Structural Engineering Commons^™

International Information Management And Bim Best Practice Report - 2026 Update, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Augmenting External Surface Pressures’ Predictions On Isolated Low-Rise Buildings Using Cfd Simulations, Md Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

The aim of this paper is to enhance the accuracy of predicting time-averaged external surface pressures on low-rise buildings by utilizing Computational Fluid Dynamics (CFD) simulations. To achieve this, benchmark studies of the Silsoe cube and the Texas Tech University (TTU) experimental building are employed for comparison with simulation results. The paper is structured into three main sections. In the initial part, an appropriate domain size is selected based on the precision of mean pressure coefficients on the windward face of the cube, utilizing Reynolds Averaged Navier-Stokes (RANS) turbulence models. Subsequently, recommendations regarding the optimal computational domain size for an …

Evaluation Of Novel Jointless Engineered Cementitious Composites Ultrathin Whitetopping (Ecc-Utw), Ricardo Hungria

LSU Doctoral Dissertations

Ultrathin Whitetopping (UTW) is a rehabilitation technique that consists of placing a thin layer of concrete over a damaged asphalt pavement. While UTWs have demonstrated satisfactory performance in field tests, the inherent brittleness of concrete has led to the appearance of distresses. To address these distresses, Engineered Cementitious Composites (ECC) have been proposed for UTW applications, thanks to their exceptional attributes, including tensile ductility, flexural performance, and fatigue resistance. In this study, an ECC-UTW was constructed to investigate its potential as a viable solution. The project comprised two 18.3 m ECC sections with different thicknesses, namely 63.5 mm and 101.6 …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Investigating The Resistance Properties Of Concrete Containing Waste Carpet Fibers, Faezeh Nejati, Ali Mahboobi

Makara Journal of Technology

This research was conducted with the aim of investigating the use of waste carpet fiber (WCF) and assessing the resistance properties of concrete. The main goal of this study was to investigate the effect of the internal processing of concrete containing WCF on increasing its resistance properties. At the same time, the secondary goals pursued in the research included determining the optimal percentages of carpet fibers in improving compressive strength, tensile strength, and bending strength. The materials used included cement, aggregates, water, WCF, and super lubricant. This research applied seven mixing designs: A, B1, B2, C1, C2, D1, and D2. …

Improving Square Skirted Foundations Behavior On Sand, Tamer Al-Shyoukhi, Ayman Altahrany, Mahmoud Elmeligy

Mansoura Engineering Journal

Shallow foundations' behavior is enhanced by using skirts to confine the soil beneath the foundation. The bearing capacity and settlement of skirted foundations resting on the sand are influenced by the size of the skirt cell and shear strength of sand. Experimental modelling was carried out on an axially square-skirted footing resting on sand in this study. Plaxis-3D software was used for numerical analysis to support the experimental results. The numerical analysis results validated the experimental results. The outcomes of the study demonstrated that skirts wider than the footing size increased the bearing capacity of skirted foundations. In the case …

Failure Analysis Of Light Poles On Highway Bridges Exposed To Extreme Winds, Yanlin Chen

LSU Master's Theses

Light poles are critical secondary structural components that support the functionality and safety of transportation systems. However, they are tall slender structures vulnerable to wind load. This research attempts to analyze the mechanism of the widespread failure (69 poles failed) of light poles on an elevated highway bridge exposed to Category 4 Hurricane Laura (2020). To understand the mechanism of the failure, a comprehensive analysis is conducted. A nonlinear finite element model is created to simulate the structural responses. Wind pressures are obtained and applied to the FEM to perform nonlinear static and transient analysis. Research results indicate that, when …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

Investigation Of Ground Deformations And Vibrations Due To Impact Pile Driving: Measurements And Prediction Model, Berk Turkel

Electronic Theses and Dissertations, 2020-2023

Pile driving, a commonly used method for installing deep foundations, has gained prominence as a foundation solution to transfer structural loads to deep competent strata. However, this method of installation can generate noise, ground vibrations, and deformations. These effects pose risks to adjacent structures and buried utilities, jeopardizing the safety and serviceability of urban infrastructure. Researchers and public and private agencies have proposed many vibration limit criteria to avoid damage to infrastructure. However, these criteria for construction vibrations are not linked to the ground densification associated with repetitive and cumulative loadings in sandy soils. This dissertation focuses on developing a …

Investigation And Modification Of Single-Post Aluminum Sign Supports For Mash Crashworthiness, Rodrigo Quintero

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Traffic signs are used to display information to drivers and are one of the most commonly encountered roadside structures. Although they are a vital traffic control device, signs can pose a significant safety risk to errant drivers due to their extensive placement and proximity to the roadway. Therefore, traffic signs and their supports must be designed with crashworthiness in mind to reduce the likelihood of injury in the event of a vehicle impact. Prior to 2009, these systems were evaluated using the crash testing criteria found in the National Cooperative Highway Research Program (NCHRP) Report No. 350 [1]. Currently, they …

System-Of-Systems Integration For Civil Infrastructures Resiliency Toward Multihazard Events, Vahid Balali

Mineta Transportation Institute

Civil infrastructure systems—facilities that supply principal services, such as electricity, water, transportation, etc., to a community—are the backbone of modern society. These systems are frequently subject to multi-hazard events, such as earthquakes. The poor resiliency of these infrastructures results in many human casualties and significant economic losses every year. An outline of a holistic view that considers how different civil infrastructure systems operate independently and how they interact and communicate with each other is required to have a resilient infrastructure system. More specifically a systems engineering approach is required to enable infrastructure to remain resilient in the case of extreme …

Automated Reinforcement In Construction 3d Printing: An Investigation Of Mechanical And Macrostructural Performance Of Reinforced 3d-Printed Structures, Hassan Ahmed

LSU Master's Theses

Conventional construction with steel reinforcement is widely accepted and utilized worldwide for its proven strength, durability, design flexibility, cost-effectiveness, and due to available standards and design codes. Integration of reinforcement in construction 3D printing, however, presents multi-faceted challenges that may influence the structural properties of printed components and have hindered the widespread adoption of reinforced 3D-printed structures. This study explored two complementary reinforcement techniques, namely, steel fibers and threaded reinforcement, to reinforce 3D-printed structures. This study explored both the fresh and hardened properties of 3D-printed mixtures that contain very high steel fiber dosages of up to 2.5% by volume. Additionally, …

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

The Feasibility Of Using High Strength Stainless Steel In Pre-Stressing Applications, Rana Khaled Morsy

Theses and Dissertations

This paper evaluates the applicability of using a corrosion-resistant reinforcement high strength stainless steel strands (HSSS) Duplex 2205 in pre-stressing applications. HSSS-Duplex 2205 is a high performance steel which can be used as an alternative to the conventional carbon steel strands, for a better service life. The high strength and corrosion resistance of the material allows it to show its impressive performance in marine structural applications. Although the use of HSSS-Duplex 2205 could be initially costly; however, the improved durability and extended service life of the concrete structures using HSSS would require less life-cycle cost. Although there is a gap …

Multi-Physics Numerical Simulation Of Corrosion And Service Life Evaluation Of Novel Reinforced Concrete Systems, Jin Fan

Dissertations

Durability challenges of reinforced concrete materials can shorten the service life and increase the carbon footprint of civil infrastructure systems. Novel alternative materials, such as high-performance fiber reinforced cementitious composites (HPFRCCs) and recycled aggregate concrete (RAC), offer an alternative to tradi-tional concrete materials by increasing the service life of infrastructure or reducing raw material consumption, thereby reducing the life-cycle carbon footprint. Due, in part, to a lack of robust numerical tools, predicting the durability response of these emerging cementitious materials has been insufficiently addressed. A time-dependent multi-physics modeling framework is proposed and adopted to investigate the chloride induced deterioration mechanisms …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Program: Senior Projects (Public)

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Evaluation Of The Geotechnical And Foundation Components On Jud Site, Mirabel W. Nkanor

Honors Theses

This thesis is part of the senior design final project of the Civil Engineering Department at the University of Mississippi. Geotechnical and foundation analyses were done on a proposed construction project for a multi-family home in Orlando, Florida. This evaluation done in this thesis follows the pre-existing geotechnical report on the side, USDA soil reports, ASCE Code 32-01 (Design of Foundations), and ASCE-7 Section 12.31.1 (Foundations and Superstructure-to-Foundation Connections).

A structural system was selected from the proposed location, on the corner of South Conway and Judge Road, and an evaluation of the Bearing Load capacity was completed to determine the …

Three-Dimensional Structural Analysis Of Temple 16 And Rosalila At Copan Ruinas, Luis Tuarez

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Temple 16 is an ancient Maya structure located at the heart of the Copán Ruinas Acropolis in Western Honduras. Temple 16 contains several earlier structures within it that were built on top of each other throughout Copán’s history. One of these earlier structures, Rosalila, is one of the most culturally significant structures within the Acropolis due to its preservation. An intricate series of archeological tunnels have been excavated throughout Temple 16 to allow for its study. However, significant cracking has been observed within Rosalila and several tunnels have experienced partial collapse. This not only poses a life safety issue for …

Song’S Site At Los Angeles Eco-Village Redevelopment, Kendall Gilbert, Marina Rios, Kristin Hernandez, Gianna Morelli

Honors Thesis

The Los Angeles Eco-Village (LAEV) is a co-op housing community, located in Koreatown, focused on building sustainable and economically cooperative living in an urban environment. The purpose of this project is to transform a property recently acquired by the LAEV, called Song’s, into a multipurpose community hub. The project design goals established with LAEV founder and community members, include cultivating new highly sustainable and resilient ideas on urban living and incorporating educational elements that inspire the community and visitors to live more sustainably. This project proposes three design elements to improve the community use of the newly acquired Song’s at …

On The Micro-Mechanical Property Characterization And Bulk-Volume Behavior Prediction Of Additively Manufactured 17-4 Ph Stainless Steels, David González-Niño

Graduate Theses and Dissertations

Selective laser melting is an additive manufacturing technology that opens the possibility to manufacture components with complex geometries that are difficult with traditional manufacturing techniques which could benefit engineering applications such as aviation or structural engineering. However, the lack of a reliable universal predictive model for selective laser melting components could impede the full implementation in industrial applications. Therefore, this dissertation investigates the mechanical behavior of selective laser melting 17-4 PH stainless steel under ultra-low cycle fatigue regime and propose a novel micro-mechanical based modeling using statistical and representative volume element. The first phase of this project examined the mechanical …

Experimental Design For Determining The Cyclic Behavior Of Skewed Reduced Beam Section Moment Connections Having Composite Slabs, Paul Chabaud

Graduate Theses and Dissertations

This paper details the experimental design for determining the cyclic behavior of skewed Reduced Beam Section (RBS) moment connections having composite slabs. The effects of composite concrete slabs on skewed RBS connections subjected to cyclic seismic prequalification loading are addressed in this test setup. Full-scale double-sided RBS SMF specimens representing both interior and exterior column connections are designed and fabricated in this work. Experimental test fixturing and a lateral load application setup within the existing Grady E. Harvell Civil Engineering Research and Education Center (CEREC) are designed. All cyclic loading protocols required for the prequalification testing are described herein. Prequalification …

Development Of Self-Stressing Ultra High-Performance Concrete Using Expansive Chemical Admixtures, Lane Edwards

Graduate Theses and Dissertations

This study investigated the effects of expansive chemical admixtures on ultra-high performance concrete (UHPC) and self-stressing mechanisms. A literature review was performed to determine different types of expansive admixtures for feasibility of the self-prestressing concept. Ultimately it was decided that type-k cement, made by combining Komponent admixture with conventional UHPC, was the most suitable option due to its effects on wet and hardened concrete properties. Mix designs with varying amounts of Komponent were developed to test the effects the admixture had on various properties. Tested properties included, workability, compressive strength, expansion, short-term shrinkage, long-term shrinkage, and developed prestress. The development …

An Experimental And Numerical Investigation Of The In-Plane Shear Behavior Of Cantilever Cross-Laminated Timber Diaphragms, Bibek Bhardwaj

All Dissertations

This research focuses on investigating the behavior of Cross Laminated Timber (CLT) diaphragms under in-plane shear loads through an experimental, analytical, and numerical approach. Full-scale destructive tests were conducted on cantilever CLT diaphragms to measure their response to cyclic loading. The results showed that the ultimate capacity of the diaphragms was primarily influenced by the fasteners used and exceeded the LRFD capacity. The primary energy dissipation mechanism was through the slip of diaphragm components and rotation of CLT panels due to fastener deformations. The strain data revealed that the diaphragms exhibited deep-beam-like behavior, with resistance to tensile and compressive forces …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

Understanding The Bond Strength Of Bcsa Cement Repair Concrete To Portland Cement Concrete, Brenden Simmons

Civil Engineering Undergraduate Honors Theses

Concrete structures deteriorate over time, and there is an increasing demand for quick repair solutions. Belitic calcium sulfoaluminate (BCSA) cement, a type of rapid setting cement, is thought to be a more sustainable and convenient alternative to portland cement in repair concrete applications. Indicated by the name, rapid setting concrete can set up quicker than traditional portland cement concrete. Because of this, there has been a lot of research about the properties of rapid setting concrete mixes. One of the most popular topics is the strength of the concrete itself. However, there is a need for more research to understand …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …