd adsorption in MMT is observed theoretically, and the tetrahedrally isomorphic substitution on the upper layer of MMT is considered to observe the role of Al and Fe in strengthening Cd adsorption. Two types of MMT are modeled in this study: Al-MMT and Fe-MMT. The Al-MMT means that Al substitutes one atom in the upper tetrahedral layer of MMT, while Fe-MMT means that Fe …

Influence Of Lithium Bromide On Electrical Properties In Bio-Based Polymer Electrolytes, Ahmad Faizrin Fuzlin, Bouchta Sahraoui, Ahmad Salihin Samsudin

Makara Journal of Technology

This research presents the influence of lithium bromide (LiBr) on the electrical properties of alginate in bio-based polymer electrolytes (BBPEs) system. Bio-based alginate was prepared using the solution casting technique with various LiBr compositions. The ionic conductivity and electrical properties of the prepared BBPEs samples were studied using electrical impedance spectroscopy over a frequency range of 50 Hz–1 MHz. A maximum ionic conductivity of 7.46 × 10−5 S cm-1 was obtained for a sample containing 15 wt. % lithium bromide-doped alginate BBPEs at ambient temperature (303 K). The electrical analysis revealed that the most conductive sample based on alginate-LiBr BBPEs …

Use Of Viscoplastic Damper For Improving The Resistance Of Steel Frames To Blast Loading, Gholamreza Abdollahzadeh, Hadi Faghihmaleki, Hamed Hamidi Jamnani, Atefeh Ebrahimi Bardar

Makara Journal of Technology

In this paper, we evaluated the effect of viscoplastic dampers on the response of steel frames under blast loading. We used SAP2000 software and link elements to investigate the responses of nine-story steel frames with and without dampers. The proposed viscoplastic damper is a new type of viscous damper. The application of this damper is based on the availability of its constituent materials. The damper acts as a viscoelastic damper at low levels of vibration, but it acts as a combination of viscoelastic operator and metal-yielding device at extreme levels of vibration. With respect to the height of the structure, …

Seismic Loading Effects Within Orthogonally Connected Steel Lateral Force Resisting Systems, Alhussin Faraj Aliwan

Graduate Theses and Dissertations

Steel buildings located within seismically active regions require special design considerations to ensure public safety and prevent collapse during an extreme seismic event. Two commonly used steel systems are special moment frames (SMFs) and buckling-restrained braced frames (BRBFs). When two seismic systems share a common column in an orthogonal configuration (such as at a building corner), design specifications currently consider a 100+30 rule wherein the shared column is designed for 100% fuse demand in one direction, plus 30% fuse demand from the other direction. While this rule has been shown to be reasonable for elastic building response, a few studies …

Using Bcsa Cement To Repair Waterway Transportation Structures, Anazaria Johanis Ortega Gonzalez

Graduate Theses and Dissertations

Many maritime structures (e.g., locks, dams, ports) in the US are either reaching or are past their design lives, and there are limited funds for the necessary maintenance activities which can lead to repairs that requires closures. These structures are not easy to detour and often require dewatering before repairs can be made, closures can cause delays and business-related losses which can have a large effect on the nation’s economy. Thus, it is advantageous to reduce the repair time for maritime structures. BCSA (belitic calcium sulfoaluminate) cement is a promising material to perform this type of repair due to its …

Comparison Of Additively Manufactured And Wrought 17-4 Ph Stainless Steels In Ultra Low Cycle Fatigue, Timothy Strasser

Graduate Theses and Dissertations

Additive manufacturing (AM) processes allow for creation of complex geometries that are otherwise impractical to fabricate with traditional subtractive methods. AM technology has potential to improve the optimization of seismic lateral force resisting components which dissipate seismic energy through large plastic strains; however, the ultra low-cycle fatigue performance of AM metals are not yet well understood. Void formation during the AM fabrication process has potential to affect performance. This study compares the performance of heat-treated and non-heat-treated AM and wrought 17-4PH stainless steel in Ultra Low Cycle Fatigue. To understand ULCF performance differences between the AM and wrought specimens, post …

Behavior Of Concrete Structures Reinforced With High Strength Steel, Rahman S. Kareem

Graduate Theses and Dissertations

The structural strength and corrosion resistance of concrete members are improved when A1035 steel is used as the main reinforcement. The enhancement of A1035 is achieved by the modification of the composition and microstructure of the steel. Therefore, the behavior of concrete structures reinforced with high-performance steel (A1035) is different from those reinforced with the regular steel (A615). Concrete bridge decks reinforced with different amounts of A1035 were studied in this research program. The structural behavior of twelve concrete bridge decks reinforced with A615 Grade 420 (60 ksi) and A1035 Grade 830 (120 ksi) steel was investigated at both service …

Moisture Monitoring Of A Clt Structure In A Southern Climate, Elizabeth Poblete

Graduate Theses and Dissertations

Understanding of moisture behavior in cross laminated timber (CLT) is critical to the widespread use of CLT in construction in the United States. Currently, very little data exists on the long-term impact of moisture on CLT. The objective of this research is to collect data regarding the long-term moisture variation in the CLT panel at the University of Arkansas Adohi Hall residence hall. The climate of Northwest Arkansas is different from previously monitored buildings, as they were in the Pacific Northwest. Comparatively, Northwest Arkansas has a warmer climate with higher average annual precipitation. Waterproofing efforts are usually employed to prevent …

Exploring The Variability In The Gray Scale Imaging Process Of Asphalt Samples, David Oluwawade Olatunji

Civil Engineering Undergraduate Honors Theses

Gray scale image analysis is a powerful tool for testing asphalt concrete materials. From material composition to surface properties, gray scale analysis has shown evidence as a non-invasive way to obtain information from asphalt samples. Casillas et al. used a gray scale analysis to measure the Representative Volume Element of three asphalt sample geometries to understand the minimum size at which an asphalt sample is representative of a larger homogeneous mixture [1]. While the gray scale analysis used in this experiment yielded results, there were unknown factors in the image capturing process. Particularly, not much was known about the effect …

Real Records Scaling Factors Optimization To Fit The Syrian Design Spectra Using Genetic Algorithm, Seraj Jdyd

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

After selecting real seismic records it is necessary to scale these records to match the intensity of the earthquake expected for the site. Generally, scaling can be made by ground motions uniform scaling in time domain which is simply scaled up or down the ground motions uniformly to best match (in average) the target spectrum within a period range of interest. It’s an engineer’s job to find the best scaling factors to best match the target spectrum, which is a complex task, so we employed the Genetic Algorithm (GA) in finding those scaling factors to achieve the best results.

Genetic …

Effect Of Pvdf-Ca Ratio On Electrospun Membrane For Water–Oil Filtration Application, Mohamad Haziq Alias, Izan Izwan Misnon, Rajan Jose

Makara Journal of Technology

Oil spillage and generation of industrial water–oil wastewater mixture ignite a focus on filtration technology. Electrospinning technique provides a versatile route in producing tunable diameter and pores in nanofiber filtration membrane development. In this work, polyvinylidene difluoride (PVDF) and cellulose acetate (CA) electrospun membrane at different concentration ratios were synthesized for water–oil filtration application. The polymeric solutions were characterized using viscometer and conductivity testing, whereas the membranes were analyzed using contact angle, tensile test, scanning electron microscopy (SEM), and filtration testing of oil (dichloromethane). Conductivity test showed a decreased conductivity along with decrement of CA ratio in the polymeric solution. …

Effect Of Landfill Leachates On Some Water Quality Indicators Of Selected Surface Water And Groundwater At Ilokun, Ado-Ekiti, Nigeria, Olorunwa Omofunmi, Adesola Satimehin, Abraham Oloye, Okwunna Umego

Makara Journal of Technology

This study was conducted to examine the impact of dumpsites on the quality of groundwater and surface water. The water samples and leachates were collected from dumpsites in respective zones. The physicochemical properties of the samples were examined and determined in accordance with the standards of the American Public Health Association. Results indicated that the groundwater and surface water that are close to the dumpsites have an electrical conductivity of 385 and 245 Sd/cm, total dissolved solids of 168 and 128 mg/L, a turbidity of 4.6 and 22 NTU, a total alkalinity of 103 and 50 mg/L, a total hardness …

Effect Of Catholyte Concentration On Current Production During Chocolate Industry Wastewater Treatment By A Microbial Fuel Cell, Diana Rahayuning Wulan, Suprihanto Notodarmojo

Makara Journal of Technology

Microbial fuel cells (MFCs) use bacteria as a catalyst to oxidize organic and/or inorganic substrates and produce electric currents. Wastewater could function as an electron donor in the anode chamber and, thus, represents a very promising energy source. Catholytes, as electron acceptors, influence power production in MFCs by increasing the availability of electrons. The present research aims to determine the influence of catholyte concentration on current production in an aerobic two-chamber MFC. Aerobic treatment was carried out in the two-chamber MFC operated in an incubator at 37  1 °C with and without aeration in the cathode chamber. Wastewater from …

Evaluation Of Il-17a And Il-17f Gene Expression In Peripheral Blood Mononuclear Cells In Different Clinical Stages Of Chronic Hepatitis B Infection In An Iranian Population, Tannaz Akbari Kolagar, Seyed Reza Mohebbi, Fatemeh Ashrafi, Shahrzad Shoraka, Hamid Asadzadeh Aghdaei, Mohammad Reza Zali

Makara Journal of Technology

Hepatitis B virus (HBV) infection is one of the main causes of liver damage, which can also lead to chronic hepatitis B (CHB) infection. More than 240 million individuals worldwide are chronic carriers of HBV. Among individuals with CHB who are untreated, approximately 15% – 40% will progress to liver cirrhosis or cancer. The interactions between HBV and host immune response play significant roles in the progression of CHB. CHB can be generally divided into four different clinical phases: immune tolerance (IT), immune clearance, inactive carrier, and Hepatitis B surface antigen (HBsAg)-negative reactivation phase (ENEG). Many studies showed that interleukins …

Redesign Of Product Packaging With Kansei Engineering: Empirical Study On Small-Medium Enterprises In Indonesia, Amalia Suzianti, A. Aldianto

Makara Journal of Technology

Small-medium enterprises (SMEs) in Indonesia have been proven to be one of the important pillars of the national economy. Unfortunately, some problems hinder their development, and one of the critical problems is the quality of product packaging. The packages of SME products are considered poor, dirty, and unattractive. Packaging problem is one of the factors why consumers are less interested in buying and why SME products always lose in the competition with other products. This study discusses how to employ Kansei engineering to design better SME product packaging with a focus on psychological (affective) aspects. This research concludes that there …

Microstrip Filters: A Review Of Different Filter Designs Used In Ultrawide Band Technology, Hussain Bohra, Giriraj Prajapati

Makara Journal of Technology

In this study, optimization techniques applied in designing microstrip bandpass ultra-wideband (UWB) filters are presented. Optimization based on various defected ground structure techniques, resonator designs, and type of dielectric materials is discussed. Microstrip bandpass filters implemented at UWB frequency bands used in wireless communication systems have key features to control frequency response in passband and stopband. Optimization techniques are studied to attain optimum performance of bandpass microstrip filters to ensure minimum insertion loss, high selectivity, compactness, sharp transitions at cut-off frequencies, high return loss, and excellent linearity. Extensive study shows that proper selection of fabrication techniques and type of material …

Performance-Shaping Factors Of Personnel Performing Evacuation And Escape On Offshore Installations In Tropical, Norafneeza Norazahar, Nur Azizah Arryanie Morshidi, Arshad Ahmad, Wijayanuddin Mohd Ali

Makara Journal of Technology

Performance-shaping factors (PSFs) are used to address the strengths and weaknesses of workers performing escape and evacuation activities. These PSFs are time, environmental factors as stressors, complexity of activities, experiences and training, interaction between workers and emergency equipment, workers’ physical conditions, and procedures. This paper presents a survey work on fitness for the duty of workers performing basic offshore survival and emergency response training. The training provides credible scenarios of escape and evacuation in case of an emergency of offshore installations in tropical waters. The survey is conducted among participants of the tropical basic offshore safety induction & emergency training …

Failure Sampling With Optimized Ensemble Approach For The Structural Reliability Analysis Of Complex Problems, Christopher Eamon, Kapil Patki, Ahmad Alsendi

Civil and Environmental Engineering Faculty Research Publications

Failure sampling is a structural reliability method based on modified conditional expectation suitable for complex problems for which reliability index-based approaches are inapplicable and simulation is needed. Such problems tend to have non-smooth limit state boundaries or are otherwise highly nonlinear. Previous studies recommended implementation of failure sampling with an extrapolation technique using Johnson's distribution or the generalized lambda distribution. However, what implementation method works best is problem dependent. The uncertainty of which approach provides best results for a particular problem limits the potential effectiveness of the method. In this study, a solution is proposed to this issue that eliminates …

Flexural Behaviour Of Over-Reinforced Concrete Beam Using External Steel Plate, Shatha Sahib Kareem

Student Works (2020-2029)

Over-reinforced concrete beam fails by crushing of the concrete compression zone before the yielding of steel reinforcement in the tension zone. An over-reinforced concrete beam may failed suddenly without warning before failure as the failure is instantaneous. Therefore, numerous codes of practices recommended a beam design to avoid brittle failure. However, in some situations, due to the limitation of spaces, using over-reinforced concrete beam is not avoidable. Previous researches showed that it is possible to design an over-reinforced concrete beam without brittle failure using the methods such as helical-reinforcement, short-stirrups, and hybrid-system. This study is an effort to investigate the …

Implementation Of An Open-Source Digital Image Correlation Software For Structural Testing, Nicole V. Buck

Master's Theses

This thesis investigates the appropriateness of a simplified, open-source digital image correlation (DIC) software for use in quasi-static, structural testing utilizing two-dimensional (2D) DIC measurements. DIC is a non-contact optical measurement technique that uses computer vision to track unique attributes on the surface of an object. For structural testing, traditional instrumentation such as displacement sensors and strain gages are impractical for full field measurements due their limited ability to capture large amounts of data. However, over the past decade, DIC has proven a successful method for full-field kinematics measurements, making it an appealing tool for collecting high densities of accurate …

Numerical Study Of Paraffin Wax Melting In A Cavity With A Gradient Of Hot Wall Inclination, Agus Dwi Korawan

Makara Journal of Technology

The melting of a phase change material (PCM) in a cavity with a gradient of hot wall inclination was simulated numerically using five models, namely, Model-A, Model-B, Model-C, Model-D, and Model-E with gradients of −2, −4, ∞, 4, and 2, respectively. The PCM was paraffin wax, which was melted using an enthalpy porosity technique with a pressure-based method. Model-A was found to be the best model. For the completion of the melting process, the models were assigned with the liquid fraction of 1. Model-A required the shortest time, followed by Model-B, Model-C, Model-E, and Model-D, respectively. Compared with Model-C, Model-A …

St. Mary And St. Anne Cathedral, Cork: An Optimum Heating Solution For Heritage Buildings?, Christopher Shiell, Roger P. West

Civil Engineering Research in Ireland 2020

Cathedrals and most churches are characterised by having large internal, undivided spaces and permeable building envelopes. They are often used little, intermittently, but predictably and, in spite of the fact that they are unique in still being largely used for the purpose for which they were built many centuries ago, they are now often used for additional purposes, for which they were never designed. These uses include concerts, graduation ceremonies, filming and a host of other uses all of which require a level of thermal comfort not envisaged by the original builders. Research was undertaken by the authors into the …